Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 3, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Material Handling Equipment (MHE) and Shipboard Mobile Support Equipment (SMSE) Maintenance

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 3 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
Bus Fire Suppression System Maintenance
Solicitation # WMATA-0000010906
The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310 and is managed through the agency's Virginia operations. The solicitation was posted on October 29, 2026, with a response deadline set for November 4, 2026. Interested parties must submit their responses by the specified cutoff date via the official supplier portal.
Washington Metropolitan Area Transit Authority

POSTED

about 3 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
International
Fuel Dispenser Technical Installation & Repair
Pakistan State Oil Company Ltd

POSTED

about 5 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
International
RFP RF-32079-AS (Replacement of Damaged Parts of Tatsuno Dispensing Unit at NVRO, BWP Division)
Solicitation # RF-32079-AS
Solicitation RF-32079-AS is issued by the Pakistan State Oil Company Ltd for the replacement of damaged parts of a Tatsuno dispensing unit located at NVRO within the BWP Division. This procurement opportunity was posted on October 29, 2026, with a response deadline set for November 4, 2026, at 09:15. The place of performance for these services is located in Pakistan. The primary point of contact for this solicitation is Arslan Sajjad, who can be reached via email at [email hidden]. While the solicitation is hosted on the Ariba portal, specific details regarding pricing, evaluation factors, and the detailed statement of work were not provided in the available metadata.
Pakistan State Oil Company Ltd

POSTED

about 5 hours ago

DEADLINE

in 6 days
NAICS: 811310
New
SLED
Fisher Recirculation Valve and Actuator DCI and Overhaul
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
WEG Industrial Motor DCI and Overhaul
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Sulzer Boiler Feedwater Pump DCI and Overhaul
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Overhaul Of Two (2) Boiler Feedwater Pumps, Motors & Valves
Solicitation # 5740
The City of Redding is soliciting proposals for the off-site shop inspection and overhaul of two Sulzer boiler feedwater pumps, two WEG motors, and two Fisher recirculation valves and their actuators. The scope of work includes the disassemble, clean, inspect, and overhaul (DCI) process, with the contractor managing all shipping, packaging, and handling of equipment to and from their facility. On-site services are limited to technical advisory supervision provided by Technical Field Advisors. A critical requirement is that the overhauled equipment must be returned to the power generation facility in Redding, California, within approximately 21 days of its initial removal and shipping. Award will be based on the best overall value, evaluated through a weighted system that prioritizes total project costs (30 points), contractor qualifications and experience (20 points), project approach and schedule conformance (20 points), understanding of project requirements (15 points), and proposal quality (5 points). The City is not required to award to the lowest cost proposer. Bidders must provide a bid security of 10%, along with payment and performance bonds of 100% and a maintenance bond of 50%. Proposals must be submitted by 3:00 p.m. PT on December 4, 2026, and must include a separate sealed envelope for the project costs and fee schedule. Because the services are off-site and professional in nature, prevailing wages under the California Labor Code are not required.
City of Redding

POSTED

about 6 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Pump Refurbishment (Add-Alternate No. 3)
Nassau Community College

POSTED

about 12 hours ago

DEADLINE

in 22 days
NAICS: 811310
New
WINDOW AY — 1680016170785 — N0038327QAA17
Solicitation # N0038327QAA17
Solicitation N0038327QAA17, issued by Navsup Weapon Systems Support for the Department of the Navy, seeks a contractor for the teardown, evaluation, repair, and modification of two window assemblies, identified by NSN 1680-01-617-0785. The requirement covers an induction period of one year from the date of the order, with a delivery timeframe of 90 days and shipping terms set as FOB Destination. Final inspection and acceptance will be conducted by the Contract Administration Office at the contractor's location. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Evaluation of past performance may include the use of the DoD Supplier Performance Risk System to assign color ratings. The contract mandates strict adherence to military packaging and marking standards, specifically MIL-STD-2073 and MIL-STD-129, with specialized labeling requirements for Depot Level Repairable items. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American program and cybersecurity reporting standards.
Navsup Weapon Systems Support

POSTED

about 12 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
Annual And Periodic Inspections And Maintenance And Repair Services Of Port Authority Trans-Hudson Corporation (Path) Emergency Diesel And Natural Gas Generators -Three Year Contract
Solicitation # 2140379
The Port Authority of New York and New Jersey is soliciting bids for a three-year contract to provide annual and periodic inspections, maintenance, and repair services for emergency diesel and natural gas generators used by the Port Authority Trans-Hudson Corporation (PATH). This procurement, identified by solicitation number 6000003543 and NIGP code 28539, is focused on stationary generators. A pre-bid meeting will be conducted via Microsoft Teams on November 9, 2026, from 10:00 a.m. to 11:00 a.m. ET to review the requirements and solicitation documents. Bids must be submitted electronically through the Euna portal by the deadline of November 18, 2026. The Port Authority emphasizes a commitment to non-discrimination in accordance with Title VI of the Civil Rights Act of 1964, ensuring full and fair opportunity for all businesses regardless of race, color, national origin, age, or disability. Procurement operations are managed from 150 Greenwich Street, 21st Floor, New York, New York, and interested parties can contact the Procurement Operations Bid/RFP Custodian via email at [email hidden] or by phone at [phone hidden] for assistance.
The Port Authority of New York and New Jersey

POSTED

about 12 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
Commercial Kitchen Equipment Repair ServicesThis subcontract for Commercial Kitchen Equipment Repair Services involves providing inspection, diagnosis, and repair of kitchen machinery for prime contractors working on Arizona Department of Corrections, Rehabilitation & Reentry facility projects. The selected provider is responsible for troubleshooting equipment according to industry standards and manufacturer specifications, supplying all required tools and diagnostic equipment, and ensuring all machinery is fully operational through a final visual walkthrough. Due to the nature of the work locations, personnel must obtain and maintain necessary security clearances to access secured prison perimeters. This opportunity is categorized under NAICS code 811310, with a response deadline of December 18, 2026.
Arizona Department of Corrections

POSTED

about 17 hours ago

DEADLINE

in about 2 months

AI Contract Overview

Show more

This subcontract opportunity with the Department of Defense for the Navsup Fleet Logistics Center Puget Sound involves the scheduled and unscheduled maintenance, repair, rework, and modification of approximately 276 Material Handling Equipment and Shipboard Mobile Support Equipment assets. Based in Bremerton, the contractor will utilize technical manuals, blueprints, and schematics to deliver ready-for-issue assets, requiring personnel who are trained and licensed in compliance with NAVSUP P-538. The project is categorized under NAICS code 811310 and is specifically set aside for SBA Certified Women-Owned Small Businesses. Interested parties must submit their responses by September 14, 2026.

General Info

DoD subcontract for MHE and SMSE maintenance in Bremerton for women-owned small businesses.

Agency

Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Bremerton, WA, USA

Set-Aside

WOSB

Documents

This scope was carved out of N0040626Q0362.

The full solicitation package (20 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Mechanic Labor

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → Navsup Flt Logistics Ctr Puget Sound
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs scheduled and unscheduled maintenance, repair, rework, and modification of MHE and SMSE assets for prime contractors on NAVSUP Fleet Logistics Center Puget Sound projects. Executes maintenance for ~276 pool assets using technical manuals, directives, blueprints, and schematics. Requires personnel trained and licensed in compliance with NAVSUP P-538. Delivers ready-for-issue MHE/SMSE assets.

More opportunities from Department Of Defense → Navsup Flt Logistics Ctr Puget Sound

Same awarding agency

NAICS: 326199
New
Federal
Cooler Hood and Cover Gaskets (OEM/Authorized Supply)This subcontract involves the manufacture or distribution of specialized cooler hood and cover gaskets for prime contractors supporting the Navsup Flt Logistics Ctr Puget Sound. The contractor must provide 11 total units across five CLINs, ensuring all items are produced according to MFR DWG: 099-00249-15 REV. G and packaged per ASTM-D-3951 for transport to SRF and JMRC Yokosuka, Japan. Eligible providers must hold OEM status or provide authorized distributor certification and possess the capability to handle invoicing through WAWF. The performance of this contract is centered in Bremerton, Washington, with a response deadline set for November 10, 2026.
All Other Plastics Product Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541511
New
Federal
CAD Interface Development and COBOL IntegrationThis subcontract, titled CAD Interface Development and COBOL Integration, involves providing specialized software engineering services for prime contractors supporting Navy Region Northwest projects under the Department of Defense. The primary objective is to integrate Identiv security software with Consolidated Aided Dispatch systems, specifically requiring the development of custom code for Identiv source code licenses and the creation of a functional interface between Identiv CAD software and legacy COBOL-based systems. The selected provider must ensure all deliverables meet strict Navy cybersecurity protocols and source code safeguarding standards. The final project requirements include the delivery of fully functional source code and a verified active system interface. This effort is categorized under NAICS code 541511 and is managed through the Navsup Fleet Logistics Center Puget Sound.
Custom Computer Programming Services

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 541511
New
Federal
HVEL Security Software Support and Vulnerability MitigationThe HVEL Security Software Support and Vulnerability Mitigation subcontract involves providing ongoing technical support and maintenance for the Hirsch/velocity closed-loop security alarm system used by prime contractors on Navy Region Northwest projects. Managed under the Department of Defense via the Navsup Fleet Logistics Center Puget Sound, the primary objective is to deliver a fully patched, licensed, and operational security alarm software system. Key responsibilities include monitoring for security vulnerabilities and ensuring that software patches are developed and deployed within a 30-day window. To maintain the necessary Authority to Operate, the contractor must ensure strict compliance with DoD RMF DoD 8510.01 and NIST SP 800-37 standards. This effort falls under NAICS code 541511, focusing on specialized software maintenance and cybersecurity mitigation.
Custom Computer Programming Services

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 513210
New
Federal
Sole Source OEM Hirsch Software Service Agreement
Solicitation # N0040627Q0009
Fleet Logistics Center Puget Sound is soliciting a firm-fixed-price service contract under solicitation N0040627Q0009 for an annual Software Service Agreement. The requirement is sole sourced to Hirsch Secure due to proprietary software information and a lack of available service partners. The scope of work involves the maintenance and support of the Hirsch/velocity (HVEL) closed loop single security alarm system and Identiv/HVEL software, including Consolidated Aided Dispatch (CAD) proprietary software, across several Navy Region Northwest locations: Naval Station Everett, Naval Magazine Indian Island, Naval Air Station Whidbey Island, and Naval Base Kitsap. The contractor is required to mitigate operational problems and security vulnerabilities via patches within 30 days and provide specific code writing for Identiv source code. To maintain the Authority to Operate (ATO), the vendor must comply with Department of the Navy DoD Risk Management Framework (RMF) DoD 8510.01 and NIST SP 800-37 for FISMA compliance. The period of performance for line item 0001 is from November 6, 2026, to November 5, 2027, with an anticipated award date in November 2026. The government will evaluate offers based on technical factors, including delivery date, price, and past performance. Payment will be processed via Wide Area Workflow (WAWF). The contract includes stringent requirements for item unique identification (IUID) per MIL-STD-130 and shipment labeling per MIL-STD-129. Additionally, the contractor must adhere to various FAR and DFARS clauses regarding cybersecurity, safeguarding covered defense information, and antiterrorism awareness training.
Software Publishers

POSTED

1 day ago

DEADLINE

in 5 days
View Details
NAICS: 339991
New
Federal
GASKET, COOLER HOOD
Solicitation # N0040627Q0011
Fleet Logistics Center Puget Sound is soliciting quotes under solicitation N0040627Q0011 for various cooler hood and cover gaskets, all specified per manufacturer drawing 099-00249-15 REV. G. The requirement includes eleven total units across five line items, ranging from one to four units each. This acquisition is a total set-aside for small businesses and service-disabled veteran-owned small businesses under NAICS code 339991. The government will select the most advantageous offer based on technical factors including delivery date, price, and past performance, with no specific order of relative importance. This is a brand-name acquisition requiring quotes from the original equipment manufacturer or authorized distributors, the latter of whom must provide official authorization documentation. The anticipated award date is November 2026, with a required delivery date on or before December 2, 2026. Items are to be shipped FOB Contractor Origin to SRF and JMRC Yokosuka in Japan. Packaging must adhere to ASTM-D-3951 standards and be capable of withstanding multiple transport modes and forklift handling. Invoicing must be processed through the Wide Area WorkFlow (WAWF) system, and all offerors must maintain active registration in the System for Award Management. Inspection and acceptance will occur at the destination upon verification that items are correctly packaged, marked, and labeled.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 336611
New
Federal
Full & Open Brand Name OEM "Curtiss-Wright Electro-Mechanical Corp" - Low Pressure Air Compressor (LPAC) Maintenance Services
Solicitation # N0040627Q0004
Fleet Logistics Center Puget Sound is soliciting a firm-fixed-price, full and open brand name requirement for Low Pressure Air Compressor (LPAC) maintenance services to support the USS SAN DIEGO (LPD-22) in Sasebo, Japan. The scope of work involves the replacement of the No.2 LPAC air end assembly for a Dresser-Rand Company Model GSS-200 rotary compressor, including all necessary labor and genuine OEM parts from Curtiss-Wright Electro-Mechanical Corp. The contractor is responsible for cleaning, inspection, and alignment of drive couplings and piping, with final acceptance contingent upon specific technical criteria, including a combined insulation resistance of 4 megaohms or higher and automatic loading at designated shipboard air pressures. The performance period is scheduled for 2026, with a final delivery deadline of November 23, 2026. Quotes will be evaluated based on technical capability, delivery date, past performance, and price, with a 10 percent price evaluation preference for HUBZone small businesses. Because this is a brand name requirement, offerors must provide OEM documentation ensuring parts and services are genuine, including manufacturer warranties and traceability. All invoicing must be processed through Wide Area WorkFlow (WAWF), and the contractor must comply with OSHA safety standards and strict packaging requirements per ASTM-D-3951 and various MIL-STD specifications.
Ship Building and Repairing

POSTED

1 day ago

DEADLINE

in 1 day
View Details
NAICS: 488510
New
Federal
Traceable Freight Forwarding to Yokosuka, JapanThis subcontract involves providing international shipping and logistics services for prime contractors supporting Navsup Fleet Logistics Center Puget Sound. The scope of work includes coordinating all necessary export documentation and ensuring fully traceable commercial freight transport from origins within the United States to the SRF and JRMC in Yokosuka, Japan. All hardware must be delivered specifically to DoDAAC N62758. To ensure operational compliance, the contractor must adhere to ASTM-D-3951 and MIL-STD-130 standards for all packaging and marking. This opportunity falls under NAICS code 488510 and is managed under the Department of Defense. The response deadline for this requirement is November 13, 2026.
Freight Transportation Arrangement

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
Federal
Supply of Leveling Plate Set ScrewsThis subcontract involves the procurement of 16 steel leveling plate set screws to support prime contractors on projects for the Navsup Fleet Logistics Center Puget Sound under the Department of Defense. The contractor is responsible for sourcing or manufacturing the set screws to precise length and thread requirements of .075-10UNC-I..25 inch length, ensuring they meet OEM part number 266556-P01 and are fabricated from steel meeting specification FF-S-S86 Type 6. The opportunity is categorized under NAICS code 332722. Interested parties must adhere to the timeline associated with the posting date of October 27, 2026, with a final response deadline set for November 13, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 332710
New
Federal
Supply of Taper Dowel Bolts and Base Ring KeysThis subcontract involves the supply of precision-machined taper dowel bolts and base ring keys for prime contractors supporting Navsup Fleet Logistics Center Puget Sound projects. The scope of work requires the machining of components to specific drawings using precision grinding and turning equipment, ensuring all materials comply with specification QQ-S-S34 or G37. The final deliverables consist of two taper dowel bolts and two base ring keys that must strictly adhere to OEM Part Numbers 43.5-9118-3 and 43.5-P118-A1. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense. Interested parties must note the response deadline of November 13, 2026, following the posting date of October 27, 2026.
Machine Shops

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
Federal
Supply of Housing Joint Screws and NutsThis subcontract involves the supply of specialized housing joint screws and matching nuts for prime contractors working on Navsup Fleet Logistics Center Puget Sound projects. The contractor is responsible for manufacturing four screws and four nuts that strictly adhere to the dimensions and material requirements specified in Technical Manual S9244-AR-MMA-010. These fasteners must be produced using precision threading equipment and high-strength or specialty alloy steel to meet OEM Part Numbers 43.5-0015-3 and 43.5-0015-5. The opportunity is categorized under NAICS code 332722 and is managed by the Department of Defense. Interested parties must submit their responses by November 13, 2026.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 332722
New
Federal
5305 SCREW
Solicitation # N0040627Q0007
Solicitation N0040627Q0007 is a firm fixed price requirement issued by the Navsup Fleet Logistics Center Puget Sound for the procurement of specific hardware components, including housing joint screws, nuts, taper dowel bolts, keys, and set screws. The requirement is designated as a sole source procurement to Kingsbury Inc., as they are the original equipment manufacturer listed in Technical Manual S9244-AR-MMA-010. The government will evaluate the offeror based on price reasonableness and past performance as part of the responsibility determination. The anticipated award date is November 2026, with a response deadline of November 13, 2026. The contract specifies that items must be delivered to SRF and JRMC Yokosuka in Japan, with inspection and acceptance occurring at the destination. Packaging and marking must adhere to ASTM-D-3951 and MIL-STD-130 standards, and shipments must be made via a fully traceable commercial freight method. Invoicing is required through the Wide Area WorkFlow (WAWF) system. The procurement is subject to various federal regulations, including DFARS requirements for safeguarding covered defense information and prohibitions on certain telecommunications equipment and business operations with the Maduro regime. All offerors must be registered in the System for Award Management (SAM) and provide a Unique Entity Identifier (UEI) and CAGE code with their submission.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 541330
New
Federal
Overseas Professional Support Services
Solicitation # N0040627R0003
Solicitation N0040627R0003 is a request for proposal for professional support services to benefit the U.S. Naval Ship Repair Facility and Japan Regional Maintenance Center (SRF-JRMC) in Yokosuka and Sasebo, Japan. This acquisition is a 100 percent small business set-aside restricted to SeaPort NxG MAC holders. The government intends to award a single Firm-Fixed Price Task Order with a base period from December 1, 2026, to November 30, 2027, and four subsequent option years. The comprehensive scope of work covers diverse functional areas, including IT and cybersecurity, solid and industrial waste management, aircraft carrier work integration and project management, logistics and technical engineering planning, records and information management, corporate communications, security program analysis, administrative and personnel support, mailroom operations, and fire safety officer services. The award will be based on a best-value trade-off methodology, where non-price factors—specifically technical capabilities, experience, and past performance—are significantly more important than price. Proposals must be submitted in four separate volumes covering technical capability, past performance, price, and contract information, with strict page limits for resumes and management plans. Key requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to specific security clearances and qualifications for key personnel. Performance will be monitored through a Quality Assurance Surveillance Plan and various Performance Requirements Summaries to ensure compliance with naval and Department of Defense standards.
Engineering Services

POSTED

2 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 811310
Closed
Federal
On-Call Elevator Repair and Emergency Services
261-NETWORK Contract Office 21 (36C261)

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Elevator and Vertical Transportation Equipment (VTE) Maintenance
261-NETWORK Contract Office 21 (36C261)

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Compressed Gas Cylinder Maintenance
DLA Energy Aerospace Enrgy-Dlae-M

POSTED

about 2 months ago

CLOSED

about 1 month ago
View Details
NAICS: 811310
Closed
Federal
16--FUSE-HYDRAULIC,AIRC, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QSB70
Navsup Weapon Systems Support

POSTED

about 2 months ago

CLOSED

10 days ago
View Details
NAICS: 811310
Awarded
Federal
VAPHS Loading Dock Door Repair
Solicitation # 36C24426P0441
244-NETWORK Contract Office 4 (36C244)

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 811310
Closed
Federal
Lima - Preventive Maintenance Cooling Towers 1&2
Solicitation # 19PE5026Q0059
Usembassy Lima

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Awarded
Federal
N--LAVO - SUPPLY INSTALL INTRUSION ALARMS
Solicitation # 140P8426Q0032
Pwr Pore Mabo (84000)

POSTED

about 2 months ago

DEADLINE

N/A
View Details
NAICS: 811310
Closed
Federal
Electrical maintenance/retrofit for Devlieg Mill Machining Center
Solicitation # W519TC-26-Q-A138
W6QK Acc-Ri

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Caterpillar Engines Maintenance
Solicitation # N6264926QB080
Navsup Flt Logistics Ctr Yokosuka

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
NEWPORT OBSERVATORY RAM PUMP REPLACEMENT
Solicitation # 140G0226Q0130
Ofc Of Acquisition Grants-Denver

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Bobcat S150 Skid Steers Repair - Sources Sought
Solicitation # PAN-054137
W6QM Micc-Ft Bliss

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 811310
Closed
Federal
Lima - Preventive Maintenance Cooling Towers 3&4
Solicitation # 19PE5026Q0060
Usembassy Lima

POSTED

about 2 months ago

CLOSED

about 2 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS