This Government Contract opportunity from Department Of Defense was posted on August 31, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

ISO 17025 Accredited Calibration and Preventive Maintenance of Laboratory Balances

Closed

Federal

Submission Closed09/08/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811210

New

SLED

Two-way Radio Install, Removal and Repair Fort Worth District

Solicitation # 601310000101508

The Texas Department of Transportation is seeking a contractor under solicitation number 601310000101508 to provide installation, removal, maintenance, and repair services for two-way radio equipment within the Fort Worth District. This SLED organization contract requires the selected vendor to manage the full lifecycle of radio equipment hardware to ensure operational readiness in the state of Texas. Interested respondents must register and submit their proposals through the Euna Procurement portal. The solicitation was posted on November 4, 2026, with a strict response deadline of November 19, 2026, at 9:00 PM. All inquiries and coordination regarding this procurement should be directed to the primary point of contact, Tashauna Butler, via email at [email hidden] or by phone at [phone hidden].

Texas Department of Transportation

POSTED

DEADLINE

Invitation for Bid (IFB) 26-10300 BSL3 Laboratory Maintenance

Solicitation # 26-10300

The California Department of Public Health is seeking a qualified contractor for Invitation for Bid 26-10300 to provide comprehensive maintenance for Biosafety Level 3 (BSL-3) laboratory systems at 850 Marina Bay Parkway in Richmond, California. The scope of work includes scheduled inspections, testing, certification, preventive maintenance, filter replacement, annual performance verification, semiannual room decontamination, and corrective-action support. The contract period runs from December 16, 2026, through December 15, 2028, with a maximum allocated value of 149,999.99 dollars. Award will be granted to the lowest responsive responsible bidder, provided they meet strict minimum qualifications, including five years of BSL-3 facility experience and the successful completion of at least three comparable annual performance verification projects within the last five years. To be deemed responsive, bidders must ensure a minimum of 3 percent Disabled Veteran Business Enterprise (DVBE) participation, with higher participation levels offering price reduction incentives during evaluation. Required deliverables include detailed service reports, executive summaries of system status, and written deficiency logs, all of which must comply with ANSI, NSF, CDC/NIH, and IEST standards. Contractors must maintain significant insurance coverages, including general liability, professional liability, and environmental/pollution liability of at least 1 million dollars each. Bids are due by December 1, 2026, and must include a technical response not exceeding ten pages, a completed cost worksheet, and various administrative certifications and business licenses.

California Department of Public Health

POSTED

DEADLINE

Calibration of Scales and balances

Solicitation # 060-3104704-NB

Solicitation 060-3104704-NB is an Invitation for Bid issued by the County of Orange Sheriff-Coroner for a firm fixed fee contract to provide maintenance and calibration services for balances, weights, and breath alcohol thermometers. The primary objective is to ensure the accuracy and precision of analytical results at the County's Crime Lab to maintain compliance with ANAB accreditation standards. The scope of work includes annual preventative maintenance, cleaning, and calibration of equipment, with a requirement that all services be traceable to the International System of Units (SI). The contractor must be accredited to ISO/IEC 17025:2017 by a signatory of the IAAC or ILAC Mutual Recognition Arrangements and must provide corresponding calibration certificates. The contract will be awarded to the lowest responsive and responsible bidder, with a five percent price deduction applied for evaluation purposes to certified OCLSB or DVBE bidders, capped at 100,000 dollars. Bidders must submit their responses via the County's eProcurement portal, including a Non-Collusion Declaration and Certification Regarding Debarment. Required legal documentation includes a valid UEI number, D-U-N-S number, and an active certificate from the California Secretary of State. The agreement incorporates strict compliance with the John S. McCain National Defense Authorization Act Section 889, the Davis-Bacon Act, and various civil rights and safety standards. Payment terms are net thirty days following the receipt of an approved invoice.

POSTED

DEADLINE

Site Inspection & MaintenanceThis subcontract for the City of Hamilton involves providing recurring monthly inspections and maintenance for flow monitoring equipment used by prime contractors. The selected provider will be responsible for conducting regular site visits to verify equipment functionality and performing necessary repairs or adjustments utilizing specialized sensor accuracy testing equipment. As part of the deliverables, the contractor must provide detailed monthly site inspection reports and comprehensive maintenance logs. This opportunity is categorized under NAICS code 811210, with a response deadline set for December 3, 2026. Performance of the contract will take place within Canada.

POSTED

DEADLINE

Copier and Multifunction Printer (MFP) MaintenanceThis subcontract for Copier and Multifunction Printer (MFP) Maintenance involves providing preventative and corrective maintenance for copying and printing equipment supporting prime contractors on Alabama Liquified Petroleum Gas Board projects. The scope of work includes conducting routine inspections, performing on-site hardware repairs, and replacing worn components according to manufacturer specifications to ensure all equipment remains fully operational. Qualified providers must hold manufacturer certification for specific equipment models and maintain active E-Verify enrollment. Key deliverables include the restoration of equipment functionality and the provision of detailed maintenance logs. The opportunity is categorized under NAICS code 811210 and was posted on November 4, 2026, with a response deadline of November 9, 2026.

LIQUIFIED PETROLEUM GAS BOARD

POSTED

DEADLINE

CCTV Systems Preventative and Corrective MaintenanceThis subcontract for CCTV Systems Preventative and Corrective Maintenance involves providing ongoing technical support and maintenance for CCTV systems at Conwy County Borough Council leisure facility projects. The scope of work includes conducting routine inspections, performing hardware repairs, and implementing software updates to maintain ARC connectivity and ensure consistent evidential recording capabilities. The contractor will utilize diagnostic tools for network troubleshooting and is required to deliver system uptime and maintenance reports over a three year period. The opportunity is managed by the Conwy County Borough Council under NAICS code 811210. Interested parties must submit their responses by the deadline of November 26, 2026, at 12:00 PM. This contract focuses on ensuring the long-term operational reliability of security infrastructure through a combination of preventative care and corrective technical interventions.

Conwy County Borough Council

POSTED

DEADLINE

Replacement of Submersible Level Transducers

Solicitation # 27-0428-0508

The City of Newport News Public Works department is soliciting quotes for the procurement, installation, configuration, calibration, and testing of three replacement submersible level transducers at its closed landfill located at 530 Atkinson Blvd, Newport News, Virginia. The project aims to restore reliable liquid level data for regulatory documentation and operational decisions, as existing instruments have reached the end of their service life. The required equipment is the Dwyer/Mercoid Model SBLTX-5-470 or an approved equal, featuring a 0 to 5 psi pressure range, 470-foot integral shielded and vented cable, 4 to 20 mA DC two-wire output, 10 to 28 VDC power, and a 316/316L stainless-steel body. The selected contractor must complete the project within 60 calendar days of the purchase order, with field work performed during normal City business hours, Monday through Saturday. The scope includes removing existing units without damaging City equipment and verifying the full signal path to ensure stable and reasonable readings at the receiving equipment. Award will be made to the lowest responsive and responsible bidder based on factors including experience, financial resources, and the ability to perform within the specified timeframe. Bids must be submitted via the OpenGov Procurement portal by the deadline, and the resulting contract will be formalized through a Purchase Order with default payment terms of Net 30 Days.

POSTED

DEADLINE

Maintenance and Repair Services for QuantStudio 12K Flex SystemThis subcontract opportunity with the Department of Veterans Affairs involves providing specialized maintenance and repair services for the QuantStudio 12K Flex system. The scope of work includes performing corrective maintenance, scheduled preventive inspections, and technical repairs, as well as conducting remote diagnostics and installing approved software and firmware updates. The goal is to ensure the delivery of a fully operational system supported by detailed written service reports. Qualified providers must utilize calibrated test equipment and employ technicians specifically trained on the QuantStudio 12K Flex system. This requirement falls under NAICS code 811210 and is managed by Network Contract Office 16. Interested parties must submit their responses by November 19, 2026.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

3D Scanner Installation and Calibration ServicesThis small business set-aside subcontract involves providing 3D scanner installation and calibration services for the Department of Defense at Robins Air Force Base in Warner Robins, Georgia. The scope of work includes the physical setup, installation, and precision calibration of 3D scanning systems for prime contractors supporting Maintenance Contracting Afsc Pzim projects. The contractor is responsible for utilizing precision calibration targets and tools specifically for the Accu+ Kit to guarantee measurement accuracy. Final deliverables include a fully operational and calibrated system accompanied by formal certification and Calibration Certificates that comply with ISO/IEC 17025 standards.

FA8571 Maintenance Contracting Afsc Pzim

POSTED

DEADLINE

Omnicell IVX Technical Maintenance & SupportThis subcontract opportunity involves providing technical maintenance and hardware and software support for Omnicell IVX workflow devices on Department of Veterans Affairs medical equipment projects. The scope of work includes executing preventative and corrective maintenance, troubleshooting, and repairs to ensure devices remain operational. All services must be performed in strict adherence to Life Safety Code and The Joint Commission standards, with the final delivery consisting of operational equipment and detailed maintenance logs. The project is managed by the Department of Veterans Affairs Network Contract Office 16 and will be performed in Little Rock, Arkansas. Qualified technicians must have completed a formalized Omnicell IVX training program to be eligible. Interested parties should note the response deadline of November 11, 2026, for this effort categorized under NAICS code 811210.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Biomedical Equipment Maintenance & ServiceThis subcontract for Biomedical Equipment Maintenance and Service supports prime contractors on Department of Veterans Affairs VISN 19 projects. The scope of work involves performing annual preventative maintenance and on-call corrective repairs for OC-Auto Sensor iO analyzers, with a specific requirement for 24/7 high-availability service dedicated to the Eastern Colorado VA Health Care System. To ensure technical compliance, all services must be performed by manufacturer-certified technicians or those holding a CBET certification. The selected provider is responsible for delivering detailed equipment uptime and maintenance reports to the Network Contract Office 19. This opportunity falls under NAICS code 811210 and requires responses by November 20, 2026.

Network Contract Office 19 (36C259)

POSTED

DEADLINE

WMS-5 Calibration and Technical Support ServicesThe WMS-5 Calibration and Technical Support Services subcontract involves providing specialized maintenance, calibration, and technical assistance for WMS-5 instruments used by prime contractors on Department of Veterans Affairs projects. The scope of work includes the periodic calibration of electrical signals and the execution of technical troubleshooting and repairs utilizing diagnostic tools and calibration laboratory equipment. To ensure quality and compliance, the service provider must maintain ISO/IEC 17025 accreditation and is responsible for delivering all necessary calibration certificates and maintenance reports. This opportunity is managed by the Department of Veterans Affairs Network Contract Office 8 and is categorized under NAICS code 811210. The place of performance is located in Orlando, Florida. Interested parties should note the posting date of November 4, 2026, with a response deadline set for November 12, 2026.

248-NETWORK Contract Office 8 (36C248)

POSTED

about 23 hours ago

DEADLINE

in 7 days

AI Contract Overview

This subcontract opportunity is for the provision of on-site preventive maintenance and accredited calibration of laboratory balances supporting prime contractors on PSNS and IMF projects in Bremerton. The selected provider must hold ISO 17025:2017 accreditation to perform measurements of eccentricity, repeatability, and error of indication, ensuring devices meet manufacturer specifications using OIML E2 or ASTM Class 2 masses in accordance with EURAMET cg-18 and ISO 17025:2017 standards. Deliverables include physical labels and accredited calibration certificates. The project falls under NAICS code 811210 and is designated as a total Small Business Set Aside. Managed by the Department of Defense for the Puget Sound Naval Shipyard IMF, the response deadline for this requirement is September 8, 2026.

General Info

ISO 17025 accredited balance calibration and maintenance for PSNS and IMF in Bremerton.

Agency

Department Of Defense → Puget Sound Naval Shipyard IMF

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

Bremerton, WA, USA

Set-Aside

SBA

Documents

This scope was carved out of N4523A26R1305.

The full solicitation package (5 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CALIBRATION AND MAINTENANCE SERVICE BALANCES AND WEIGHING DEVICES

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedAug 31

subcontract

Response DeadlineSep 8

Deadline has passed

Submission Closed

09/08/2026, 04:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Puget Sound Naval Shipyard IMF

Office AddressN/A

ContactsNo contact information available

Full Description

Performs on-site preventive maintenance and accredited calibration for laboratory balances for prime contractors on PSNS & IMF projects. Calibrates devices to manufacturer specifications using OIML E2 or ASTM Class 2 masses per EURAMET cg-18 and ISO 17025:2017 standards. Measures eccentricity, repeatability, and error of indication. Requires ISO 17025:2017 accreditation. Delivers accredited calibration certificates and physical labels.