Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Food Safety and Quality Assurance Monitoring

Active

International

Response Deadline09/02/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Food Safety and Quality Assurance Monitoring seeks a subcontractor to provide third-party quality assurance and food safety oversight services to support federal compliance standards. The work involves conducting audits, maintaining detailed documentation, and ensuring adherence to applicable regulations governing food safety across designated locations in Quebec, excluding the National Capital Region. The services are critical to upholding the integrity of food systems under government supervision and require strict alignment with federal requirements throughout the contract period. The opportunity is posted under NAICS code 541620 and is open for submissions until September 2, 2026. The contract is issued by the Canada Border Services Agency on behalf of the Government of Canada, and while no set-aside designation is specified, the work is specifically scoped for performance in Quebec. Interested parties must respond by the deadline to be considered for this subcontract opportunity, with full details available through the official Canada Buys portal.

General Info

Subcontractor needed for food safety audits and federal compliance in Quebec, excluding National Capital Region, until September 2, 2026.

Agency

Government of Canada → Canada Border Services AgencyView Agency

NAICS

541620 - Environmental Consulting ServicesView NAICS

Place of Performance

Quebec (except NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineSep 2

Submission deadline

Response Deadline

09/02/2026, 07:00:00 PM UTCin 27 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Canada Border Services Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Canada Border Services Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide third-party quality assurance and food safety oversight, including audits and documentation to ensure compliance with federal standards and contract requirements.

Similar Contracts

Same NAICS industry code

Hazardous Materials & HAZCOM ComplianceThe contract requires strict adherence to OSHA HAZCOM standards and MIL-STD-129 for the proper labeling, handling, and packaging of all hazardous materials involved in manufacturing or packaging operations, ensuring that all documentation, signage, and safety procedures meet federal regulatory requirements. A critical prohibition is included against the use of hexavalent chromium in any form within the processes covered by this agreement, aligning with environmental and worker safety mandates. Performance is to occur at the designated location in Texarkana, Texas, with all activities governed by the specifications outlined in the referenced standards to maintain consistency and compliance across the supply chain. The subcontract is classified under NAICS code 541620 and is issued by the ASC Commodities Division of the Department of Defense, with a response deadline of August 13, 2026, and a posting date of August 5, 2026. All parties must ensure that packaging and labeling comply with MIL-STD-129 for uniformity and traceability, while HAZCOM obligations require accessible safety data sheets, employee training, and hazard communication protocols. Failure to comply with the hexavalent chromium prohibition or labeling standards may result in contract violation, necessitating rigorous internal controls and audits to demonstrate ongoing adherence throughout the contract period.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Environmental Compliance & Monitoring

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance & Safety LabelingThe contract governs the identification, handling, and labeling of hazardous materials within defense manufacturing and packaging operations, ensuring full adherence to OSHA's Hazard Communication Standard and Defense Logistics Agency requirements. Work must be performed in strict compliance with federal safety regulations to protect personnel, maintain operational integrity, and support defense supply chain readiness. The scope includes accurate material classification, proper signage, safety data sheet management, and labeling protocols aligned with updated regulatory frameworks. This is a subcontract categorized under a Women-Owned Small Business Set-Aside, with the NAICS code 541620 indicating environmental consulting and related services. The solicitation was posted on August 5, 2026, and responses are due by August 20, 2026. The work is performed under the purview of the Strategic Acquisition Program Directorate within the Department of Defense. All activities must align with federal defense contracting standards, and the successful bidder must demonstrate proven expertise in hazardous materials compliance within government-contracted manufacturing environments.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance & SDS Management

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 21 hours ago

DEADLINE

Sustainable Procurement AdvisoryThe contract mandates expert guidance and verification to ensure compliance with FAR 52.223-23 regarding the procurement of sustainable products, requiring all materials to align with EPA environmental standards for federal acquisitions. The work centers on assessing supply chains and product specifications to confirm adherence to federal sustainability mandates, with a focus on reducing environmental impact through approved materials and practices. Performance is tied to Robins AFB, Georgia, with the scope extending to oversight of subcontracted efforts within the Department of Defense procurement framework. This subcontract, classified under NAICS code 541620 for environmental consulting, is open for response until August 17, 2026, and was posted on August 5, 2026. It is not subject to any specific set-aside designation and operates under the Warner Robins office of the Department of Defense. Contractors must demonstrate proficiency in federal sustainability regulations and possess the capacity to audit and validate environmental compliance across product lines. The work is critical to supporting defense logistics through environmentally responsible sourcing, with all deliverables expected to meet stringent federal guidelines for green procurement.

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract titled Hazardous Materials Compliance and SDS Management requires the identification of hazardous components within materials and systems used in defense-related construction and equipment manufacturing, with full adherence to OSHA’s Hazard Communication Standard for the preparation of accurate Safety Data Sheets. It mandates strict compliance with both DFARS and FAR regulations governing hazardous materials, ensuring that all documentation, handling, storage, and disposal practices meet federal defense standards. The work is to be performed at a designated location in Barstow, California, with a response deadline of August 17, 2026, and is structured as a subcontract under NAICS code 541620, indicating specialized environmental and technical services for the Department of Defense. All activities must be completed with precision to support operational safety and regulatory accountability across the defense supply chain.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

Hazard Communication and Safety Data ComplianceThe contract requires the preparation and submission of hazard warning labels and Safety Data Sheets for gasket materials, ensuring full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and MIL-STD-129 labeling requirements. All documentation must be finalized and submitted prior to award, directly to the contracting officer, to meet regulatory and military specifications for chemical safety and product identification. The work pertains to gasket materials used in defense applications and demands precise adherence to federal safety and labeling protocols to ensure proper handling, storage, and use across military supply chains. This subcontract is issued under the NAICS code 541620, associated with scientific and technical consulting services, and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. Performance is centered at Fort Leonard Wood, Missouri, with a response deadline of August 17, 2026, and the posting date of August 5, 2026. The solicitation is accessible via the DIBBS platform, and successful bidders must demonstrate proven capability in hazard communication, SDS authoring, and military labeling compliance. No set-aside preferences are specified, making this opportunity open to all eligible subcontractors capable of meeting the stringent technical and regulatory standards outlined.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

Hazardous Material Compliance and Labeling

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Labeling & Safety Data Sheet (SDS) PreparationThe contract involves the development and government approval of hazard warning labels and safety data sheets (SDS) to ensure full compliance with OSHA’s Hazard Communication Standard for Department of Defense contracts. This subcontract is specifically designated for Women-Owned Small Businesses under the WOSB Set-Aside program and falls under the NAICS code 541620, which covers scientific and technical consulting services. The work is performance-based and requires precise adherence to federal safety regulations to accurately classify, label, and document hazardous materials used in military equipment and construction applications. All deliverables must be finalized and submitted by the response deadline of August 17, 2026, with the primary place of performance located in San Diego, California, at the zip code 92136-3581. The contract is issued under the Department of Defense’s Construction and Equipment Manufacturing and Construction division, indicating that the SDS and labeling services will support defense-related manufacturing and logistical operations. Participation is restricted to qualified WOSB entities, and the solicitation is accessible through the DIBBS platform, with no specific point of contact listed for inquiries.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 21 hours ago

DEADLINE

Hazardous Materials Handling and Compliance SupportThe contract mandates full compliance with federal and Defense Logistics Agency standards for the handling, storage, and documentation of hazardous materials, requiring strict adherence to safety protocols and regulatory frameworks. A core responsibility includes the accurate preparation and maintenance of Safety Data Sheets and proper identification of all hazardous substances to ensure operational safety and regulatory alignment. Work must be performed at the designated location in New Cumberland, Pennsylvania, with the NAICS code 541620 indicating specialized scientific and technical consulting services related to environmental and safety compliance. The solicitation is structured as a subcontract with a response deadline of August 17, 2026, and is issued under the Department of Defense through the Construction & Equipment T & IFO EQ office, targeting vendors capable of delivering expert support in hazardous materials management.

CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 21 hours ago

DEADLINE

Environmental Site Assessment and Remediation

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Radioactive Materials Notification (If Applicable)The contract requires the contractor to assess any fans or components supplied under this agreement for the presence of radioactive materials and to provide written notification to the Contracting Officer if any such materials exceed Department of Defense thresholds. This obligation applies to all deliverables under the subcontract and mandates proactive monitoring and reporting to ensure compliance with federal safety and regulatory standards. The requirement is mandatory and must be fulfilled regardless of whether radioactive materials are initially expected, as failure to detect or report exceeds could result in non-compliance and contractual penalties. The contract is a small business set-aside under the SBA program, reserved exclusively for total small businesses as defined by FAR 19.5, and falls under NAICS code 541620 for environmental consulting services. It was posted on August 5, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense through the Jacksonville Building office. Performance is required at a location in Jacksonville, Florida, with a zip code of 32212-0103. The contract is structured as a subcontract and is accessible via the DIBBS platform, though no point of contact information is provided in the posting.

JACKSONVILLE BLDG

POSTED

about 21 hours ago

DEADLINE

More opportunities from Government of Canada → Canada Border Services Agency

Same awarding agency

Sustainable Packaging SupplyThe contract seeks the supply of sustainable food packaging that is recyclable, reusable, or returnable, and must comply with CAN/CSA-ISO 14021 standards to ensure environmental claims are accurate and verifiable. The packaging must support a minimum 10-day shelf life for food products and include all required labeling to meet regulatory and consumer information standards. The scope is positioned as a subcontract under the Government of Canada’s procurement framework, with performance obligations focused on the province of Quebec, excluding the National Capital Region. The opportunity was posted on August 5, 2026, and responses are due by September 2, 2026, with the North American Industry Classification System code 326199 indicating it falls under other plastic product manufacturing. The contract supports federal sustainability goals through environmentally responsible packaging solutions, though no specific set-aside provisions or point of contact details are listed.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Cold Chain Delivery and Logistics ServicesThe contract involves the transport of cold meals from a preparation site to the CBSA Debarcadère facility in Saint-Bernard-de-Lacolle, Quebec, with a strict requirement to maintain the cold chain integrity throughout all delivery stages. Scheduled deliveries must align with precise timelines to ensure food safety and regulatory compliance, as the meals are intended for use by federal personnel at the border facility. The service is classified as a subcontract under NAICS code 484220, which pertains to specialized freight transportation, indicating the need for experienced logistics providers equipped with validated temperature-controlled vehicles and monitoring systems. The opportunity is posted by the Canada Border Services Agency under the Government of Canada, with a response deadline of September 2, 2026, and a posting date of August 5, 2026. Performance is exclusively located in Quebec, excluding the National Capital Region, and bidders must demonstrate capacity to operate reliably within this geographic scope. There is no set-aside designation specified, meaning the contract is open to all eligible subcontractors without preferential status for small or designated businesses. Providers must be prepared to meet rigorous service level expectations tied to food safety protocols, timeliness, and compliance with federal procurement standards.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Cold Meal Preparation and Packaging ServicesThe contract seeks qualified vendors to prepare and package ready-to-eat cold meals, including breakfast, lunch, dinner, and snacks, that comply with federal food safety standards and maintain a minimum 10-day shelf life under proper storage conditions. All meals must be produced under strict sanitation and quality control protocols to ensure consistency, safety, and compliance with applicable regulatory requirements. The work is to be performed primarily in Quebec, excluding the National Capital Region, with no specific address provided, indicating flexibility within the broader geographic area. This is a subcontract opportunity issued by the Canada Border Services Agency under the Government of Canada, with a North American Industry Classification System code of 311919 for other food manufacturing. The solicitation was posted on August 5, 2026, and responses are due by September 2, 2026, at 7:00 PM Eastern Time. Interested parties must ensure full alignment with food safety mandates and the 10-day shelf life requirement, as failure to meet these criteria will result in rejection. The contract does not specify any set-aside provisions, and there is no designated point of contact listed in the provided details.

Other Snack Food Manufacturing

POSTED

DEADLINE

Cold meal catering and delivery services

Solicitation # 1000557354

The Canada Border Services Agency is soliciting bids for cold meal catering and delivery services at the Saint-Bernard-de-Lacolle Border Crossing, with the solicitation posted on August 5, 2026, and a response deadline of September 2, 2026. The contract is open to federal suppliers and requires the provision of prepared cold meals delivered consistently to support personnel operating at this specific border location in Quebec, excluding the National Capital Region. The service must meet the operational needs of the site, ensuring meals are delivered in a timely, safe, and reliable manner, though exact volume, frequency, or menu specifications are not detailed in the posted data. Ariana Caparelli, the Contracting Authority, serves as the primary point of contact for inquiries and can be reached via email at ariana.caparelli@cbsa-asfc.gc.ca. The contract falls under the Government of Canada’s procurement framework, and interested vendors must submit proposals through the Canada Buys portal before the stated deadline. All performance obligations are tied to the designated location, and while the solicitation does not specify set-asides or NAICS codes, bidders are expected to align their offerings with federal service standards and operational requirements for border infrastructure.

POSTED

DEADLINE

Eco-Friendly Detergent and Cleaning Supply ProvisionThe contract is for the supply of hypoallergenic, fragrance-free, and environmentally compliant detergents and cleaning agents specifically designated for institutional laundry use across Canada, with performance focused in Quebec outside the National Capital Region, including Laval. It is issued under the North American Industry Classification System code 325613, indicating a focus on soap and cleaning compound manufacturing, and is structured as a subcontract under the Government of Canada through the Canada Border Services Agency. All products must meet stringent health and environmental standards, ensuring safety for sensitive skin and compliance with ecological regulations, making them suitable for use in hospitals, correctional facilities, and other public service laundries. The opportunity was posted on July 27, 2026, with a firm deadline for responses on August 20, 2026, at 7:00 PM Eastern Time, and is accessible via the Canada Buys portal.

Surface Active Agent Manufacturing

POSTED

DEADLINE

Commercial Laundry Equipment Maintenance and RepairThe contract covers preventive maintenance, servicing, and emergency repair services for industrial washing, drying, and folding equipment utilized in a commercial laundry operation under the Canada Border Services Agency. Services are required to ensure continuous and efficient operation of the equipment, with an emphasis on minimizing downtime and maintaining performance standards across all systems. The scope includes routine inspections, scheduled servicing, rapid-response emergency repairs, and any necessary parts replacement to keep the laundry infrastructure functioning at optimal levels. Work under this subcontract must be performed at the designated location in Laval, Quebec, excluding the National Capital Region, with all activities aligned to the operational needs of the government facility. The solicitation is open under NAICS code 811310, targeting service providers with expertise in industrial laundry equipment maintenance. Proposals must be submitted by August 20, 2026, and the contract is expected to support the agency’s daily laundry operations through reliable and timely service interventions.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Laundry Collection and Delivery LogisticsThe contract covers the specialized transportation of soiled linens from the Laval IHC facility to a designated processing center, along with the return of sanitized linens, using fully enclosed, hygienic vehicles designed to prevent contamination and maintain strict sanitation standards throughout transit. This service ensures the secure, timely, and compliant movement of linens critical to healthcare operations, with all transport protocols adhering to health and safety regulations for medical textiles. The task is structured as a subcontract under the Government of Canada, managed by the Canada Border Services Agency, and is classified under NAICS code 484121 for specialized freight transportation. Performance is required exclusively within Laval, Quebec, excluding the National Capital Region, with bids due by August 20, 2026. The solicitation does not specify a set-aside designation, and all proposals must demonstrate capacity for consistent, reliable service with stringent hygiene controls to meet institutional requirements.

General Freight Trucking, Long-Distance, Truckload

POSTED

DEADLINE

Commercial Laundry Processing ServicesThe contract involves the provision of full-cycle commercial laundry services for the Laval Immigration Holding Centre, covering the collection, washing, drying, folding, and return delivery of linens and uniforms used by detainees and staff. The services must be performed reliably and in compliance with health and safety standards to ensure continuous operational support at the facility, with all activities centered in Laval, Quebec. The work is classified under NAICS code 812331 and is structured as a subcontract, indicating it is part of a broader procurement effort by the Government of Canada through the Canada Border Services Agency. The solicitation was posted on July 27, 2026, with a response deadline of August 20, 2026, at 7:00 PM Eastern Time. There is no set-aside designation specified, and the place of performance is limited to the Laval area excluding the National Capital Region. All service delivery must align with the operational needs of the holding centre, emphasizing timeliness, hygiene, and security in handling sensitive materials. Participation is open to qualified vendors who can meet the stringent requirements of a federal correctional and immigration facility environment.

POSTED

DEADLINE

Laundry Services

Solicitation # PR265548

Canada is seeking competitive offers to provide comprehensive commercial laundry services at the Immigration Holding Centre in Laval, Quebec, under solicitation PR265548. The contract requires the contractor to collect, wash, dry, fold, and deliver all institutional linens—including bed sheets, blankets, pillowcases, towels, and face cloths—on a 24/7 basis to ensure continuous hygiene and humane conditions for detainees. Services must comply with CBSA’s National Detention Standards and specific technical requirements, including the use of hypoallergenic, fragrance-free detergents compliant with Health Canada and WHMIS regulations, thermal disinfection at temperatures between 71°C and 80°C, and strict separation of soiled and clean linen processing areas. All linen must be fully dried before packaging and clearly labeled with the client site name, delivery date, and total weight, with damaged items marked as “DAMAGED LINEN.” The work will be performed at the contractor’s facility, with final acceptance occurring at the Laval IHC site by the Government of Canada. The contract has a base performance period ending August 31, 2027, with an option to extend for up to four additional one-year periods, each requiring written notice at least 30 days prior to expiration. The estimated annual volume is 15,600 kilograms of laundry, though payment will be based on actual kilos accepted, not guaranteed quantities. Pricing details are not specified in the solicitation and will be determined upon award through a lowest price technically acceptable (LPTA) process, where compliance with mandatory technical criteria is a pass/fail threshold and award is awarded solely based on the lowest evaluated price among compliant offers. Contractors must maintain all required certifications throughout the contract term, comply with anti-forced labor and international sanctions requirements, and adhere to ethical standards prohibiting conflicts of interest, bribes, or contingency fees. Subcontracting requires prior written approval, and all subcontractors must be bound by the same contractual obligations. The contractor is responsible for securing insurance, retaining financial and operational records for seven years after final payment, and making them available for audit upon request. Invoices must be submitted electronically to vendors-fournisseurs@cbsa-asfc.gc.ca with proper financial codes, and direct deposit is strongly encouraged. Proposals must be submitted electronically by August 20, 2026, at 2:00 p.m. EDT through the Bid Reception Unit, accompanied by the required declaration and

POSTED

DEADLINE