Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

HVAC Chiller System

Active

N6284126R3005Federal

Response Deadline09/10/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Department of Defense, through the Commanding Officer in Cape Canaveral, Florida, is seeking a contractor for the HVAC Chiller System project under solicitation N6284126R3005. The scope of work involves the replacement of two existing air-cooled chillers with two new 100-nominal-ton air-cooled screw chillers. The required equipment must be Trane CGAM100 or a government-approved equivalent, featuring a 460V/60Hz/3-phase configuration and utilizing R-454B refrigerant. This combined contract opportunity falls under NAICS code 238220 and is being performed in Cape Canaveral, Florida. Interested parties must submit their responses by the deadline of September 10, 2026. Primary coordination for this requirement is handled by Natalie Lucas.

General Info

DoD seeks contractor to replace two HVAC chillers in Cape Canaveral by 2026.

Agency

Department Of Defense → Commanding OfficerView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Cape Canaveral, FL, 32920, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseCombined Synopsis

PostedSep 9

Combined Synopsis

Response DeadlineSep 10

Submission deadline

Response Deadline

09/10/2026, 04:00:00 PM UTCin about 14 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Commanding Officer

Contacts1 person available

OfficeCAPE CANAVERAL, FL, 32920-1623, USA

Organization / Agency

Department Of Defense → Commanding Officer

View Agency Profile

Office AddressCAPE CANAVERAL, FL, 32920-1623, USA

Contacts

Natalie Lucas

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

The contractor shall replace two existing air-cooled chillers with new Trane CGAM100 or Government-approved brand-name-equivalent equipment consistent with the approved acquisition strategy. The required configuration is two 100-nominal-ton air-cooled screw chillers, 460V/60Hz/3-phase, using R-454B refrigerant.

This is for information only.

Similar Contracts

Same NAICS industry code

Bid for HVAC Rooftop unit replacement for Whitfield Hall

Solicitation # 9240-27-R-IFBD-00004

The Mississippi University for Women is soliciting bids for the replacement of HVAC rooftop units at Whitfield Hall under solicitation number 9240-27-R-IFBD-00004. This turnkey project requires the replacement of RTU-1 and RTU-2 with two Trane 25-ton packaged electric/electric rooftop units. The scope of work encompasses all necessary labor, engineering coordination, equipment, materials, permitting, testing, startup, commissioning, and the disposal of old units. Contractors are responsible for crane and lift services, mandatory field verification of existing conditions, and coordinating with the owner to minimize operational disruptions. Responses for this solicitation are due by October 8, 2026, with the primary point of contact being Melissa Buxton. The project is located in Mississippi and is managed by the Facilities Maintenance Office. Bidders must adhere to specific submittal and coordination instructions to ensure the successful installation and integration of the new HVAC systems.

MISSISSIPPI UNIVERSITY for WOMEN

POSTED

about 8 hours ago

DEADLINE

ICE 8A - Ft Benning Improvements

Solicitation # 70CMSW25R00000011

This firm-fixed-price task order, issued under a MACC multiple-award IDIQ contract by the DHS Immigration and Customs Enforcement (ICE) Office of Firearms and Tactical Programs, seeks design-build services for life, safety, and operational improvements at Fort Benning, Georgia. The project has an estimated magnitude between 4.0 million and 4.5 million dollars and a period of performance not to exceed 365 days from the date of award. The scope of work includes multiple facility improvements such as the installation of two aluminum awnings, turf and target replacement at Fiske Range, the demolition of Building 2294, gutter and drainage improvements for Building 234, commercial HVAC unit replacements for Buildings 1836 and 2949, and general improvements to Building 301 and the DAGr Team facility. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sufficient technical understanding, a sound methodology, and the ability to staff the design team with licensed professionals. The contractor must adhere to Davis-Bacon Act labor standards, including specific prevailing wage rates and paid sick leave requirements for Georgia. Key administrative requirements include the submission of payment requests via the Invoice Processing Platform accompanied by certified payroll and the provision of performance and payment bonds. Proposals must be submitted in two volumes, consisting of a technical approach and safety and quality control plan in Volume I, and a detailed pricing template in Volume II.

Bristol Alliance of Companies

POSTED

about 9 hours ago

DEADLINE

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

This firm-fixed-price task order, issued under the 8(a) MACC IDIQ, involves the replacement and upgrade of Rooftop HVAC Units (RTUs) for the Alpha, Bravo, Charlie, and Delta dorms at the Port Isabel Detention Center in Los Fresnos, Texas. The project objective is to replace corroded and obsolete equipment with high-quality, coastal weather-resistant, and durable systems that incorporate the latest commercial and industrial HVAC technology. The scope of work includes removing existing units, replacing necessary piping, electrical, and ducting, and performing full commissioning and testing. Additionally, the contractor must replace the current SCADA software and install two chemical feed pumps, ensuring the new system is programmed for continuity with water and wastewater plants and complies with Texas Commission of Environmental Quality standards. The project has an estimated magnitude between 1.2 million and 1.5 million dollars with a period of performance of 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Key requirements include the appointment of a Project Manager with at least five years of federal contracting experience, the provision of a one-year contractor warranty for installation, and manufacturer certification for all proposed materials. All payment requests must be submitted via the Invoice Processing Platform and accompanied by certified payroll in accordance with Davis-Bacon wage determinations for Cameron County, Texas.

Bristol Alliance of Companies

POSTED

about 9 hours ago

DEADLINE

HVAC & Fire Protection System, Pumpwell 4, 704, PSNS

Solicitation # N4425526RB067

This project involves the design and installation of HVAC and fire protection systems for Pumpwell 4, a below-ground facility at the Puget Sound Naval Shipyard in Bremerton, Washington. The scope includes the demolition of the existing HVAC system and the installation of a new system designed to maintain a maximum 55 degree dewpoint and provide critical cooling for pump motors and electrical equipment, especially during drydock dewatering events. Performance requirements specify a minimum of 12 circulating fans with a combined airflow of 50,000 cfm, 30,000 cfm of outdoor air, and dedicated forced airflow of 15,000 cfm each for pump motors and electrical equipment to handle ambient temperatures up to 104 degrees. The fire protection scope requires the installation of a comprehensive safety system including a fire alarm, smoke exhaust, standpipes, and a preaction automatic sprinkler system compliant with UFC and NFPA standards. Electrical work involves connecting to a 480Y/277V three-phase power system and installing new panelboards and feeders. This is a firm-fixed-price contract issued under the NAVFAC Northwest 8(a) MACC, with a project magnitude between 1 million and 5 million dollars and a performance period of 480 days from award. The project is a 100 percent 8(a) set-aside and requires adherence to strict site logistics, including crane loading restrictions at Pier D and hazardous materials protocols.

Bristol Alliance of Companies

POSTED

about 9 hours ago

DEADLINE

in about 19 hours

CBP5933 Bldg. 225 HVAC Replacement

Solicitation # CBP5933

Management & Training Corporation (MTC) is seeking bids for a fixed-price, single lump sum subcontract to replace six split-system heat pump HVAC systems at the San Diego Job Corps Center in Imperial Beach, California. The scope of work includes the installation of three 2-ton and three 1.5-ton Payne heat pump systems with matching indoor air handlers, as well as the disposal of old equipment and the reuse of existing ductwork and electrical systems where feasible. The project must be completed within 30 consecutive business days following a written Notice to Proceed. Bids are due by September 11, 2026, and will be evaluated based on overall best value, considering price, quality, and delivery schedule. The opportunity is open to various small business categories, including SDB, WOSB, HUBZone, and SDVOSB, under NAICS code 238220. Compliance requirements are extensive, including adherence to the Davis-Bacon Act for prevailing wages, the Buy American Act, and various California and federal mechanical and electrical codes. For bids equal to or greater than $25,000, a bid bond of 20% is required, along with performance and payment bonds from an A-rated surety. Submission requirements include a formal bid form, a detailed cost breakout on company letterhead, and a UEI number. Final payment is contingent upon a retainage analysis and the submission of a Notice of Final Completion, certified payroll reports, and operation and maintenance manuals.

San Diego Job Corps Center

POSTED

about 10 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is seeking bids for a subcontracting opportunity to provide fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work involves the replacement and installation of 43 smoke detectors across several dormitory rooms, specifically 12 detectors in rooms 11, 15, and 18; 12 detectors in room 19; and 19 detectors in rooms 20 and 21. The contractor is responsible for providing all labor, transportation, and supervision, and must ensure all installed detectors communicate with the fire panel. All work must adhere to applicable NFPA standards and requirements set by the local Authority Having Jurisdiction. This is a fee-for-service contract awarded on a lump sum basis, with MTC serving as the sole judge of the best value bid. Eligible bidders include various small business categories, such as SDB, WOSB, HUBZone, VOSB, and SDVOSB, under NAICS code 238220. Mandatory submission requirements include a bid sheet, proof of insurance, a W-9, and a supplier self-certification form, with a deadline of September 18, 2026, at 3:00 PM PST. The contract requires compliance with Service Contract Labor Standards under Wage Determination 2015-5595 (Revision 28) and adherence to federal regulations regarding information security, the Buy American Act, and the disclosure of debarment status for subcontracts exceeding 30,000 dollars.

Sierra Nevada Job Corps Center

POSTED

about 10 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation (MTC) is seeking fixed-price lump sum bids for a subcontracting opportunity to replace a 20hp motor connected to the rooftop HVAC system at the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes the safe disconnection and disposal of the non-functioning motor, all necessary electrical work, rigging, crane services, roof weatherproofing, and site cleanup. The selected contractor must provide startup and testing documentation, conduct onsite training for maintenance personnel, and provide manufacturer O&M manuals. All work must comply with OSHA requirements, federal, state, and local codes, and site safety procedures. Bids are due by September 19, 2026, at 3:00 PM MST and must be submitted via email to Patricia Willover and Dar Nelson. To be considered, bidders must perform a physical site visit, submit a signed bid form, provide a detailed cost breakout on company letterhead, and include a bid bond guarantee. The award will be based on overall best value. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. Requirements include adherence to Davis-Bacon prevailing wage rates (UT20250083), submission of a 12-digit Unique Entity ID (UEI), and the provision of performance and payment bonds within five business days of an intent to award. Payment will be processed via AIA G702 and G703 forms based on a submitted Schedule of Values.

Management & Training Corporation

POSTED

about 10 hours ago

DEADLINE

Joliet JCC Sewer Vent Repairs

Solicitation # Joliet JCC Sewer Vent Pipe Repair

Management & Training Corporation (MTC) is seeking a subcontractor for sewer vent pipe repairs at the Joliet Job Corps Center located at 1101 Mills Road in Joliet, Illinois. The scope of work includes removing and disposing of deteriorated vent piping within the case wall, installing new code-compliant and watertight vent piping, and restoring access openings to a paint-ready condition. The contractor must verify the elimination of sewer gas leakage through system testing and provide manufacturer and installer warranties on company stationery. This is a fee-for-service contract awarded on a lump sum basis, with the award based on best value as determined by MTC. Eligible bidders must operate under NAICS code 238220 with a size standard of 19 million dollars. The opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Required submission documents by September 11, 2026, include a bid sheet, a W-9, a self-certification form, acceptance of terms and conditions, proof of insurance, and three references for similar projects. Compliance requirements include adherence to Service Contract Labor Standards under Wage Determination 2015-5019 Rev 31, various FAR clauses regarding trafficking in persons and minimum wages, and strict Department of Labor guidelines for protecting sensitive information. Invoicing is to be submitted weekly or bi-weekly to MTC.

MTC Joliet Job Corps

POSTED

about 10 hours ago

DEADLINE

RFQ#3191 Laundry Tray Installations

Solicitation # RFQ#3191

Management & Training Corporation (MTC) is seeking a subcontractor for RFQ 3191 to provide plumbing services at the Charleston Job Corps Center in Charleston, West Virginia. The scope of work involves providing all labor, materials, and supervision to furnish and install new laundry trays, approximately 25 by 22 inches, along with faucet sets in the Education restroom and the Men's and Women's CTT areas. While the center will handle all demolition and removal, the contractor is responsible for the installation, testing fixtures for proper flow and drainage, and removing all debris and packaging from the site. All work must comply with local plumbing codes and Job Corps facility standards. This is a fee-for-service contract awarded on a lump sum basis, with MTC serving as the sole judge of the best value. The opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB, under NAICS code 238220. Bids must be submitted via email to Wendy Lawrence by 3:00 PM EST on September 11, 2026. Required submission documents include a bid sheet, a completed supplier packet with a W-9 and self-certification, proof of insurance, and three references for similar projects. The contract is subject to several federal regulations, including Service Contract Labor Standards wage determination WD 2015-4347 and the Contract Work Hours and Safety Standards Act. Compliance requirements include FAR 52.204-10 for executive compensation reporting on projects over 40,000 dollars and FAR 52.219-8 for business category representation. Additionally, the contractor must adhere to Department of Labor guidelines regarding privacy breach notifications, mandatory employee training, and records management. Subcontractors are also required to obtain a Unique Entity Identifier (UEI) for reporting purposes.

Management & Training Corporation

POSTED

about 10 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is soliciting bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. The project requires the contractor to provide all labor, materials, and supervision to execute a four-phase process consisting of preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor, and final system testing and commissioning. All work must comply with EPA Section 608 regulations for refrigerant recovery and be completed within 30 consecutive business days following a written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedules. A physical site visit is mandatory prior to bid submission. For bids equal to or greater than 25,000 dollars, contractors must provide a bid bond of at least 20 percent of the base bid, as well as performance and payment bonds from a surety company with at least an A-rating. The contract is subject to the Davis-Bacon Act and requires adherence to prevailing wage rates for Washoe County. Additionally, subcontractors must provide self-certification of their business size and category under FAR 52.219-8 and submit a completed IRS W-9 form. Final acceptance is contingent upon the submission of a notice of final completion, certified payroll reports, and operation and maintenance manuals.

Sierra Nevada Job Corps Center

POSTED

about 10 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This project involves the removal and replacement of shower diverters in eight bathrooms across two dorm buildings in Indiana. The scope of work includes repairing or replacing damaged piping leading into the diverters and upgrading the existing Powers brand systems to Delta or a comparable style with readily available parts. The solicitation is open to various small business set-asides, including SDB, WOSB, HUBZone, and SDVOSB. A site visit is scheduled for September 1, 2026, at 10:30 AM, and all proposals must be submitted to Tammy Swallows via email by September 14, 2026, at 3:00 PM.

Adams & Associates

POSTED

about 10 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking a subcontractor to replace a failing air-cooled chiller in Building 214/215 at the North Texas Job Corps Center in McKinney, Texas. The scope of work requires the demolition and disposal of the existing Carrier 246-ton unit and the installation of a like-kind, similar model replacement. Additional technical requirements include the installation of a JACE 9000 central integration point for building automation, the installation of four 3-way control valves for air handling units, and the replacement of three out of four air handler VFDs. The contractor is also responsible for the cleaning and inspection of four air handling units, including blower motors, wheels, coils, and screens. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, a Certificate of Liability Insurance naming Serrato Corporation as the holder, and Form 1413 for Davis-Bacon Act certified payroll for work exceeding 2,000 dollars. Insurance requirements specify a minimum of 1 million dollars for Commercial General Liability and 500,000 dollars for Employers Liability. The project is designated as a small business set-aside opportunity under NAICS code 238220, with primary coordination managed by Stacy Smith and Roy Henderson. Final acceptance is contingent upon successful startup, operational testing of the chiller, and verification of air handling unit functionality.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Defense → Commanding Officer

Same awarding agency

Emergency Lighting and Siren Systems

Solicitation # M6740026Q0064

The Marine Corps Installations Pacific Regional Contracting Office is soliciting quotes for the procurement of commercial integrated emergency vehicle warning, lighting, siren, and power distribution systems to outfit a fleet of 2025 Mazda CX-60 vehicles. The requirement specifies a fully integrated, modular ecosystem controlled by a single master control panel, with equipment that must meet or exceed the salient characteristics detailed in Exhibit A, including SAE J1849 acoustic standards, California Title 13 sound levels, and a minimum IPx5 ingress protection rating. This is an unrestricted acquisition under NAICS code 423120, and the award will be made to the responsible offeror whose proposal is most advantageous to the government based on technical acceptability and price. Delivery is required within 30 calendar days after receipt of order on a FOB Destination basis, with primary shipping to Okinawa, Japan, or alternatively to DLA Distribution San Joaquin in Tracy, California. Vendors shipping to DLA Tracy must adhere to strict MIL-STD-129R marking requirements and ISPM-15 wood packaging standards. Quotes must be submitted by September 10, 2026, at 08:00 JST to the designated point of contact and must include a completed coversheet, pricing for all CLINs, a past performance sheet, and detailed technical documentation. Offerors are specifically directed to comply with FAR 52.212-1 and 52.212-2 to ensure their submissions are considered responsive.

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

in about 21 hours

Fabrication of Lifting Cap Certification Weldment

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 20 hours

26-SIMACQ-E70-0003 Lifting Cap

Solicitation # N6339426Q4070

Solicitation N6339426Q4070, issued by the Naval Surface Warfare Center Port Hueneme Division, seeks a firm-fixed-price quotation for one Lifting Cap Certification Weldment (Part Number 8902539). This item serves as a test fixture and counterweight for the Missile Exhaust Containment Structure to support the Lifting Cap Assembly Weight Test Program for the Littoral Combat Ship Surface Warfare Mission Package. The requirement includes the provision of necessary transportation fixtures or crates for delivery to Port Hueneme, California, with an estimated final delivery timeline of 60 calendar days from the date of award receipt. The procurement is a total small business set-aside under NAICS code 332710. Award will be based on the lowest price technically acceptable (LPTA) method, evaluating technical capability, past performance, and CMMC Level 1 (Self) compliance. Technical specifications require adherence to MIL-STD-130 for marking, MIL-DTL-15024 for identification plates, and specific epoxy-polyamide coating standards. Offerors must provide a verified CMMC status in the Supplier Performance Risk System and an approved DD Form 2345 to access controlled unclassified information. Following several amendments, the final response deadline is September 10, 2026.

POSTED

DEADLINE

in about 20 hours

Office Equipment and ConsumablesThis subcontract, titled Office Equipment and Consumables, provides Xerox printer hardware and compatible toner cartridges to prime contractors supporting projects at the Naval Surface Warfare Center Port Hueneme. The deliverables must adhere to standard commercial specifications and will be performed at the Port Hueneme CBC Base. Managed by the Department of Defense under the Commanding Officer, the contract is designated as a Total Small Business Set Aside under NAICS code 423420. The performance period extends from September 2, 2026, through August 31, 2031.

Office Equipment Merchant Wholesalers

POSTED

DEADLINE

in almost 5 years

Network and Electronic HardwareThis subcontract opportunity with the Department of Defense involves supplying network infrastructure and control system electronic components for prime contractors supporting Naval Surface Warfare Center Port Hueneme projects. The scope of work includes the delivery of network media converters, KVM switches, power supplies, and temperature sensors. All provided hardware must adhere to strict regulatory and technical standards, including TAA, RoHS, and FCC compliance, as well as meeting MIL-STD-810F and FIPS 140-2 Level 2 requirements. The contract is designated as a Total Small Business Set Aside under NAICS code 443112 and is managed by the Commanding Officer. Performance will take place at the Port Hueneme CBC Base in zip code 93043. The procurement period extends from September 2, 2026, through August 31, 2031.

Radio, Television, and Other Electronics Stores

POSTED

DEADLINE

in almost 5 years

Chemical and Fluid SuppliesThis subcontract, titled Chemical and Fluid Supplies, is issued by the Department of Defense for the Naval Surface Warfare Center Port Hueneme. The contractor is responsible for providing specialized chemicals and fluids, specifically HB104C and SBS 28% NR, delivered in 5 gallon carboys and 50 gallon drums. These materials are essential for control system maintenance projects performed by prime contractors at the Port Hueneme CBC Base. The contract is designated as a Total Small Business Set Aside under NAICS code 325199. All deliveries must strictly adhere to safety and shipping regulations governing hazardous and industrial chemicals. The performance period extends through August 31, 2031, with the Commanding Officer serving as the agency lead.

All Other Basic Organic Chemical Manufacturing

POSTED

DEADLINE

in almost 5 years

Non-Destructive Testing (NDT) for Ladder Fire Trucks

Testing Laboratories and Services

POSTED

DEADLINE

in about 19 hours

Third-Party Quality Inspection and FAI SupportThis subcontract for Third-Party Quality Inspection and FAI Support involves providing independent quality audits and material certification verification for prime contractors working on projects for the Naval Surface Warfare Center, Port Hueneme Division. The scope of work includes conducting First Article Inspections in accordance with SAE AS9102 Rev A and MIL-STD-109C, utilizing CMM and precision measurement instruments to deliver comprehensive FAI reports, quality audit reports, and material certification logs. The requirement is categorized under NAICS code 541380 and is managed by the Commanding Officer within the Department of Defense. Performance of these services will take place in the 93043 zip code area. The solicitation was posted on September 2, 2026, with a response deadline of October 2, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Special Tooling and Test Equipment (STE) Design & ManufactureThis subcontract for Special Tooling and Test Equipment Design and Manufacture supports the Naval Surface Warfare Center, Port Hueneme Division. The selected provider will be responsible for the engineering, design, and fabrication of custom tooling, gauges, jigs, fixtures, and test equipment for prime contractors. All work must be performed using CNC machining and precision measurement tools while strictly adhering to Technical Data Package specifications and Government quality standards. The project falls under NAICS code 333513 and is managed by the Department of Defense. Performance will take place in the 93043 zip code area. The solicitation was posted on September 2, 2026, with a response deadline of October 2, 2026.

Machine Tool (Metal Forming Types) Manufacturing

POSTED

DEADLINE

VLS Specialized Castings and Forgings SupplierThis subcontract involves the supply of high-precision castings and forgings for prime contractors supporting projects for the Naval Surface Warfare Center, Port Hueneme Division. The selected supplier will be responsible for casting and forging raw materials using high-grade alloys and industrial foundries, ensuring all products adhere strictly to Technical Data Package specifications. A critical requirement of the contract is the performance of First Article Inspection in accordance with SAE AS9102 Rev A to ensure quality and certification of all delivered materials. The opportunity is categorized under NAICS code 331110 and is managed by the Department of Defense, with performance taking place in zip code 93043.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

VLS Deck and Hatch Component FabricationThis subcontract involves the fabrication of structural components for the VLS Deck and Hatch Assembly to support prime contractors on projects for the Naval Surface Warfare Center, Port Hueneme Division. The scope of work includes the cutting, bending, and welding of ship structure components in accordance with MIL-STD-1689, utilizing certified naval welding processes and heavy-duty fabrication equipment to deliver metal components and sub-assemblies. The project is managed by the Department of Defense under the Commanding Officer, with performance taking place in zip code 93043. Compliance with ISO 9001 quality systems is required for this effort, which falls under NAICS code 332312. The response deadline for this opportunity is October 2, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Vertical Launching System (VLS) Deck and Hatch Assembly

Solicitation # N6339426R4002

The Naval Surface Warfare Center, Port Hueneme Division is soliciting proposals for the fabrication, assembly, testing, and delivery of Vertical Launching System (VLS) Deck and Hatch Assemblies for the MK 41 VLS. This effort will result in a single Firm Fixed-Price, Indefinite-Delivery, Indefinite-Quantity (IDIQ) award with a five-year ordering period. The contract has a minimum guarantee of 1,000 dollars and a maximum ceiling of 51,562,153 dollars. The scope includes the production of eight cell hatches, one uptake hatch, and a module deluge system, all requiring strict adherence to the Technical Data Package and aerospace standards such as SAE AS9102 for First Article Inspections. Deliveries are expected 54 weeks from the date of award to the Port Hueneme facility in California. The government will utilize a best-value trade-off process for the award, placing the highest importance on technical capability, specifically regarding production assembly, first article inspection, and the adequacy of physical assets and facilities. Proposals must be submitted in two separate volumes—one for pricing and one for technical non-price factors—via the PIEE Solicitation Module. Key compliance requirements include adherence to MIL-STD-129R for marking, MIL-STD-1686C for electrostatic discharge protection, and CMMC level requirements for cybersecurity. Invoicing and payment processing will be managed through the Wide Area Workflow system.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS