Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Inspection, Testing, and Quality Assurance Services

Active

Federal

Response Deadline08/31/2026, 04:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails independent inspection and testing of augmentor cases to ensure full compliance with military specifications, covering non-destructive testing, material certification, and final quality assurance verification. The work is critical to validating the integrity and performance of component parts used in defense systems, with strict adherence to standardized military protocols required throughout the process. The subcontract is issued under NAICS code 541380 and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. Interested parties must submit responses by the deadline of August 31, 2026, at 4:59 AM UTC, with the solicitation publicly posted on SAM.gov as of July 31, 2026. The contract does not specify a set-aside category or reserved status, and performance may occur at an unspecified location. While no point of contact is listed, full details and submission protocols are available through the official SAM.gov portal link provided.

General Info

Inspect and test augmentor cases per military specs for defense systems, deadline August 31, 2026, via SAM.gov.

Agency

Department Of Defense → Ok DLA Aviation At Oklahoma CityView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

OK, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 31

Submission deadline

Response Deadline

08/31/2026, 04:59:00 AM UTCin 30 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Ok DLA Aviation At Oklahoma City

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Ok DLA Aviation At Oklahoma City

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent inspection and testing of augmentor cases to ensure compliance with military specs, including NDT, material certification, and final QA verification.

Similar Contracts

Same NAICS industry code

Instrument Calibration & Performance Verification ServicesThe contract entails routine and audit-based calibration services for HACH analytical instruments to maintain regulatory compliance, with a focus on performance verification, accurate data logging, and formal certification reporting. These services are critical to ensuring the reliability and accuracy of environmental monitoring data collected by the Trinity River Authority of Texas, supporting ongoing compliance with state and federal water quality standards. The work requires certified technicians to perform scheduled calibrations as well as reactive audits triggered by compliance events or quality control anomalies, with all activities meticulously documented and reported to meet audit readiness requirements. The solicitation is classified as a subcontract under NAICS code 541380 for other scientific and technical consulting services, posted on July 31, 2026, with a response deadline of August 14, 2026. The place of performance and specific location details are not provided, indicating service may be required across multiple sites within Texas where HACH instruments are deployed. The contracting entity is the Trinity River Authority of Texas, and while no point of contact is listed, interested parties must submit proposals through the provided online portal before the stated deadline to be considered for award.

Trinity River Authority of Texas

POSTED

about 19 hours ago

DEADLINE

Product Verification Testing (PVT) SupportThe contract supports government-conducted Product Verification Testing by providing comprehensive assistance in sample preparation, documentation, and coordination with Defense Logistics Agency testing laboratories, as specified in Section E05. This subcontract is focused on ensuring that all testing procedures align with federal standards and that logistical and administrative tasks are executed accurately to facilitate timely and reliable verification outcomes. The work involves close collaboration with DLA labs to meet technical requirements and maintain traceability throughout the testing lifecycle. The solicitation is posted under NAICS code 541380 and is managed by the Land Supply Chain within the Department of Defense. The opportunity is open for responses until August 31, 2026, with no specific set-aside categories or organization type restrictions indicated. Performance locations are not explicitly defined, but the work centers around DLA testing facilities and requires active coordination with government personnel. Interested parties can access further details through the official DIBBS portal linked in the contract data.

LAND SUPPLY CHAIN

POSTED

about 21 hours ago

DEADLINE

in about 1 month

Product Verification Testing CoordinationThe contract requires the preparation, marking, and shipment of Product Verification Test (PVT) samples in full compliance with Department of Defense standards, including proper segregation of materials and complete documentation to ensure traceability and regulatory adherence. All activities must be conducted under strict guidelines to meet the DoD’s quality and procedural requirements for verification testing. The effort is classified as a subcontract under a Total Small Business Set-Aside, reserved exclusively for small businesses as defined by the Small Business Administration, and falls under the NAICS code 541380 for other scientific and technical consulting services. The solicitation was posted on July 31, 2026, with a response deadline of August 20, 2026, and is managed by the ASC Commodities Division within the Department of Defense. Performance will occur at an unspecified location, and the award is expected to follow competitive procedures under the Federal Acquisition Regulation.

ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

Quality Assurance and Compliance TestingThis contract requires third-party testing and certification of high-density polyethylene gas pipes to verify compliance with ASTM standards and applicable municipal or federal regulations governing gas distribution systems. The work must ensure that materials meet stringent performance, safety, and durability requirements necessary for reliable operation in public utility infrastructure. Testing protocols must align with recognized industry specifications and include documentation that demonstrates adherence to all technical and regulatory criteria. The contract is classified as a subcontract under NAICS code 541380 and is issued by Utilities Stores in Florida with a response deadline of September 3, 2026. The performance location is not specified, but the testing and certification services are expected to support gas distribution systems within the state. All work must be completed by an accredited and qualified laboratory or certification body capable of providing verifiable, auditable results that meet the technical and contractual obligations outlined in the solicitation.

Utilities Stores

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Inspection, Testing & Quality Assurance ServicesThe contract requires comprehensive inspection, testing, and quality assurance services for aerospace engine components, specifically focusing on first article inspection, non-destructive testing, and material verification, all executed in strict compliance with the AS9102 standard and MQR-PSD-1 requirements. These activities are critical to ensuring dimensional accuracy, material integrity, and conformance to aerospace-grade specifications, with full documentation and quality reporting mandated to support traceability and regulatory compliance throughout the production lifecycle. The work is designated as a subcontract under the NAICS code 541380, indicating specialized scientific and technical consulting services, and is issued by the Department of Defense through its Ok DLA Aviation office in Oklahoma City. The solicitation opens on July 31, 2026, with a firm deadline for responses on August 8, 2026, at 4:59 a.m. Eastern Time, allowing interested parties a limited window to submit proposals. The place of performance and contact details are not specified, suggesting the work may be performed at the vendor’s facility or designated aerospace production sites, subject to further coordination with the contracting office. The absence of a set-aside classification indicates the opportunity is open to all eligible subcontractors without preference for small businesses or other categories, emphasizing technical capability and adherence to aerospace quality standards as the primary evaluation criteria.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Color Quality Assurance and Testing ServicesThe contract seeks independent spectrophotometric testing and certification services to verify the color accuracy of HDPE board materials against the FED-STD-595C color standard, ensuring strict compliance with federal specifications. This subcontract is designated as a Small Business Set Aside under NAICS code 541380, indicating it is reserved exclusively for small businesses to perform the required precision color measurements and出具 certification documentation. The work must be conducted in accordance with approved methodologies to guarantee consistency and reproducibility in color evaluation across production batches. The opportunity was posted on July 31, 2026, with a response deadline of August 14, 2026, and the place of performance is specified as ZIP code 21502. The contracting entity is Dba Federal Prison Industries, operating under the U.S. Department of Justice, and the service is intended to support quality assurance protocols for materials used in federal applications. Although no point of contact or office address is provided, the solicitation is accessible via the SAM.gov portal, and interested small businesses must submit their proposals prior to the deadline to be considered for award.

Dba Federal Prison Industries United States Department Of Justice

POSTED

DEADLINE

Environmental Laboratory Testing – Microbiological Analysis of Water SamplesThe contract seeks a qualified small business to perform accredited microbiological testing of potable water samples, specifically analyzing for contaminants such as coliform bacteria and E. coli, in strict adherence to California Code of Regulations Title 23 and Environmental Laboratory Accreditation Program standards. The work must be conducted with precision and regulatory compliance to ensure public health and environmental safety, with all testing procedures following accepted scientific protocols for water quality assessment. The performance location is designated as zip code 96101, indicating the operational focus is centered in that geographic area. This is a subcontract classified under NAICS code 541380, designated as a Small Business Set Aside for total award, meaning only small business concerns are eligible to respond. The solicitation was posted on July 31, 2026, with a response deadline of August 14, 2026, at 11:30 PM, allowing potential bidders a brief window to submit proposals. The contracting agency is the USDA Forest Service, operating under the Department of Agriculture, and while specific point of contact details are not provided, the opportunity is accessible through the official SAM.gov portal for detailed submission requirements and documentation.

USDA Forest Service

POSTED

DEADLINE

Medicinal Chemistry Support for Therapeutic Development: Synthesis of HERV-K Protease Inhibitors

Solicitation # 75N98026Q00906

The National Institutes of Health is seeking commercial offerings for the synthesis of HERV-K protease inhibitors as part of medicinal chemistry support for therapeutic development, under solicitation number 75N98026Q00906. This is a competitive, firm-fixed-price acquisition conducted under FAR Subpart 12.6 as a streamlined solicitation for commercial items, with a projected value not exceeding $350,000. The government intends to award the contract to the offeror providing the best value based on technical capability, price, past performance, and delivery schedule. The work involves the design and synthesis of inhibitors targeting HERV-K protease, and responses must include full pricing details, delivery terms, F.O.B. point, product identifiers, and a clear timeline for completion after award. All offerors must be active in SAM.gov and provide their Unique Entity Identifier, Taxpayer Identification Number, and business size certification. The requirement is not set aside for small businesses, and the associated NAICS code is 541380. Proposals must be submitted electronically by August 10, 2026, at 9:00 AM Eastern Time to James Law at James.Law@nih.gov and must include the completed FAR 52.212-3 representations and certifications. The contract will be formed automatically upon written notice of award if submitted within the specified timeframe. Additional evaluation criteria may consider warranty, lifecycle costs, maintenance availability, and environmental efficiency. The place of performance is Bethesda, Maryland, and all terms and conditions are governed by FAR 52.212-4 and 52.212-5, incorporating applicable statutory and executive order requirements. Offerors are expected to demonstrate proven ability in medicinal chemistry, particularly in organic synthesis and protease inhibitor development, with the capability to deliver high-quality compounds on schedule.

National Institutes Of Health Olao

POSTED

DEADLINE

Whole Genome Sequencing from Rainbow Trout blood samples

Solicitation # 1232SA26Q115

This solicitation, numbered 1232SA26Q1115, is a combined synopsis and request for quotation issued under FAR Part 12 for the whole genome sequencing of rainbow trout blood samples, set aside exclusively for small businesses with a size standard of $19 million under NAICS code 541380. All responsible small businesses may submit quotations, but compliance with all submission requirements is mandatory and strictly enforced. Offerors must provide a firm fixed price quote on company letterhead, including all costs such as shipping, the place of manufacture, and a validity period of at least 60 days after submission, along with a fully completed SF-1449 form with all contract line items priced, a current Sam.gov Unique Entity ID, and a capability statement or technical documentation proving the ability to meet or exceed all specified technical requirements. Failure to submit any of these elements by the deadline will result in automatic rejection without further interaction. Quotes must be emailed by 9:00 AM CST on August 14, 2026, to Katelyn Nelson at katelyn.nelson@usda.gov, with the exact solicitation title and number as the subject line. Questions must also be directed to the same point of contact, using the correct subject line format, and must be received no later than 9:00 AM CST on August 5, 2026. The government intends to award the contract without negotiations but reserves the right to hold discussions if necessary. Performance of the work will occur in Kearneysville, West Virginia, and the awarding agency is the USDA Agricultural Research Service located in Beltsville, Maryland.

USDA Ars Afm Apd

POSTED

DEADLINE

H--TURBINE & TRANSFORMER OIL TESTING for Hoover Dam -

Solicitation # 140R3026Q0094

This solicitation seeks commercial services for turbine generator and transformer oil testing at Hoover Dam under a combined synopsis/solicitation issued as a request for quotation, exclusively for small business concerns set aside under the SBA Total Small Business Set-Aside program, with a NAICS code of 541380 and a size standard of $19 million. The Government intends to award a single Blanket Purchase Agreement with a five-year performance period running from October 1, 2026, through September 30, 2031, though it reserves the right to award one, multiple, or no agreements based on responses. All required details regarding services, pricing, and terms are outlined in attachments including the Statement of Work, Price Schedule, and Solicitation Provisions and Contract Clauses, with estimated maximum quantities provided in the pricing schedule. Offerors must submit quotations by July 31, 2026, at 4:00 PM PDT via email to Jennalyn Kent, and all inquiries must be submitted no later than July 22, 2026. The contract is managed by the Department of the Interior’s Lower Colorado Regional Office in Boulder City, Nevada, and is open to all responsible small business sources meeting the requirements.

Lower Colorado Regional Office

POSTED

DEADLINE

IsotopeAnalysis0001

Solicitation # IsotopeAnalysis0001

The contract solicitation IsotopeAnalysis0001 seeks support services for stable isotope analysis under the NAICS code 541380, issued by the Washington Headquarters Services within the Department of Defense. The opportunity was posted on July 31, 2026, and responses are due by August 7, 2026, at 1:00 PM Eastern Time. Performance will be conducted in Washington D.C., with the primary point of contact being Leanne Condren, reachable at leanne.m.condren.civ@mail.mil, and Rodrick Chandler II as the secondary contact. The office is located at 203011000 in Washington, DC, and the solicitation is classified as a special notice with no set-aside provisions indicated. Interested parties must submit proposals through the SAM.gov portal using the provided UI link.

Washington Headquarters Services

POSTED

DEADLINE

Investigating Aftermarket Technologies to Improve Locomotive Efficiency

Solicitation # 693JJ626Q000025

The Federal Railroad Administration (FRA) is seeking commercial research and development services to investigate the efficacy of aftermarket technologies—such as fuel additives and injector kits—in improving locomotive efficiency for Class II and III railroads. The effort, conducted under a firm-fixed-price purchase order with an estimated value of $350,000, is governed by the Revolutionary Federal Acquisition Regulation Overhaul and structured as a combined synopsis/solicitation. The work requires a comprehensive technical assessment, including a review of existing research, identification of knowledge gaps, and laboratory and field testing on government-furnished locomotives operating in real-world revenue service conditions, including extreme temperatures and humidity. The project must be minimally invasive and adhere to industry standards such as those from AAR, FRA, and ASTM, while ensuring Section 508 compliance and alignment with FRA technical report templates. Deliverables include a Technology Search Summary Report, a List of Technologies to be Procured, Draft and Final Test Plans, Quarterly Progress Reports, a Project Management Plan, a Presentation of Test Results, and a Final Technical Report, all submitted according to specified templates and schedules over an 18-month performance period from September 1, 2026, to March 1, 2028. The evaluation process prioritizes non-price factors significantly over price, with award based on a best-value tradeoff rather than lowest price technically acceptable. Offerors will be assessed on Prior Experience, Technical and Management Approach, and Price Quotation using adjectival confidence ratings—High, Some, or Low—for the first two factors, with price serving as a tiebreaker when technical ratings are closely matched. Submissions must be structured in three electronic volumes: Cover Letter and Prior Experience (max 2 pages), Technical and Management Approach (max 3 pages in PDF with specific font requirements), and Price Quotation using the official Pricing Worksheet. Responses are due by August 21, 2026, and must be emailed exclusively to the Contracting Officer; fax, physical media, or unconverted scanned documents are not accepted. The contract includes several unique requirements: all personnel must be U.S. citizens or lawful permanent residents, and may require national security clearances (Confidential to Top Secret), background investigations, and DOT ID card compliance. Contractors must also comply with NIST SP 800-171 Rev. 2 for Controlled Unclassified Information, implement FedRAMP Moderate baseline for cloud services, report cyber incidents within 72

693JJ6 Federal Railroad Administration

POSTED

DEADLINE

More opportunities from Department Of Defense → Ok DLA Aviation At Oklahoma City

Same awarding agency

Packaging, Preservation & Shipping ServicesThe contract requires the provision of military-compliant packaging, preservation, and shipping preparation services for a turbine nozzle to ensure its structural and functional integrity during extended storage and transit. All procedures must adhere to standardized military specifications to safeguard the component from environmental degradation, corrosion, and physical damage, with particular emphasis on traceability through the use of National Stock Number and Part Number identifiers. The work must be executed in a manner that supports full accountability throughout the supply chain and meets all defense logistics requirements for readiness and compliance. The solicitation is classified as a subcontract under NAICS code 488999 and is issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The opportunity was posted on July 31, 2026, with a deadline for responses set for August 8, 2026, at 4:59 a.m. There is no set-aside designation specified, and the place of performance and point of contact details are not provided. All work must be completed in alignment with defense logistics protocols to ensure seamless integration into military supply and storage systems.

All Other Support Activities for Transportation

POSTED

DEADLINE

Technical Data & Engineering Support ServicesThe contract seeks technical data and engineering support services focused on the turbine nozzle, requiring the acquisition, interpretation, and application of detailed technical information to support development and reverse engineering efforts. Key deliverables include the creation of engineering documentation for digital layout (EDL), alignment with the MQR-PSD-1 specification, and strict adherence to applicable military documentation standards to ensure compliance and interoperability with existing defense systems. This work demands a high level of technical expertise in aerospace components and familiarity with military-grade engineering protocols. The opportunity is structured as a subcontract under NAICS code 541330, targeting engineering services in the defense sector, with a solicitation posted on July 31, 2026, and a response deadline of August 8, 2026. The contracting agency is the Department of Defense, specifically Ok DLA Aviation at Oklahoma City, though no detailed point of contact or place of performance is provided. Subcontractors must be prepared to work within the constraints of federal defense standards and deliver precise, auditable technical outputs that support the broader sustainment and modernization goals of military turbine systems.

Engineering Services

POSTED

DEADLINE

Precision Aerospace Manufacturing of Turbine Nozzle AssemblyThe contract entails the end-to-end manufacturing of the F110 engine turbine nozzle assembly, covering all stages from material procurement through machining, heat treatment, final assembly, rigorous inspection, and secure delivery, all in strict adherence to military specifications. Each phase must meet exacting quality and performance standards to ensure operational reliability in defense aerospace applications. The work is classified as a subcontract under NAICS code 336412, indicating specialized aerospace component manufacturing, and is being managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The solicitation was posted on July 31, 2026, with a firm response deadline of August 8, 2026, at 4:59 AM. Although no specific set-aside designation is provided, the nature of the work and the agency involvement suggest it is targeted toward experienced defense contractors capable of handling classified or sensitive military hardware. The place of performance is not explicitly defined, implying flexibility in location as long as deliverables comply with all technical and regulatory requirements. Successful bidders will be expected to demonstrate proven capability in high-precision turbine component production and full compliance with defense manufacturing protocols.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

Packaging, Preservation, and Shipping of Sensitive Aerospace ComponentsThe contract requires strict adherence to military preservation, packaging, and shipping standards, specifically MIL-STD-2073, for the augmentor case, a sensitive aerospace component. This ensures the component maintains its integrity during long-term storage and transit under demanding environmental conditions, with all handling procedures aligned to Defense Logistics Agency protocols. The work involves specialized materials, processes, and documentation to meet federal defense requirements for contamination control, moisture barrier integrity, and secure transport logistics. The opportunity is designated as a subcontract under NAICS code 493190 and is managed by the Department of Defense through Ok DLA Aviation at Oklahoma City. The solicitation was posted on July 31, 2026, with a response deadline of August 31, 2026, at 4:59 a.m. The place of performance and exact delivery location are not specified, but compliance with all DoD shipping and preservation criteria is mandatory regardless of final destination. Contractors must possess the capability to execute certified military-grade packaging procedures and provide verifiable documentation to demonstrate compliance.

Other Warehousing and Storage

POSTED

DEADLINE

Source Approval Request (SAR) Package DevelopmentThe contract entails the development and submission of a complete Source Approval Request package to secure government qualification, requiring comprehensive documentation including Material Quality Requirements, detailed test results, and verifiable compliance evidence to meet regulatory standards. The work is classified as a subcontract under NAICS code 541690, and the effort is directed toward the Department of Defense through the Ok DLA Aviation office in Oklahoma City, with all deliverables expected to align with federal qualification protocols. Responses must be submitted by August 31, 2026, at 4:59 a.m., following a posting date of July 31, 2026. There is no set-aside designation specified, and the place of performance and point of contact details are not provided. The contract remains accessible via the SAM.gov platform for interested parties seeking to participate in meeting the technical and compliance demands necessary for government source approval.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Technical Data Acquisition and Engineering SupportThe contract titled Technical Data Acquisition and Engineering Support encompasses the comprehensive collection, validation, and reconstruction of critical technical data including engineering drawings and equipment data lists essential for manufacturing operations. It requires detailed reverse engineering efforts to recover and replicate legacy or undocumented components, along with thorough documentation to support source approval processes. This work is vital for maintaining supply chain integrity and ensuring continued production capability, particularly for military and defense-related hardware where original documentation may be incomplete or unavailable. The solicitation is structured as a subcontract under NAICS code 541330, which aligns with engineering services, and is managed by the Department of Defense through the Ok DLA Aviation office in Oklahoma City. The opportunity was posted on July 31, 2026, with a firm response deadline of August 31, 2026, at 4:59 a.m. The place of performance and specific contact details are not provided, indicating that the work may be performed remotely or at multiple locations as needed by the prime contractor. All deliverables must meet precise technical standards to enable accurate reproduction and qualification of components within the existing manufacturing and logistics framework.

Engineering Services

POSTED

DEADLINE

New Manufacture of Aircraft Augmentor Case (NSN: 2840012459464OK)The contract entails the full lifecycle manufacturing of a new aircraft augmentor case identified by NSN 2840012459464OK, requiring end-to-end production from material sourcing through final shipment. All phases—including fabrication, inspection, testing, preservation, packaging, and shipping—must strictly adhere to military specifications and DMS mitigation protocols to ensure component integrity and supply chain reliability. The work is classified as a subcontract under NAICS code 336412, targeting specialized aerospace manufacturing capabilities, with performance expected to meet the rigorous quality and compliance standards set by the Department of Defense. The solicitation was posted on July 31, 2026, with responses due by August 31, 2026, and is administered by the Defense Logistics Agency Aviation at Oklahoma City. While the exact location of performance is unspecified, the contract requires delivery in compliance with DOD logistics frameworks. There is no set-aside designation, making this opportunity available to all qualified subcontractors regardless of business size or status. The absence of a designated point of contact implies that all inquiries must be directed through the official SAM.gov portal linked in the posting.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

New Manufacture Material: NSN: 2915-01-462-6011 PR (3R)

Solicitation # SPRTA1-26-R-0337

The solicitation seeks the procurement of 51 units of the FUEL CONTROL,AFTERB, identified by NSN 2915-01-462-6011 PR and part number 1459M17G06, for use on the F110 engine. This component is critical for augmented engine operation, as it receives fuel from the augmentor fuel pump and distributes it to the local, core, and fan fuel manifolds. The action is directed by the Department of Defense through DLA Aviation at Tinker AFB, Oklahoma, under RFP number SPRTA1-26-R-0337, with a proposed issuance date of July 29, 2026, and a response deadline of August 28, 2026. Delivery is required by May 31, 2027, to shipment location SW3211. The government intends to award this contract on a sole-source basis under FAR 6.302, as GE Aviation is currently the only known source capable of meeting the technical requirements, though the decision to compete remains at the government's discretion. Although the acquisition does not fall under commercial item procedures in FAR Part 12, suppliers may still submit commercial item alternatives within 15 days of the notice. Electronic submission is mandatory, with no telephone inquiries permitted. An Ombudsman is available to address contractor concerns confidentially but does not engage in evaluation or selection. All inquiries must be directed to Breann Irving via email or fax, and the solicitation will be accessible on SAM.gov on the release date.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in about 1 month

Bushing , Sleeve _End_Item_B2_NSN_3120014250619FW_PN_04A082-05B019A

Solicitation # FD20302602395

The U.S. Air Force, through the 424th Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify qualified sources for the new manufacture of a bushing and sleeve component with National Stock Number 3120-01-425-0619FW and part number 04A082-05B019A, intended for use on the B-2 platform. This sources sought notice is not a solicitation or binding commitment to award a contract; no funds are currently available, and no contract award is planned based on responses. The government seeks information from potential suppliers—including small businesses, small disadvantaged businesses, 8(a) firms, service-disabled veteran-owned small businesses, HUBZone businesses, and women-owned small businesses—to assess market capability and determine whether the requirement can be competitively sourced or set aside. The requirement calls for the full manufacture of the part, encompassing component procurement, inspection, testing, packaging, shipping, supply chain management, logistics planning, and mitigation of diminishing manufacturing sources and material shortages. Potential vendors must also be prepared to assume nonrecurring engineering costs to qualify as an approved source. Response information must include business details such as company name, CAGE code, UEI, NAICS classification, size status, ownership type, and certifications. All responses must be submitted by August 8, 2026. Technical data, including Manufacturing Qualification Requirements and Engineering Data Lists, are available through official channels; engineering drawings must be requested via a standardized form and sent to the designated Tinker Engineering Public Sales Desk. Source approval packages must be submitted electronically through DoD SAFE, and inquiries regarding the SAR process should be directed to the AFSC Small Business Office. The estimated spares requirement is two units, and the North American Industry Classification System code is 336413 with a size standard of 1,250 employees. All communications regarding this notice must be directed to the provided email address, and no direct contact with the originating office is permitted.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

SPRTA1-26-R-0357 (NSN:4710003957077 NZ)

Solicitation # SPRTA126R0357

The contract solicitation SPRTA1-26-R-0357 seeks the procurement of a right anti-icing manifold tube assembly, identified by part number 4040924A and national stock number 4710003957077NZ, designed to channel air from the 13th stage compressor case through hollow leading edge vanes on the Engine TF-100. The item is to be manufactured from TI alloy, with a base quantity requirement of 22 units and a flexible procurement range allowing a minimum of 5, a median of 22, and a maximum of 33 units. Only qualified sources, currently listing Raytheon Tech Corp as an approved supplier, are eligible, and all responsible parties may respond, provided they meet strict qualification requirements outlined in FAR Clause 52.209-1 or 52.209-2, which must be satisfied at the time of award. The acquisition does not fall under FAR Part 12 for commercial items, though offerors have 15 days from the notice to propose commercial alternatives if capable of meeting the requirement. Electronic submission via Sam.gov is mandatory, with no telephone requests permitted; only written or faxed inquiries are accepted, and the full solicitation will be available for download on its release date. Export control regulations apply to this transaction, and it is subject to Free Trade Agreements. An ombudsman has been designated to receive and relay confidential concerns from offerors during the proposal phase, ensuring open communication without influencing evaluation or source selection. The estimated issue date is June 29, 2026, and proposals must be submitted by the closing date of July 14, 2026. The procurement is managed by the Department of Defense through DLA Aviation at Tinker AFB, Oklahoma, with point of contact available for technical and procedural inquiries. No set-aside provisions are in effect, and while detailed evaluation factors or delivery terms are not yet published, qualification and compliance remain paramount for award consideration.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

in about 1 month

SEAL,METALLIC,AIRCR _End_Item_F110_NSN_2840013087046PR_PN_1441M38G06

Solicitation # FD20302700157

The United States Air Force, through the 421st Supply Chain Management Squadron at Tinker Air Force Base, Oklahoma, is conducting market research to identify potential sources for the new manufacture of a metallic aircraft seal with part number 1441M38G06 and NSN 2840013087046PR, intended for use on the F110 platform. This effort, identified by Notice ID FD20302700157, is a Sources Sought Synopsis issued under FAR Part 10 solely for planning purposes and does not constitute a solicitation or binding commitment. The Government seeks to determine if the requirement can be fulfilled through competitive acquisition or a small business set-aside, emphasizing interest in all categories of small businesses including small disadvantaged, 8(a), service-disabled veteran-owned, HUBZone, and women-owned firms. The estimated requirement spans June 2026 to June 2027, with potential sources expected to have the capability to manufacture the item from raw components through final inspection, testing, packaging, and delivery, while also addressing supply chain challenges such as diminishing manufacturing sources and long-lead procurement. Technical qualification requires submission of a Source Approval Request (SAR) package through DoD SAFE, with qualification requirements referenced via MQR-PSD-1 and an accompanying Engineering Data List, though no drawings are guaranteed from the Government. Vendors must complete a standardized form to request any available engineering drawings through the Tinker Engineering Public Sales Desk and provide detailed business information including CAGE code, UEI, NAICS classification, and small business certifications. Responses must be submitted by August 31, 2026, and are strictly limited to written submissions via email; no oral responses or inquiries to the originating office are permitted. No funds are available for this market research phase, and any future contract award will be based on a separate solicitation to be issued after analysis of responses received.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE