Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Homeland Security was posted on July 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Material Handling Equipment (MHE) and Warehouse Equipment Maintenance

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310
New
Kubota M8200 Clutch Replacement
Solicitation # kubota-m8200-clutch-replacement
Management and Training Corporation is soliciting lump sum fee proposals for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires a qualified contractor to provide all transportation, labor, materials, and equipment to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. The contractor must perform all work according to manufacturer specifications and provide a final summary of diagnostic findings, an itemized list of replaced parts, and warranty documentation upon completion. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified entities. Bids must be submitted via email to Angie Mahoney by 3:00 PM CST on November 3, 2026, and must include a bid sheet, proof of insurance, a completed supplier packet with a W-9, and applicable SBA certification letters. Award decisions will be based on best value, with a focus on administrative compliance and technical qualifications. The contract is subject to various Federal Acquisition Regulations, including standards for combating trafficking in persons, Buy American restrictions, and Service Contract Labor Standards per Wage Determination 2015-4687 Revision 31 for Kentucky.
Earle C. Clements Job Corps Center

POSTED

about 7 hours ago

DEADLINE

in 5 days
NAICS: 811310
New
SLED
SMDOT Elevator Maintenance
Solicitation # 12701633
The City of Santa Monica Department of Transportation (SMDOT) is soliciting bids for turnkey maintenance, inspection, and repair services for three hydraulic elevators located at 1620 6th Street. The equipment includes two passenger elevators and one freight elevator, specifically models AAK137, AA2986, and AEP227. The scope of work requires monthly systematic examination, lubrication, and repair of critical components, as well as monthly emergency recall and override testing in accordance with California Administrative Code Title 8, Section 3000(h). All provided materials must be new and meet Original Equipment Manufacturer standards. Bids must be submitted electronically via the OpenGov portal by December 3, 2026, at 3:00 pm. Qualified bidders must possess a valid C-11 California contractor's license and provide a maintenance supervisor to ensure compliance with safety requirements. The contract award is based on a weighted evaluation of experience and technical competence (25%), ability to meet work plans and timelines (25%), cost (20%), stability and references (10%), value add (10%), and quality control (10%). The City is not required to select the lowest monetary bidder. Key contractual requirements include a payment bond for awards exceeding 25,000 dollars, a Living Wage Certification for awards over 54,200 dollars, and compliance with the Oaks Initiative and ADA Title II. Successful bidders must provide a Certificate of Insurance naming the City of Santa Monica as an additional insured. Payment terms are net thirty days. The agreement includes an initial term with four subsequent annual renewal options.
D600 DEPT OF TRANSPORTATION - SaMoDOT

POSTED

about 14 hours ago

DEADLINE

in about 1 month
NAICS: 811310
New
SLED
CNG Fueling Station Maintenance and Repair Services
Solicitation # 2026-RFP-0441
The County of Sacramento is soliciting proposals under solicitation 2026-RFP-0441 to establish a contract for Compressed Natural Gas (CNG) fueling station preventative maintenance and repair services. The contract covers two facilities located at the Fleet Services Division and the Department of Airports. The selected contractor must provide certified CNG technicians to perform twice-monthly preventative maintenance and major services at 4,000 and 8,000-hour benchmarks. Service requirements include 24/7 availability, with on-site response times mandated within 48 hours for standard service calls and 24 hours for emergency calls. All work must adhere to manufacturer specifications and Cal/OSHA safety standards, including the provision of GHS Safety Data Sheets. The contract is designed for an initial one-year term with the option for four additional one-year extensions upon mutual agreement, with a scheduled award date of December 14, 2026. Award decisions will be based on factors other than price alone, utilizing a points-based scoring system that evaluates cost and the proposer's technical approach. Bidders must provide a Public Works and Prevailing Wage Contractor Registration number and are encouraged to utilize the County's Procurement Opportunities Program for small and micro-business preferences. Proposals must be submitted electronically via the SacCountyE bids portal by the final extended deadline of November 13, 2026.
DGS: CAPSD - Procurement

POSTED

about 15 hours ago

DEADLINE

in 15 days
NAICS: 811310
New
SLED
ELEVATOR & ESCALATOR MAINTENANCE, INSPECTIONS, AND TESTING
Solicitation # BPM059230
The Maryland Department of Transportation Maryland Transit Administration (MDOT MTA) is soliciting bids for a firm-fixed-price contract, AGY-26-001-MT, to provide comprehensive maintenance, inspection, and testing for elevators, escalators, and wheelchair lifts across various Metro stations in Maryland. The scope of work includes systematic preventive maintenance, emergency repairs, and deep cleaning to ensure all equipment remains in first-class operating condition in accordance with ASME A17.1 and A17.2 standards. The contract features a five-year base period with a total basis of award calculated at 4,750,000 dollars, which includes a 950,000 dollar allowance for reimbursable parts and materials. Bidders must maintain an operational office within 20 miles of Baltimore and provide certified mechanics with at least three years of documented experience. Award will be granted to the responsible bidder offering the lowest total price. Key procurement goals include a 17 percent Minority Business Enterprise (MBE) and a 1 percent Veteran-owned Small Business Enterprise (VSBE) participation rate. Bidders must possess at least three years of firm experience with comparable equipment and provide proof of significant insurance coverage, including 1 million dollars in general liability and 5 million dollars in pollution liability. Bids are due by November 12, 2026, and must include a bid bond, a contract affidavit, and detailed pricing for preventive maintenance and hourly labor rates. Performance is measured by the completion of specific checklist tasks rather than labor hours, and the contractor is required to submit safety reports within 24 hours of any incident.
Maryland Transit Administration

POSTED

about 16 hours ago

DEADLINE

in 14 days
NAICS: 811310
New
SLED
WOOHDR30R - Overhead Door Repairs and Maintenance - MDOT/SHA Worcester County
Solicitation # WOOHDR30R
Solicitation WOOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for the preventative maintenance and repair of 27 overhead doors and their related operators at the Worcester County Shop locations in Snow Hill and Berlin. The scope of work requires semi-annual 20-point inspections and on-call repair services with a mandatory response time of four business days. All repairs must be performed by technicians with at least two years of experience, adhere to manufacturer specifications and building codes, and utilize new, first-quality parts. The contractor is required to provide a not-to-exceed cost quotation before performing any repair work and must submit detailed written reports following each service visit. The contract will be awarded to the responsive and responsible vendor offering the lowest total bid price. To qualify, bidders must demonstrate at least two years of continuous professional experience in overhead door services, be registered with the State Department of Assessments and Taxation, and possess their own employees, equipment, and vehicles without the use of subcontractors. Required submission documents include the eMMA Price Form, a Bid/Proposal Affidavit, and reference checks from the last five years. Payment is processed through the Snow Hill Shop, with specific billing requirements for trip charges, manlift usage, and materials priced at or below retail cost or MSRP. All work must comply with MOSH and OSHA safety regulations.
State Highway Administration

POSTED

about 17 hours ago

DEADLINE

in 20 days
NAICS: 811310
New
SLED
26WS0011-Floor Care Equipment Preventative Maintenance and Repair Services
Solicitation # 26WS0011
Solicitation 26WS0011 is issued by the California Department of Veterans Affairs (CalVet) for a contractor to provide comprehensive preventative maintenance, inspection, repair, and operational support for commercial floor care equipment in Los Angeles, California. The scope of work covers a fleet of carpet extractors, auto scrubbers, floor machines, and specialty vacuums. The contractor is responsible for providing all necessary labor, materials, and transportation, though consumable supplies like chemicals and batteries are excluded unless specifically authorized. Key performance standards include a two-hour onsite response for emergencies, a one-business-day response for non-emergencies, and a 100% completion rate for scheduled preventative maintenance. The contract will be awarded to the lowest responsible bidder, with a five percent preference given to certified Small or Micro businesses and a priority award to Disabled Veteran Business Enterprises (DVBE) in the event of a tie. Bidders must submit their proposals via email by November 16, 2026, including a completed Rate Sheet, Bidder Certification form, and a valid California business license. The contractor must maintain a Commercial General Liability insurance policy of at least $1,000,000 per occurrence and employ qualified technicians. Payment is processed through monthly invoices submitted to the CalVet Contract Manager, with a $10,000 withholding from the final payment for prime contractors until DVBE subcontracting reports are certified.
California Department of Veterans Affairs

POSTED

about 17 hours ago

DEADLINE

in 19 days

AI Contract Overview

Show more

The contract covers preventive and corrective maintenance services for material handling equipment and warehouse systems including forklifts, pallet jacks, conveyor systems, and related machinery used within FEMA distribution centers. Services must ensure continuous operational readiness and safety compliance across all equipment types, with a focus on minimizing downtime and maintaining optimal performance in a high-volume logistics environment. The work falls under NAICS code 811310 and is structured as a subcontract, with no specific set-aside provisions outlined. The solicitation was posted on July 30, 2026, with a response deadline of August 31, 2026, at 3:00 PM. Performance will occur at various FEMA distribution center locations under the purview of the Incident Support SECTION(ISS70), a division of the Department of Homeland Security. While specific geographic details for performance locations are not provided, contractors are expected to support operations in federally managed emergency response facilities. All maintenance activities must adhere to federal standards and be scalable to meet fluctuating demands during disaster response periods.

General Info

Preventive and corrective maintenance for material handling equipment at FEMA distribution centers to ensure operational readiness and safety compliance.

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

DC, USA

Set-Aside

NONE

Documents

This scope was carved out of 70FB7026I00000009.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Vehicle and Equipment Maintenance for the CONUS Request for Information

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Incident Support SECTION(ISS70)
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Preventive and corrective maintenance on forklifts, pallet jacks, conveyor systems, and other warehouse equipment used in FEMA distribution centers.

More opportunities from Department Of Homeland Security → Incident Support SECTION(ISS70)

Same awarding agency

NAICS: 811310
New
Federal
Request for Information (RFI) - OCONUS Generator Maintenance
Solicitation # 70FB70OCONUSGeneratorMaintenance
The Department of Homeland Security, Federal Emergency Management Agency (FEMA) Logistics Management Directorate is conducting market research via a Request for Information to identify qualified contractors for on-site generator maintenance and testing services at five operation locations across three Outside Continental United States (OCONUS) regions. These locations include Caguas and Ponce in Puerto Rico, Aiea and Wahiawa in Hawaii, and Barrigada in Guam. The anticipated scope of work involves preventive and corrective maintenance, testing, and support services for a fleet consisting of skid-mounted units, older trailer-mounted units, new CAT units, and building backup units, including ATS and paralleling switchgear. Additionally, the contractor will be required to perform comprehensive inspections of external fuel tanks, such as Western Global Transcubes, during each scheduled service period. The anticipated period of performance is set to begin on June 30, 2027, with a contemplated structure of a 12-month base period followed by four 12-month option periods. FEMA is considering a single national award for all OCONUS locations under NAICS code 811310. Key personnel requirements include technicians with mandatory training and operational certifications, specifically including Tier 4 engine training, electrical licenses, and at least two OSHA-certified forklift operators. While the final acquisition strategy and contract type are still being determined based on market research, the government is seeking industry input on pricing structures and capabilities. Responses to this RFI are due by November 5, 2026.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

3 days ago

DEADLINE

in 7 days
View Details
NAICS: 811310
New
Federal
Request for Information (RFI) - CONUS Generator Maintenance
Solicitation # 70FB70CONUSGeneratorMaintenance
The Department of Homeland Security, through the Federal Emergency Management Agency (FEMA) Logistics Management Directorate, is conducting market research via a Request for Information (RFI) to identify capable contractors for on-site generator maintenance and testing services. The anticipated requirement focuses on four Continental United States (CONUS) locations: Atlanta, Georgia; Fort Worth, Texas; Greencastle, Pennsylvania; and Tracy, California. The scope of work includes preventive and corrective maintenance, emergency repairs, and load bank testing, with a specific emphasis on complex systems such as Tier 4 Final engines, DEF systems, automatic transfer switches, and parallel switching gear. The government is seeking information on required personnel qualifications, such as EGSA certifications and OSHA safety credentials, as well as recommendations for the most equitable contract type and pricing structure. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 811310 and Product Service Code J061. The anticipated period of performance is set to begin on June 30, 2027, though the final acquisition strategy remains to be determined based on the results of this market research. Interested respondents must submit their capabilities and responses to RFI questions by November 5, 2026, adhering to strict formatting guidelines, including a ten-page limit for responses and a two-page limit for capability statements. All submissions should be directed to Contracting Officer Oneko Dunbar and Contract Specialist Marcia Irizarry-Snyder.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

3 days ago

DEADLINE

in 7 days
View Details
NAICS: 312112
New
Federal
Request for Information (RFI) - Drinking Water
Solicitation # 70FB70Water
The Department of Homeland Security, through the Federal Emergency Management Agency (FEMA) Logistics Management Division, has issued a Request for Information (RFI) to identify and assess industry capabilities for an Indefinite Delivery, Indefinite Quantity (IDIQ) water recompete. The agency is seeking sources capable of providing bottled, canned, and extended shelf-life water (10-year shelf life) to support emergency response and steady-state operations both within the Continental United States (CONUS) and Outside the Continental United States (OCONUS). This market research effort focuses on understanding vendor production, storage, transportation, and delivery capabilities, specifically requesting data on maximum delivery quantities within the first 24 hours, from day 2 through 14, and sustainable delivery rates after day 14. This RFI is designated as a total Small Business Set Aside under NAICS code 312112 for the bottled water manufacturing industry. Interested respondents must submit their capabilities electronically to the Contracting Officer and Contract Specialist by 11:00 am ET on November 4, 2026, ensuring all water counts are provided in liters. Submissions are limited to 15 pages, including a cover page with company details and a response section not exceeding 10 pages. As this is an information-gathering exercise per FAR 15.101(e), responses do not constitute formal offers and the government is not committed to a specific acquisition approach at this time.
Bottled Water Manufacturing

POSTED

6 days ago

DEADLINE

in 6 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS