Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Gearshaft Supply (NSN 5930-00-168-1336 / Part No: 11007849-000)

Active

International

Response Deadline09/09/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of a single gearshaft unit designated by NSN 5930-00-168-1336 and part number 11007849-000, intended for integration into armament loader systems used by Canadian Forces. The gearshaft must be properly preserved and marked according to military specifications to ensure operational readiness and traceability throughout its lifecycle. Delivery is required directly to designated Canadian Forces Support Detachments located in Alberta and Quebec, excluding the National Capital Region. The item is classified under NAICS code 332996, indicating it pertains to other fabricated metal product manufacturing. This is a subcontract opportunity issued by the Department of National Defence on behalf of the Government of Canada, with bids due by September 9, 2026, and the opportunity posted on July 27, 2026. All compliance, packaging, documentation, and logistical requirements must meet Canadian defence standards for military hardware integration and distribution.

General Info

Supply single gearshaft for Canadian Forces armament systems, deliver to Alberta and Quebec, meet military standards by September 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

332996 - Fabricated Pipe and Pipe Fitting ManufacturingView NAICS

Place of Performance

Alberta, Quebec (except NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineSep 9

Submission deadline

Response Deadline

09/09/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of one gearshaft unit for integration into armament loader systems, including preservation, marking, and delivery to designated Canadian Forces Support Detachments.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M0-26-Q-1126

The contract covers the procurement of 40 units of PLUG, PIPE with NSN 4730-01-171-4715 under solicitation SPE7M0-26-Q-1126, issued by the Department of Defense through the Maritime Supply Chain ESOC Buys office. The item is classified as a critical application product requiring strict compliance with technical and quality specifications referenced in the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation issue date. Full and open competition applies, and the contract mandates a firm fixed price with zero variance allowed in quantity. Delivery is required within 30 days after award, with inspection and acceptance occurring at origin. The item must be packaged in full compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and markings as per MIL-STD-129, with no special marking codes required. Palletization must adhere to DLA Packaging Requirements RP001, and the final destination is the 2nd Supply Depot FMS Import Manager in Busan, Korea. Ozone-depleting chemicals are strictly prohibited, and any substitution must be pre-approved unless explicitly allowed by the specification. The unit of issue is each, and pricing is to be submitted accordingly with no adjustments permitted after award.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7LX-26-U-9077

The contract pertains to the procurement of a nipple, pipe, specifically a boss type designated for use in E/I Light Armored Vehicles, identified by part number 10505358 and NSN 4730-01-157-8993, with a quantity of 89 units. The item is classified as a critical application component under the direct control of the Defense Logistics Agency and is subject to strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. The item must be packaged in accordance with MIL-STD-129 and RP001 DLA Packaging Requirements, ensuring proper labeling, unit packing, and palletization, while explicitly prohibiting the use of Class I ozone depleting chemicals in any part of the product or its manufacturing process. Any substitute chemicals require prior approval unless explicitly authorized by the technical specifications. Delivery is required FOB origin within 74 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination point. The contract, identified by solicitation number SPE7LX-26-U-9077, is issued under a federal acquisition framework, with a unit of issue as a single unit, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Contact for inquiries is Theodore Misiolek, with the response deadline set for August 13, 2026.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

NUT, TUBE COUPLING

Solicitation # SPE7M3-26-T-7740

The contract is for the procurement of two steel tube coupling nuts, cadmium plated, with a nominal tube outer diameter of 1/4 inch, manufactured to meet MIL-DTL-18866K and referenced under part number MS39210-3. The items are classified as a critical application product and must comply with stringent military standards including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and DLA packaging requirements. Sampling and inspection follow zero-defect acceptance criteria per MIL-STD-1916 or comparable zero-based plans, with unspecified attributes treated as major and verified at AQL 1.0. The items are prohibited from containing mercury or ozone-depleting chemicals unless explicitly exempted, and any substitute materials require prior approval. Delivery is FOB origin within 20 days to a military facility in Taiwan, with no variance allowed in quantity. The contract enforces full and open competition and references the DLA Master List of Technical and Quality Requirements for all technical and quality stipulations. The NSN is 4730-00-052-9876, the purchase request number is 7017671486, and the delivery deadline is August 3, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE3SE-26-Q-0414

The contract pertains to the procurement of a 20-foot fuel line compatible with Parker BH2-61Y and BY2-60Y fittings, intended for use with the Modern Burner Unit identified by NSNs 7310-01-452-8137 and 7310-01-507-9310. The fuel line must comply with MIL-PRF-44485 and adhere to all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Acceptable sources are limited to TELEFLEX (CANADA) LTD with CAGE 3ADO6 and P/N MS0350, and AIRBOURNE VETERANS SERVICES with CAGE 5DNX9 and P/N FHOS10010. The contract specifies a firm fixed price for 146 units, with no tolerance for quantity variance, and delivery is required within 30 days after award. Inspection and acceptance occur at the destination, and all items must be packaged in accordance with ASTM D3951 while also meeting the stricter requirements of MIL-STD-129 for labeling and marking, and palletization must follow DLA’s RP001 packaging guidelines. The item is identified by NSN 7310-01-455-3735, with a purchase request number of 7017672456 and a mandatory delivery deadline of January 22, 2027. The contract is issued under solicitation SPE3SE-26-Q-0414, with a response deadline of August 4, 2026, and the point of contact is Nicholas D’Aulerio of the Department of Defense. Packaging and shipping must conform to DLA procedures, including use of the designated freight and parcel post address at DLA Distribution Red River in Texarkana, Texas. Covered defense information may apply, and any government identification must be removed from non-accepted supplies. The unit of issue is each, and pricing is fixed with no adjustment permitted. All contractual obligations are subject to DLA’s procurement regulations, including transportation procedures outlined in DLAD Proc Notes C19 and C20.

SUBSISTENCE FSE SUPPLY CHAIN

POSTED

DEADLINE

Solicitation # SPE7M0-26-Q-1129

This contract specifies the procurement of one elbow tube item identified by NSN 4730-01-697-7383 under solicitation SPE7M0-26-Q-1129, with a firm fixed price and zero variance in quantity allowed. Delivery is required within 30 days after award, with FOB origin terms and inspection and acceptance occurring at the destination. The product must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which take precedence over other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA packaging requirements, with palletization following specified protocols. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be pre-approved unless explicitly permitted by the specification. The item is associated with multiple approved part numbers from certified suppliers including DESIGNED METAL CONNECTIONS INC, EATON AEROQUIP LLC, and NORTHROP GRUMMAN SYSTEMS CORP. The delivery address is designated for HMX-1 Supply at Marine Corps Air Facility Quantico, Virginia, with shipment required via the fastest traceable means and explicitly excluding parcel post. Transportation and freight shipping instructions reference specific DLA procedural notes C19 and C20, and the item is tagged with RDD 999/NMCS and a TCN identifier for tracking. The contract includes a government-only field listing the material need date as July 22, 2026, with the solicitation posted on July 29, 2026 and responses due by August 31, 2026. The unit of issue is one each (EA), and all markings, packaging, and documentation must align with the DLA’s standardized unit of issue and purchase unit specifications as defined in their official database. This is a federal procurement under the Department of Defense, managed by the Maritime Supply Chain ESOC Buys organization.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7M0-26-Q-1131

The contract pertains to the procurement of one elbow tube item identified by NSN 4730-01-697-7383 under solicitation SPE7M0-26-Q-1131, with a firm fixed price and zero variance in quantity. Delivery is required within 30 days after award, with the point of delivery being the origin and acceptance occurring at destination. The item must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which override any conflicting specifications, including ASTM D3951. Packaging must adhere to MIL-STD-129 and DLA Packaging Requirements, with palletization following RP001 guidelines. Use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The item is supplied by approved vendors including Northrop Grumman Systems Corp, Designed Metal Connections Inc, and Eaton Aeroquip LLC with specified part numbers. Shipment must be made by the fastest traceable means, excluding parcel post, and is directed to HMX-1 Supply at Quantico, Virginia. The government’s projected ship date is July 22, 2026, and the item is tied to a specific purchase request and project identification for tracking.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

in about 1 month

Solicitation # SPE4A7-26-Q-0919

The contract specifies the procurement of a stuffing tube identified by NSN 5975-01-722-0867 and part number 630A007MT203D, with a firm fixed price and no variance allowed in quantity—exactly one unit is required. Delivery is due 155 days after the award date, with FOB origin terms and inspection and acceptance occurring at the destination. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specific provisions including packaging per RP001, removal of government identification from non-accepted items per RQ011, and bare item marking per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes must be verified using specified levels or AQLs. Packaging must comply with MIL-STD-129 labeling and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 if hazardous under FED-STD-313, with DLA requirements taking precedence. Palletization must adhere to RP001 and commercial packaging standards. The item must be shipped via the fastest traceable means, explicitly prohibiting parcel post, to the designated government freight address in Port Hueneme, California, with shipment details including RDD 777 and TCN N4242052261530. The government use section includes internal tracking codes, and the required delivery date is May 22, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Solicitation # SPE4A7-26-Q-0932

The contract specifies the procurement of 10 stuffing tubes with NSN 5975-99-676-3468 under a firm fixed price arrangement with zero variance allowed in quantity. Delivery is required 145 days after award date, with inspection and acceptance occurring at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E using preservation method 10, dry preservation, and unit container D3, and marked according to MIL-STD-129 without special marking codes. Packaging and preservation are subject to DLA’s RP001 requirements and explicitly prohibit mercury or mercury compounds. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise stated, and attributes are to be classified with verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract references technical and quality requirements identified by R and I numbers from the DLA Master List, and all packaging, marking, and preservation instructions must align with these standards. Transportation directions specify delivery to USNS EARL WARREN via parcel post and freight shipping addresses, with shipping details governed by DLAD PROC NOTES C19 and C20. The vendor must use VSM for U.S. shipments and comply with the provided TCN, RDD, project, and signature codes. The government’s material need date is July 17, 2026, and the contract solicitation number is SPE4A7-26-Q-0932.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

COUPLING ASSEMBLY, QUICK DISCONNECT

Solicitation # SPE7MX-26-R-X049

The solicitation SPE7MX-26-R-X049 seeks a Firm-Fixed-Price contract for the procurement of Coupling Assemblies, Quick Disconnect, identified by NSN 4730-01-296-5759, under commercial item procedures. The contract is managed by DLA Land and Maritime, Land Supplier Operations SMSG, with a response deadline of August 28, 2026, and is issued through the DIBBS portal. Delivery is required FOB Origin, with inspection and acceptance occurring at Destination, and the ordering period extends one year from contract award, with potential deliveries extending up to one year beyond expiration under certain conditions. The contract allows for multiple quantity ranges from 39 to 930 units, with potential two-year option periods, and carries an estimated total value between $4,680.82 and $2,295,018.36. All packaging and marking must strictly adhere to the attached PID, Packaging, and Marking document, incorporating DLA’s RP001 standards, MIL-STD-129 for labeling including mandatory phrases such as “Product Verification Test Samples – Do Not Post to Stock,” and compliance with specified barcode formats. Preservation methods are governed by RP001 but not detailed in the solicitation. Evaluation will be conducted on a best-value trade-off basis, where price, past performance, proposed delivery, and small business participation are assessed as equal in importance. Price is weighted heavily based on unit pricing across four quantity tiers, with unrealistic pricing leading to rejection. Past performance is evaluated through SPRS records for quality and delivery history, while delivery timelines are scored favorably based on speed. Small business participation must meet FAR and DFARS requirements for subcontracting commitments to SDB, WOSB, SDVOSB, HUBZone, and other designated categories, with adjectival ratings applied. Offerors must declare their socioeconomic status through SAM.gov and comply with representations under FAR 52.219-28. Compliance with CMMC Level 1–3 is mandatory depending on data handling, requiring annual affirmations in SPRS and flowdown to subcontractors. Invoicing is exclusively through WAWF using electronic methods, and payment is processed via PO Box 3990 in Columbus, OH. The contract imposes strict adherence to DFARS and FAR clauses including 52.217-9 for option extensions,

LAND SUPPLIER OPERATIONS SMSG

POSTED

DEADLINE

TUBE ASSEMBLY, METAL

Solicitation # SPE7M4-26-T-290U

The contract is for one unit of a metal tube assembly used as a fuel injector, identified by NSN 4710-00-227-8310 and part number 35356724 from Perkins Engines Co Ltd. The delivery is required within 20 days from the contract award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must fully comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, cushioning, and container use. Marking must conform to MIL-STD-129 with no special markings required. The item is destined for W81B9W at Schofield Barracks, Hawaii, with transport governed by DLAD procedures C19 and C20. All technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the revision effective on the solicitation issue date controlling compliance. The solicitation number is SPE7M4-26-T-290U, issued by the Fluid Handling Division of the Department of Defense, with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The assigned NAICS code is 332996, and the required delivery date is July 27, 2026. The primary point of contact is Rory O'Reilly, reachable via phone and email provided, and the contract is administered under the DIBBS platform. Government use fields indicate internal tracking identifiers, and the unit of issue is a single unit (EA). The contract is part of Project TP3, with the supplier address linked to the designated military receiving point and no set-aside status applied.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Stainless Steel Hardware SupplyThe contract mandates the supply of marine-grade stainless steel fasteners, brackets, and connectors specifically engineered for the structural assembly of a floating pier, with strict emphasis on corrosion resistance and long-term durability under harsh maritime conditions. All components must meet industrial standards suitable for prolonged exposure to saltwater and environmental stress, ensuring structural integrity and minimal maintenance over the asset’s operational life. The materials are critical to the safe and reliable functioning of the pier, requiring precise engineering compliance and high-quality manufacturing processes. The contract is classified as a subcontract under NAICS code 332996, posted on July 29, 2026, with a response deadline of August 17, 2026. Performance is required at Gaeta, where the floating pier infrastructure is being developed or maintained. The overseeing entity is the Navsup Flc Sigonella Naples Office, operating under the Department of Defense, indicating this is a defense-related procurement tied to naval operations or facility support. No set-aside provisions are specified, and the contract does not include point of contact details or a physical office address, suggesting procurement is handled through centralized defense logistics channels under the SAM.GOV system.

Navsup Flc Sigonella Naples Office

POSTED

DEADLINE

Ultra-High Vacuum (UHV) Sealing & Materials SupplyThe contract calls for the supply of vacuum-compatible metal seals, gaskets, and non-outgassing materials specifically engineered for operation in ultra-high vacuum environments at or below 10⁻⁷ Torr. These components must meet stringent performance criteria to ensure structural integrity, thermal stability, and minimal contamination under extreme vacuum conditions, making them essential for critical aerospace and scientific instrumentation systems. The materials must be free of volatile compounds that could compromise vacuum integrity or interfere with sensitive experiments, and all items are subject to rigorous quality assurance standards consistent with NASA's mission-critical requirements. The solicitation is issued as a subcontract under the NAICS code 332996 for Other Fabricated Metal Product Manufacturing by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. Responses are due by August 3, 2026, and the opportunity was posted on July 29, 2026. The place of performance and point of contact details are not specified, but the delivery and compliance must align with NASA’s operational needs across its mission facilities. All vendors are expected to demonstrate proven experience in supplying UHV-grade components and adherence to cleanroom and contamination control protocols.

NASA Shared Services Center

POSTED

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Catering Services for BNQ in Halifax NS

Solicitation # W3371-26-T007

The Government of Canada, through the Department of National Defence, is soliciting offers for catering services at HMCS Scotian in Halifax, Nova Scotia, to support the Royal Canadian Navy. The opportunity, identified by solicitation number W3371-26-T007, was posted on July 29, 2026, with a response deadline of August 10, 2026. Offerors are expected to deliver comprehensive meal services tailored to the operational needs of naval personnel stationed at the facility, ensuring food quality, safety, and timely service in alignment with military standards. The contract is open to eligible contractors without specific set-aside provisions, and all proposals must meet the requirements outlined in the solicitation. Timothy Pelletier serves as the primary point of contact for this solicitation, reachable via email at timothy.pelletier@forces.gc.ca or by phone at 902-427-4428. Offers must be submitted electronically through the Canada Buys portal, where full details of the tender are available. Performance of the services will be conducted exclusively at HMCS Scotian in Halifax, and successful bidders will be required to comply with all federal procurement regulations, operational protocols, and health and safety standards applicable to government installations. The contract aims to secure a reliable, high-quality catering provider capable of sustaining operations in a secure, mission-critical environment.

POSTED

DEADLINE

Catering Services for BNQ in Quebec, QC

Solicitation # W3371-26-T008

The Government of Canada, through the Department of National Defence, is soliciting offers for catering services at HMCS Montcalm in Québec, Québec, to support the Royal Canadian Navy. The solicitation, identified as W3371-26-T008, was posted on July 29, 2026, with a response deadline of August 10, 2026, at 8:00 PM Eastern Time. Offerors are expected to deliver comprehensive food services tailored to the operational needs of naval personnel stationed at the facility, ensuring meals meet nutritional, safety, and logistical standards required in a military environment. The contract is open to eligible parties under federal procurement guidelines, with no specified set-aside for small or diverse businesses. Timothy Pelletier serves as the primary point of contact for this solicitation, providing assistance and clarification to interested parties via email at timothy.pelletier@forces.gc.ca or by phone at 902-427-4428. All services must be performed at HMCS Montcalm in Québec, and offers must fully address the scope, staffing, menu planning, supply chain management, and compliance with federal health and safety regulations. Proposals submitted after the deadline will not be considered, and bidders are encouraged to review the official tender page on CanadaBuys for additional procedural details and requirements.

POSTED

DEADLINE

SAR Vacuum Spine Boards

Solicitation # W3999-270001

The Department of National Defence is seeking to procure twenty-seven lightweight vacuum spine boards under solicitation W3999-270001, with all deliverables required to be received by 5 October 2026 and the contract period running until 5 December 2026. The spine boards must be approximately six feet in length,具备 a chambered vacuum bead system for enhanced immobilization during airlift, vertical rescue, and austere SAR operations, and must be radiolucent, MRI-compatible, latex-free, and resistant to puncture, abrasion, moisture, and bodily fluids. Each unit must include a manual vacuum pump with no external power requirement, a complete restraint strap system, integrated carry handles for multiple lifting configurations, and be compactly foldable or rollable for aircraft storage. The product must be compatible with existing rigid spine boards and the Ferno Cot transport system. All items must be new, conform to the latest specifications, and be delivered Delivered Duty Paid to CFB Winnipeg 17 Wing, 715 Wihuri Road, Winnipeg, Manitoba, under Incoterms 2020, with all customs duties, GST/HST, and excise taxes included in the quoted price. Payment will be made at a fixed price upon delivery, with undisputed invoices settled within 30 days of receipt, subject to a mandatory 15 percent tax withholding by the Canada Revenue Agency. Award will be made to the lowest priced compliant offer, with all submissions evaluated against mandatory technical criteria; failure to meet any of these criteria results in non-responsiveness. Proposals must be submitted electronically in three sections—Technical Offer, Financial Offer, and Offer Submission Forms—with supporting documentation in either English or French, and must remain valid for 60 days beyond the closing date of 25 August 2026. Offers may not exceed five megabytes unless submitted across multiple emails, and must avoid embedded scripts or macros. The Contractor must certify compliance with Canada’s Code of Conduct for Procurement, lack of conflict of interest, and that goods are not produced using forced labor. The Contractor is also required to maintain valid AIEE status, use environmentally preferable packaging where feasible, and ensure all packaging materials are reusable, returnable, or recyclable, excluding packaging tape. The contract is governed by the laws of Manitoba, requires written amendments, prohibits assignment without Canada’s consent, and includes a 12-month warranty. The Contracting Authority is Adam Bidzinski

Surgical Appliance and Supplies Manufacturing

POSTED

DEADLINE

Digital Feasibility Study of a solid-state hydrogen-powered Light Armoured Vehicle (LAV)

Solicitation # W8486-270848/A

The Department of National Defence is seeking a single contractor to conduct a digital feasibility study for a solid-state hydrogen-powered Light Armoured Vehicle with a maximum weight of 45,000 lbs, under contract number W8486-270848/A. The study must focus exclusively on the powertrain configuration, including SWaP analysis and platform configurations for 4x4, 6x6, 8x8, and tracked designs, with deliverables including 3-D CAD models, a project schedule, mission profile, draft and final reports, and a project presentation. The work must be completed by March 20, 2028, under a two-year initial contract term with a ceiling value of $1,200,000, split between $500,000 for fiscal year 2026/27 and $700,000 for 2027/28. Payment is cost-reimbursable based on milestone achievements, with invoices required upon completion of each deliverable and payment issued within 30 days of receipt of a compliant invoice. Bidders must have a valid Business Number, submit offerings in three distinct sections—technical, financial, and declaration forms—and adhere to strict evaluation criteria that prioritize project management certification (15 points), proven experience in three or more relevant projects (30 points), and prior work on military vehicle platforms. The proposal must include an Offeror Declaration Form and satisfy mandatory requirements identified with "must" or "mandatory," with failure to meet any disqualifying the bid. All submissions must be sent exclusively through the SAP Business Network, and inquiries must be directed to Mariam Isak at mariam.isak@forces.gc.ca. The contract prohibits contingency fees, requires compliance with applicable laws and the Procurement Code of Conduct, and mandates detailed recordkeeping of all costs and correspondence. While no security clearances are required, the contractor must maintain records in machine-readable formats and comply with Treasury Board policies regarding contracts with former public servants. The work will be performed in the National Capital Region, and materials may be submitted in either English or French.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

TBIPS - Implementation and Deployment of Cloud Analytics Solutions

Solicitation # W6369-24-P5PN

The Directorate Joint Defence Cloud Program (DJDCP) seeks informatics professionals to support the implementation and deployment of cloud analytics solutions for the Department of National Defence and Canadian Armed Forces, advancing the transition from traditional on-premises IT to secure, modern cloud-based services. The contract, solicited under W6369-24-P5PN and titled “TBIPS - Implementation and Deployment of Cloud Analytics Solutions,” focuses on hands-on technical support for cloud environment setup, platform management, operational troubleshooting, and the delivery of business solutions aligned with DND/CAF modernization goals. Performance is centered in the National Capital Region, primarily Ottawa, with work conducted at government or contractor sites as directed, and all activities must comply with stringent Canadian security protocols including PROTECTED, CONFIDENTIAL, SECRET, and TOP SECRET classification requirements. Contractors must hold a SECRET-level facility security clearance, and all personnel accessing classified information must possess at least RELIABILITY STATUS or SECRET clearance depending on role, with no use of personal devices permitted and no processing or storage of classified material allowed without prior written authorization from the Contract Security Program. Evaluation is based on a merit-based trade-off methodology, with technical merit weighted at 90% and price at 10%, requiring a minimum pass mark of 120 out of 150 points across seven key criteria including previous contract value, experience with cloud adoption and modernization, cloud service provider partnerships, and enterprise cloud analytics expertise. Proposals must be submitted in three bound volumes—Technical, Financial, and Certifications—with electronic formats limited to .pdf, .doc, and .xls files, and hard copies required to use recycled paper and environmentally sustainable practices. Contractors must certify compliance with the Federal Contractors Program for Employment Equity, provide detailed information on proposed personnel including language proficiency, availability, and potential conflicts from multi-contract engagements, and submit a Certificate of Independent Bid Determination. Payment terms extend to 180 days, with disbursement via direct deposit, wire transfer, EDI, or LVTS, and quarterly financial reporting is mandatory. The contract has a fixed two-year term with no option periods, and replacement of key personnel requires a formal remediation plan within 10 working days. All deliverables, including monthly progress reports and technical documentation, must be submitted in editable Microsoft Office formats and are subject to government inspection and acceptance at DND facilities or contractor locations.

Computer Facilities Management Services

POSTED

DEADLINE

E60HN-16ELEC – Stream 2 - Oscilloscope and multimeters (Atlantic)

Solicitation # W7702-2026-00644-A

This contract, E60HN-16ELEC – Stream 2 – Oscilloscopes and Multimeters (Atlantic), is issued by the Department of National Defence under the Government of Canada to procure electronic test equipment exclusively for use in the Atlantic region, specifically targeting procurement activities centered in Halifax, Nova Scotia. Only suppliers who have successfully qualified under Stream 2 of the Electronic Products Supply Arrangement are eligible to participate, with a pre-approved list of 25 vendors including Anixter Canada Inc., Graybar Canada, Nedco-Rexel, TestEquity, RS Americas (Canada), and others, all of whom are authorized to provide oscilloscopes, multimeters, and related electronic measurement devices. The Crown maintains the flexibility to negotiate directly with any of these qualified suppliers to meet immediate or specific operational requirements without requiring full competitive bidding for each individual purchase. The solicitation is formally identified by number W7702-2026-00644-A, was posted on July 29, 2026, and bids must be submitted by August 13, 2026. The procurement falls under a federal government framework with no set-aside classification, emphasizing efficiency and pre-vetted supplier access rather than open competition. Courtney Smart, Contracting Authority, serves as the primary point of contact for all inquiries and submissions. The contract structure ensures rapid access to high-quality, calibrated electronic test equipment critical to defence operations, while maintaining accountability through a restricted supplier pool already vetted for technical capability and service standards.

Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

DEADLINE

NPP-Catering Services for BNQ in Quebec, QC

Solicitation # W3371-26-T008_NPP

The Government of Canada, through the Department of National Defence, is soliciting offers for catering services to be provided at HMCS Montcalm in Québec, QC, to support the Royal Canadian Navy. The solicitation, identified as W3371-26-T008_NPP, was posted on July 29, 2026, with a deadline for responses set for August 10, 2026. Offerors must be prepared to deliver comprehensive food services tailored to the operational and logistical needs of military personnel stationed at the facility. The contract is a federal procurement initiative with no specific set-aside designation, open to all eligible vendors who can meet the required standards for quality, safety, and consistency in meal service. Timothy Pelletier serves as the primary point of contact for this solicitation, reachable via email at timothy.pelletier@forces.gc.ca or by phone at 902-427-4428, and holds the role of Contracting Authority. All performance of the services must take place at the designated location in Québec City, Québec, with no alternative venues permitted. Potential bidders are directed to the official Canada Buys portal for full details and documentation related to the tender. The contract represents a key support function for naval operations, requiring reliable, high-volume catering capabilities that align with government regulations and military standards.

POSTED

DEADLINE

RCAF SARTech GPS Watches

Solicitation # W8485-279541/A

The Department of National Defence is soliciting bids for the procurement of 240 commercial off-the-shelf ruggedized wearable GPS tracking devices and 240 corresponding tactical replacement straps for use by Royal Canadian Air Force Search and Rescue Technicians in extreme operational environments. The devices must meet stringent technical criteria including a minimum of 100 hours of continuous battery life or 260 hours in solar-assisted mode, dual-frequency GNSS with automated satellite selection, preloaded full-color topographical mapping with offline dynamic routing, a fiber-reinforced polymer chassis with titanium bezel or backplate, a sapphire lens, and an integrated variable-intensity LED flashlight offering both white and tactical lighting. The replacement straps must be 26 mm wide, constructed of chemical-resistant silicone elastomer resistant to aviation fluids, equipped with a tool-free quick-release mechanism, and feature stainless steel, titanium, or DLC-coated titanium hardware with a solid matte non-reflective finish in approved uniform colors. All items must be new production from the original manufacturer or an accredited agent, conforming to current specifications, with full traceability and manufacturer records retained for proof of origin. Each unit must be individually packaged according to Canadian Forces Packaging Specification D-LM-008-036/SF-000, accompanied by a Certificate of Compliance for airworthiness, and marked in accordance with DND standards including D2000C, D2001C, D2025C, and D6010C. Delivery is to be made FCA at the contractor’s location to 25 Canadian Forces Supply Depot in Montreal, Quebec, with all shipments subject to Incoterms 2000 and delivered duty paid including customs duties, GST/HST, and excise taxes incorporated into the quoted price. Bids must be submitted in three separately bound sections—Technical, Financial, and Certifications—with pricing appearing only in the financial section. Proposals must be received by the PWGSC Bid Receiving Unit no later than August 11, 2026, via approved channels including epost Connect, and cannot be emailed directly to contact addresses. Bidders are required to submit the Integrity Declaration Form and documentation under the Ineligibility and Suspension Policy, and must certify they are not on the Federal Contractors Program’s “FCP Limited Eligibility to Bid” list. Compliance with all mandatory technical criteria for both the devices (MTC 1-5) and straps (ST

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

CIRCUIT BREAKERS

Solicitation # W8482-264981/A

The Department of National Defence is soliciting bids for 80 circuit breakers, with 40 units required for delivery to CFB Halifax and 40 units to CFB Esquimalt, under solicitation number W8482-264981/A. Each unit must be the Siemens Energy Global GmbH & Co. KG part number 3RV2041-MA10, identified by NCAGE D1149 and GSIN 5925, with bids for equivalent or substitute products permitted provided full technical details and manufacturer information are submitted. The contract follows a Lowest Price Technically Acceptable (LPTA) methodology, where compliance with mandatory technical, packaging, marking, and preservation standards is a pass/fail requirement, and award will go to the lowest-priced compliant offer. All products must adhere to Canadian Forces packaging standards D-LM-008-001/SF-001 and marking standards D-LM-008-002/SF-001, while international contractors must meet NATO TL8100-0100 guidelines. Items must be packed on standard wooden pallets, properly labeled with UCC/EAN-128 barcodes using Application Identifiers for PSCN or NSN, and include all required human-readable data such as manufacturer name, part number, manufacture date, and expiration date. Each item must be stamped or etched with the manufacturer and part number. Deliveries are to be made DDP to the specified military bases, with payment processed electronically via direct deposit or wire transfer to designated Canadian Forces accounts. The contract requires strict adherence to defense-specific clauses covering controlled goods, anti-forced labor, international sanctions, data protection, and security clearance obligations, with the Government retaining the right to inspect goods at any point in the supply chain. Contractors must certify Canadian content eligibility and comply with all applicable procurement ethics, including the Federal Contractors Program for Employment Equity, and provide comprehensive documentation including technical and financial offers in English or French through the Government Electronic Tendering Service or CPC Connect by the deadline of August 10, 2026, at 14:00 EDT. No contract value is specified, and pricing must be submitted in separate spreadsheet and PDF formats, with the PDF deemed authoritative in case of discrepancies.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

Fluke 5560A/2G Multi-Product Calibrators

Solicitation # W8486-270947A

The Department of National Defence, under the Government of Canada, has issued a solicitation for the procurement of Fluke 5560A/2G Multi-Product Calibrators, with a response deadline of August 12th, 2026, and a requested delivery date of January 15th, 2027. Each calibrator must be accompanied by a Certificate of Calibration dated no more than 90 days prior to delivery, ensuring recent and verified accuracy. The solicitation, identified by number W8486-270947A, was published on Buyandsell on July 29th, 2026, and will remain active for 15 calendar days. The contract is open to federal procurement, with no specific set-aside designated, and performance is anticipated to occur in Canada. Viktoria Melnichuk serves as the primary point of contact for inquiries, reachable via email and phone, and all bids must be submitted through the official tender portal before the deadline.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

DEADLINE

Solar Powered LED Strobe Lights

Solicitation # W8486-260728/A

The Department of National Defence is seeking solar-powered LED strobe lights with a red light output, specified under UNSPSC 39110000 and part number 3337-00001, with NCAGE code 0GWV8 or an equivalent alternative. The requirement is for delivery to two locations: 25 CFSD Montreal at 6363 Rue Notre Dame St E in Montreal, Quebec, and 7 CFSD Edmonton at 195 Ave & 82nd Street in Edmonton, Alberta. Each item is quoted per unit, and bidders proposing substitute or equivalent products must clearly identify the brand, model, part number, and NCAGE code of the alternative being offered. The Crown reserves the right to negotiate terms with any supplier during the procurement process. All documentation may be submitted in either English or French, Canada’s official languages. The solicitation, titled Solar Powered LED Strobe Lights, is identified by number W8486-260728/A and was posted on July 29, 2026, with a deadline for responses set for September 7, 2026, at 7:00 PM Eastern Time. The procurement is conducted under the Government of Canada’s federal procurement framework, managed by the Department of National Defence, with Robert Coffin serving as the primary contracting authority, reachable via robert.coffin@forces.gc.ca. The place of performance covers both Quebec and Alberta, excluding the National Capital Region. Bidders must ensure compliance with delivery specifications and provide full details for any proposed alternative product to be considered valid.

Electric Lamp Bulb and Other Lighting Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Electrical Load Banks

Solicitation # W6369-27-X002

The Department of National Defence, through Defence Research and Development Canada, is seeking to procure Electrical Load Banks to support field trials at an Arctic site and the Over The Horizon Radar test bed at the Shirley’s Bay location in Ottawa. The requirement is part of the broader OTHR Initiative and mandates that all deliverables be ready for shipment no later than 90 days after contract award. The procurement is conducted under the Canadian Free Trade Agreement and the Canada-Korea Free Trade Agreement and is subject to a Comprehensive Land Claims Agreement. The Crown intends to award a single contract based on the highest combined rating of the Inuit Benefit Plan commitment and price, with no limitation to firms registered in the Inuit Firm Registry, and retains the right to negotiate with any supplier. There is no security clearance requirement for this procurement. Proposals must be submitted by July 31, 2026, and may be filed in either official language of Canada. The contracting authority is Scarlet Torraka Almendarez, reachable via email at scarlet.torrakaalmendarez@forces.gc.ca, and the solicitation number is W6369-27-X002. The Department reserves the right to withhold award regardless of the submissions received, and in the event of a discrepancy between the notice and the full request for proposals, the RFP takes precedence. No contract currently exists for this requirement.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE