Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

LCU 1600 Class Marine Propeller Manufacture

Active

Response Deadline12/14/2026, 09:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the manufacture of eight Left Hand LCU 1600 Class Marine Propellers for prime contractors under DLA supply contracts. The scope of work includes fabrication and casting according to NAVSEA Drawing 245-5110169, followed by precision machining to meet specific drawing tolerances. The project requires the use of large-scale precision casting equipment and materials that comply with the Buy American Act, while adhering to ANSI/EIA-649-A configuration management standards. Managed by the Department of the Navy through SPRMM1 DLA Mechanicsburg, the contract is designated as an SBA set-aside under NAICS code 336612. The performance of the contract will take place in Mechanicsburg, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline of December 14, 2026, for the delivery of the completed propellers identified by NSN 2010-01-607-6494.

General Info

Manufacture eight LCU 1600 marine propellers per NAVSEA drawings in Mechanicsburg, Pennsylvania.

Agency

Department Of The Navy → SPRMM1 DLA Mechanicsburg

NAICS

336612 - Boat Building

Place of Performance

MECHANICSBURG, PA, 17055-0788, USA

Set-Aside

SBA

Documents

This scope was carved out of SPRMM126QHF70.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PROPELLER,MARINE — 2010016076494 — SPRMM126QHF70

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 28

subcontract

Response DeadlineDec 14

Submission deadline

Response Deadline

12/14/2026, 09:30:00 PM UTCin about 2 months

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of The Navy → SPRMM1 DLA Mechanicsburg

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of The Navy → SPRMM1 DLA Mechanicsburg

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufactures Left Hand (LH) LCU 1600 Class Marine Propellers for prime contractors on DLA supply contracts. Performs fabrication and casting per NAVSEA Drawing 245-5110169 and precision machining to drawing tolerances. Utilizes large-scale precision casting equipment and Buy American Act compliant materials. Adheres to ANSI/EIA-649-A configuration management standards. Delivers 8 completed propellers (NSN 2010-01-607-6494).

Similar Contracts

Same NAICS industry code

Supplier of Marine Navigational Lights (NSN 6220016289651)This subcontract involves the procurement or manufacture of 85 units of Marine Navigational Lights meeting NSN 6220016289651 specifications. The supplier will support prime contractors delivering on DLA Troop Support Construction and Equipment contracts, with final delivery of the packaged and marked hardware to the DDSP New Cumberland facility. All deliverables must strictly adhere to packaging and marking standards MIL-STD-2073-1E, MIL-STD-129, and RP001. Additionally, the contractor is required to maintain full compliance with the Buy American Act and the Berry Amendment. The opportunity is categorized under NAICS code 336612 and is managed through the Department of Defense.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

O-Ring Component Supplier (NSN 5331-01-687-3913)This subcontract, managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, requires the sourcing and manufacture of O-rings meeting NSN 5331-01-687-3913 specifications. These components are intended for prime contractors delivering naval spare parts to the USS COOPERSTOWN LCS 23. To ensure quality and longevity, the contractor must package the items in medium-duty, waterproof, greaseproof, and opaque bags designed to prevent UV deterioration, with each package containing two O-rings. Eligible suppliers must maintain an active SAM registration and strictly adhere to all NSN standards. The performance of this contract is located at FPO 34085 under NAICS code 336612. Interested parties must submit their responses by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 10 hours ago

DEADLINE

Supply of Water Closets (NSN 4510015608924)This subcontract, issued by the Department of Defense for the DDSP New Cumberland Facility, requires the procurement and delivery of five water closets meeting NSN 4510015608924 specifications. The selected provider must ensure all units are packaged according to RP001 DLA Packaging Requirements for Procurement and delivered to the designated government location in New Cumberland, Pennsylvania, following DIBBS system requirements. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 336612. Interested parties must adhere to the response deadline of November 9, 2026, to provide the necessary supplies for prime contractors supporting DLA Troop Support contracts.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE7M4-27-T-1946

Solicitation SPE7M4-27-T-1946 is a small business set-aside fixed-price contract issued by the DLA Weapons Support Fluid Handling Division for the procurement of one marine hatch, identified by NSN 2040-01-655-3226. The required delivery date is October 23, 2026, with a delivery window of 10 days after receipt of order. The item is to be shipped to the 0553 CS BN CO A Composite AWCF SSF at Fort Hood, Texas. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001. Environmental compliance is mandatory, specifically the prohibition of Class I ozone-depleting chemicals. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment. Quotations for this requirement were due by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

DOG, DOOR, MARINE

Solicitation # SPE7M4-27-T-1957

Solicitation SPE7M4-27-T-1957 is a small business set-aside issued by the DLA Weapons Support Fluid Handling Division for the procurement of one marine door dog, identified by NSN 2040-01-649-3701 and part number 124-7386935 (53711) PC 51. The requirement specifies a delivery lead time of 20 days after order, with the destination for inspection and acceptance being the USS Ronald Reagan CVN 76 in FPO AP 96616. The award may be processed via automated award, and a price evaluation preference is provided for HUBZone small business concerns. The contractor must adhere to strict quality and security standards, including a manufacturer inspection system compliant with SAE AS9003 or ISO 9001. The use of additive manufacturing is prohibited unless specifically authorized. Security requirements include CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the item is subject to export controls under ITAR or EAR, requiring the contractor to have an approved US/Canada Joint Certification Program certification. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and all invoicing must be processed through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 10 hours ago

DEADLINE

Manufacture of Cable Assembly AB and Cable TC9007-2This subcontract through the Department of Defense and DLA Mechanicsburg involves the manufacture of custom cable assemblies for prime contractors supporting Naval Surface Warfare Center projects. The scope of work specifically requires the fabrication of Cable Assembly AB and Cable TC9007-2 in strict accordance with drawings 8290958 and 8290586 under CAGE 53711. The contractor must maintain rigorous compliance with Department of Defense item unique identification reporting and DODISS standards. Additionally, the provider must demonstrate the capability to manage NOFORN specifications via DD Form 1425 to ensure the secure handling of sensitive information throughout the delivery of the completed assemblies.

SPRMM1 DLA Mechanicsburg

POSTED

about 15 hours ago

DEADLINE

in about 1 month

Manufacture and Supply of Check Valves (NIIN 016579547)This subcontract involves the manufacture and supply of 18 check valves (NIIN 016579547) for prime contractors supporting U.S. Navy NAVSUP projects. The contractor is responsible for fabricating the units according to Cage Code 34228 design 8590952-D1217483 and Technical Data Package Version 005, utilizing precision machining to ensure all specific tolerances are met. The agreement requires strict adherence to regulatory standards, including Buy American compliance and the provision of MSDS documentation per OSHA and FED STD 313. Additionally, the contractor must obtain source approval as outlined in the NAVSUP Philadelphia brochure. This project is managed under the Department of Defense via the Navsup Weapon Systems Support Mech agency.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

TORQUE ASSIST ASSEM

Solicitation # N0010426QYA3Y

Solicitation NO0104-26-Q-YA3Y is a fixed-price requirement issued by NAVSUP Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of the Torque Assist Assembly (NSN 7HH 2040-01-088-4976). The project is tied to the FY26 S&OP project with a planned award in FY27. The government intends to make a single award based on a trade-off where past performance is considered more important than price. Evaluation of past performance will utilize the DoD Supplier Performance Risk System (SPRS) color ratings. The contractor must adhere to strict quality and technical standards, including MIL-STD-130 for marking, MIL-STD-2073 for packaging, and ANSI/ESD S20.20 for electrostatic discharge control. A critical requirement is the total absence of metallic mercury in the supplied materials. Performance is measured by the Repair Turnaround Time (RTAT), calculated from the physical receipt of the asset in the Commercial Asset Visibility (CAV) system to the date of government acceptance. Government Source Inspection (GSI) is required, and all freight is handled as FOB Origin. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The extended deadline for quote submission is December 4, 2026, at 4:30 PM local time.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

in about 1 month

SEGMENT #7 STERN

Solicitation # N0010427QLA16

Solicitation N00104-27-Q-LA16 is a Request for Quotation issued by NAVSUP Weapon Systems Support Mechanicsburg for the manufacture and delivery of one Segment #7 Stern (NSN 1940-01-676-6351). The item must be produced according to design reference Cage Code 66618 and comply with physical identification standards MIL-STD-130, Rev N. Delivery is required within 30 days of award, though accelerated delivery is encouraged, with shipping terms set as FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Government source inspection is mandatory, and both inspection and acceptance will occur at the point of origin. The government will utilize a trade-off process for award, prioritizing past performance over price. Offerors must be authorized distributors of the original manufacturer to be considered. Technical requirements include strict adherence to MIL-STD-2073 for packaging and MIL-STD-129 for marking. The contract incorporates various federal regulations, including Buy American and Balance of Payments programs, and requires the use of Wide Area WorkFlow (WAWF) for invoicing and receiving reports. All proposals must be submitted by November 27, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

Solicitation # N0010426QYAJZ

Solicitation N00104-26-Q-YAJZ is a competitive, fixed-price procurement for the manufacture of Gland Actuators (NSN 2040-01-093-7730) for use on Navy submarines. The requirement is categorized under NAICS code 336612 with a small business size standard of 1,000. Award will be made to the eligible, responsible offeror with the lowest price technically acceptable (LPTA) quote, though the government may consider past performance as a higher priority than price when determining the most advantageous offer. Technical requirements specify that the actuators must be manufactured from Nickel-Aluminum-Bronze per ASTM B150/B150M and adhere to drawing 4398602. The contract mandates strict quality assurance, including a mandatory first article testing and inspection process and the submission of a Quality Inspection and Test Plan for government approval. All supplied materials must be mercury-free, and the contractor must provide comprehensive objective quality evidence, including certified mill certifications and nondestructive testing reports. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. Packaging and marking must comply with MIL-STD-2073-1 and MIL-STD-129, with specific requirements for domestic and overseas shipping levels. The contractor is responsible for all inspections at the origin, with final acceptance conducted by the cognizant DCMA-QAR in coordination with the Naval Surface Warfare Center, Philadelphia Division.

Navsup Weapon Systems Support Mech

POSTED

about 15 hours ago

DEADLINE

USCG Response Boat Small Third Generation (RB-S III)

Solicitation # 70Z02326R93250001

The United States Coast Guard is soliciting proposals for the Response Boat Small Third Generation (RB-S III) program to recapitalize its aging fleet of 29-foot RB-S II platforms. This total small business set-aside procurement, under NAICS code 336612, seeks to award up to four Indefinite-Delivery, Indefinite-Quantity (IDIQ) contracts for the design, production, testing, and delivery of approximately 411 boats and associated purpose-built trailers. The scope includes comprehensive logistics support, technical documentation, and crew familiarization services. The anticipated ordering period spans ten years, consisting of a two-year base period and an eight-year option period. The acquisition utilizes a two-phase competitive process. In Phase I, the government evaluates written proposals based on mission effectiveness, production and management, and price, with non-price factors being significantly more important. Up to four awardees will each receive an initial delivery order to construct one demonstrator boat and trailer. Phase II consists of a 90-day in-water demonstration to evaluate performance, with the final best-value tradeoff resulting in the selection of a single IDIQ contractor for all subsequent production orders. Phase I proposals are due by 1400 Eastern Time on November 20, 2026, and must be submitted electronically via the DoD Secure Access File Exchange.

POSTED

about 15 hours ago

DEADLINE

Galvanized Boat TrailerThis subcontract opportunity, managed by DAS Procurement for the State of Connecticut, involves the fabrication and delivery of a specialized galvanized steel tandem axle trailer. The equipment is specifically designed to support electrofishing vessels used in CT DEEP Fisheries Division projects, requiring precise weight and capacity specifications, the installation of rollers, and the integration of waterproof LED lighting within waterproof housings. The project falls under NAICS code 336612 and is intended for prime contractors operating on these division projects. Interested parties must submit their responses by the deadline of November 12, 2026, to provide the completed trailer as specified in the contract requirements.

DAS Procurement

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of The Navy → SPRMM1 DLA Mechanicsburg

Same awarding agency

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging for prime contractors under DLA Mechanicsburg supply contracts. The scope of work requires the packaging of precision instruments in accordance with MIL-STD-2073-1 and the application of container markings per MIL-STD-129. To ensure compliance, the contractor must utilize MIL-SPEC crates, cushioning, and moisture barriers, and must hold official certification in Department of Defense packaging standards. The project entails the individual packaging and master-packing of 12 units for final shipment to TAC2. Performance will take place in Mechanicsburg, Pennsylvania, under the oversight of the Department of the Navy. Interested parties must adhere to the response deadline of November 27, 2026.

Motor Vehicle Towing

POSTED

about 23 hours ago

DEADLINE

Fluxmeter Hardware Supply (NSN 6625-01-514-3574)This subcontract involves the supply of 12 FLUXMETER units (NSN 6625-01-514-3574) for prime contractors supporting DLA Mechanicsburg. The selected provider must be the original equipment manufacturer or an authorized distributor capable of manufacturing items according to Technical Data Package Version 008. All units must undergo physical identification per MIL-STD-130, requiring the use of specific IUID marking equipment. The contractor is required to maintain NIST SP 800-171 cybersecurity compliance to ensure data security. Final delivery consists of 12 finished units accompanied by a Material Inspection and Receiving Report. The performance of this contract is centered in Mechanicsburg, Pennsylvania, under the oversight of the Department of the Navy.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 23 hours ago

DEADLINE

Specialized Electronic Component SupplyThis subcontract through the Department of the Navy, managed by DLA Mechanicsburg, involves the supply of military-grade electronic components, semiconductors, and capacitors. These materials are intended for prime contractors working on NAVSUP Weapons Systems Support radar projects. All parts must be sourced according to TDP Version 007 and delivered as either individual components or complete kits. To maintain strict quality and security standards, the provider must supply Certificates of Conformance and documented chain of custody from the original manufacturer to guarantee total traceability. The contract is categorized under NAICS code 423610, with the place of performance located in Mechanicsburg, Pennsylvania.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Circuit Card Assembly (CCA) Fabrication and AssemblyThis subcontract involves the fabrication and assembly of Circuit Card Assemblies for the MD-1286/SPN-43C Radar Modulator, supporting NAVSUP Weapons Systems Support radar projects for the Department of the Navy. The contractor is responsible for fabricating PCBs and assembling electronic components in strict accordance with TDP Version 007. The project requires the delivery of three completed assemblies, emphasizing rigorous quality control through 100% material traceability and UID markings as mandated by DFARS 252.211-7003. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 334418, with all final deliveries requiring comprehensive traceability documentation.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 23 hours ago

DEADLINE

Manufacture and Supply of LED Illuminator (Red)This subcontract, managed by the Department of the Navy via DLA Mechanicsburg, involves the manufacture and supply of one Red LED Illuminator for the USS MESA VERDE (LPD 19) under NAVSUP WSS projects. The contractor is required to produce the unit according to design specifications CAGE Code 1VR65 and reference 78081-NX-2, ensuring the delivery of NSN 5855-01-689-5755. The scope of work includes rigorous quality assurance inspections, full supply chain traceability, and CDAP compliance. All items must be packaged in accordance with MIL-STD-2073 and delivered with all necessary documentation. The project falls under NAICS code 335999, with performance based in Mechanicsburg.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

Certified Material Supply for D.E.R.M.This subcontract, titled Certified Material Supply for D.E.R.M., is issued by the Department of the Navy through the DLA Mechanicsburg agency. The contractor is responsible for supplying raw metals, polymers, or composites to prime contractors on DLA supply contracts, ensuring all materials adhere to the specific grades and standards outlined in TDP Version 001. Performance will take place in Mechanicsburg, Pennsylvania, under NAICS code 331110. Critical requirements for this contract include the provision of full supply chain traceability, supported by mill test reports and certificates of conformance. Additionally, the supplier must strictly comply with the Counterfeit Detection and Avoidance Program guidelines to ensure the integrity of all certified raw materials delivered. The response deadline for this opportunity is November 12, 2026.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 23 hours ago

DEADLINE

IUID Marking and Data RegistrationThis subcontract, titled IUID Marking and Data Registration, is issued by the Department of the Navy under the SPRMM1 DLA Mechanicsburg agency. The contractor is responsible for performing unique item identification marking for prime contractors on DLA supply contracts, specifically utilizing two-dimensional data matrix symbology in accordance with ISO/IEC 16022. The scope of work includes the delivery of marked parts and the submission of identifier data reports via the IUID Registry or Wide Area WorkFlow. To ensure compliance, the contractor must utilize laser marking or etching equipment that meets ISO/IEC 16022, 15434, and ANSI MH 10.8 standards. The performance of these services will take place in Mechanicsburg, Pennsylvania. Interested parties should note the response deadline of November 12, 2026, and the associated NAICS code 339943.

Marking Device Manufacturing

POSTED

about 23 hours ago

DEADLINE

D.E.R.M. Component FabricationThis subcontract for D.E.R.M. Component Fabrication involves the manufacture of physical components for prime contractors under DLA supply contracts. The selected provider must fabricate parts in strict accordance with TDP Version 001 and DODISS standards, utilizing equipment that meets all specified TDP tolerances. To ensure quality and authenticity, the contractor is required to comply with Counterfeit Detection and Avoidance Program guidelines and perform all necessary inspections and tests to substantiate conformity. The scope of work includes maintaining comprehensive supply chain traceability through the use of batch IDs, date codes, and serial numbers for all delivered components. Managed by the Department of the Navy via SPRMM1 DLA Mechanicsburg, the performance of this contract will take place in Mechanicsburg, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

POSTED

about 23 hours ago

DEADLINE

Power Distribution Unit (PDU) SupplierThis subcontract, issued by the Department of the Navy via DLA Mechanicsburg, requires the supply of one Power Distribution Unit intended for prime contractors on Department of Defense contracts. The hardware must strictly adhere to NSN 6120-01-699-9371 and Part Number 91417 PG-PDU-30AC-24DC-R1. To ensure operational readiness and regulatory adherence, the unit must be packaged according to MIL-STD-2073 and maintain full compliance with the Trade Agreements Act. The procurement falls under NAICS code 335999, with the final packaged unit to be delivered to the government destination in Mechanicsburg. Interested parties should note the response deadline of November 27, 2026, for this specific hardware requirement.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services supports prime contractors on DLA Mechanicsburg projects for the Department of the Navy. The scope of work involves providing specialized packaging and packing services for electronic components, ensuring strict adherence to MIL-STD-2073 and ASTM D3951-18 standards. To maintain component integrity, the provider must utilize anti-static, moisture-barrier, or shock-absorbent materials to deliver shipment-ready and properly labeled products. The performance of these services takes place in Mechanicsburg, Pennsylvania, with final delivery of the packaged components handled via F.O.B. Origin to Manassas, Virginia. This opportunity falls under NAICS code 488510 and was posted on October 28, 2026, with a response deadline of November 27, 2026.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Manufacture of Electronic Component (NIIN 016746980)This subcontract involves the manufacture of a specific electronic component, NIIN 016746980, for the Department of the Navy via DLA Mechanicsburg. The contractor is responsible for the fabrication and assembly of one physically marked and inspected unit in strict accordance with reference design A0091563. Compliance with MIL-STD-130, REV N for part marking and a strict zero-mercury policy for use in surface ships and submarines is mandatory. The project falls under NAICS code 334419 and requires adherence to DFARS 252.204-7012 cybersecurity standards. Performance will take place in Mechanicsburg, Pennsylvania. Interested parties must respond by the deadline of November 27, 2026.

Other Electronic Component Manufacturing

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Crating for Marine HardwareThis subcontract, titled MIL-SPEC Packaging and Crating for Marine Hardware, involves providing specialized packaging and preservation services for heavy marine propellers intended for DLA supply contracts. The contractor is responsible for packaging eight propellers using heavy-duty crates and marine-grade materials in strict accordance with MIL-DTL-2845 and MIL-STD-2073. Additionally, the scope of work includes applying UID labels and shipping marks per MIL-STD-130 and MIL-STD-129 to ensure the hardware is ready for FOB Origin shipment to DLA Distribution centers. Managed by the Department of the Navy through DLA Mechanicsburg, this SBA set-aside opportunity falls under NAICS code 339999. The place of performance is located in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of December 14, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 23 hours ago

DEADLINE

in about 2 months

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS