This Combined Synopsis/Solicitation opportunity from Department Of Veterans Affairs was posted on August 20, 2025. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

J045--689-25-4-4829-0307: VACHS Fuel Storage Program Inspections and Testing (VA-25-00076294)

Closed

36C24125Q0666Federal

Submission Closed08/26/2025, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

SLED

RFB 2027-2029 Magnetic Rope Testing at Cannon Mountain

Solicitation # RFB 2027-2029 Magnetic Rope Testing at Cannon Mountain

The New Hampshire Department of Natural and Cultural Resources is seeking a vendor to provide non-destructive electromagnetic wire rope testing and inspection services at the Cannon Mountain Aerial Tramway and Ski Area for the 2027 through 2029 period. The scope of work includes testing four 51mm track cables, the 36mm upper haul rope, the 32mm lower haul rope for the Aerial Tramway, and the complete length of the 38mm Peabody Express detachable lift haul rope. The selected contractor must provide all necessary labor, equipment, and instrumentation to identify wire breaks, loss of metallic area, or other anomalies, delivering detailed written inspection reports and recommendations for corrective action. The contract will be awarded to the compliant vendor offering the lowest total cost. Bids must be submitted by November 16, 2026, and must be signed and notarized. Eligible vendors must be registered with the NH Bureau of Purchase and Property and, if applicable, be in good standing with the NH Secretary of State. Required insurance includes comprehensive general liability of at least 1,000,000 dollars per occurrence and 2,000,000 dollars aggregate, along with workers compensation. Performance is scheduled between 7:00 A.M. and 4:00 P.M., requiring ten days advance notice for scheduling. Invoices are to be submitted monthly, with payment issued within 30 days upon the state's satisfaction and acceptance of the work.

Department Of Natural & Cultural Resources

POSTED

DEADLINE

NDT and Quality Inspection ServicesThis subcontract for NDT and Quality Inspection Services supports prime contractors on DLA Aviation fuel valve projects for the Department of Defense. The scope of work involves performing critical quality assurance and non-destructive testing, specifically utilizing Fluorescent Penetrant Inspection, Magnetic Particle Inspection, and hydrostatic pressure testing. All work must be conducted using calibrated equipment by certified NDT technicians to ensure technical compliance. The selected provider is responsible for delivering detailed inspection reports and certifications of conformance. This opportunity is categorized under NAICS code 541380 and is associated with DLA Aviation in Oklahoma City. The response deadline for this requirement is November 21, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

Specialized Inspection and Testing ServicesThe Specialized Inspection and Testing Services subcontract involves providing independent quality assurance and non-destructive testing for prime contractors on Department of the Navy projects. The scope of work focuses on conducting visual inspections of weld joints according to MIL-STD-2035 and performing dimensional inspections per DI-MDTI-808089B utilizing precision measuring instruments and CMM. Qualified providers must hold Certified Weld Inspector credentials to deliver essential documentation, including conformance inspections, final assembly dimensional reports, and weld joint visual inspection reports. This opportunity is managed by the Navsup Weapon Systems Support Mech under the Department of Defense, with a response deadline set for December 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Calibration and Certification Services for Pneumatic Test SetThis subcontract for the Department of Defense involves providing calibration and certification services for pneumatic test sets supporting Navsup Weapon Systems Support projects. The selected contractor will be responsible for the final testing, inspection, and precision calibration of gauges, valves, and sensors. All work must be performed using NIST-traceable standards and precision pressure testing equipment in strict accordance with ANSI/NCSL Z540.3 or ISO-10012-1 standards. The primary deliverables for this engagement include the provision of detailed calibration certificates and a certified Ready For Issue inspection report. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support

POSTED

DEADLINE

First Article Testing (FAT) & Validation ServicesThis subcontract for First Article Testing (FAT) and Validation Services supports prime contractors on Army Contracting Command Detroit Arsenal projects. The scope of work involves performing independent testing and validation, specifically focusing on airflow, vibration, noise, and stress testing, as well as dimensional inspections against the Technical Data Package. To execute these tasks, the contractor will utilize specialized equipment including wind tunnels, vibration tables, and precision Coordinate Measuring Machines. The selected provider must hold ISO/IEC 17025 accreditation and DD 2345 certification to ensure technical compliance. Key deliverables for this engagement include the submission of a First Article Test Report and a formal certification of compliance. This opportunity is categorized under NAICS code 541380 and is managed through the Department of Defense.

POSTED

DEADLINE

NDT and Mechanical Testing for Special Emphasis FastenersThis subcontract involves providing non-destructive and destructive mechanical testing for special emphasis fasteners on behalf of prime contractors for Navsup Weapon Systems Support Mech shipboard projects. The scope of work includes performing liquid penetrant inspections and wedge tensile testing in strict accordance with T9074 AS-GIB-010/271, MIL-DTL-1222, and ASTM-F606 standards. To qualify, the contractor must maintain ISO/IEC 17025 accreditation and utilize ISO 10012 calibrated tools. Deliverables for this engagement consist of certified test reports and certification data submitted via DD Form 1423. The opportunity is categorized under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

CSI Certification and Data Reporting ServicesThis subcontract for CSI Certification and Data Reporting Services involves providing specialized inspection and certification for prime contractors working on US Navy Critical Safety Item projects. The scope of work requires the verification of critical characteristics according to the Technical Data Package and the application of DI-MISC-80678 data requirements. The selected provider is responsible for preparing Certification and Data Reports and submitting all necessary information through the Electronic Contractor Data Submission system using PKI Digital Certificates. Final deliverables include a validated Certificate of Compliance and a completed Certified Data Report. This effort is managed under the Department of Defense via the Navsup Weapon Systems Support Mech.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

First Article Testing and Validation (Nuclear C Seal)This subcontract for the Department of Defense and Navsup Weapon Systems Support Mech involves the first article testing and validation of nuclear C seals. The selected contractor will perform both destructive and non-destructive testing to verify that material properties and dimensional accuracy align with TDP Version 002 and IRPOD requirements. All work must be conducted using certified NDE tools and adhere strictly to MIL-I-45208 quality standards. The primary objective of the contract is to produce certified test reports and supporting data necessary for the submission of DD Form 1423. This opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Countermeasure Receiver RFI Testing and CertificationThis subcontract for Navsup Weapon Systems Support involves providing final performance testing and inspection services for prime contractors. The scope of work focuses on the RFI certification of Countermeasure Receivers, utilizing calibrated measurement tools and specialized test tooling. Additionally, the contractor is responsible for conducting dimensional readings in accordance with 46 CFR 51 and creating sequential process diagrams. To be eligible, the contractor must hold ISO 9001 or SAE AS9100 certification. The primary deliverables for this engagement are the RFI Certification and a Final Inspection Report. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense.

Navsup Weapon Systems Support

POSTED

DEADLINE

NDT and Hydrostatic Testing Services for Level I ComponentsThis subcontract involves providing independent non-destructive testing and hydrostatic pressure testing for shipboard valve projects supporting the Department of Defense via NAVSUP Weapon Systems Support Mechanicsburg. The selected provider will perform ultrasonic, X-ray, or dye penetrant inspections along with pressure chamber testing to certify Special Emphasis Level I integrity. Key deliverables include the provision of certified test reports and formal compliance certifications. To be eligible, the contractor must hold ISO/IEC 17025 and ISO 10012 accreditations and maintain a Confidential security clearance. The opportunity falls under NAICS code 541380, with a response deadline set for November 23, 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Non-Destructive Testing (NDT) ServicesThis subcontract for Non-Destructive Testing (NDT) Services involves providing specialized hull and structural inspections for prime contractors working on USCG vessel projects. The scope of work focuses on conducting ultrasonic thickness measurements and side-scan ultrasonic testing of hull plating to ensure structural integrity. The selected provider will be responsible for delivering comprehensive thickness measurement data and detailed inspection reports. Managed by the Department of Homeland Security under agency CG-SEA-C21, the work is designated for performance in Santa Barbara, California. The opportunity falls under NAICS code 541380, with a response deadline set for November 16, 2026.

POSTED

DEADLINE

Aviation Component Testing and Inspection ServicesThe Aviation Component Testing and Inspection Services subcontract involves providing specialized testing and inspection for prime contractors on NAVSUP WSS aviation projects. The primary objective is to certify assemblies as Ready for Issue through rigorous fatigue, crack, and wear inspections. These tasks are performed using specialized aviation test benches and non-destructive testing equipment, including X-ray, ultrasonic, and magnetic particle inspection. To qualify, service providers must adhere to DoD-approved inspection standards or maintain NADCAP certification. The successful contractor is responsible for delivering comprehensive inspection and test reports along with the final RFI certification. This opportunity is categorized under NAICS code 541380 and is associated with the Department of Defense.

Navsup Weapon Systems Support

POSTED

about 7 hours ago

DEADLINE

in about 1 month

AI Contract Overview

This contract involves providing inspection, calibration, testing, and training services for underground and above-ground storage tanks at the VA Connecticut Healthcare System, with a focus on compliance with EPA and CTDEEP regulations. The solicitation is set aside exclusively for Veteran-Owned Small Businesses and covers a base year plus four optional renewal years, each requiring the same scope of work. Bidders must demonstrate relevant experience, including at least three years working with fuel storage systems, and possess certifications from recognized industry organizations such as STI or API, with field representatives located within 200 miles of the VA facilities in West Haven and Newington. The procurement follows the Federal Acquisition Regulation (FAR) and VA-specific clauses, requiring submission of certifications, compliance certificates, and adherence to wage determinations. Quotes are due by August 26, 2025, at 2:00 PM EST, and should be submitted via email to the designated contracting officer. The contract aims to ensure ongoing compliance and safety of fuel storage systems through qualified inspection and testing services, supporting the VA’s regulatory obligations and operational safety standards.

General Info

VA Connecticut fuel tank inspection contract extended to August 26, 2025, set aside for Veteran-Owned Small Businesses.

Agency

Department Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)

Contract Value

$74,435

NAICS

541380 - Testing Laboratories and Services

Place of Performance

VA Connecticut Healthcare System (VACHS) West Haven Campus 950 Campbell Ave., CT, 06516, USA

Set-Aside

NONE

Awardee

MASS TANK INSPECTION SERVICES LLC

Award Issued Date

09/09/2025, 12:00:00 AM UTC

Documents

Attachment 3: Tailored 52.212-2 Evaluation—Commercial Products and Commercial Services

specifications

High

Quality Assurance Surveillance Plan - UST and AST Services

5 pages · qasp

High

Tailored FAR 52.212-1 Instructions to Offerors

4 pages · rfq

High

VACHS Fuel Storage Program Inspections and Testing (36C24125Q0666)

6 pages · rfq

High

VA Connecticut Healthcare System - Fuel Storage Tank Inspection and Testing SOW

sow

High

VA Notice of Limitations on Subcontracting - Certificate of Compliance

2 pages · certificate-of-compliance

High

Wage Determination 2015-4127 Rev. 31

11 pages · wage-determination

High

Wage Determination No. 2015-4127 - New Haven County, CT

wage-determination

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedAug 5

Combined Synopsis

Notice updatedAug 20

Response deadline changed from Aug 19, 2025 to Aug 26, 2025. Set-aside changed from Service-Disabled Veteran-Owned Small Business Set Aside to Veteran Set Aside. The notice description changed.

Response DeadlineAug 26

Deadline has passed

Submission Closed

08/26/2025, 06:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)

Contacts1 person available

OfficeTOGUS, ME, 04330, USA

Organization / AgencyDepartment Of Veterans Affairs → 241-NETWORK Contract Office 01 (36C241)

Office AddressTOGUS, ME, 04330, USA

Contacts

Mauricio DiazContracting Officer

contact@example.gov

+1 (555) 000-0000

Full Description

Amendment 01 - The purposes of this amendment is to: 1. Amend the response date to 2:00PM EST on 8/26/2025 2. Update Set-Aside status to reflect Veteran Owned Small Business Description This is a combined synopsis/solicitation for commercial products and commercial services prepared in accordance with the format in Federal Acquisition Regulation (FAR) subpart 12.6, Streamlined Procedures for Evaluation and Solicitation for Commercial Products and Commercial Services, as supplemented with additional information included in this notice. This announcement constitutes only solicitation; quotes are being requested, and a written solicitation document will not be issued. This solicitation is issued as an RFQ. The solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2024-07 This solicitation is set-aside for Veteran-Owned Small Businesses. The associated North American Industrial Classification System (NAICS) code for this procurement is 541380, with a small business size standard of $19M. The Product or Service Code is J045. The VA Connecticut Healthcare Systems (VACHS) requires inspection, calibration and testing services for Underground Storage Tanks (UST) and Above Ground Storage Tanks (AST) (Bulk Storage) and all associated components (e.g., Piping, Day tanks, Automatic Tank Gauging (ATG) systems, overfill protection, spill prevention) to comply with local, state and federal UST and AST regulatory requirements. The Environmental Protection Agency (EPA) and Connecticut Department of Energy and Environmental Protection (CTDEEP). All interested companies shall provide quotations for the following services: Line Item Description Period of Performance Quantity UoM Total Price 0001 Base Year: Inspection, Calibration, Testing, and Training Services in accordance with the SOW. 1 Year from Date of Award 1 Job - 0002 Option Year 1: Inspection, Calibration, Testing, and Training Services in accordance with the SOW. 1 Year from Date of Option Exercise 1 Job - 0003 Option Year 2: Inspection, Calibration, Testing, and Training Services in accordance with the SOW. 1 Year from Date of Option Exercise 1 Job - 0004 Option Year 3: Inspection, Calibration, Testing, and Training Services in accordance with the SOW. 1 Year from Date of Option Exercise 1 Job - 0005 Option Year 4: Inspection, Calibration, Testing, and Training Services in accordance with the SOW. 1 Year from Date of Option Exercise 1 Job - The Statement of Work (SOW) is provided in Attachment (1). Qualifications In addition to meeting the requirements of the SOW, all quoters must demonstrate the following qualifications 1. Quoters shall have a field service representative located within 200 miles of VA Connecticut Healthcare System (VACHS) West Haven and/or Newington Campuses. 2. Quoters shall have 3 years minimum work experience related to commercial and/ or industrial fuel storage system and all aspects of inspections, calibration and testing as well as being able to demonstrate effective awareness of applicable CTDEEP Rules and Regulations. 3. Quoters shall submit evidence of field office location within proximity of facilities, evidence of work experience with fuel storage systems, evidence of EPA and CTDEEP rules and regulations knowledge (e.g., training records, certificates) and documentation of factory certified service/maintenance training on specific equipment under the terms of this contract. Furnish all certifications, credentials, and qualifications prior to starting work. 4. Quoters and/or assigned project staff members shall be certified by the Steel Tank Institute (STI), the American Petroleum Institute (API), or have equivalent qualifications approved by the CTDEEP. Place of Performance VA Medical Center West Haven VA Medical Center Newington 950 Campbell Avenue 555 Willard Avenue West Haven, CT 06516 Newington, CT 06111 Provisions The following solicitation provisions apply to this acquisition: FAR 52.204-7 System for Award Management (NOV 2024) FAR 52.212-1, Instructions to Offerors Commercial Products and Commercial Services as outlined in Attachment (2). FAR 52.212-2 Evaluation-Commercial Products and Commercial Services outlined in Attachment (3). FAR 52.212-3, Offerors Representations and Certifications Commercial Products and Commercial Services (MAY 2024) (DEVIATION FEB 2025). Offerors must complete annual representations and certifications electronically via the System for Award Management (SAM) website located at https://sam.gov/ in accordance with FAR 52.212-3, Offerors Representations and Certifications Commercial Products and Commercial Services. If paragraph (j) of the provision is applicable, a written submission is required. System updates may lag policy updates. The System for Award Management (SAM) may continue to require entities to complete representations based on provisions that are not included in agency solicitations. Examples include 52.222-25, Affirmative Action Compliance, and paragraph (d) of 52.212-3, Offeror Representations and Certifications Commercial Products and Commercial Services. Contracting officers will not consider these representations when making award decisions or enforce requirements. Entities are not required to, nor are they able to, update their entity registration to remove these representations in SAM. Clauses The following contract clauses apply to this acquisition: FAR 52.204-9 Personal Identity Verification of Contractor Personnel FAR 52.212-4, Contract Terms and Conditions Commercial Products and Commercial Services (NOV 2023) FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Commercial Products and Commercial Services (JAN 2025) (Deviation FEB 2025) The following subparagraphs of FAR 52.212-5 are applicable: Subparagraph (b)(4), (b)(5), (b)(9), (b)(12), (b)(13) (b)(23), (b)(25), (b)(26), (b)(31), (b)(33), (b)(34), (b)(35), (b)(36), (b)(37), (b)(38), (b)(39), (b)(46), (b)(47), (b)(51), (b)(55), (b)(59), (b)(63), (c)(1), (c)(3), and (c)(8). FAR 52.204-9 Personal Identity Verification of Contractor Personnel FAR 52.217-8 Option to Extend Services (NOV 1999) FAR 52.217-9 Option to Extend Term of the Contract (MAR 2000) FAR 52.252-2 Clauses incorporated by Reference (FEB1998) VAAR 852.201-70 Contracting Officer s Representative (DEC 2022) VAAR 852.203-70 Commercial Advertising (MAY 2018) VAAR 852.204-70 Personal Identity Verification of Contractor Personnel (MAY 2020 VAAR 852.219-73 VA Notice to Total Set-Aside for Certified Service-Disabled Veteran-Owned Small Businesses (JAN 2023) (DEVIATION) VAAR 852.219-75 VA Notice of Limitations on Subcontracting Certificate of Compliance for Services and Construction (JAN 2023) (Deviation) (Attachment 4) Vendors are to submit the certificate of compliance (Attachment 4) along with their quotes. VAAR 852.222-71, Compliance with Executive Order 13899. (DEVIATION) (APR 2025) VAAR 852.232-72 Electronic Submission of Payment Requests (NOV 2018) FAR 52.252-2 Clauses Incorporated by Reference (FEB 1998) This contract incorporates one or more clauses by reference, with the same force and effect as if they were given in full text. Upon request, the Contracting Officer will make their full text available. Also, the full text of a clause may be accessed electronically at this/these address(es): https://www.acquisition.gov/browse/index/far https://www.va.gov/oal/library/vaar/ Wage Determination The following wage determination applies to this solicitation and is provided as Attachments (5 & 6): Wage Determination 2015-4127 (Revision No.: 31) Wage Determination 2015-4119 (Revision No.: 30) All quoters shall submit responses in accordance with FAR 52.212-1, Instructions to Offerors Commercial Products and Commercial Services as outlined in Attachment (2). Award will be based upon a comparative evaluation as outlined in Attachment (3). Responses should contain your best terms and conditions. Submission of your response shall be received not later than 26 August 2025 at 2:00 PM EST. All quotes shall be emailed to Maurice Diaz at Mauricio.Diaz@va.gov. Any questions or concerns regarding this solicitation should be forwarded in writing via e-mail to the Point of Contact listed below. Point of Contact: Maurice Diaz, 401-228-4743, Mauricio.Diaz@va.gov