Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Solicitation opportunity from Department Of The Interior was posted on April 21, 2023. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

J--EXISTING WALK-IN REFRIGERATOR CONVERSION TO WALK-I

Awarded
140G0223Q0091Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.
Washington Metropolitan Area Transit Authority

POSTED

about 2 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 2 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
ANNUAL ROTATING EQUIPMENT INSPECTION, TESTING, REPAIR, RECONDITIONING AND STORAGE SERVICES
Solicitation # 2026-RFP-130
Solicitation 2026-RFP-130, issued by the City of Lakeland, seeks qualified contractors to provide annual inspection, testing, repair, reconditioning, and storage services for critical rotating equipment at the McIntosh and Larsen Power Plants. The scope of work covers a wide range of industrial machinery, including low- and medium-voltage AC and DC electric motors, as well as circulating water and condensate pumps. Required services include clean inspect test (CIT) procedures, troubleshooting, motor rewinding, machining, welding, and dynamic field balancing. The contractor is also responsible for the pickup, transportation, and secure indoor storage of equipment, ensuring strict preservation measures such as periodic shaft rotation and moisture control to prevent corrosion and damage. The selection process is based on a points-based criteria to identify the vendor most responsive to the city's needs. Proposers must submit their responses via the OpenGov portal by October 30, 2026, and provide essential documentation including a signed W-9, Sunbiz registration, a notarized indemnification agreement, and a human trafficking affidavit. Contractors must adhere to strict safety standards, including OSHA compliance and specific certification for crane operations and critical lifts. Furthermore, vendors are required to maintain insurance policies with AM Best ratings of no less than A and must undergo a safety audit covering EMR and employee training records to ensure compliance with city risk management standards.
LE - Production - MPP

POSTED

about 5 hours ago

DEADLINE

in 8 days
NAICS: 811310
New
International
Fuel Dispenser Technical Installation & RepairThis subcontract for Fuel Dispenser Technical Installation and Repair involves the physical replacement and calibration of damaged parts within Tatsuno dispensing units for prime contractors working on Pakistan State Oil Company Ltd projects in Pakistan. The scope of work includes removing damaged components, installing new parts, testing for leaks, and utilizing specialized calibration equipment and fuel-safe tools to ensure accurate fuel measurement and fully operational units. To qualify for this engagement, providers must hold technical certification for Tatsuno equipment and adhere to ATEX/IECEx hazardous area safety standards. The opportunity was posted on October 29, 2026, with a response deadline of November 4, 2026, falling under NAICS code 811310.
Pakistan State Oil Company Ltd

POSTED

about 8 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
International
RFP RF-32079-AS (Replacement of Damaged Parts of Tatsuno Dispensing Unit at NVRO, BWP Division)
Solicitation # RF-32079-AS
Solicitation RF-32079-AS is issued by the Pakistan State Oil Company Ltd for the replacement of damaged parts of a Tatsuno dispensing unit located at NVRO within the BWP Division. This procurement opportunity was posted on October 29, 2026, with a response deadline set for November 4, 2026, at 09:15. The place of performance for these services is located in Pakistan. The primary point of contact for this solicitation is Arslan Sajjad, who can be reached via email at [email hidden]. While the solicitation is hosted on the Ariba portal, specific details regarding pricing, evaluation factors, and the detailed statement of work were not provided in the available metadata.
Pakistan State Oil Company Ltd

POSTED

about 8 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Fisher Recirculation Valve and Actuator DCI and OverhaulThis subcontract involves providing Disassemble, Clean, Inspect, and Overhaul services for two Fisher recirculation valves and actuators supporting prime contractors on City of Redding projects. The scope of work includes the disassembly of valve bodies, cleaning and inspection of diaphragms, seats, and seals, as well as the machining and lapping of valve seats. Additionally, the contractor is responsible for calibrating and testing actuators using Fisher OEM seal kits and specialized valve testing benches to ensure fully overhauled and calibrated equipment is delivered. The project is located in Redding, California, under NAICS code 811310. Interested parties must submit their responses by the deadline of December 4, 2026.
City of Redding

POSTED

about 9 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
WEG Industrial Motor DCI and OverhaulThis subcontract involves providing Disassemble, Clean, Inspect, and Overhaul services for two WEG motors supporting prime contractors on City of Redding projects in Redding, California. The scope of work includes the complete disassembly and cleaning of housings and windings, detailed inspections of rotors, stators, and bearings, and the necessary rewinding or repair of electrical components. The service provider is responsible for replacing bearings and conducting precision alignment and electrical integrity testing to ensure the motors are fully functional. The final deliverable consists of fully overhauled and tested WEG motors. This opportunity is categorized under NAICS code 811310, with a response deadline of December 4, 2026.
City of Redding

POSTED

about 9 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Sulzer Boiler Feedwater Pump DCI and OverhaulThis subcontract involves providing Disassemble, Clean, Inspect, and Overhaul services for two Sulzer boiler feedwater pumps supporting prime contractors on City of Redding projects. The scope of work includes the complete disassembly and cleaning of pump components, detailed wear inspections, and the overhaul of internal parts. The selected provider will utilize Sulzer-specific tooling and precision balancing equipment to perform necessary testing, balancing, and the application of industrial coatings and finishing to deliver fully operational pumps. The project is located in Redding, California, and falls under NAICS code 811310. Interested parties must submit their responses by the deadline of December 4, 2026.
City of Redding

POSTED

about 9 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves
Solicitation # 5740
The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.
City of Redding

POSTED

about 9 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Pump Refurbishment (Add-Alternate No. 3)This subcontract involves the refurbishment of two industrial pumps for prime contractors working on facility projects at Nassau Community College. The scope of work specifically covers one Marathon Electric and one Baldor Industrial Motor 10 HP pump, requiring a comprehensive process of inspections, the installation of replacement components, and final operational testing. The selected provider must ensure all work complies with OSHA standards and local building codes. Final deliverables include the fully refurbished pumps accompanied by detailed inspection reports and testing results. The project is categorized under NAICS code 811310, with a response deadline set for November 20, 2026.
Nassau Community College

POSTED

about 14 hours ago

DEADLINE

in 21 days
NAICS: 811310
New
WINDOW AY — 1680016170785 — N0038327QAA17
Solicitation # N0038327QAA17
Solicitation N0038327QAA17, issued by Navsup Weapon Systems Support for the Department of the Navy, seeks a contractor for the teardown, evaluation, repair, and modification of two window assemblies, identified by NSN 1680-01-617-0785. The requirement covers an induction period of one year from the date of the order, with a delivery timeframe of 90 days and shipping terms set as FOB Destination. Final inspection and acceptance will be conducted by the Contract Administration Office at the contractor's location. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073 and MIL-STD-129, with specialized labeling requirements for Depot Level Repairable items. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American program and cybersecurity reporting standards.
Navsup Weapon Systems Support

POSTED

about 14 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Annual And Periodic Inspections And Maintenance And Repair Services Of Port Authority Trans-Hudson Corporation (Path) Emergency Diesel And Natural Gas Generators -Three Year Contract
Solicitation # 2140379
The Port Authority of New York and New Jersey is soliciting bids for a three-year contract to provide annual and periodic inspections, maintenance, and repair services for emergency diesel and natural gas generators used by the Port Authority Trans-Hudson Corporation (PATH). This procurement, identified by solicitation number 6000003543 and NIGP code 28539, is focused on stationary generators. A pre-bid meeting will be conducted via Microsoft Teams on November 9, 2026, from 10:00 a.m. to 11:00 a.m. ET to review the requirements and solicitation documents. Bids must be submitted electronically through the Euna portal by the deadline of November 18, 2026. The Port Authority emphasizes a commitment to non-discrimination in accordance with Title VI of the Civil Rights Act of 1964, ensuring full and fair opportunity for all businesses regardless of race, color, national origin, age, or disability. Procurement operations are managed from 150 Greenwich Street, 21st Floor, New York, New York, and interested parties can contact the Procurement Operations Bid/RFP Custodian via email at [email hidden] or by phone at [phone hidden] for assistance.
The Port Authority of New York and New Jersey

POSTED

about 14 hours ago

DEADLINE

in 19 days

AI Contract Overview

Show more

Solicitation 140G0223Q0091, issued by the Department of the Interior's Office of Acquisition and Grants in Denver, seeks a contractor to convert an existing walk-in refrigerator into a walk-in freezer at the Kansas Water Science Center located in Lawrence, Kansas. This project involves technical modifications using existing U.S. Cooler components and is scheduled for a period of performance between May 1, 2023, and June 15, 2023. The procurement is designated as a total small business set-aside under NAICS code 811310. The response deadline for offers was extended via Amendment 0001 to April 24, 2023. Labor for this contract is subject to U.S. Department of Labor Wage Determination No. 2015-5335 for Douglas County, Kansas, ensuring compliance with the Service Contract Act and applicable Executive Orders regarding minimum wage requirements. The project is managed by the USGS OAG Denver Acquisition Branch.

General Info

Agency

Department Of The Interior → Ofc Of Acquisition Grants-Denver

Contract Value

$18,669

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

CO

Set-Aside

SBA

Awardee

TALON VETERAN SERVICES INCORPORATED

Award Issued Date

Documents

3

140G0223Q0091 Amendment 0001

PDF, High priority: read this firstamendment
High

140G0223Q0091 - Walk-in Freezer Conversion

PDF, High priority: read this firstrfq
High

Wage Determination No. 2015-5335 (Kansas, Douglas County)

PDF, High priority: read this firstwage-determination
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseAwarded
Posted

Solicitation

Notice updated

Response deadline changed from Apr 21, 2023 to Apr 24, 2023. The notice title changed.

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of The Interior → Ofc Of Acquisition Grants-Denver
Contacts1 person available
OfficeDENVER, CO, 80225, USA
Organization / AgencyDepartment Of The Interior → Ofc Of Acquisition Grants-Denver
Office AddressDENVER, CO, 80225, USA
Contacts
Theeke Cheryl
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
EXISTING WALK-IN REFRIGERATOR CONVERSION TO WALK-IN FREEZER

More opportunities from Department Of The Interior → Ofc Of Acquisition Grants-Denver

Same awarding agency

NAICS: 541380
New
Federal
B--METAGENOMICS & TRANSCRIPTOMIC SERVICES
Solicitation # 140G0226Q0145
The Department of the Interior, through the USGS OAG Denver Acquisition Branch, is soliciting quotations for a Firm Fixed Price Blanket Purchase Agreement (BPA) to provide next-generation sequencing services for the Upper Midwest Water Science Center’s Michigan Bacteriological Research Laboratory. The contract has a not-to-exceed value of $300,000.00 with an estimated period of performance from September 28, 2026, to September 27, 2031. This procurement is set aside for Women-Owned Small Businesses (WOSB) and Economically Disadvantaged Women-Owned Small Businesses (EDWOSB) under NAICS code 541380. The scope of work requires the contractor to provide shotgun metagenomics, whole genome sequencing (WGS), and RNA-sequencing services using technologies such as Illumina, AVITI, Oxford Nanopore, and PacBio. Key responsibilities include library preparation, quality control, and bioinformatics assistance, with a requirement to notify the government of QC issues within 30 business days and deliver data within 60 business days. Award will be based on the most advantageous offer, with non-priced factors—specifically past performance and technical capability—weighted more heavily than cost. Evaluation will focus on the qualifications of key personnel, references from three customers within the last three years, and the ability to meet specific sequencing depth and read length requirements.
Testing Laboratories and Services

POSTED

2 days ago

DEADLINE

in 5 days
View Details
NAICS: 541714
Federal
Q--AMPLICON SEQUENCING SERVICES
Solicitation # 140G0226Q0047
The Department of the Interior, through the USGS OAG Denver Acquisition Branch, is soliciting quotations for a Blanket Purchase Agreement (BPA) to provide next-generation amplicon sequencing services for the Michigan Bacteriological Research Laboratory. The agreement has a not-to-exceed value of $250,000 over a five-year period of performance from September 17, 2026, to September 16, 2031. The scope of work includes non-personal services such as library preparation for 16S V4 amplicon sequencing, library pooling, and sequencing using Illumina MiSeq or AVITI platforms to support research on bacterial pathogens, antibiotic resistance, and microbial ecology. Key deliverables include demultiplexed raw data and reporting metrics, with a required delivery turnaround of 60 business days from sample receipt. Award decisions will be based on technical and priced factors, with non-priced factors carrying significantly more weight. Technical evaluations will focus on the contractor's on-site equipment, personnel experience, quality control procedures, business establishment, and a capabilities narrative. Offerors must also provide two customer references from the last five years. The contract is subject to various federal regulations, including specific security prohibitions regarding certain telecommunications equipment and the requirement for electronic invoicing through the Invoice Processing Platform System. Quotations are due by November 5, 2026, and must be submitted via email to the primary point of contact.
Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

7 days ago

DEADLINE

in 7 days
View Details
NAICS: 541370
Federal
3DHP Surface Water and Hydrography Data AcquisitionThe 3DHP Surface Water and Hydrography Data Acquisition is a subcontract opportunity managed by the Department of the Interior's Office of Acquisition and Grants in Denver. The project focuses on the extraction and delineation of surface water and hydrography data to support USGS 3D National Topography Model projects. Utilizing advanced GIS software and Lidar/IfSAR elevation data, the contractor is responsible for mapping hydrographic features in strict accordance with Representation Extraction Attribution and Delineation rules and the USGS Elevation-Derived Hydrography Data Acquisition Specification. Classified under NAICS code 541370, the contract requires the delivery of fully processed hydrography datasets. The solicitation was posted on October 15, 2026, with a response deadline set for December 4, 2026.
Surveying and Mapping (except Geophysical) Services

POSTED

14 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541370
Federal
3DEP Lidar Data Collection and ProcessingThis subcontract, titled 3DEP Lidar Data Collection and Processing, involves the aerial acquisition and processing of high-resolution lidar data to support prime contractors on USGS 3D National Topography Model projects. The scope of work includes utilizing aircraft equipped with lidar sensors and high-precision GNSS/IMU systems to collect data over designated project areas. The selected provider will be responsible for processing point clouds in accordance with the 3DEP Lidar Base Specification to deliver high-resolution lidar datasets and digital elevation models for ingestion into the 3DEP dataset. Managed by the Department of the Interior's Office of Acquisition and Grants in Denver under NAICS code 541370, the response deadline for this opportunity is December 4, 2026.
Surveying and Mapping (except Geophysical) Services

POSTED

14 days ago

DEADLINE

in about 1 month
View Details
NAICS: 541360
Federal
C--Broad Agency Announcement (BAA) 3DNTM
Solicitation # DOIDSAM27G002
The U.S. Geological Survey (USGS) has issued Broad Agency Announcement DOIDSAM27G002 to establish partnerships for the acquisition of high-resolution 3D elevation and hydrography mapping data. This initiative, known as the 3D National Topography Model (3DNTM) Data Collaboration Announcement, is divided into two primary opportunities: the 3D Elevation Program (3DEP) for lidar data and the 3D Hydrography Program (3DHP). These partnerships leverage the USGS Geospatial Products and Services Contract (GPSC) to provide critical data supporting infrastructure planning, energy development, mineral discovery, and disaster response. Eligible applicants include federal agencies, state and local governments, tribes, academic institutions, and the private sector, though GPSC contractors and subcontractors are explicitly excluded. Project submissions are due by December 4, 2026, and will be evaluated individually based on project location, areal extent, cost share, proposal maturity, and past performance. Preference is given to projects exceeding 1,500 square miles and those located in priority areas where existing data is five or more years old in the contiguous US, or eight or more years old in Alaska, Hawaii, and U.S. territories. The standard period of performance for these projects is 18 to 24 months. All resulting data must conform to USGS product specifications and will be made available via The National Map Data Download and Visualization Services. Applicants must submit a project summary form, validation of funding partners, and a GIS file defining the project area.
Geophysical Surveying and Mapping Services

POSTED

14 days ago

DEADLINE

in about 1 month
View Details
NAICS: 611430
Federal
Technical Training and Equipment OnboardingThe contract seeks to deliver technical training to USGS personnel on the operation, maintenance, and data interpretation of a 4K line-scan camera system, with services provided either on-site or remotely. The training is designed to ensure personnel are fully proficient in using the system to collect and analyze high-resolution data, supporting mission-critical geological and environmental monitoring tasks. The effort is classified as a subcontract under NAICS code 611430, indicating a focus on professional and management training services. The acquiring agency is the Office of Acquisition and Grants in Denver, operating under the Department of the Interior, though specific location details for performance or contact are not provided. The contract was posted on April 24, 2026, and is currently open for participation through the SAM.gov portal.
Professional and Management Development Training

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541620
Federal
Accessibility Compliance and Testing (ACR/VPAT)The contract requires comprehensive accessibility testing and the generation of VPAT 2.1+ reports for all information and communication technology components, including camera systems, software applications, and processing stations, ensuring full compliance with Section 508 standards. The work must evaluate each ICT element for accessibility conformance, identify barriers, and document results in accordance with the latest VPAT template to support federal procurement requirements. The scope demands thorough technical evaluation and precise reporting to demonstrate adherence to accessibility guidelines across all specified systems. This subcontract is issued under NAICS code 541620 for other scientific and technical consulting services and is managed by the Office of Acquisition and Grants in Denver under the Department of the Interior. Though no solicitation number or specific place of performance is provided, the contract is posted as a subcontract opportunity with a posting date of April 24, 2026, and the work is expected to be completed in alignment with federal accessibility mandates without reliance on set-aside provisions. The point of contact details are not listed, and the performance location is unspecified, suggesting flexibility in execution as long as deliverables meet the required standards.
Environmental Consulting Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 511210
Federal
Plankton Classification and Image Processing Software DevelopmentThe contract involves the development of specialized operating software and machine learning-driven algorithms designed to classify plankton using imagery captured by a 4K line-scan camera. This work includes training and deploying artificial intelligence models to accurately identify and categorize plankton species from high-resolution underwater images, ensuring efficient and scalable analysis in marine research settings. The project also requires the configuration of a dedicated desktop processing station optimized to handle the computational demands of image acquisition, storage, and real-time algorithm execution, creating an end-to-end system tailored for scientific use. The software must be robust, precise, and capable of integration with existing marine monitoring infrastructure, with a focus on minimizing human intervention while maximizing classification accuracy. The effort is structured as a subcontract under the Department of the Interior’s Office of Acquisition and Grants in Denver, with the North American Industry Classification System code 511210 indicating it falls under software publishing. No set-aside provisions are specified, and the work is expected to be performed remotely or at the contractor’s facility, with the point of performance not defined further. The contract was posted in April 2026 and is accessible through the SAM.gov platform for eligible contractors.
Software Publishers

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 336612
Federal
Aquatic Deployment and Vessel Integration SystemThe contract entails the design and supply of a vessel-based deployment system specifically tailored for a 4K line-scan camera, demanding a custom-engineered solution that integrates mounting hardware, a flow meter for precise environmental monitoring, and a ruggedized transport case capable of withstanding harsh field conditions. The system must enable reliable, stable, and repeatable water-based operations, ensuring optimal camera performance during aquatic surveys while safeguarding sensitive equipment from vibration, moisture, and extreme temperatures. All components must be engineered for seamless interoperability and ease of deployment from mobile platforms in diverse water environments. This subcontract, issued under NAICS code 336612 for boat building, is managed by the Department of the Interior’s Office of Acquisition and Grants in Denver. The project requires a high degree of technical precision and durability for field use, with no specific set-aside designation indicated. Deliverables include fully assembled and tested hardware ready for immediate operational deployment, with no detailed performance location provided, suggesting flexibility across U.S. inland or coastal waterways. The contract was posted in April 2026, indicating a future procurement timeline for an acquisition that supports aquatic data collection missions critical to environmental monitoring and resource management.
Boat Building

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 334510
Federal
4K Line-Scan Camera System Integration and SupplyA 4K line-scan camera system is being supplied and integrated for aquatic deployment with the specific purpose of imaging plankton as small as 2 millimeters in size, requiring high-resolution color capture capabilities under challenging underwater conditions. The system features dual power support to ensure continuous operation in remote or extended missions and is engineered with a water-resistant design to withstand prolonged exposure to marine environments without degradation in performance or durability. The contract falls under NAICS code 334510, indicating classification within the manufacturing of other electronic components and products, and is structured as a subcontract issued by the Department of the Interior through the Office of Acquisition and Grants in Denver. Deployment will occur in aquatic settings unspecified in the posting, with no set-aside provisions or location details provided, emphasizing technical capability and environmental resilience as the primary selection criteria.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 493190
Federal
Sampler Packaging and LogisticsThe contract involves the packaging and shipping of configured passive air samplers that must be individually wrapped or placed in gas-resistant bags with minimal field assembly required. The primary objective is to ensure these samplers are securely prepared and delivered punctually to Denver, Colorado. This subcontract, titled "Sampler Packaging and Logistics," falls under the NAICS code 493190, indicating activities related to warehousing and storage. Issued by the Department of the Interior’s Office of Acquisition and Grants in Denver, the contract emphasizes efficient logistical handling to support environmental monitoring efforts. While some details such as solicitation number, point of contact, and specific place of performance remain unspecified, the focus remains on maintaining the integrity of the passive air samplers during transport and facilitating timely delivery to support subsequent field operations.
Other Warehousing and Storage

POSTED

7 months ago

DEADLINE

N/A
View Details
NAICS: 541370
Federal
Data Reporting and Isopleth MappingThe contract involves generating detailed tabular summaries of volatile organic compound (VOC) concentrations in relation to corresponding field data. Additionally, it requires the production of isopleth or contour maps that depict trichloroethylene (TCE) concentration levels using specific geographic coordinates provided. This work supports environmental data reporting and spatial analysis efforts, likely to aid in monitoring and decision-making processes related to contamination or pollutant distribution. Issued as a subcontract under NAICS code 541370, the contract is managed by the Department of the Interior's Office of Acquisition and Grants in Denver. Although the solicitation number and some location details are not specified, the contract was posted on April 15, 2026. The deliverables focus on clear visualization and reporting of chemical concentration data to facilitate comprehensive understanding and use of spatial environmental information.
Surveying and Mapping (except Geophysical) Services

POSTED

7 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Awarded
Federal
Generator Maintenance, Moore Air Base, Texas
Solicitation # 12639523Q0132
Mrpbs Minneapolis Mn

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
7125--23-NT0003-AITC Spacesaver Mobil Storage Shelves Platinum Maintenance Renewal (VA-23-00033151)
Solicitation # 36C10X23Q0131
Sac Frederick (36C10X)

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
FCI MCKEAN REPLACE DRYER AND INSTALL PROJECT (MOD 1)
Solicitation # 15B20923Q00000005
Fci Mckean

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Federal
J028--CAT Generator Maintenance Service
Solicitation # 36C25023C0094
250-NETWORK Contract Office 10 (36C250)

POSTED

over 3 years ago

DEADLINE

N/A
View Details
NAICS: 811310
Closed
Federal
MHE Preventive Maintenance & Repair Services
Solicitation # HQC00423Q0011
Defense Commissary Agency

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
DLA Disposition Services Lewis MHE Maintenance and Repair Services
Solicitation # SP451023Q1035
DLA Disposition Services - Ebs

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Closed
Federal
MAINTENANCE AND REPAIR ON FREEZERS
Solicitation # NIHOLAO6633569
National Institutes Of Health

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Closed
Federal
Sig Rifler Machine rebuild for ACC-WVA Watervliet Arsenal, Watervliet, NY
Solicitation # W911PT-Sig_Rifler_Machine
W6QK Acc Wva

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
Corrective maintenance, inspection, disassembly, and replacement of Grove crane 82-05757
Solicitation # N3904023P0103
Portsmouth Naval Shipyard Gf

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
H--Lifting Tools Certification
Solicitation # 140R2023Q0047
Mp-Regional Office

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
NAVO GENERATOR/UPS/HVAC MAINTENANCE, STENNIS SPACE CENTER, MS
Solicitation # N6945023R0057
Navfacsyscom Southeast

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details
NAICS: 811310
Awarded
Federal
Elevator Services at Fort Wainwright, Fort Greely, and Eielson Airforce Base
Solicitation # W912D0-23-R-0004
0413 Aq Hq Rco-Ak Wainwrig

POSTED

over 3 years ago

CLOSED

over 3 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS