Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Floating Island Matrix Materials and Assembly

Active

State & Local

Response Deadline10/22/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for North Carolina State University involves the supply and fabrication of structural floating matrices for wetland islands located in Bolivia, NC. The selected provider will be responsible for creating structural assemblies using buoyancy modules and frames specifically designed to support wetland vegetation while resisting degradation from the pond environment. The contractor must ensure all operations comply with OSHA standards as well as state and federal clean air and water pollution requirements. The scope of work concludes with the delivery of the completed floating island structural assemblies. The solicitation was posted on September 22, 2026, with a response deadline of October 22, 2026.

General Info

Subcontract for fabricating structural floating wetland island matrices for North Carolina State University.

Agency

North Carolina State UniversityView Agency

NAICS

332312 - Fabricated Structural Metal ManufacturingView NAICS

Place of Performance

NC, USA

Set-Aside

NONE

Documents

This scope was carved out of 63-KGS1189177.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Installation of Floating Wetland Islands (Construction Services)

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 22

subcontract

Response DeadlineOct 22

Submission deadline

Response Deadline

10/22/2026, 07:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNorth Carolina State University

ContactsNo contacts available

OfficeN/A

Organization / Agency

North Carolina State University

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and fabricates the structural floating matrix for wetland islands for prime contractors on North Carolina State University projects in Bolivia, NC. Fabricates floating island structural assemblies using buoyancy modules and structural frames designed to support wetland plants and resist pond environment degradation. Must meet OSHA and state/federal clean air and water pollution requirements. Delivers completed floating island structural assemblies.

Similar Contracts

Same NAICS industry code

ACE-0620-1199-00 Tower Design and Fabrication for Various RCAG/RTR Sites (TXK-A, GRI-B, and ARG)

Solicitation # ace-0620-1199-00-tower-design-fabrication-various-rcagrtr-sites-txk-gri-b-arg

Parsons Corporation is soliciting bids for the design, fabrication, and delivery of towers for various RCAG/RTR sites located in Texas, Nebraska, and Arkansas, specifically targeting the TXK-A, GRI-B, and ARG locations. This project falls under NAICS code 332312 and requires the selected offeror to be fully bonded and insured. The opportunity is set aside for various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses. Interested parties must submit their responses by September 25, 2026, with Thomas Sheehan serving as the primary point of contact for the solicitation.

Parsons Corporation

POSTED

about 5 hours ago

DEADLINE

Storage Locker SupplyThis subcontract opportunity involves the supply of storage lockers for prime contractors on Department of Defense hardware procurement projects. The selected provider is responsible for manufacturing or sourcing locker units that meet strict government specifications, applying Unique Item Identification to applicable items, and reporting that data through the IUID Registry or Wide Area WorkFlow. Compliance with DoD IUID standards and the possession of appropriate marking equipment are mandatory requirements for the delivery of the lockers and associated data reports. The contract is a total Small Business Set Aside under NAICS code 332312, managed by the Department of Defense through the W7NR Uspfo Activity Nyang 107. Performance will take place in zip code 13211. The solicitation was posted on September 23, 2026, with a response deadline of September 25, 2026.

W7NR Uspfo Activity Nyang 107

POSTED

about 9 hours ago

DEADLINE

Stainless Steel Enclosure and Frame FabricationThis subcontract involves the fabrication of welded stainless steel structural electrical panels, support frames, and enclosures for prime contractors working on Department of Energy projects at ORNL UT-Battelle LLC. The contractor is responsible for delivering completed cabinet enclosures and support frames, ensuring all welding and fabrication of structural components strictly adhere to AWS D1.6/D1.6M - 2017 or later standards. To successfully execute this contract, the provider must possess precision welding equipment and the capacity to handle Export Controlled Information. The work falls under NAICS code 332312 and is managed by the Department of Energy through the ORNL UT-Battelle LLC contractor.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

about 17 hours ago

DEADLINE

Traffic Signal Pole & Mast Arm FabricationThis subcontract involves the fabrication of steel MonoLever design traffic signal support structures for prime contractors working on municipal projects in Lawrence, Kansas. The scope of work includes the production of steel poles and cantilevered arms, the welding of 1 inch diameter pipe nipples between mounting plates and luminaire arms, and the field drilling of 1.25 inch diameter cable entrance holes. All fabrication must strictly adhere to the project's structural and aesthetic plans. The contractor is responsible for the delivery of the completed signal poles and mast arms. This opportunity is categorized under NAICS code 332312 and is managed by MSO - CMED for the state of Kansas. The response deadline for this procurement is October 13, 2026.

POSTED

DEADLINE

Metal Bar Supplier (4.5" Diameter)This subcontract involves the supply of precision-cut metal bars for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment contracts. The supplier is responsible for producing or sourcing bars with a 4.500 inch diameter and lengths ranging from 10 to 12 feet, maintaining a reference weight of 54.075 LB/FT. All deliverables must adhere to NSN 005555187 specifications and the DLA Master List of Technical and Quality Requirements, with an allowable physical variance of +10% / -0%. The opportunity is categorized under NAICS code 332312 and is managed by the Department of Defense. Performance is centered in Westhampton Beach, New York. Interested parties must submit their responses by October 5, 2026, following the posting date of September 22, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Fabrication and Supply of Mounting Brackets (NSN 5340015664756)This subcontract involves the fabrication and supply of mounting brackets under NSN 5340015664756 for prime contractors supporting DLA supply contracts. The selected provider will manufacture hardware components according to the specified Technical Data Package using precision machining, bending, or metal cutting processes. The contract is managed by the Department of Defense Land Supply Chain and falls under NAICS code 332312. Strict adherence to DFARS regulations regarding specialty metals is required, and the use of Class I Ozone Depleting Chemicals is prohibited. The solicitation was posted on September 22, 2026, with a response deadline of October 7, 2026.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Hoisting Beam Fabrication and SupplyThis subcontract involves the fabrication and supply of one hoisting beam, identified by NSN 3940994506562, for prime contractors supporting DLA Troop Support supply contracts. The manufacturer must ensure the beam meets all NSN specifications and the DLA Master List of Technical and Quality Requirements. Compliance with DFARS 252.223-7008 regarding the prohibition of Hexavalent Chromium and DFARS 252.225-7048 for export control is mandatory, with final delivery to DLA Distribution. The project is designated as a Total Small Business Set-Aside under NAICS code 332312 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on September 22, 2026, with a response deadline of October 5, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Modification Kits (NSN 8145-01-512-0909)

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Ship's Bell Supplier/ManufacturerThis subcontract with the Department of Defense ASC Commodities Division requires the manufacture or sourcing of 14 maritime-grade bronze or brass ship's bells under NSN 6350-01-510-3385. The supplier must ensure all units meet specific technical requirements and provide Safety Data Sheets for any coatings used. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must hold CMMC Level 2 certification to ensure the secure handling of sensitive data. The solicitation was posted on September 22, 2026, with a response deadline of September 30, 2026. This effort falls under NAICS code 332312 and supports prime contractors delivering DLA supply contracts.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Mounting Bracket Manufacturer/SupplierThis subcontract through the Land Supply Chain for the Department of Defense requires the manufacture or sourcing of two mounting brackets meeting technical specifications for NSN 5340014186751. The supplier must adhere to RP001 DLA Packaging Requirements, RQ011 identification standards, and 29 CFR 1910.1200 for hazardous material labeling. Performance will take place in New Cumberland, Pennsylvania. Eligible providers must possess a valid CAGE code and maintain NIST SP 800-171 compliance. The opportunity was posted on September 22, 2026, with a response deadline of September 25, 2026, falling under NAICS code 332312.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Fabrication of Metal Cradle FrameworkThis subcontract involves the fabrication of structural metal frames for shipping and storage cradle kits used by prime contractors delivering DLA Troop Support containers. The selected provider will be responsible for cutting, welding, and assembling metal components according to NSN 8145-01-512-1025 specifications, utilizing CNC plasma cutters and industrial welding equipment. All work must be performed by AWS certified personnel and strictly adhere to DLA quality inspection standards. The project is managed by Construction and Equipment Containers under the Department of Defense, with the place of performance located at Langley AFB. Interested parties must submit their responses by October 5, 2026, in accordance with NAICS code 332312. The final deliverable is the completed metal frame and cradle structure.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Vehicular Radiator Armor Shield SupplierThis subcontract involves the manufacture and supply of 33 Left Hand Radiator Armor Shields under NSN 2510-01-185-3107 for the Department of Defense, specifically supporting DLA Land and Maritime contracts. The supplier is required to use armor-grade materials and precision fabrication equipment to ensure all components meet the DLA Master List of Technical and Quality Requirements. The project falls under NAICS code 332312 and is managed by the Land Supplier Opns Vehicle Spt agency. Performance of the contract will take place in New Cumberland, Pennsylvania, with a response deadline set for October 5, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

More opportunities from North Carolina State University

Same awarding agency

Office Furniture and Workstation SupplyThis subcontract for North Carolina State University involves the supply and installation of office furniture for lease projects. The scope of work includes the delivery and assembly of ergonomic workstations, a ten seat conference room table with chairs, reception seating, and storage shelving. All provided furniture must adhere to ADA compliant heights and clearances to ensure a fully furnished office space that aligns with the specified floor plan. The project is categorized under NAICS code 423220 and was posted on September 22, 2026, with a response deadline of September 29, 2026. The contractor will operate as a subcontractor to prime contractors to fulfill the furniture requirements for the university's office lease projects.

Home Furnishing Merchant Wholesalers

POSTED

DEADLINE

Commercial Janitorial ServicesThis subcontract for Commercial Janitorial Services supports prime contractors on North Carolina State University office lease projects. The scope of work involves providing consistent cleaning and maintenance for various spaces, including offices, conference rooms, break rooms, and common areas, through both daily and weekly service schedules. In addition to general cleaning, the contractor is responsible for managing waste and recycling streams for cardboard, waste paper, aluminum, and plastics. The primary objective is to ensure a maintained clean office environment and a comprehensive managed recycling program under NAICS code 561720.

Janitorial Services

POSTED

DEADLINE

Asbestos and Lead-Based Paint Certification/RemediationThis subcontract for North Carolina State University involves providing environmental testing and abatement services for office lease projects. The selected contractor will be responsible for sampling and testing for asbestos and lead-based paint, as well as the removal and disposal of hazardous materials utilizing specialized containment systems. To qualify, the provider must hold certified asbestos and lead abatement licenses and is required to deliver final certifications and reports confirming that buildings are free of these hazardous materials. The project falls under NAICS code 562910 and was posted on September 22, 2026, with a response deadline of September 29, 2026. The contractor will operate as a subcontractor to prime contractors to ensure all environmental safety standards are met for the university's facilities.

Remediation Services

POSTED

DEADLINE

Office Interior Build-Out & Space ConfigurationThis subcontract for North Carolina State University involves the interior build-out and space configuration of office lease projects in Raleigh, NC. The scope of work includes framing, drywall installation, painting, and flooring to create a turnkey environment featuring private offices, open workstations, a ten-seat conference room, a reception area, a break room, and storage spaces. The project requires the use of commercial-grade finishes and materials with recycled content, ensuring all work complies with ADA standards and local building codes. This opportunity was posted on September 22, 2026, with a response deadline of September 29, 2026, under NAICS code 236220.

Commercial and Institutional Building Construction

POSTED

DEADLINE

Site Setup, Permitting, and CleanupThis subcontract for North Carolina State University involves providing comprehensive logistical support for projects located in Bolivia, North Carolina. The selected contractor is responsible for the initial mobilization of equipment, securing all required local permits, and managing the overall site setup to support prime contractors. Upon completion of the construction phase, the contractor must perform final site restoration and post-construction cleanup using specialized transport and cleaning equipment. The primary deliverables for this engagement include a fully prepared project site and a detailed final cleanup report. The solicitation was posted on September 22, 2026, with a response deadline of October 22, 2026, under NAICS code 238990.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Wetland Plant Procurement and Planting LaborThis subcontract for Wetland Plant Procurement and Planting Labor supports North Carolina State University projects located in Bolivia, NC. The selected provider will be responsible for sourcing native wetland-appropriate plant species, including stems and plugs, and performing the necessary planting labor to ensure a specific density of 0.5 stems per square foot. Additionally, the scope of work includes the delivery of planted floating islands that meet these established density requirements. The opportunity is categorized under NAICS code 561730 and was posted on September 22, 2026, with a response deadline of October 22, 2026. The contract is designed for a subcontractor to provide specialized botanical supplies and labor to prime contractors managing the university's environmental projects.

Landscaping Services

POSTED

DEADLINE

FWI Anchor Systems Hardware and InstallationThe FWI Anchor Systems Hardware and Installation subcontract involves the supply and installation of anchoring hardware for floating islands on North Carolina State University projects located in Bolivia, NC. The scope of work focuses on preventing island drift through the implementation of marine-grade cables, weights, and tensioning systems, ensuring all installations adhere to standard marine and construction safety practices to deliver fully secured floating islands. This opportunity was posted on September 22, 2026, with a response deadline of October 22, 2026. Classified under NAICS code 238990, the contract is managed by North Carolina State University and is intended for providers capable of executing specialized marine anchoring services for prime contractors.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Acquisition By Lease - NC State University - DASA/TRIO Programs

Solicitation # 63-RFP-9.2026

North Carolina State University is seeking proposals to lease approximately 3,000 square feet of turnkey office space in Raleigh, NC, for the DASA TRIO Programs division. The required space must be located within a 10-mile radius of the main campus and include a reception area, private offices, open workstation space, a 10-seat conference room, a break room, a work/copy room, and storage. The lease is intended for a three-year initial term with two optional one-year renewals, with a required commencement date of July 2027. On-site parking is mandatory, and the facility must be completely free of hazardous asbestos and lead paint. Proposals must be submitted via the eVP portal and include a scaled floor plan and the university's standard space lease form. The space must comply with the Americans with Disabilities Act of 1990, OSHA provisions for the handicapped, and State Building Code Volumes I-V. Additionally, the university requires that rental rates do not include indeterminable percentage increases, such as uncapped CPI increases, during the initial term or any renewal periods. The university also supports the use of recycled materials in construction and requires facilities for handling recyclable materials.

Lessors of Nonresidential Buildings (except Miniwarehouses)

POSTED

DEADLINE

Installation of Floating Wetland Islands (Construction Services)

Solicitation # 63-KGS1189177

North Carolina State University is soliciting proposals for the turn-key installation of floating wetland island systems at two wetponds located at the Brunswick County Government complex in Bolivia, North Carolina. The project aims to enhance water quality through new pollutant removal mechanisms, requiring the installation of systems with surface area coverage of 550 square feet for the North Pond and 1,300 square feet for the South Pond. The contractor is responsible for mobilization, permitting, sourcing and planting wetland vegetation at a minimum density of 0.5 stems per square foot, and ensuring the floating mat structures have a verified design life of at least three years under continuous immersion. The contract will be awarded based on the best overall value, with evaluation weighted 60 percent on technical factors and 40 percent on cost. Technical criteria include the project approach, resources, and evidence of three representative past projects. The successful contractor must guarantee a minimum 85 percent plant survival and surface coverage, supported by a six-month plant warranty and a 12-month structural warranty. All work must be completed, inspected, and accepted by the University Project Manager within six weeks of the award date, with an estimated award occurring in November 2026. Payment is set at Net 30 days from the receipt of a proper invoice. Proposals must be submitted electronically via the Bonfire portal by October 22, 2026.

Landscaping Services

POSTED

DEADLINE

Supply of High-Grade Stainless Steel Plate/SheetThis subcontract involves the supply of high-grade stainless steel plate and sheet for prime contractors working on North Carolina State University research projects. The scope of work includes sourcing and delivering materials that meet specific grade and thickness requirements necessary for vacuum-rated pressure vessels. To ensure full compliance with ASME and research standards, the provider must supply Mill Test Reports along with the certified materials delivered to the fabricator. The opportunity was posted on September 15, 2026, with a response deadline of September 30, 2026. Classified under NAICS code 423440, the contract is managed by North Carolina State University. Interested parties can find further details through the North Carolina electronic vendor portal.

Other Commercial Equipment Merchant Wholesalers

POSTED

DEADLINE

Fabrication of 1,000-Gallon Stainless Steel Vacuum TanksThis subcontract involves the fabrication of two 1,000-gallon stainless steel vacuum tanks designed for a Mach-7 Reflected Shock Tunnel as part of research projects at North Carolina State University. The scope of work includes pressure vessel fabrication, assembly, and precision welding using high-vacuum compatible seals. The contractor must maintain ASME certification for pressure vessels and ensure full compliance with OSHA standards. The final deliverable consists of two completed and certified vacuum tanks, with a response deadline for the solicitation set for September 30, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

1,000-Gal Stainless Steel Vacuum Tanks

Solicitation # 63-ARM1202926

North Carolina State University is soliciting quotes for two 1,000-gallon stainless steel vacuum tanks to be used in a laboratory Mach-7 Reflected Shock Tunnel for research purposes. The tanks must be constructed from 304 or 316 stainless steel for outdoor use and be rated for pressure between -14psi and +15psi. Technical specifications require a bottom drain port of at least 6 inches, at least two 1-inch NPT ports, and specific Raised Face Slip On flanges for size 10 and size 4 pipes at designated heights and orientations. All pressure vessels must comply with ASME standards, and the supplier is required to obtain drawing approval from the Principal Investigator prior to fabrication. Bids must be submitted via the Bonfire Public Portal by September 30, 2026, and must include data sheets, brochures, or descriptive literature. Evaluation is based on the most advantageous bid, with a price-matching preference available for North Carolina resident bidders who are within 5 percent or 10,000 dollars of the lowest nonresident quote. Payment terms are Net 30 days following the receipt of a correct invoice or acceptance of goods. The university reserves the right to perform inspections at the bidder's site to ensure equipment conforms to specifications before the contract award or during the contract term.

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS