Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Flameless Ration Heater Tray Assembly

Active

Federal

Response Deadline09/07/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the manufacture and assembly of flameless ration heater trays designed for use with the Unitized Group Ration Express system. Each heater tray includes a coated fiber-based heating element, an activation fluid unit, and a seal-in-tray heater, all integrated to safely and reliably generate heat without an open flame for field meal preparation. The work requires precise engineering and quality control to ensure consistent performance under operational conditions, with all components meeting military specifications for durability, safety, and environmental resilience. The procurement is classified as a subcontract under NAICS code 332439, managed by DLA Troop Support under the Department of Defense, with performance based in Philadelphia, Pennsylvania, 19111. Proposals must be submitted by September 7, 2026, and the opportunity was posted on August 4, 2026. There is no specified set-aside status, and the contract is open to eligible subcontractors capable of fulfilling the technical and production requirements for military-grade heating systems.

General Info

Manufacture flameless ration heater trays for military use, meeting strict specs, in Philadelphia, bid due September 7, 2026.

Agency

Department Of Defense → DLA Troop SupportView Agency

NAICS

332439 - Other Metal Container ManufacturingView NAICS

Place of Performance

Philadelphia, PA, 19111, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineSep 7

Submission deadline

Response Deadline

09/07/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Troop Support

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Troop Support

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and assemble flameless ration heater trays for Unitized Group Ration Express (UGR-E), including coated fiber-based heating tray, activation fluid unit, and seal-in-tray heater.

Similar Contracts

Same NAICS industry code

CONTAINER, FREIGHT, G

Solicitation # SPE8ED-26-Q-0616

The U.S. Government, through DLA Troop Support under the Department of Defense, has issued a pre-solicitation notice for the procurement of 100 ISO shipping containers measuring 20 feet by 8 feet by 8 feet 6 inches, identified by National Stock Number 8150-01-463-8553. These containers are intended for delivery within the continental United States, with the requirement to be formally solicited in the near future under solicitation number SPE8ED26Q0616. While this notice is not a request for quotes or proposals, it signals the government’s intent to open a competitive procurement process, and all responsible sources are encouraged to prepare and submit bids when the formal solicitation is published on DIBBS. The North American Industry Classification System code for this requirement is 332439, and the solicitation will be managed from the agency’s office in Philadelphia, Pennsylvania. The official response deadline for any future submissions is set for July 27, 2026, at 7:00 p.m. Eastern Time, with the pre-solicitation notice posted on July 21, 2026. Avril Dickerson is listed as the primary point of contact, with her email address provided for inquiries. The procurement is not subject to any specific set-aside, meaning it is open to all eligible contractors without restriction based on small business or other classifications. Interested parties should monitor the SAM.gov portal for the upcoming solicitation to ensure timely submission of proposals in accordance with FAR 5.207(c)(16), which allows any responsible source to respond to government requirements upon formal solicitation.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7L1-26-Q-1450

The contract pertains to the procurement of two mounting brackets identified by NSN 5340-00-602-4977 under solicitation SPE7L1-26-Q-1450, with a delivery requirement of 132 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging, configuration change management, and export control regulations are strictly enforced, including adherence to DFARS 252.225-7048 due to the presence of export-controlled technical data subject to ITAR or EAR. Access to this data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DLA training on handling export-controlled data, and specific authorization from the DLA. The item is procured under full and open competition with no set aside, and the place of performance is designated as New Cumberland, Pennsylvania. All responses must be submitted by August 19, 2026, and the primary point of contact is Jarod More of the Department of Defense’s Land Supply Chain, reachable via email and phone provided.

LAND SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE8ED-26-T-1211

The contract pertains to the procurement of a collapsible JMIC 3.0K item with part number 7517221-2 in TAN color, governed by technical and quality requirements from the DLA Master List, with compliance enforced through MIL-STD-130N for identification marking and ASTM D3951 for packaging unless superseded by higher-priority DLA standards. Packaging must conform to MIL-STD-129 and RP001 guidelines, with strict prohibitions against asbestos and intentional use of mercury or mercury compounds, except in specific functional applications like batteries or calibrated instruments, which must include secondary containment per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. First Article Testing is mandatory and separately contracted, with one unit designated for testing under CLIN 0002, while production lot testing is required for one unit under CLIN 0003. The item must be delivered FOB origin within 220 days, with no variance allowed in quantity, and inspection and acceptance occur at origin. Shipping must be via traceable freight, not parcel post, to the designated military address in Red Bank, NJ, with a required delivery date of July 31, 2026. All documentation references are tied to specific revision-controlled drawings and quality assurance provisions, and the contract includes covered defense information protocols under RD003.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

MODIFICATION KIT, SH

Solicitation # SPE8ED-26-T-1216

The contract pertains to a Modification Kit, SH, identified by part number 55296B and NSN 8145015121012, with a single unit required to be delivered within 20 days from the contract date. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. All technical and quality requirements referenced by R or I numbers must comply with the DLA Master List of Technical and Quality Requirements, which supersedes other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements for Procurement, with palletization following RP001 specifications. The item must be shipped via traceable means, excluding parcel post, and delivered to Fort Hood, Texas, with marking and labeling strictly controlled. The supplier, SharkCage Inc. of Spring Branch, TX, is subject to documentation requirements for source approval and must remove government identification from non-accepted supplies. The contract is issued under solicitation SPE8ED-26-T-1216, with a required delivery date of July 30, 2026, and is governed by federal acquisition protocols under the Department of Defense.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

MODIFICATION KIT, SH

Solicitation # SPE8ED-26-T-1215

The contract outlines the procurement of a single unit of a Modification Kit, SH, identified by NSN 8145015121011 and part number 55295B, supplied by SHARKCAGE INC located in Spring Branch, TX. Delivery is required within 20 days from the contract award, FOB origin, with no tolerance for quantity variance, and both inspection and acceptance occur at the destination. Packaging must adhere strictly to ASTM D3951 and MIL-STD-129, with palletization compliant with DLA’s RP001 packaging requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over any general standards. The item must be shipped by traceable means, excluding parcel post, to the specified delivery address at Fort Hood, TX, and must be marked with the designated government identifier, W4546G62080263, and project code TP 3. The solicitation number is SPE8ED-26-T-1215, with a response deadline of August 17, 2026, and the required delivery date is July 30, 2026. All documentation, including source approval, must follow RC001 guidelines, and the contractor must ensure removal of any government identification from non-accepted supplies per RQ011. Covered Defense Information may apply, and the unit of issue is each, with the purchase request number 7017722200.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

SUPPORT, SHIPPING AN

Solicitation # SPE8ED-26-T-1218

This contract pertains to the procurement of one unit of material identified by NSN 8145017350446 and part number 20943-002 under solicitation SPE8ED-26-T-1218, issued by the Department of Defense through the Defense Logistics Agency. The requirement is for delivery within 20 days to a destination address in APO, AP 96278-2069, with FOB destination terms, meaning the supplier bears all costs and risks until delivery is completed. Inspection and acceptance occur at the destination, with no variance allowed in quantity—the exact one-unit requirement must be met. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, and marking must adhere to MIL-STD-129 without special codes. Palletization follows DLA’s packaging standards, and transportation details reference specific DLA procedural notes for both first destination and freight shipping, with an alternate shipping address in Pyeongtaek, South Korea. The contract incorporates technical and quality requirements referenced by R and I numbers from the DLA Master List, applicable based on the solicitation issuance date. Documentation requirements for source approval are mandatory, and the item is subject to Covered Defense Information protocols. The seller must provide all required supporting documentation, including source approval and compliance attestations, and is expected to meet the original required delivery date of July 31, 2026. The point of contact for the contract is Ogden Howard, with details for inquiries provided. The item falls under NAICS code 332439 for construction and equipment containers, and while no set-aside designation is specified, the procurement adheres to full DLA procedures including unit of issue alignment with ANSI X12 standards as referenced in official DLA documentation.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

SUPPORT, SHIPPING AN

Solicitation # SPE8ED-26-T-1213

SharkCage Inc. is contracted to supply four units of cradle kit with part number 150475 and NSN 8145-01-512-1025 under solicitation SPE8ED-26-T-1213, with a unit price of $4.00 and a total contract value of $16.00. Delivery is required within 20 days of contract award, FOB destination, with zero variance allowed in quantity. Inspection and acceptance occur at the delivery destination, and packaging must meet MIL-STD-2073-1E standards with specified preservation methods and marking in compliance with MIL-STD-129, including no special marking codes. The items are to be delivered to APO AP 96278-2069, with the primary shipping address located at Osan AB in South Korea. The contract incorporates technical and quality requirements from the DLA Master List, including provisions for removal of government identification from non-accepted supplies, documentation for source approval requests, and potential application of covered defense information protocols. The required delivery date is July 31, 2026, with a procurement request number of 7017726930 and project code TP 3. All unit of issue conversions must reference the official DoD ANSI X12 guidelines, and transportation directives follow DLAD Proc Notes C19 and C20.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

MODIFICATION KIT, SH

Solicitation # SPE8ED-26-T-1214

The contract is for a Modification Kit, SH, with part number 55241B and NSN 814501-512-0903, requiring delivery of two units within twenty days from the award date, FOB origin. The supplier, SHARKCAGE INC located in Spring Branch, TX, must comply with all DLA packaging requirements as outlined in RP001, including adherence to MIL-STD-129 for marking and labeling, and ASTM D3951 for packaging, with DLA’s Master List of Technical and Quality Requirements taking precedence. The unit of issue is EA, with zero variance allowed in quantity, and inspection and acceptance occur at the destination. The items must be shipped via traceable means, excluding parcel post, to the specified military delivery point at Fort Hood, TX. All packaging, palletization, and documentation must follow DLA standards, and government identification must be removed from non-accepted supplies per RQ011. Technical and quality specifications referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date. The delivery is tracked under contract SPE8ED-26-T-1214, with a required delivery date of July 30, 2026, and a unique transport control number W4546G62080270. The contract is subject to potential handling of covered defense information under RD003, and documentation related to source approval requests must be submitted as required by RC001.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

COVER, SHIPPING AND STO

Solicitation # SPE4A7-26-T-613Z

The contract pertains to the supply of a shipping and storage container designated by NSN 8140-01-495-5027, with a quantity of 64 units, under solicitation SPE4A7-26-T-613Z. Delivery is required within 171 days after award, and the contract includes strict compliance with Defense Logistics Agency packaging standards, technical and quality requirements referenced from the DLA Master List, and specific inspection and acceptance protocols. Sampling must adhere to MIL-STD-1916 or comparable zero-based plans, with attributes classified under defined verification levels or AQLs, and acceptance criteria mandate zero non-conformances unless otherwise stipulated. The item is subject to export control under ITAR or EAR, prohibiting unauthorized disclosure or transfer of technical data to foreign persons or entities, regardless of location, with DFARS 252.225-7048 governing compliance. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and explicit authorization may access the controlled technical data. Configuration changes require formal engineering change proposals, and cybersecurity requirements mandate CMMC Level 2 certification by a certified third-party assessment organization. Inspection and acceptance must occur at the manufacturer’s origin, and all non-accepted supplies must have government identification removed prior to return. The physical identification of the bare item must be marked per RQ017, and the contract mandates strict adherence to configuration management and change control procedures. The point of contact for inquiries is Jessica Gentry of the Department of Defense, with performance located in New Cumberland, Pennsylvania. The solicitation was posted on August 4, 2026, with responses due by August 12, 2026, and the North American Industry Classification System code is 332439 for other fabricated metal product manufacturing.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 17 hours ago

DEADLINE

MODIFICATION KIT, SH

Solicitation # SPE8ED-26-T-1210

The contract pertains to the procurement of one unit of a Modification Kit, SH, identified by NSN 8145-01-512-0983 and part number 55262, supplied by SHARKCAGE INC. The item is classified as a commercial item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling, and palletization must follow RP001: DLA Packaging Requirements for Procurement. Delivery is required within 20 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination point located at Fort Hood, Texas. The item must be shipped by traceable means, excluding parcel post, and is to be delivered to the specified government facility. The contract is issued under solicitation SPE8ED-26-T-1210, with an original required delivery date of July 31, 2026. Government-specific identifiers including contract data, shipping codes, and administrative codes are provided for internal use, and the point of contact for inquiries is Ogden Howard of the Department of Defense.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

SHIPPING AND STORAG

Solicitation # SPE8ED-26-T-1212

The contract pertains to the procurement of one unit of item P/N IM2600-X0000, identified by NSN 8145016413213, sourced from Hardigg Industries, LLC and Pelican Products, Inc., with delivery required FOB origin within ten days of contract award. All packaging must comply with ASTM D3951, but is subject to precedence by the DLA Master List of Technical and Quality Requirements, with specific markings and labeling mandated by MIL-STD-129. Palletization must adhere to DLA Packaging Requirements for Procurement, and the unit of issue is a single EA with no tolerance for variance in quantity. The item is destined for US Army SSA Powidz AB in Poland, with shipping instructions referencing DLAD Proc Notes C19 and C20, and the delivery is marked for W9005D with associated tracking and project identifiers. The contract prohibits removal of government identification from non-accepted supplies and requires full compliance with documentation standards for source approval requests, while also acknowledging potential applicability of Covered Defense Information protocols. The required delivery date is July 31, 2026, and the solicitation number is SPE8ED-26-T-1212, issued under a federal acquisition framework with the NAICS code 332439.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 17 hours ago

DEADLINE

81--SHIPPING AND STORAG

Solicitation # SPRPA126RVC31

The contract involves the procurement of 30 units of NSN 6K-8145-012622982-YX, with delivery terms specified as FOB origin, meaning the buyer assumes responsibility for the item once it leaves the supplier’s location. Engineering source approval is mandatory to ensure part quality, as only qualified sources possess the unique design capabilities, specialized engineering skills, and proprietary manufacturing or repair knowledge essential to maintaining performance standards. These approved sources hold exclusive data rights and technical information that are not economically accessible to the Government, making source restriction necessary. Any alternative supplier must undergo formal qualification through procedures approved by the cognizant Government engineering activity responsible for the part’s intended application, ensuring compliance with designated quality and technical requirements. This is a presolicitation notice issued under solicitation number SPRPA126RVC31, with a response deadline of September 2, 2026, and is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility to small businesses. The requirement is managed by the Department of Defense through the DLA Aviation office in Philadelphia, Pennsylvania, with the primary point of contact being Makayla Hauser of APAC.41. The part’s technical specifications and sourcing restrictions indicate a reliance on niche suppliers with established expertise, and the Government retains strict oversight over qualification processes to safeguard mission-critical performance and supply chain integrity.

Pa DLA Aviation At Philadelphia

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Troop Support

Same awarding agency

Testing and Quality Assurance Services (QA/QC)The contract seeks third-party testing services to validate the environmental, electrical, and durability performance of mask light assemblies against stringent military standards including MIL-STD-810 and MIL-STD-202. These tests are critical to ensure the equipment can withstand extreme conditions encountered in military operations, such as temperature extremes, humidity, vibration, shock, and electromagnetic interference. The work will be performed in Philadelphia, and the scope includes comprehensive quality assurance and quality control procedures to confirm compliance, deliver verifiable data, and support certification requirements for deployment. This subcontract is issued under NAICS code 541380 for other scientific and technical consulting services and is managed by the Department of Defense through DLA Troop Support. The solicitation was posted on August 4, 2026, with a strict response deadline of September 4, 2026, at 7:00 PM Eastern Time. Interested parties must demonstrate technical expertise in military-grade testing protocols, established laboratory capabilities, and a proven track record of delivering accurate, auditable test results aligned with defense specifications. No set-aside provisions are specified, indicating open competition among qualified vendors.

Testing Laboratories and Services

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Precision Metal Stamping and Spring Component SupplyThe contract requires the manufacture of small metal clips, springs, and conductive components specifically designed for use in mask light switches and mounting hardware, with stringent demands for tight tolerances and corrosion resistance to ensure reliability in demanding environments. The components must meet exacting engineering specifications to function properly within critical defense systems, necessitating advanced precision metal stamping and spring fabrication capabilities. All work must be performed in compliance with defense industry standards for quality, durability, and material integrity. This subcontract opportunity is issued under NAICS code 332618 and is administered by the Department of Defense through DLA Troop Support, with performance required in Philadelphia. Interested parties must submit responses by the deadline of September 4, 2026, to be considered for award. The solicitation does not specify a set-aside status, and while no point of contact is provided, the opportunity is publicly accessible via the SAM.gov platform for further details and application submission.

Other Fabricated Wire Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Electrical Wiring and Connector Harness FabricationThe contract calls for the fabrication of miniature, high-reliability wiring harnesses and connectors specifically designed for internal electrical routing within oxygen mask light assemblies. These components must meet stringent performance standards to ensure operational integrity in critical environmental conditions, with precision manufacturing and rigorous quality controls being essential to guarantee consistency and durability. The work is intended for use in defense-related life-support equipment, necessitating materials and assembly techniques that withstand extreme stress, vibration, and exposure to oxygen-rich atmospheres. This is a subcontract opportunity posted by DLA Troop Support under the Department of Defense, with a North American Industry Classification System code of 335313, indicating specialization in electrical equipment manufacturing. The response deadline is September 4, 2026, and performance is expected to take place in Philadelphia. Although the solicitation number and point of contact details are not provided, the place of performance and agency involvement confirm the contract’s alignment with military logistics and personnel protection systems, requiring proposers to demonstrate proven experience with miniaturized, mission-critical electrical systems in defense applications.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Miniature LED Lighting Module SupplyThe contract solicits the supply of ruggedized, low-voltage LED modules specifically engineered for integration into aviation mask light assemblies, requiring stringent resistance to vibration and thermal stress to ensure reliable performance in harsh aerospace environments. These modules must meet exacting mechanical and environmental standards to function consistently under extreme conditions typical of military aviation use, with a focus on durability, energy efficiency, and long-term operational stability. The procurement is structured as a subcontract under NAICS code 334418, indicating classification within the other computer equipment manufacturing sector, and is being managed by DLA Troop Support under the Department of Defense to support critical defense systems. The contract was posted on August 4, 2026, with a firm response deadline of September 4, 2026, at 7:00 PM, allowing potential suppliers a thirty-one-day window to submit proposals. Performance will be localized to Philadelphia, though no specific address or point of contact details are provided. The solicitation does not designate a set-aside type, indicating it is open to all eligible vendors without restrictions based on small business, veteran-owned, or other categories. Bidders must be prepared to demonstrate technical capability, production capacity, and adherence to military-grade ruggedization standards without reliance on external documentation or cited compliance frameworks.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Precision Injection Molding of Light Housing ComponentsThis contract involves the precision injection molding of plastic or composite housing components specifically designed for aviation oxygen mask light assemblies, requiring adherence to strict military specifications. The work demands high tolerances, consistent material integrity, and reliable performance under demanding operational conditions, typical of defense aerospace applications. The manufacturer must demonstrate capability in advanced molding processes, quality control systems, and compliance with the necessary defense standards to ensure safety and functionality in mission-critical environments. The contract is classified as a subcontract under NAICS code 326199, with a response deadline of September 4, 2026, and is sponsored by the Department of Defense through DLA Troop Support. Performance is expected to take place in Philadelphia, and the procurement is open to qualified suppliers capable of meeting the technical and regulatory requirements without a specified set-aside designation. Interested parties must respond by the deadline to be considered for award, with no public point of contact listed and full details accessible through the provided SAM.gov link.

All Other Plastics Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Packaging Materials SupplyThe contract involves the supply of military-compliant packaging materials specifically designed for food storage and preservation, including laminated barrier pouches, accessory bags, and ISPM 15-compliant wood packaging. These materials must meet strict military standards to ensure durability, environmental protection, and compliance with international phytosanitary regulations for wood packaging. The products are intended for use by the Department of Defense through DLA Troop Support to support logistical and operational needs in field and garrison environments. The opportunity is classified as a subcontract with a response deadline of September 7, 2026, and was posted on August 4, 2026. The North American Industry Classification System code 322220 indicates the focus on paper product manufacturing, aligning with the production of specialized packaging solutions. Performance is required to be completed at or delivered to Philadelphia with a ZIP code of 19111, and all vendors must ensure their offerings fully comply with military specifications for material integrity, containment, and shelf-life preservation under austere conditions.

Paper Bag and Coated and Treated Paper Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Pull Tab ManufacturingThe contract requires the manufacture of precision polyethylene pull tabs designed for one-step activation of four-tray UGR-E food systems, with all components strictly adhering to MIL-DTL-32235/4 military specifications. These pull tabs are critical components in field rations, ensuring reliable and user-friendly access to meals under operational conditions, and must meet exacting standards for material composition, dimensional accuracy, and functional performance. The work is to be performed at a facility in Philadelphia with a zip code of 19111, and the manufacturing process must conform to the defined technical requirements without exception. This is a subcontract opportunity under the NAICS code 326199, issued by DLA Troop Support on behalf of the Department of Defense. The solicitation was posted on August 4, 2026, with a firm deadline for responses set for September 7, 2026, at 7:00 PM Eastern Time. The contract does not specify a set-aside classification or small business preference, and no point of contact information is provided in the data, though full details are accessible through the designated SAM.gov workspace link. Suppliers must be prepared to demonstrate compliance with military standards and possess the capability to produce high-volume, precision-molded components with consistent quality control.

All Other Plastics Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Boil-in-Bag (BIB) Egg Module AssemblyThe contract involves the manufacture and assembly of Boil-in-Bag egg modules designed for use with the Unitized Group Ration-Express (UGR-E). Each module includes freeze-dried egg, a water pouch, a heater, activation fluid, a serving tray, and an instruction sheet, all integrated into a functional, ready-to-use meal component. The work must be performed in accordance with military specifications to ensure safety, durability, and performance under field conditions. The project is classified as a subcontract under NAICS code 311999, indicating it falls under other food manufacturing, and is being managed by the Department of Defense through DLA Troop Support. The place of performance is designated as Philadelphia with a ZIP code of 19111, and all components must be fully assembled and tested to meet operational requirements. The solicitation was posted on August 4, 2026, with a response deadline of September 7, 2026, at 7:00 PM. Submissions are expected from qualified vendors capable of high-volume production and strict quality control, as the finished modules are critical to sustaining troops in expeditionary environments. While the contract does not specify a set-aside status or particular small business preferences, compliance with defense industry standards and delivery timelines will be essential for award. The final product must be packaged, labeled, and ready for integration into UGR-E rations, ensuring consistency and reliability across all issued units.

All Other Miscellaneous Food Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

UGR-E Heater Trays

Solicitation # SPE3S126R0009

The UGR-E Heater Trays solicitation, identified by number SPE3S1-26-R-0009, is issued by the Defense Logistics Agency Troop Support under the Department of Defense, with the primary point of contact being James Kahn at the Philadelphia office in Pennsylvania. The solicitation, posted on August 4, 2026, requires responses by September 7, 2026, at 7:00 PM Eastern Time, and is open to all eligible offerors with no specific set-aside requirements. The North American Industry Classification System code is 311999, indicating it relates to other food manufacturing, and the place of performance is designated as Philadelphia, Pennsylvania, with the same zip code as the office address. Primary and secondary points of contact are provided for inquiries, and any issues accessing the solicitation attachments should be directed to James Kahn’s email. The opportunity is accessible via the SAM.gov platform for interested vendors to review details and submit proposals.

All Other Miscellaneous Food Manufacturing

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Food Equipment Ft Lee

Solicitation # 7017590626

The U.S. Department of Defense, through DLA Troop Support, has issued a request for interest regarding food service equipment and potential installation services at Fort Lee, Virginia. This is not a formal solicitation but an informational gathering to assess industry capability and interest. The equipment under consideration includes a wide range of food service items such as pizza preparation refrigerators, conveyor ovens, roll-in refrigerators, heated food warmer shelves, mobile counters with sneeze guards, mobile pleate and dish dispensers, hot food wells, heated cabinets, work tables, possible modifications to existing food stations, rotisserie ovens, induction ranges, refrigerated display cases, sandwich and salad preparation refrigerators, wire shelving, soup kettles, ice makers, pizza pans, small wares, containers, and china sets. Interested parties must respond by the deadline of August 7, 2026, at 7:00 PM Eastern Time, with submissions directed to the primary point of contact, Adam Pollini, at adam.pollini@dla.mil or 215-737-0766, with Timothy Coyle as the secondary contact. The office handling this request is located in Philadelphia, Pennsylvania, and the anticipated performance location is Fort Lee, Virginia. This request seeks feedback on availability, lead times, and technical specifications to inform a potential future solicitation.

Showcase, Partition, Shelving, and Locker Manufacturing

POSTED

DEADLINE

Army Green Service Uniform All Weather Coat

Solicitation # SPE1C126R0115

This contract solicitation, identified as SPE1C1-26-R-0115, is a total small business set-aside for the procurement of Men’s Army Green Service Uniform (AGSU) All-Weather Coats (AWC) under NSN 8405-01-683-8982 and PGC 00181, manufactured in strict compliance with MIL-DTL-32768A with Amendment 1, effective March 31, 2026, and pattern specifications dated May 22, 2026. The acquisition is structured as two separate Indefinite Delivery/Indefinite Quantity (IDIQ), Firm Fixed Price contracts, each with a 50% split of the total requirement, ensuring equal opportunity for small businesses. Each lot carries a guaranteed minimum order of 16,650 units annually over a 60-month period, with an Annual Estimated Quantity of 66,600 units and a maximum capacity of 499,500 units per lot across the contract term. All items must be 100% manufactured in the United States using 100% U.S.-sourced materials, adhering to the requirements of the Berry Amendment and DFARS 252.225-7012, with no foreign content permitted. Pricing is strictly based on F.O.B. Destination for all deliveries, with inspection and acceptance occurring at the destination for standard orders and at the origin only for depot stock orders. The initial delivery will be sent to the Travis Association for the Blind in Austin, TX, with subsequent orders issued every 120 days after award. Evaluation for award is based on a trade-off process where technical merit is prioritized over price, in the order of Product Demonstration Models (PDM), Past Performance Confidence Assessment, and Proposed Price. Offerors must submit one PDM of size 40R from each proposed place of performance, and must also provide their past performance history from the prior three years. The solicitation explicitly prohibits Lowest Price Technically Acceptable (LPTA) evaluation and allows for award to be made to the offeror with the highest overall value, not necessarily the lowest price. Packaging and labeling must conform to MIL-S-29368, MIL-STD-129 with Change Notice 3, and MIL-DTL-32075,

Apparel Knitting Mills

POSTED

DEADLINE

Final Packaging and PreservationThis contract requires the final packaging and preservation of finished coats in strict accordance with military standards to ensure complete protection during transport and storage. The work demands the use of preservation methods that safeguard both the material integrity of the coats and the legibility of all labels, ensuring long-term readiness and usability. All packaging must meet stringent defense specifications to prevent degradation, contamination, or damage under varying environmental conditions encountered during logistical operations. The opportunity is a subcontract under a Small Business Set Aside designation, fully reserved for small businesses as defined by the SBA. It is classified under NAICS code 424210, indicating a focus on apparel and accessory merchant wholesalers. The contract was posted on July 28, 2026, with a response deadline of August 12, 2026, at 7:00 PM. Performance is expected to occur at a location identified by the ZIP code 57551, under the oversight of DLA Troop Support, a division of the Department of Defense. Participation requires full compliance with military packaging protocols and a commitment to maintaining the highest standards of quality and accountability.

Drugs and Druggists' Sundries Merchant Wholesalers

POSTED

DEADLINE