Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

HVAC & Mechanical Contractor

Active

Federal

Response Deadline09/21/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity for an HVAC and Mechanical Contractor supports FEMA Region 6 facility projects in Denton, Texas. The selected contractor will provide HVAC installation, modification, and system balancing services for prime contractors, including the relocation and capping of utilities. All work must be performed in accordance with ASHRAE and local building codes, culminating in the delivery of a functional system and a formal Testing, Adjusting, and Balancing report. This opportunity is specifically set aside for SBA Certified Women-Owned Small Businesses under NAICS code 238220. The project is managed by the Department of Homeland Security, with a response deadline of September 21, 2026.

General Info

HVAC subcontract for FEMA Region 6 in Texas, set aside for women-owned small businesses.

Agency

Department Of Homeland Security → Region 6View Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Denton, TX, 76209, USA

Set-Aside

WOSB

Documents

This scope was carved out of 70FBR626R00000012.

The full solicitation package (6 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FEMA Region 6 Regional Watch Center Renovations

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 13

subcontract

Response DeadlineSep 21

Submission deadline

Response Deadline

09/21/2026, 04:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Region 6

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Region 6

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs HVAC installation, modification, and system balancing for prime contractors on FEMA Region 6 facility projects. Relocates and caps HVAC utilities, installs or modifies HVAC systems, and performs Testing, Adjusting, and Balancing (TAB) using ASHRAE and local building codes. Delivers a functional HVAC system and a formal TAB report.

Similar Contracts

Same NAICS industry code

ICE 8A - Ft Benning Improvements

Solicitation # 70CMSW25R00000011

This firm-fixed-price task order, issued under an 8(a) Multiple Award Construction Contract (MACC) for the DHS Immigration and Customs Enforcement Office of Firearms and Tactical Programs, provides for design-build services to implement life, safety, and operational improvements at Fort Benning, Georgia. The project scope encompasses multiple facility upgrades, including the installation of aluminum awnings, turf replacement at Fiske Range, the demolition and site restoration of Building 2294, gutter and drainage improvements at Building 234, commercial HVAC unit replacements, and general facility improvements for Building 301 and the DAGr Team facility. The estimated magnitude of the contract is between 4.0 million and 4.5 million dollars, with a period of performance not to exceed 365 days from the date of award. The award will be granted to the contractor proposing the lowest total evaluated price, provided they demonstrate a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Compliance with the Davis-Bacon Act is required, including adherence to wage determination GA20260320 and federal paid sick leave requirements. Performance and payment bonds are mandatory per FAR 52.228-15. Administrative requirements include electronic invoicing via the Invoice Processing Platform and the submission of certified payroll with all payment requests. Technical oversight and final inspection will be managed by the Contracting Officer's Representative.

Bristol Alliance of Companies

POSTED

about 5 hours ago

DEADLINE

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

This firm-fixed-price construction project, issued under an 8(a) Multiple Award Construction Contract (MACC) IDIQ, involves the replacement and upgrade of Rooftop HVAC Units (RTUs) and SCADA systems at the Port Isabel Detention Center in Los Fresnos, Texas. The scope of work includes replacing corroded and obsolete RTUs for the Alpha, Bravo, Charlie, and Delta dorms with high-quality, coastal weather-resistant, and energy-efficient units. Additionally, the contractor must replace the current SCADA software, install two chemical feed pumps, and ensure system continuity between water and wastewater plants in compliance with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. The award will be based solely on the lowest total evaluated price. Proposals must include a detailed pricing breakdown by CSI division, a Quality Control Plan, and a safety program. Key requirements include a one-year contractor warranty for installation and craftsmanship, adherence to Davis-Bacon Act wage determinations, and the designation of a Project Manager with at least five years of relevant federal contracting experience. All work must be performed by manufacturer-certified installers, and personnel must undergo background checks for facility access. Invoicing is conducted electronically via the Invoice Processing Platform and must be accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 5 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work requires the replacement of 43 smoke detectors across specific dormitory rooms, including 12 detectors in rooms 11, 15, and 18, 12 detectors in room 19, and 19 detectors in rooms 20 and 21. The contractor must ensure all installed detectors communicate with the fire panel and that all work adheres to NFPA standards and local Authority Having Jurisdiction requirements. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, applicants must provide a completed bid sheet, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220. Award decisions will be based on the best value as determined by MTC. The contract mandates compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for labor rates in Washoe and Storey counties. Additionally, subcontractors must provide a 12-digit Unique Entity ID and certify their debarment status under FAR 52.209-6 if the subcontract exceeds 30,000 dollars. Strict adherence to government and Department of Labor guidance regarding the protection of sensitive and proprietary information is required.

Sierra Nevada Job Corps Center

POSTED

about 5 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management and Training Corporation is seeking fixed-price lump sum bids for a subcontracting opportunity to replace a 20hp motor connected to the rooftop HVAC system at the Clearfield Job Corps Center in Clearfield, Utah. The selected contractor must provide all labor, materials, equipment, and permits necessary to ensure the system is fully operational, including the delivery of startup and testing documentation. Bids are due by September 19, 2026, and must be submitted via email to the designated procurement contacts. To be considered for award, bidders must complete a physical site visit, sign an attendance roster, and provide a bid bond guarantee. Award decisions will be based on overall best value. The contract requires strict adherence to Davis-Bacon prevailing wage rates for Davis County, OSHA safety standards, and federal, state, and local codes. Eligible bidders must be small businesses and provide a comprehensive cost breakout on company letterhead covering materials, labor, equipment, and overhead. Required documentation includes a 12-digit Unique Entity ID, tax identification, and a completed supplier self-certification form. Upon receipt of an Intent to Award letter, the contractor must submit original payment and performance bonds from a surety company with at least an A- rating within five business days. Payment will be processed via pay applications using AIA G702 and G703 forms based on a previously submitted Schedule of Values.

Management & Training Corporation

POSTED

about 5 hours ago

DEADLINE

Joliet JCC Dorm Bathroom Renovations

Solicitation # joliet-jcc-dorm-bathroom-renovations

Joliet Job Corps

POSTED

about 5 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a fixed-price, single lump sum subcontract to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. The project involves a four-phase scope of work including environmental safety and refrigerant recovery per EPA Section 608 regulations, demolition and removal of the failed unit, installation of an OEM-specified compressor with new filter-driers and heaters, and final system commissioning. The estimated price range for the project is between 0 and 25,000 dollars, and the awarded contractor must complete all work within 30 consecutive business days following the written Notice to Proceed. Bids are due by September 23, 2026, and will be evaluated based on overall best value, considering price, quality, and delivery schedule. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Bidders must conduct a physical site visit and submit their proposal using the MTC Bid for Lump Sum Contract form. For bids equal to or greater than 25,000 dollars, a 20 percent bid bond is required, along with performance and payment bonds from an A-rated surety company. Compliance with the Davis-Bacon Act and Washoe County prevailing wage rates is mandatory. Final payment is contingent upon the submission of a Notice of Final Completion, certified payroll reports, and operation and maintenance manuals.

Sierra Nevada Job Corps Center

POSTED

about 5 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking a subcontractor to replace a failing air-cooled chiller at the North Texas Job Corps Center, located in Building 214/215 in McKinney, Texas. The scope of work includes the demolition and disposal of the existing chiller and the installation and startup of a new air-cooled chiller. Additional requirements involve the installation of a JACE 9000 central integration point for building automation controls, the installation of four 3-way control valves at air handling units, and the cleaning, inspection, and belt replacement of four air handling units, including the replacement of three VFDs. All wiring must be plenum-rated, and the contractor must provide manufacturer equipment cut sheets and warranty information. This solicitation is open to various small business set-asides, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Bids are due by September 18, 2026, and quotes must remain valid for 90 days. Required submission documents include manufacturer specifications, Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars, and a Certificate of Liability Insurance naming Serrato Corporation as the holder. Insurance minimums include 1 million dollars for Commercial General Liability and Comprehensive Automobile Liability, and 500,000 dollars for Employers Liability. The project requires a final startup and operational test for the chiller and the return of air handling units to service with verified proper operation.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 5 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02, managed by PTSI Managed Services Inc. for the FAA, involves HVAC and electrical upgrades at the Fairbanks facility in Alaska. The project scope includes the replacement of the Fairbanks FSS chiller, four AC units, and chilled-water piping, along with associated electrical system updates, specifically modifications to Panel P1 and HVAC circuits. To maintain operational continuity, the contractor must provide temporary and redundant cooling throughout the construction period. The project concludes with system startup, testing, commissioning, FAA training, punch-list completion, and final closeout. The estimated construction magnitude for this effort is between 250,000 and 500,000 dollars, with a proposed start date of April 15, 2027. This is a presolicitation opportunity under NAICS code 238220, with set-aside opportunities for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, Veteran-Owned, and Service-Disabled Veteran-Owned small businesses, as well as Alaskan small businesses. The primary point of contact for this requirement is Masanori Akers.

PTSI Managed Services Inc.

POSTED

about 5 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 5 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a pad-mounted gas-fired packaged HVAC unit at the Atterbury Job Corps Center in Edinburgh, Indiana, specifically within building 1091 (Glazing, HEO, Welding). The scope requires replacing an existing 10-ton Carrier unit, built in 2002, with a new 12.5 SEER unit utilizing non-R22 refrigerants such as R-410A or R-454B. The contractor will reuse existing electrical disconnects, ductwork, and thermostat wiring. Post-installation, the old unit and any recovered refrigerant must be labeled and left at the maintenance building for parts recovery. The contract is a single lump sum award based on best value, with evaluation weighted toward price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Mandatory requirements for bidders include a site visit on September 23, 2026, a valid Indiana Contractor's License, active SAM.gov registration with a Unique Entity ID, and compliance with Davis-Bacon Act wage rates. The selected contractor must provide a sequenced construction schedule within 10 days of the Notice to Proceed and start work within 14 days. Payment terms are Net 30, and the contractor must provide a one-year guarantee of workmanship along with manufacturer warranties. All work must adhere to EPA, OSHA, and local Indiana building codes.

Adams & Associates, Inc.

POSTED

about 5 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

Adams and Associates, Inc. is soliciting a single lump sum contract to replace the HVAC systems at the ABL Dormitory within the Atterbury Job Corps Center in Indiana. The project involves replacing existing R-22 Bryant air-cooled condensing units and compatible coils serving common areas and dormitory wings A, B, C, and D with new 12.5 SEER packaged units utilizing non-R22 refrigerants such as R-410A or R-454B. The scope requires the reuse of existing electrical disconnects, ductwork, and thermostat wiring, while all recovered refrigerant must be labeled and left on-site. The selected contractor must provide a sequenced construction schedule within 10 days of the Notice to Proceed and start work within 14 days of that notice. Award will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID, hold a valid State of Indiana contractor's license, and provide proof of automobile and workers' compensation insurance naming Adams and Associates, Inc. as an additional insured. Compliance with EPA, OSHA, and Davis-Bacon Act wage determinations is mandatory. Final payment is contingent upon the submission of a completed SF 1413, certified payroll records, and the release of liens from all subcontractors and suppliers. Proposals must be submitted on company letterhead to Tammy Swallows by the October 5, 2026, deadline.

Adams & Associates, Inc.

POSTED

about 5 hours ago

DEADLINE

AAL-0810-01 Sitka (SIT) Flight Service Station (FSS) Fire Esc

Solicitation # AAL-0810-01

Solicitation AAL-0810-01 is a design-build construction project for the Sitka Flight Service Station in Sitka, Alaska. The scope of work involves the design and construction of an access stair platform serving the third floor of the facility. The contractor will be responsible for the entire project lifecycle, including the initial site survey, obtaining necessary permits, final design, construction, inspections, punch-list completion, and the delivery of as-built drawings. The project has an estimated construction magnitude between 250,000 and 500,000 dollars and is proposed to start on February 1, 2027. This opportunity is designated as a set-aside for various small business categories, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, and Veteran-Owned Small Businesses. The procurement is managed by PTSI Managed Services Inc. under NAICS code 238220.

PTSI Managed Services Inc.

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Homeland Security → Region 6

Same awarding agency

EMCC Equipment SupplierThis subcontract opportunity is for an EMCC Equipment Supplier to provide industrial-grade Motor Control Center components for prime contractors working on Department of Homeland Security and FEMA Region 6 facility projects. The supplier is responsible for manufacturing or sourcing electrical main panels, breakers, switches, and mounting hardware that adhere to specific design requirements, ensuring all equipment is UL listed and compliant with current regulatory and safety standards. All specified electrical components must be delivered to the project site located in Denton, Texas. The contract is designated as a set-aside for SBA Certified Women-Owned Small Businesses under NAICS code 335311. Interested parties must respond by September 18, 2026, following the posting date of September 13, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

DEADLINE

Electrical Hazardous Waste Removal and DisposalThis subcontract for Electrical Hazardous Waste Removal and Disposal supports Department of Homeland Security FEMA Region 6 facility projects in Denton, Texas. The selected provider will be responsible for identifying, removing, and disposing of obsolete electrical components containing lead, mercury, and PCBs. All work must be performed using specialized hazardous material containment and transport equipment in strict accordance with federal, state, and local environmental regulations. The opportunity is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 562910. Qualified contractors must hold hazardous materials handling certifications and maintain U.S. citizenship. Key deliverables include the provision of disposal manifests and comprehensive environmental compliance reports to ensure all regulatory requirements are met.

Remediation Services

POSTED

DEADLINE

Electric Motor Control Center (EMCC) InstallationThis subcontract involves the installation of a new Electric Motor Control Center for prime contractors at a DHS/FEMA Region 6 facility in Denton, Texas. The scope of work includes furnishing and installing EMCC panels, wiring, breakers, and switches, ensuring full integration with existing infrastructure. All work must be tested, inspected, and commissioned in accordance with NFPA 70E and OSHA standards to deliver a fully operational system. The project is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 238210. Personnel requirements specify that work must be performed by Journeyman Electricians who hold U.S. citizenship and can pass required background investigations. The solicitation was posted on September 13, 2026, with a response deadline of September 18, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Design & Engineering ConsultantThis subcontract opportunity for a Design and Engineering Consultant supports prime contractors on FEMA Region 6 facility projects. The selected consultant will be responsible for design-build planning and facility approval documentation, which includes conducting site surveys, creating design submittals, developing facility approval packages, and producing as-built drawings via CAD software. A Professional Engineering license is required to perform this work, with final deliverables consisting of the facility approval package and complete design documentation. The project is based in Denton, Texas, and is specifically set aside for SBA Certified Women-Owned Small Businesses under NAICS code 541330. This requirement is managed by the Department of Homeland Security within Region 6. Interested parties must respond by September 21, 2026.

Engineering Services

POSTED

DEADLINE

Demolition & Site Prep ContractorThis subcontract opportunity with the Department of Homeland Security Region 6 involves providing selective demolition and site preparation services for facility projects in Denton, Texas. The contractor is responsible for the demolition of existing structures, the installation of protective barriers, and the implementation of dust and noise control measures in accordance with OSHA standards. The scope of work includes the use of specialized demolition tools and waste hauling equipment to deliver a cleared site ready for subsequent construction. This opportunity is specifically set aside for SBA Certified Women-Owned Small Businesses under NAICS code 238910. Interested parties must submit their responses by September 21, 2026, at 4:00 PM.

Site Preparation Contractors

POSTED

DEADLINE

Environmental Testing & Abatement ContractorThe Environmental Testing and Abatement Contractor is a subcontract opportunity with the Department of Homeland Security for FEMA Region 6 facility projects. The contractor is responsible for performing hazardous material testing and remediation, specifically focusing on asbestos and hazardous materials. This includes conducting limited abatement using specialized PPE and waste containment systems to ensure full compliance with OSHA and NEPA regulations, as well as providing all necessary test reports and clearance documentation. This opportunity is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 562910. The place of performance is located in Denton, Texas. Interested parties must respond by September 21, 2026, following the posting date of September 13, 2026.

Remediation Services

POSTED

DEADLINE

IT & Network Infrastructure ContractorThis subcontract opportunity is for an IT and Network Infrastructure Contractor to support prime contractors on FEMA Region 6 facility projects in Denton, Texas. The selected provider will be responsible for delivering a fully functional network infrastructure, which includes installing Cat6 and fiber data cabling, network racks, and integrating communications systems for up to eight users. Due to the nature of the work, all personnel must undergo background investigations to gain access to government information resources. The project is designated as a set-aside for SBA Certified Women-Owned Small Businesses under NAICS code 238210. Interested parties must respond by September 21, 2026, to the Department of Homeland Security.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Electrical & Life Safety ContractorThis subcontract opportunity with the Department of Homeland Security Region 6 involves the installation of electrical systems, power distribution, and life safety systems for prime contractors at FEMA facilities in Denton, Texas. The scope of work includes relocating, disconnecting, and capping affected power utilities, installing unclassified power, and updating electrical panel directories. All installations must strictly adhere to National Electrical Code and NFPA standards, with final deliverables consisting of the completed electrical systems and detailed as-built drawings identifying all relocated circuits. The project is designated as a set-aside for SBA Certified Women-Owned Small Businesses under NAICS code 238210. Interested parties must submit their responses by September 21, 2026, at 4:00 PM.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

SCIF & Secure Construction SpecialistThis subcontract opportunity is for a SCIF and Secure Construction Specialist to perform specialized construction for prime contractors on FEMA Region 6 facility projects in Denton, Texas. The scope of work involves delivering a certified secure space by reinforcing walls and ceilings, implementing security zoning, establishing controlled entry sequences, and installing classified storage. All construction must utilize acoustic and RF shielding and reinforced materials that adhere to HSPD-5 standards. The project is set aside for SBA Certified Women-Owned Small Businesses under NAICS code 238990. Due to the nature of the work, all personnel must possess adjudicated background investigations. The solicitation was posted by the Department of Homeland Security for Region 6, with a response deadline of September 21, 2026.

All Other Specialty Trade Contractors

POSTED

DEADLINE

FEMA Region 6 Electric Motor Control Center Replacement

Solicitation # 70FBR626R00000021

The FEMA Region 6 Electric Motor Control Center Replacement is a firm-fixed-price contract aimed at replacing the facility's aging electrical main panel in Denton, Texas, to ensure operational continuity and regulatory compliance. The project requires the contractor to act in a design capacity to remove and dispose of obsolete equipment and hazardous materials, such as lead, mercury, and PCB-containing components, and install a modern motor control center including all necessary wiring, breakers, and switches. All work must adhere to OSHA and NFPA 70E standards, with the contractor providing as-built drawings, O&M manuals, and staff training upon completion. The acquisition is set aside for Women-Owned Small Businesses (WOSB) and Economically Disadvantaged Women-Owned Small Businesses (EDWOSB), with the award based on the Lowest Price Technically Acceptable (LPTA) criteria. Eligible offerors must demonstrate the ability to perform within a 150-mile radius of the Denton facility and provide at least three relevant project examples completed within the last five years. While the solicitation lists a general performance period from September 28, 2026, to September 27, 2027, the Statement of Objectives specifies a more condensed timeline of 90 days starting September 30, 2026. Security requirements mandate that all personnel be U.S. citizens who have passed a favorable background investigation and executed a DHS Non-Disclosure Agreement.

Electric Power Distribution

POSTED

DEADLINE

FEMA Region 6 Regional Watch Center Renovations

Solicitation # 70FBR626R00000012

Commercial and Institutional Building Construction

POSTED

DEADLINE

Various Licenses and Cables for FEMA Region VI

Solicitation # 70FBR626Q00000041

FEMA Region VI is soliciting quotes under RFQ 70FBR626Q00000041 for the procurement of Shure ANX4 Incremental Channel Expansion Licenses and UniFi Indoor Cat6A CMP cable to support the Federal Regional Center and the Texas Room in the Russell Newman Building. This open market acquisition falls under NAICS 541519 and is available to unrestricted vendors, including WOSB, EDWOSB, and SMB entities. The award will be determined on a Lowest Price Technically Acceptable (LPTA) basis, with an affordability range of 47,000.00 dollars. All provided licenses must be valid OEM or publisher-authorized entitlements, and all cable supplies must be new, genuine OEM products that are TAA compliant. Quotes must be submitted via email to Destiny Dyson by 1:00 PM CT on September 22, 2026, and must include itemized pricing for each CLIN. Delivery of all items is required within 65 calendar days after receipt of order, with software licenses delivered electronically and cable supplies shipped FOB Destination. Invoicing must be completed using Standard Form 1034 in PDF format and submitted to the FEMA Finance Center. The procurement is subject to Section 889 restrictions regarding covered telecommunications equipment and services, and the nonmanufacturer rule does not apply as the acquisition is at or below the Simplified Acquisition Threshold.

Other Computer Related Services

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS