Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Mechanical Contractor for Generator Fuel and Exhaust

Active

Federal

Response Deadline09/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity is for a mechanical contractor to install fuel delivery and exhaust piping for prime contractors on USMMA projects in Kings Point, New York. The scope of work includes the installation of fuel lines, tanks, and exhaust systems to ensure safe venting through specialized piping and ducting, ultimately delivering fully operational systems. The project is a total small business set-aside under NAICS code 238220 and is managed by the Department of Transportation's Maritime Administration. Contractors must adhere to TAR 1252.223-70 regulations regarding the removal or disposal of hazardous substances when handling existing lines. The response deadline for this opportunity is September 22, 2026.

General Info

Mechanical contractor to install fuel and exhaust piping for USMMA projects in New York.

Agency

Department Of Transportation → 693JF7 DOT Maritime AdministrationView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Kings Point, NY, 11024, USA

Set-Aside

SBA

Documents

This scope was carved out of RFQGenerators.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RFQ 6923G226Q000001 Generators USMMA

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 16

subcontract

Response DeadlineSep 22

Submission deadline

Response Deadline

09/22/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Transportation → 693JF7 DOT Maritime Administration

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Transportation → 693JF7 DOT Maritime Administration

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs fuel delivery and exhaust piping for prime contractors on USMMA projects. Installs fuel lines, tanks, and exhaust systems to ensure safe venting using fuel piping and exhaust ducting. Must comply with TAR 1252.223-70 for the removal or disposal of hazardous substances if handling existing lines. Delivers operational fuel and exhaust systems.

Similar Contracts

Same NAICS industry code

ICE 8A - Ft Benning Improvements

Solicitation # 70CMSW25R00000011

This firm-fixed-price task order, issued under an 8(a) Multiple Award Construction Contract (MACC) for the Department of Homeland Security Immigration and Customs Enforcement, provides for design-build services to implement life, safety, and operational improvements at Fort Benning, Georgia. The project scope includes the installation of aluminum awnings, turf replacement and equipment procurement for Fiske Range, the demolition and site restoration of Building 2294, gutter and drainage improvements for Building 234, commercial HVAC unit replacements, and general facility improvements for Building 301 and the DAGr Team facility. The estimated magnitude of the project is between 4.0 million and 4.5 million dollars, with a period of performance not to exceed 365 days from the date of award. The award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach and possesses the necessary licensed design resources. Compliance with Davis-Bacon Act wage determinations for Georgia is required, including specific federal paid sick leave and minimum wage mandates. Contractors must submit proposals in two volumes: a technical and safety volume and a pricing volume using the provided CSI division template. Performance and payment bonds are required, and all invoicing must be processed electronically through the Invoice Processing Platform. Technical administration and final inspections will be managed by the Contracting Officer's Representative.

Bristol Alliance of Companies

POSTED

about 2 hours ago

DEADLINE

in about 18 hours

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

This project involves the replacement and upgrade of Rooftop HVAC Units (RTUs) for the Alpha, Bravo, Charlie, and Delta dorms, as well as a SCADA system upgrade at the Port Isabel Detention Center in Los Fresnos, Texas. The objective is to replace corroded and obsolete RTUs with high-quality, energy-efficient, and coastal weather-resistant systems that exceed minimum commercial and industrial standards. Additionally, the contractor must replace the current SCADA software, install two chemical feed pumps, and ensure the new system maintains continuity with water and wastewater plants while complying with Texas Commission of Environmental Quality standards. The contract is a Firm-Fixed-Price task order issued under an 8(a) Multiple Award Construction Contract (MACC) IDIQ, with an estimated magnitude between 1.2 million and 1.5 million dollars. The period of performance is 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Key requirements include the provision of a designated Project Manager with at least five years of federal contracting experience and the submission of a detailed quality control plan and safety plan. All contractors and subcontractors must be manufacturer-certified to install the proposed materials. Payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll in accordance with Davis-Bacon wage determinations for Cameron County, Texas. A one-year contractor warranty for installation and craftsmanship is required upon completion.

Bristol Alliance of Companies

POSTED

about 2 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work requires the replacement of 43 smoke detectors across specific dormitory rooms, including 12 detectors in rooms 11, 15, and 18, 12 detectors in room 19, and 19 detectors in rooms 20 and 21. The contractor must ensure all installed detectors communicate with the fire panel and that all work adheres to NFPA standards and local Authority Having Jurisdiction requirements. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, applicants must provide a completed bid sheet, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220. Award decisions will be based on the best value as determined by MTC. The contract mandates compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for labor rates in Washoe and Storey counties. Additionally, subcontractors must provide a 12-digit Unique Entity ID and certify their debarment status under FAR 52.209-6 if the subcontract exceeds 30,000 dollars. Strict adherence to government and Department of Labor guidance regarding the protection of sensitive and proprietary information is required.

Sierra Nevada Job Corps Center

POSTED

about 2 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation is seeking fixed-price lump sum bids for a subcontracting opportunity to replace a 20hp motor connected to the rooftop HVAC system at the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes providing all labor, supervision, materials, equipment, and permits necessary for the removal of the old motor and the installation of a new one, ensuring the system is fully operational through startup, testing, and commissioning. Bids are due by September 19, 2026, and must be submitted via email to the designated procurement contacts. This is a small business set-aside opportunity under NAICS code 238220, and awards will be based on overall best value. To be considered for an award, bidders must complete a physical site visit and submit a bid bond guarantee, a detailed cost breakout on company letterhead, and the MTC Bid for Lump Sum Contract form. Contractors are required to provide a Unique Entity ID and adhere to Davis-Bacon prevailing wage rates for Davis County, Utah. The project requires compliance with OSHA standards, federal and local codes, and the submission of performance and payment bonds upon receipt of an Intent to Award letter. Payment will be processed via pay applications using AIA G702 and G703 forms based on a previously submitted Schedule of Values.

Management & Training Corporation

POSTED

about 2 hours ago

DEADLINE

Joliet JCC Dorm Bathroom Renovations

Solicitation # joliet-jcc-dorm-bathroom-renovations

Management & Training Corporation (MTC), operator of the Joliet Job Corps Center for the US Department of Labor, is seeking a subcontractor for the renovation of thirty-two female dorm room bathrooms in Joliet, Illinois. This fixed-price, single lump sum project has an estimated value between $100,000 and $250,000 and falls under NAICS code 238220. The scope of work includes the removal and replacement of shower assemblies, installation of Moen Adler shower faucets, and the installation of Eljer Westerly tall elongated toilets, along with the necessary plumbing and waterproofing. The awarded contractor must complete all work within 60 consecutive business days following a written Notice to Proceed. Bids are due by September 23, 2026, and will be evaluated based on overall best value. A mandatory physical site visit and signature on the attendance roster are required prior to bid submission. Required documentation includes a detailed cost breakout on company letterhead, a bid bond of 20% for bids exceeding $25,000, and a completed MTC Supplier Packet. The contractor must adhere to strict labor standards, including paying prevailing wages per the provided Illinois Wage Determination and submitting weekly certified payroll reports. Additional requirements include providing a qualified onsite superintendent and maintaining specific insurance minimums, including $1 million per occurrence for general liability. Performance and payment bonds are required for awards over $25,000. The contractor must also comply with Department of Labor regulations regarding records management, privacy breach notifications, and mandatory employee training. Final payment is contingent upon the submission of two complete sets of operation and maintenance manuals and a successful final inspection.

Joliet Job Corps

POSTED

about 2 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. The project, identified as CBP7664, requires the contractor to provide all labor, materials, and supervision to execute a four-phase process: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor, and final system testing and commissioning. The estimated price range is between 0 and 25,000 dollars, and the work must be completed within 30 consecutive business days following the written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedule. Submission requirements include the MTC Bid for Lump Sum Contract form, a completed supplier packet with W-9 and self-certification, proof of insurance, and three professional references. A physical site visit and signature on the attendance roster are mandatory prior to submission. For bids equal to or greater than 25,000 dollars, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from an A-rated surety company. Compliance requirements include adherence to EPA Section 608 regulations for refrigerant recovery and the Davis-Bacon Act for prevailing wage rates in Washoe County. The contract incorporates various FAR clauses, including those regarding first-tier subcontractor reporting for awards over 40,000 dollars and small business representations under FAR 52.219-8. Final acceptance is contingent upon the completion of a punch list and the submission of a Notice of Final Completion, certified payroll reports, and operation and maintenance manuals. Bids are due by September 23, 2026, at 3:00pm PST.

Sierra Nevada Job Corps Center

POSTED

about 2 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking a subcontractor to replace a failing air-cooled chiller in Building 214/215 at the North Texas Job Corps Center in McKinney, Texas. The scope of work requires the demolition and disposal of the existing Carrier 246-ton unit and the installation of a like-kind, similar model replacement. Additional technical requirements include the installation of a JACE 9000 central integration point for building automation, the installation of four 3-way control valves for air handling units, and the cleaning and inspection of four air handling units, including the replacement of three variable frequency drives. Bids are due by September 18, 2026, and must include manufacturer equipment specifications, warranty information, and a Certificate of Liability Insurance naming Serrato Corporation as the holder. Insurance requirements include a minimum of 1 million dollars for Commercial General Liability and Comprehensive Automobile Liability, and 500,000 dollars for Employers Liability. For work exceeding 2,000 dollars, subcontractors must provide Form 1413 and adhere to Davis-Bacon Act certified payroll standards. The project concludes with a startup operational test and a final job discussion with the customer.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 2 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 involves HVAC and electrical upgrades at the Fairbanks Flight Service Station in Alaska. The scope of work includes the replacement of the FSS chiller, four AC units, chilled-water piping, and all associated electrical systems. To maintain operations during construction, the contractor must provide temporary and redundant cooling. Additional technical requirements include modifying Panel P1 and HVAC circuits, followed by system startup, testing, and commissioning. The project concludes with FAA training, the completion of punch-list items, and final closeout. The project is estimated to have a construction magnitude between 250,000 and 500,000 dollars, with a proposed start date of April 15, 2027. This opportunity is designated for various small business set-asides, including SDB, WOSB, HUBZone, and VOSB/SDVOSB, under NAICS code 238220. The primary point of contact for the solicitation is Masanori Akers, Parsons Subcontract Administrator.

PTSI Managed Services Inc.

POSTED

about 2 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 2 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

Adams & Associates, Inc. is soliciting a single lump sum contract to replace a failing 10-ton gas-fired packaged HVAC unit at the Atterbury Job Corps Center in Edinburgh, Indiana, specifically within Building 1091. The project requires the installation of a new 12.5 SEER packaged unit utilizing non-R22 refrigerants, such as R-410A or R-454B, while reusing existing ductwork, electrical disconnects, and thermostat wiring. The contractor must leave the old unit at the maintenance building for parts and provide labeled recovered refrigerant to the facility. All work must comply with EPA, OSHA, and Indiana state and local codes, and the contractor must provide a one-year workmanship guarantee along with manufacturer product warranties. The award will be based on best value, with evaluation weighted toward price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Mandatory requirements for bidders include attending the site visit on September 23, 2026, maintaining active SAM.gov registration with a Unique Entity ID, and holding a valid Indiana Contractor’s License. Proposals are due by October 5, 2026, and must include a detailed cost breakdown, a timeline for substantial completion, and certification of compliance with Davis-Bacon Act wage rates. Payment terms are Net 30, and the contractor must provide specific automobile and workers' compensation insurance naming Adams and Associates, Inc. as an additional insured.

Adams & Associates, Inc.

POSTED

about 2 hours ago

DEADLINE

Inland Empire HVAC Tile & Landscape Trade

Solicitation # inland-empire-hvac-tile-landscape-trade

Inland Empire Job Corps

POSTED

about 2 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

Adams & Associates, Inc. is soliciting a single lump sum contract to replace HVAC systems at the Atterbury Job Corps Center in Edinburgh, Indiana, specifically within the ABL Dormitory. The project requires the replacement of eight vertical up-flow gas-fired furnaces with DX-coils and their matched R-22 Bryant air-cooled condensing units. These must be replaced with new 12.5 SEER packaged units utilizing non-R22 refrigerants, such as R-410A or R-454B. The contractor will reuse existing electrical disconnects, ductwork, and thermostat wiring, and must ensure all recovered refrigerant is labeled and left on-site. Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and hold a valid State of Indiana Contractor's License. A mandatory site visit is scheduled for September 23, 2026, with final proposals due by October 5, 2026. Award decisions will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). The contractor must adhere to EPA and OSHA regulations, Davis-Bacon Act wage determinations, and provide specific insurance coverages, including automobile liability and workers' compensation. Final payment is subject to Net 30 terms and requires the submission of a completed SF 1413, certified payroll records, and a release of liens.

Adams & Associates, Inc.

POSTED

about 2 hours ago

DEADLINE

More opportunities from Department Of Transportation → 693JF7 DOT Maritime Administration

Same awarding agency

Environmental Remediation / Equipment Disposal SpecialistThis subcontract opportunity with the Department of Transportation Maritime Administration involves the removal and legal disposal of existing generators and automatic transfer switches for prime contractors at USMMA projects in Kings Point, New York. The selected specialist will be responsible for decommissioning old units, draining and disposing of diesel fuel and oils, and transporting equipment using specialized fluid extraction and hazardous waste vehicles. To qualify, the contractor must hold all necessary licenses and permits for hazardous substance disposal in accordance with TAR 1252.223-70 and provide all required disposal certificates and manifests. This is a total small business set-aside under NAICS code 562910, with a response deadline of September 22, 2026.

Remediation Services

POSTED

about 18 hours ago

DEADLINE

Electrical Contractor for Generator InstallationThis subcontract, issued by the Department of Transportation Maritime Administration, seeks an electrical contractor to perform installation, wiring, and integration for generator projects at Kings Point. The scope of work includes installing an 800-amp automatic transfer switch, managing electrical connections and grounding, and executing the final testing and commissioning of the electrical power system. The contractor is responsible for providing all necessary conduits, wiring, and testing equipment while ensuring full compliance with personnel security requirements under TAR 1252.204-70. The opportunity is designated as a total small business set-aside under NAICS code 238210. Interested parties must submit their responses by September 22, 2026. The primary objective of the contract is the delivery of a fully commissioned and operational electrical power system for USMMA projects.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 18 hours ago

DEADLINE

600 kW Diesel Generator and 800-Amp ATS SupplierThis subcontract opportunity with the Department of Transportation Maritime Administration requires the manufacture and delivery of a new 600 kW diesel standby generator and a new 800-amp automatic transfer switch. The equipment must adhere to the technical specifications outlined in the statement of work and be delivered to the project site in Kings Point, New York. The contract is designated as a total small business set-aside under NAICS code 335312. Interested parties must submit their responses by September 22, 2026, to support prime contractors working on USMMA projects.

Motor and Generator Manufacturing

POSTED

about 18 hours ago

DEADLINE

RFQ 6923G226Q000001 Generators USMMA

Solicitation # RFQGenerators

The Department of Transportation is soliciting quotes for the removal and disposal of an existing Cummins 600 kW diesel generator and Onan OTPC 800-amp automatic transfer switch, and the subsequent installation of a new 600 kW diesel standby generator and 800-amp automatic transfer switch at the United States Merchant Marine Academy in Kings Point, New York. This is a total small business set-aside under NAICS code 335999. The project requires the contractor to provide all labor, materials, equipment, and supervision for electrical, fuel, exhaust, grounding, and control connections, as well as final testing and commissioning. Because the facility is listed on the National Register of Historic Places, all work must adhere to the Secretary of the Interior’s Standards for the Treatment of Historic Properties. This is a Firm Fixed Price requirement and will be awarded based on the Lowest Price Technically Acceptable (LPTA) basis. Interested small businesses must submit their quotes via email to the designated contracting officers by 1:00 PM ET on September 22, 2026. Submissions must include a technical proposal demonstrating the work approach and timeline (maximum 3 pages), one example of relevant past performance from the last three years (maximum 2 pages), a price explanation, and the completed pricing sheet. Questions must be submitted by September 18, 2026. Invoicing will be handled through the Delphi eInvoicing system with NET-30 payment terms.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 18 hours ago

DEADLINE

A Study on Vessel Design Challenge

Solicitation # 693JF726R000016

The U.S. Maritime Administration (MARAD) is issuing a Request for Proposals (RFP No. 693JF726R000016) for a Vessel Design Challenge under the Maritime Environmental and Technical Assistance (META) program. The initiative seeks to fund multiple design teams to develop integrated vessel designs that achieve a 30% improvement in fuel efficiency and reduce underwater radiated noise (URN). Total available funding is up to 1.25 million dollars, with individual awards typically ranging between 150,000 and 450,000 dollars. The project timeline is generally 12 to 18 months, although some agreement terms specify a period of performance up to 24 months. Eligible applicants include all domestic entities other than individuals. For the purposes of this challenge, U.S.-registered entities are considered domestic applicants, even those with foreign parent ownership. While there is an evaluative preference for team leads that are U.S. companies with U.S. headquarters operating under the U.S. flag, this is not a disqualifying criterion for those with foreign parents. Design teams should ideally follow a design-build approach, incorporating naval architects, marine engineers, shipyards, and technology providers. Proposals are limited to 20 pages and must include a detailed design and modeling approach, a justifiable budget, and a project timeline. Key deliverables include a preliminary vessel design with technical details on hull form and propulsion, stability and load analyses, and a comprehensive economic analysis detailing the return on investment. Evaluation is based on the design integration plan, methodology, team capabilities, and budget justification. All applicants must maintain active registration in the System for Award Management (SAM) to be eligible for an award.

Research and Development in the Social Sciences and Humanities

POSTED

DEADLINE

Shipyard Integration and Manufacturing FeasibilityThis subcontract under the Department of Transportation Maritime Administration focuses on providing expert consulting for the MARAD Vessel Design Challenge. The selected provider will support prime contractors by evaluating the practical construction and buildability of novel vessel designs, ensuring they are manufacturing-feasible and commercially viable. A primary deliverable for this effort is a technical feasibility report detailing construction requirements and shipyard integration. The opportunity is categorized under NAICS code 336611 and emphasizes a preference for U.S. flag or U.S.-based operations. Interested parties must submit their responses by January 10, 2027, following the posting date of September 10, 2026.

Ship Building and Repairing

POSTED

DEADLINE

Maritime Economic Feasibility and ROI AnalysisThe Maritime Economic Feasibility and ROI Analysis subcontract, issued by the Department of Transportation's Maritime Administration, focuses on determining the commercial viability and return on investment for prime contractors involved in MARAD Vessel Design Challenge projects. The selected provider will utilize standard accounting methodologies to conduct ROI evaluations and analyze maritime market conditions, ensuring that technical designs are economically achievable and supported by accurate budget estimates. The primary deliverable for this engagement is a detailed cost and ROI analysis report. This opportunity, categorized under NAICS code 541611, was posted on September 10, 2026, with a response deadline of January 10, 2027.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Underwater Radiated Noise (URN) Analysis and MitigationThis subcontract with the Department of Transportation Maritime Administration focuses on Underwater Radiated Noise (URN) analysis and mitigation for MARAD Vessel Design Challenge projects. The selected provider will perform specialized acoustic modeling and design to reduce underwater noise signatures, utilizing hydro-acoustic simulation tools to conduct evaluations and calculations. The primary objective is to identify noise sources and develop mitigation strategies that align with international source level benchmarks. The scope of work requires the delivery of comprehensive URN evaluation reports and detailed noise reduction design specifications to support prime contractors. This opportunity falls under NAICS code 541715 and was posted on September 10, 2026, with a response deadline of January 10, 2027.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Marine Engineering and Fuel Efficiency AnalysisThis subcontract for Marine Engineering and Fuel Efficiency Analysis supports prime contractors on MARAD Vessel Design Challenge projects under the Department of Transportation Maritime Administration. The selected provider will perform detailed engineering analysis of propulsion systems and energy efficiency, utilizing simulation and modeling tools to specify systems that reduce fuel consumption. Key deliverables include fuel efficiency evaluation reports and propulsion specifications, supported by calculations that demonstrate the economic achievability of energy improvements based on international benchmarks. The opportunity was posted on September 10, 2026, with a response deadline of January 10, 2027, falling under NAICS code 541330.

Engineering Services

POSTED

DEADLINE

Naval Architecture and Preliminary Vessel DesignThis subcontract for Naval Architecture and Preliminary Vessel Design supports prime contractors on MARAD Vessel Design Challenge projects under the Department of Transportation. The scope of work involves performing primary architectural designs, including the development of preliminary designs, general arrangements, and hull form optimization. These tasks are executed using advanced CAD and Computational Fluid Dynamics tools to ensure technical feasibility and the delivery of comprehensive design documents. A primary focus of the contract is the integration of fuel efficiency and URN reduction specifications to meet international benchmarks for hull and superstructure designs. The opportunity is categorized under NAICS code 541330 and was posted on September 10, 2026, with a response deadline of January 10, 2027.

Engineering Services

POSTED

DEADLINE

Waterfront Duty Officer ServicesThe Waterfront Duty Officer Services subcontract, issued by the Department of Transportation's Maritime Administration, provides operational oversight and duty officer support for prime contractors on USMMA Waterfront Program projects. The selected provider will be responsible for performing duties associated with the Waterfront Duty Officer role, utilizing waterfront communication systems and safety equipment to ensure the safe and efficient execution of waterfront activities. This opportunity is a total small business set-aside under NAICS code 541690, with the place of performance located in Kings Point, New York. The solicitation was posted on September 8, 2026, and requires a response by October 9, 2026.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Rowing Equipment Maintenance and Repair ServicesThis subcontract for Rowing Equipment Maintenance and Repair Services supports the USMMA Waterfront Program under the Department of Transportation Maritime Administration. The selected provider will perform technical maintenance, rigging, and minor repairs on rowing shells to ensure all equipment is seaworthy. Additionally, the contractor is responsible for managing the transportation of shells to and from competitions using specialized racks and trailers. The opportunity is a total small business set-aside under NAICS code 811310, with performance taking place in Kings Point, New York. Interested parties must have experience in basic rowing equipment maintenance and submit their responses by October 9, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS