Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

J -- CONSERVE CONTROL UNIT

Active
HSCG40-05-R-50039Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The U.S. Coast Guard Engineering Logistic Center plans to issue a solicitation for a contract involving the receipt, disassembly, inspection, and overhaul of Conserve Control Units used on the main propulsion engine control systems of the 110-foot WPB Class Cutters. These units, manufactured by Regulators Europa, Ltd., must be serviced according to Coast Guard and OEM standards using only original equipment manufacturer (OEM) parts. The solicitation will establish a requirements contract covering one base year with four one-year option periods. The contract will be awarded on a sole-source basis exclusively to Regulators Europa or its authorized facilities or distributors. Deliveries will be made F.O.B. Destination to the Coast Guard’s Engineering Logistic Center in Baltimore, Maryland. The estimated quantities for each year will be included in the solicitation, which is expected to be available around mid-September 2005. Interested parties must monitor the FedBizOpps website starting on that date to access the solicitation package. The work must adhere strictly to the Coast Guard Standard Overhaul Specification and OEM guidelines, ensuring that only genuine OEM parts from Regulators Europa are used. This sole-source approach reflects the specialized nature of the equipment and the requirement for quality and consistency in overhaul services.

General Info

Sole-source contract for overhaul of Regulators Europa Conserve Control Units using OEM parts.

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

MD

Set-Aside

NONE

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhasePresolicitation
Posted

Presolicitation

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Sflc Procurement Branch 3(00040)
ContactsNo contacts available
OfficeBALTIMORE, MD, 21226, USA
Office AddressBALTIMORE, MD, 21226, USA
ContactsNo contact information available

Full Description

Show more
The U.S. Coast Guard Engineering Logistic Center intends to issue a solicitation for the receipt, disassembly, inspection and overhaul of Conserve Control Units, NSN 5310-99-776-6898, manufactured by Regulators Europa, Ltd., P/N's LIST GS17-100A & 84-0A-178-P03, which are used onboard the main propulsion engine control systems on the U.S. Coast Guard (USCG) 110 WPB Class Cutters.The Government anticipates awarding a requirements contract for one base year and four (4) one (1) year options. Estimated quantities for each year will be shown in the solicitation. F.O.B. Destination to the U.S. Coast Guard Engineering Logistic Center, Receiving Room, Bldg. 88, 2401 Hawkins Point Rd., Baltimore, MD 21226-5000. This acquisition will be sole source for the overhaul to OEM Regulators Europa or its authorized facilities/distributors only. The work shall be performed in accordance with Coast Guard Standard Overhaul Specification and Regulator Europa specifications, standards and recommended procedures using OEM parts only. All parts to be furnished and used with the overhaul shall be (OEM) Regulators Europa parts only. The Coast Guard will handle this procurement as a sole source with Regulators Europa or its authorized facilities/distributors. Any sources interested in receiving the solicitation will be able to download the solicitation package on or about 16 September 2005. This date is estimated at best. Interested sources should review FedBizOpps (at www.eps.gov) daily beginning September 16, 2005 for availability of the solicitation. See number notes 22 and 26.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management & Training Corporation (MTC) is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and new manufacturer-specified parts required to diagnose and repair the clutch assembly and power take-off (PTO) system. The scope of work includes disassembling the tractor, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing necessary hydraulic pipes and filters. Final acceptance is contingent upon the Facility Maintenance Department verifying proper clutch engagement and PTO operation under load. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Interested bidders must submit a bid sheet, a completed supplier packet including IRS Form W-9 and self-certification, and proof of insurance to Angie Mahoney by November 3, 2026, at 3:00 PM CST. Award will be based on best value. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination No. 2015-4687 Revision 31 for Kentucky, and FAR clauses regarding equal opportunity, combating trafficking in persons, and restrictions on foreign purchases.
Earle C. Clements Job Corps Center

POSTED

about 4 hours ago

DEADLINE

in 6 days
View Details
NAICS: 811310
New
SLED
IFB 26C091005 - Hangar Door Hydraulic System Upgrade Services - CHP Academy Special Weapons and Tactics (SWAT)
Solicitation # 26C091005
The Department of the California Highway Patrol (CHP) is soliciting bids for Invitation for Bids (IFB) 26C091005 to perform a complete hydraulic system upgrade for two hangar doors at the CHP Academy SWAT facility in West Sacramento, California. The scope of work requires the contractor to provide all labor, materials, and equipment, including the installation of hydraulic power units, heavy-duty cylinders, rebuild kits, high-pressure hoses, and climate-appropriate fluid. The anticipated period of performance is from January 1, 2027, to June 30, 2027. A mandatory site walk-through was scheduled for November 9, 2026, and the final response deadline is November 23, 2026. The contract will be awarded to the lowest responsive and responsible bidder. A critical requirement is a minimum of 5% Disabled Veteran Business Enterprise (DVBE) participation, though incentives are available for higher participation levels. Bidders must comply with California prevailing wage laws, the Americans with Disabilities Act, and various safety and building codes. Depending on the final contract value, performance and payment bonds may be required for amounts exceeding 10,000 and 25,000 dollars, respectively. Submission requires a physical bid package containing specific certifications, including the Bidder Declaration, Non-Collusion Affidavit, and California Civil Rights Certification.
Department of the California Highway Patrol

POSTED

about 8 hours ago

DEADLINE

in 26 days
View Details

More opportunities from Department Of Homeland Security → Sflc Procurement Branch 3(00040)

Same awarding agency

Earlier notices in this NAICS code

Posted before this notice, open and closed

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS