Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

HVAC and Climate Control Maintenance

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled HVAC and Climate Control Maintenance is a subcontract issued by the Department of Defense under the agency name FA8601 Aflcmc Pzio, focused on servicing heating, ventilation, and air conditioning systems to maintain operational efficiency. The solicitation was posted on July 17, 2026, with a response deadline of July 31, 2026, and falls under the NAICS code 238220 for HVAC installation and maintenance services. Performance of the work is required at Wright Patterson Air Force Base, indicating the need for on-site technical support and system upkeep in a federal military facility. While the type of set aside and organization type are unspecified, the contract is structured as a subcontract, suggesting the prime contractor will delegate this specialized maintenance work to a qualified vendor. The lack of a point of contact and detailed address information implies that further inquiry must be made through the provided SAM.gov link to obtain additional procedural or qualification details.

General Info

HVAC maintenance subcontract for Wright Patterson AFB under DOD, solicited July 2026, NAICS 238220.

Agency

Department Of Defense → FA8601 Aflcmc PzioView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Wright Patterson AFB, OH, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8601 Aflcmc Pzio
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → FA8601 Aflcmc Pzio
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Servicing heating, ventilation, and air conditioning systems to ensure operational efficiency.

Similar Contracts

Same NAICS industry code

NAICS: 238220
New
International
LLM26025 - Saskatchewan Polytechnic Moose Jaw - Chiller ReplacementThe Government of Saskatchewan, through SaskBuilds and Procurement, is inviting qualified suppliers to submit bids for the replacement of the chiller at Saskatchewan Polytechnic’s Moose Jaw campus under solicitation number 316-2026. The project requires the supply and installation of a new chiller unit, including the removal and proper disposal or recycling of the existing system, salvage of the compressor installed in 2025, restoration of the roof beneath the unit, crane installation of the new chiller onto the roof, and full mechanical, electrical, and controls integration with the building’s existing infrastructure. All work must result in a fully operational HVAC system compliant with project specifications. A non-mandatory Pre-Tender Site Meeting is available for bidders to gain further insight into the site conditions and requirements. Bidders must be registered on the Government Enterprise Management (GEM) system to access competition documents, submit questions, receive updates, and formally submit their bids. The opportunity was posted on July 17, 2026, and responses are due by August 12, 2026. All amendments and communications will be issued exclusively through the GEM portal. For registration or technical assistance, suppliers are directed to the GEM website and may contact Tina Munro at rfxquestions@gov.sk.ca.
SaskBuilds and Procurement

POSTED

about 15 hours ago

DEADLINE

in 26 days
View Details
NAICS: 238220
New
SLED
Volusia County Branch Jail Air Handler-Fire Suppression System Removal, Replacement and UpgradeVolusia County is undertaking a comprehensive, integrated renovation of its Branch Jail facility in Daytona Beach to replace aging and noncompliant building systems that have reached end-of-life. The project involves full replacement of all chilled water air handling units, fire and smoke dampers, the obsolete building automation system, and the fire alarm system, all of which are no longer functional, supported, or code-compliant for a detention environment. The existing HVAC infrastructure, including interconnected ductwork and damper relay panels, is degraded and lacks the ability to isolate smoke events to individual housing pods, posing significant life safety risks. The fire alarm system fails to meet current standards including the Florida Fire Prevention Code, NFPA 72, NFPA 101, and UL 864, and cannot support the required redundant fiber optic loop architecture. All systems will be upgraded simultaneously to modern, UL-rated, corrosion-resistant components with full per-pod smoke isolation and purge capability, integrated into a new, expandable Compass Controls building automation system. Work will be executed while the facility remains fully occupied, requiring strict coordination with security, implementation of fire watch protocols, phased construction, and temporary cooling solutions to maintain operational safety. The County has engaged Above Group Engineering & Consulting as mechanical engineer of record and Dewberry Architects Inc. as architect of record to deliver this high-stakes, single-phase upgrade under solicitation number 26-B-110IF, with proposals due by August 20, 2026.
Corrections

POSTED

about 15 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 238220
New
SLED
626 N EAST ST - NEW FURNACE, A/C UNIT & WATER HEATERThe City of Jackson Community Development Department is soliciting competitive, sealed bids for essential home repairs funded through its program, specifically targeting qualified homeowners at 626 N East St, involving the installation of a new furnace, air conditioning unit, and water heater. Bidders must be registered on Sam.gov prior to submission, hold all necessary state and local licenses, and secure required permits for the work. Proposals will be evaluated primarily on the lowest responsive bid from qualified contractors, ensuring cost-efficiency while maintaining compliance with program standards. All project work must be performed in accordance with applicable codes and regulations, with no exceptions for incomplete or unlicensed participants. The solicitation, identified as 2026-COMMUNITY DEVELOPMENT-036, was posted on July 17, 2026, with a firm deadline for submissions set for July 30, 2026, at 1:00 PM. The work is to be performed in Jackson, Michigan, under the oversight of the Community Development Department of the State of Michigan. Primary point of contact for program-related inquiries is Sven Harrison, Rehab Coordinator, reachable at 517-414-9117 or sharrison@cityofjackson.org, while Kari Kerstetter, Purchasing Coordinator, can be contacted at 517-768-6401 or kkerstetter@cityofjackson.org for procurement matters. All bids must be submitted through the official procurement portal linked in the solicitation, and participation is limited to entities that meet all regulatory and administrative requirements outlined in the notice.
Community Development

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 238220
New
SLED
As-Needed Chillers and Hot Water Generators Preventative Maintenance and Repair ServicesThis contract provides as-needed preventative maintenance and repair services for chillers and hot water generators at San Francisco International Airport, funded through local sources. The contract duration spans a defined number of years with two optional one-year extensions, but no Contract Service Order may be issued more than four years after the contract’s certification date, regardless of the initial term. The total not-to-exceed amount is specified and serves as the financial ceiling for all work performed under this agreement. Bidders must hold a valid California Contractor’s License in one of the designated classifications and are required to subcontract a specified percentage of the contract value to Local Business Enterprises. A virtual pre-bid meeting is scheduled for informational purposes, and all bids must be submitted electronically via the Airport’s e-procurement portal by the stated deadline, with original bid documents mailed in sealed envelopes and postmarked no later than the submission date. Bids will be opened virtually using Microsoft Teams, and participation in the bid opening is optional but available for observers. A site visit is also part of the process, with details outlined in the project timeline. Primary contact for project-related inquiries is Mike Lynch, while Hirokazu Sato serves as the contract administrator.
Facilities Maintenance

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → FA8601 Aflcmc Pzio

Same awarding agency

NAICS: 339920
New
Federal
Golf/Multi-Sport Simulator SystemThe U.S. Air Force, through the 88th Force Support Squadron at Wright-Patterson Air Force Base, is seeking a commercial-grade golf and multi-sport simulator system under a full and open competition using NAICS code 339920, with a small business size standard of 750 employees. The procurement is being conducted as a Request for Quotation under solicitation number FA8601-26-Q-0105, with quotes due by 31 July 2026 at 11:00 AM EDT. The system must include delivery, installation, and training for use at the base Community Center, providing a professional sports experience for military members, families, and authorized patrons. The period of performance is anticipated to be 30 days after award, and the acquisition will result in a firm-fixed price purchase order awarded to the lowest price technically acceptable offeror whose quote demonstrates full compliance with the Statement of Work and includes a complete description of the services and equipment provided. All offerors must be currently registered in the System for Award Management (SAM), with their registration updated within the past 12 months, and must certify compliance with CMMC Level 1 requirements by self-attesting to 15 basic safeguarding controls for Federal Contract Information in the Supplier Performance Risk System. Quotes must be submitted via email to both the Contract Specialist and Contracting Officer, with a strict requirement that the entire submission—including attachments—be contained in a single email not exceeding 5 megabytes, using only approved file formats such as .pdf, .doc, .docx, .xls, or .xlsx; compressed or executable files are prohibited and will be filtered out. The subject line must precisely match the solicitation number and title. Offerors must also fully complete and return the required information sheet attached to the solicitation; submissions containing pricing alone without detailed service descriptions will be deemed nonresponsive. Additionally, contractors are prohibited from including customs duties in pricing, must comply with the Service Contract Act and associated wage determinations for Ohio, provide paid sick leave at the rate of one hour for every 30 hours worked up to 56 hours annually, and may not pass uniform maintenance costs to employees. Pricing must be submitted in whole dollars, and quotations will be held firm for 60 days after the due date. The government reserves the right to cancel the solicitation without obligation, conduct interchanges with offerors, and make no award if quotations are deemed non-com
Sporting and Athletic Goods Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 13 days
View Details
NAICS: 337214
New
Federal
AFLCMC IDO Facility F20016 Furniture_Project 2026SH100This solicitation, FA860126Q0088, is a combined synopsis and solicitation for commercial furniture supplies and services to support the AFLCMC IDO Facility F20016 at Wright-Patterson Air Force Base, Ohio, under a total small business set-aside using NAICS code 337214, with a small business size standard of 1,100 employees. The requirement includes the delivery, installation, and design of workstations, hot desks, and task chairs in accordance with the Statement of Work, along with freight, receiving, delivery, electrical hook-up, and related services. All items must be delivered within 120 days after receipt of order, with FOB Destination terms applying, and installations must occur on-site at the specified location. The Government will not consider any offer that fails to include a completed Required Information Sheet or lacks sufficient detail on the supplies or services being offered, and quotes must be submitted via email as a single attachment not exceeding five megabytes, excluding compressed files, with the required subject line and in whole dollars. The offeror must hold prices firm for 60 days following the quote deadline. Compliance with cybersecurity requirements is mandatory and non-negotiable; offerors must achieve and document a CMMC Level 1 self-assessment aligned with FAR 52.240-93, reporting results within the Supplier Performance Risk System (SPRS) in the Procurement Integrated Enterprise Environment. Failure to achieve full compliance or to properly record the assessment will disqualify the offer. Additionally, all vendors must maintain an active, current, and accurate registration in the System for Award Management (SAM), with annual representations and certifications updated within the past 12 months, including accurate business size certification for NAICS 337214. The contract mandates Unique Item Identification per MIL-STD-130 and MIL-STD-129 on all items, with machine-readable marking and reporting via the Material Inspection and Receiving Report. Contractors must also comply with prohibitions against including customs duties in pricing, conform to NFPA 70 and NFPA 101 safety standards, and ensure electrical connections are made by certified MECA electricians. Payment is processed through Wide Area WorkFlow, and no payment will be released until all punch list items are closed following a post-installation walkthrough. The award will be made to the lowest-priced offer that meets all technical and compliance requirements, with the
Office Furniture (except Wood) Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 3 days
View Details