Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Mechanical Installation & Piping Systems

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the on-site installation of critical mechanical systems including plating tanks, pumps, heat exchangers, agitators, and associated industrial piping and fluid distribution infrastructure at a facility in San Diego, California, with a zip code of 92135. This work is classified under NAICS code 238220, indicating it pertains to plumbing, heating, and air-conditioning contractors, and is structured as a subcontract under the Department of Defense, specifically managed by DLA Aviation. The installation must be performed in accordance with industrial standards to ensure operational readiness and safety within the facility’s existing infrastructure. Timing is set with a posted date of July 1, 2026, indicating procurement activities will begin in the near future, though specific award or completion deadlines are not provided. All work is to be executed at the designated performance location in San Diego with no alternative sites permitted.

General Info

On-site installation of mechanical systems at San Diego facility under DoD subcontract, NAICS 238220, performance location fixed.

Agency

Department Of Defense → DLA AviationView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

San Diego, CA, 92135, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 1

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA Aviation

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA Aviation

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site installation of plating tanks, pumps, heat exchangers, agitators, and associated industrial piping and fluid distribution systems.

Similar Contracts

Same NAICS industry code

ICE 8A - Ft Benning Improvements

Solicitation # 70CMSW25R00000011

Solicitation 70CMSW25R00000011 is a firm-fixed-price task order issued under an 8(a) Multiple Award Construction Contract (MACC) for design-build services to support the Immigration and Customs Enforcement (ICE) Office of Firearms and Tactical Programs at Fort Benning, Georgia. The project, valued between 4.0 million and 4.5 million dollars, focuses on life, safety, and operational improvements. The scope of work includes the installation of two aluminum awnings at the shipping and receiving dock and Fiske Range Lane 2, turf replacement at Fiske Range, the demolition of Building 2294, gutter and drainage improvements for Building 234, commercial HVAC services and replacements, and general facility improvements for Building 301 and the DAGr Team facility. The period of performance is 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. The contract is subject to the Davis-Bacon Act, requiring prevailing wage rates and specific paid sick leave for workers. Performance and payment bonds are required per FAR 52.228-15. Proposals must be submitted in two volumes: a technical and safety volume and a pricing volume using the provided template. All payment requests must be processed electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 12 hours ago

DEADLINE

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

This firm-fixed-price task order, issued under an 8(a) MACC IDIQ, involves the replacement and upgrade of Rooftop HVAC Units (RTUs) for the Alpha, Bravo, Charlie, and Delta dorms, as well as a SCADA system upgrade at the Port Isabel Detention Center in Los Fresnos, Texas. The project objective is to replace corroded and obsolete equipment with high-quality, coastal weather-resistant, and durable systems that exceed commercial standards. The scope includes removing existing RTUs, replacing necessary piping, electrical, and ducting, and installing new SCADA software and two chemical feed pumps in compliance with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Key requirements include the submission of a Quality Control Plan, a safety plan, and the designation of a Project Manager with at least five years of relevant federal contracting experience. The contractor must also provide a one-year warranty for installation and craftsmanship and ensure all personnel pass required background checks for site access. Compliance with the Davis-Bacon Act and associated executive orders regarding wages and sick leave is mandatory. All payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 12 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work requires the replacement of 43 smoke detectors across specific dormitory rooms, including 12 detectors in rooms 11, 15, and 18, 12 detectors in room 19, and 19 detectors in rooms 20 and 21. The contractor must ensure all installed detectors communicate with the fire panel and that all work adheres to NFPA standards and local Authority Having Jurisdiction requirements. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, applicants must provide a completed bid sheet, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220. Award decisions will be based on the best value as determined by MTC. The contract mandates compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for labor rates in Washoe and Storey counties. Additionally, subcontractors must provide a 12-digit Unique Entity ID and certify their debarment status under FAR 52.209-6 if the subcontract exceeds 30,000 dollars. Strict adherence to government and Department of Labor guidance regarding the protection of sensitive and proprietary information is required.

Sierra Nevada Job Corps Center

POSTED

about 12 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation is seeking fixed-price lump sum bids for a subcontracting opportunity to replace the HVAC system at Building E8 Welding within the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes the complete change-out of the existing motor, installation of wiring, conduit, disconnects, breakers, fuses, and starters, and the subsequent validation of voltage, phase, and grounding. Deliverables include startup and testing documentation, onsite training for maintenance personnel, and the provision of manufacturer O&M manuals. All work must adhere to OSHA requirements, federal, state, and local codes, and site safety procedures. Bids must be submitted via email to nelson.dar@jobcorps.org and patricia.willover@mtctrains.com by September 19, 2026, at 3:00 PM MST. To be considered for award based on overall best value, offerors must complete a physical site visit, provide a detailed bid breakout on company letterhead, and submit a bid bond guarantee. The project is a small business set-aside under NAICS 238220 and requires compliance with Davis-Bacon prevailing wage determinations for Davis County. Awardees must provide a UEI number, submit a Schedule of Values for invoicing via AIA G702/G703 forms, and provide original payment and performance bonds from a surety with at least an A- rating within five business days of an Intent to Award letter. Performance dates will be established upon the signing of a Notice to Proceed.

Management & Training Corporation

POSTED

about 12 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. The project is structured in five phases: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor and related components, system testing and commissioning, and final closeout. The contractor must ensure full restoration of cooling capacity and operational efficiency while adhering to EPA Section 608 regulations for refrigerant recovery. The work must be completed within 30 consecutive business days following a written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedules. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid is required, along with performance and payment bonds from an A-rated surety company. Submission requirements include a signed bid sheet, a detailed bid breakout, and verification of a physical site visit. Contractors must comply with Davis-Bacon Act wage determinations for Washoe County and provide self-certification of their business size and socioeconomic category per FAR 52.219-8. Final payment is contingent upon the submission of a Notice of Final Completion, certified payroll reports, and two sets of operation and maintenance manuals.

Sierra Nevada Job Corps Center

POSTED

about 12 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This project involves the removal and replacement of shower diverters in eight bathrooms across two dormitories located in Indiana. The scope of work includes replacing existing Powers brand diverters with Delta or comparable models featuring readily available parts, as well as repairing or replacing any deteriorated piping leading into the diverters. The solicitation is open to various small business categories, including SDB, WOSB, HUBZone, and SDVOSB entities under NAICS code 238220. Proposals must be submitted via email to Tammy Swallows at Atterbury Job Corps by September 14, 2026, at 3:00 PM.

Adams & Associates

POSTED

about 12 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking bids for a subcontracting opportunity to replace a failing air-cooled chiller at the North Texas Job Corps Center, specifically within Building 214/215 in McKinney, Texas. The scope of work includes the demolition and disposal of the existing chiller, the installation and startup of a new air-cooled chiller, and the integration of building automation controls using a JACE 9000 central integration point. Additionally, the contractor is responsible for installing three-way control valves at four air handling units, replacing VFDs, performing AHU cleaning and inspection, and ensuring all wiring is plenum-rated. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, a Certificate of Liability Insurance naming Serrato Corporation as the holder, and Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars. Insurance requirements include a minimum of 500,000 dollars for Employers Liability and 1,000,000 dollars per occurrence for Commercial General Liability. The project is set aside for various small business categories, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Primary points of contact for this solicitation are Stacy Smith and Roy Henderson.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 12 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 is a presolicitation for HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska, with an estimated construction magnitude between 250,000 and 500,000 dollars. The scope of work includes the replacement of the Fairbanks FSS chiller, four AC units, chilled-water piping, and all associated electrical systems. To maintain operations during construction, the contractor must provide temporary and redundant cooling and perform modifications to Panel P1 and various HVAC circuits. The project is scheduled for a proposed start date of April 15, 2027. Final deliverables include the completion of startup, testing, commissioning, and punch-list work, as well as providing FAA training and project closeout. This opportunity is set aside for small businesses, including SDB, WOSB, HUBZone, VOSB, SDVOSB, and Alaskan small businesses, under NAICS code 238220. Interested firms should contact Masanori Akers, the Parsons Subcontract Administrator, for further information.

PTSI Managed Services Inc.

POSTED

about 12 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 12 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a pad-mounted gas-fired packaged HVAC unit at the Glazing, Welding, and Heavy Mechanics Building (1091) in Indiana. The existing 10-ton Carrier unit, which utilizes R-22 refrigerant, will be replaced with a new 12.5 SEER packaged unit using non-R22 refrigerants such as R-410A or R-454B. The scope of work requires the reuse of existing ductwork, electrical disconnects, and thermostat wiring. Following installation, the old unit and any recovered refrigerant must be labeled and left at the maintenance building for parts and reuse. The solicitation is managed by Adams and Associates, Inc., with a response deadline of October 5, 2026. This opportunity is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned businesses. Interested parties should contact Tammy Swallows for further information regarding this NAICS 238220 project.

Adams & Associates, Inc.

POSTED

about 12 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

Adams & Associates, Inc., operating for the U.S. Department of Labor, is soliciting a single lump sum contract to replace HVAC systems at the ABL Dormitory within the Atterbury Job Corps Center in Indiana. The project involves replacing existing R-22 Bryant gas-fired furnaces and condensing units with new 12.5 SEER packaged units utilizing non-R22 refrigerants such as R-410A or R-454B. The scope includes the installation of compatible coils and the reuse of existing electrical disconnects, ductwork, and thermostat wiring. All recovered refrigerant must be labeled and left on-site. Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and hold a valid Indiana Contractor's License. A mandatory site visit is scheduled for September 23, 2026, with final proposals due by October 5, 2026. Award decisions will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). The contractor must provide a sequenced construction schedule within 10 days of the Notice to Proceed and guarantee all workmanship for one year. Payment terms are Net 30, contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens. Compliance with EPA, OSHA, and Davis-Bacon Act wage determinations is required.

Adams & Associates, Inc.

POSTED

about 12 hours ago

DEADLINE

AAL-0810-01 Sitka (SIT) Flight Service Station (FSS) Fire Esc

Solicitation # AAL-0810-01

Solicitation AAL-0810-01 is a design-build construction project for the Sitka Flight Service Station in Sitka, Alaska. The scope of work involves the design and construction of an access stair platform serving the third floor of the facility. Comprehensive requirements include conducting a site survey, obtaining necessary permits, developing the final design, executing construction, performing inspections, completing the punch-list, and providing final as-built drawings. The project has an estimated construction magnitude between 250,000 and 500,000 dollars, with a proposed start date of February 1, 2027. This presolicitation is open to various small business set-asides, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone, and Veteran-Owned Small Businesses. The effort is managed by PTSI Managed Services Inc. and falls under NAICS codes 238220 and 238190. Responses were due by September 25, 2026.

PTSI Managed Services Inc.

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA Aviation

Same awarding agency

NSN 4810-01-187-9275, PART NUMBER 300310-101, DESCRIPTION: SLEEVE AND SLIDE, DI

Solicitation # SPE4A526R0304

The Defense Logistics Agency Richmond is conducting market research to identify capable sources for the manufacture and supply of 42 units of Sleeve and Slide, DI, part number 300310-101, NSN 4810-01-187-9275. This sources sought notice is for informational purposes only and does not constitute a formal solicitation or request for proposals. The procurement falls under NAICS code 332911, and the government is evaluating the market to determine if the requirement should be set aside for small businesses or pursued through full and open competition via a firm-fixed price contract. Interested parties must submit their organization's contact details and a tailored capability statement to Courtney Minor by 4:30 PM EST on September 16, 2026. Potential providers must demonstrate the capacity to handle all labor, materials, and equipment necessary for new manufacture, including component procurement, testing, packaging, and shipping. The government will assess the financial, technical, and human capital resources of respondents to ensure they can meet the scope and scale of the requirement.

Industrial Valve Manufacturing

POSTED

about 16 hours ago

DEADLINE

FY27-2A Foreign Bearings Waiver Package Sources Sought Notice

Solicitation # FY27-2AForeignBearingsWaiverPkgSourcesSoughtforDomesticBearings

The Department of Defense, through DLA Aviation, has issued a sources sought notice to identify viable domestic sourcing for several specific National Stock Numbers (NSNs) currently determined to be foreign manufactured. This effort is conducted in accordance with DFARS 225.7009 and DFARS 252.225-7016 to ensure compliance with domestic sourcing regulations for the listed bearing components. Interested parties should note that the government may not possess or have the authority to distribute all associated technical data, though current procurement item descriptions can be provided upon request. All standard requirements for source approval, configuration control, and part numbering apply. Responses are due by September 24, 2026, under NAICS code 332991.

Ball and Roller Bearing Manufacturing

POSTED

about 16 hours ago

DEADLINE

NSN 1420016869216, GYRO-OPTICS ASSEMBLY, WSDC: 64A HELLFIRE MISSILE

Solicitation # SPE4A626R0322

This solicitation by DLA Aviation is for a Firm Fixed Price contract to procure 48 units of a Gyro-Optics Assembly for the HELLFIRE Missile, identified by part number 13688208. The procurement is designated as a Critical Application Item, with shipping, inspection, and acceptance all occurring at the origin. Lockheed Martin is listed as an approved source for this requirement. The solicitation, numbered SPE4A626R0322, will be issued on September 16, 2026, and close on September 18, 2026. Award decisions will be based on a combination of price, past performance, and other evaluation factors. All solicitation documents are available electronically via the DIBBS system, and no paper copies will be provided.

Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

6150-Cable Assembly, Power, Electrical, Virginia Class Submarine

Solicitation # SPE4A626R0323

DLA Aviation is conducting market research to identify qualified parties capable of manufacturing a Power Electrical Cable Assembly for Virginia Class Submarines. The requirement specifically concerns NSN 6150-01-713-3680 and part numbers 8692175-4 and 1151100-103. This sources sought notice is intended to determine the most effective procurement method and whether the eventual contract will be set aside for small businesses or opened for full and open competition. Interested manufacturers must submit their capabilities, including their Cage Code, manufacturing location, and point of contact information, to Joshua Tuggle via email. This is not a formal solicitation or request for proposals, and the government assumes no financial responsibility for costs incurred during this voluntary submission process. Responses are required by September 18, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 16 hours ago

DEADLINE

Sources Sought for a potential Supply Chain Management Contract for F108 Engine Support – Mission Analysis

Solicitation # SPE4AX25RF108-0005

This Sources Sought Notice is issued by DLA Aviation to conduct market research for a potential supply chain management contract supporting the F108 engine. The government is seeking to determine if companies other than CFM International possess the capability to perform critical tasks, including assessing engine usage assumptions and life limited part limitations, updating thermal and stress models, certifying self-locking borescope plugs, and providing comprehensive program management support. The effort is intended to be supported under an existing Performance Based Logistics contract and falls under NAICS code 336413. Interested parties must submit non-proprietary responses by September 17, 2026, to Keith Allgeier. Submissions must include company identification details and demonstrate the firm's experience with the F108 engine, access to necessary engineering data, and a plan for transition and implementation. This notice is for planning purposes only and does not constitute a formal solicitation or a commitment by the government to award a contract.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

NSN 1430-012281363, CARTRIDGE, COMBINATI, WSDC: 39A

Solicitation # SPE4A727R0009

DLA Aviation is issuing a sources sought notice under solicitation SPE4A727R0009 for the procurement of 322 combination cartridges, identified by NSN 1430-012281363. The agency is seeking information on capable manufacturers, including their locations and contact details. Current approved sources include Pioneer Industries, LLC, S I T Corporation, and Arben Enterprises, Inc. Interested parties must submit their responses by September 17, 2026. Source Approval Requests must be handled via a DoDSafe link, which can be requested by emailing dlaavnsmallbus@dla.mil with the company CAGE code and the relevant NSN. The primary point of contact for this requirement is Grayson Andrews.

All Other Miscellaneous Textile Product Mills

POSTED

DEADLINE

DUCT ASSEMBLY, EXHAUST, LEFT HAND / NSN 1560-01-065-1906 / H1 HELICOPTER

Solicitation # SPE4A726R0807

DLA Aviation is seeking a 100% Small Business Set-Aside Indefinite Quantity Contract for the procurement of left hand exhaust duct assemblies, identified by NSN 1560-01-065-1906. The contract features a five year base period with an estimated annual quantity of 40 units. While the item is considered critical, it is not classified as a Critical Safety Item. The procurement requires contractor first article testing and adherence to export controls, with production units delivered FOB Destination and inspection occurring at the origin. The government intends to solicit and negotiate with a limited number of sources under FAR 6.302, though interested parties may submit capabilities or proposals within forty five days of the notice. Technical data is available via DIBBS, and the solicitation is expected to be issued on September 28, 2026. Award decisions will be based on a combination of price, past performance, and other evaluation factors. Prospective contractors must be registered in the System for Award Management and should be prepared for a potential reverse auction process.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 2 months

Wire Rope Assembly; PR: 7013064751 NSN: 4010-016863942

Solicitation # SPE4A626R0140

This solicitation from DLA Aviation is for the procurement of 371 units of a Wire Rope Assembly, identified by NSN 4010-016863942. The contract is a HUBZone Small Business Set-Aside, meaning only offers from HUBZone manufacturers or dealers providing a small business manufacturer's product will be considered. The delivery schedule is set for 262 days after receipt of order, with inspection occurring at the origin and shipping terms as FOB Destination. Award decisions will be based on a combination of price, past performance, and other evaluation factors. Offerors must provide specific design and material data according to Basic Drawing NR 19207 12649348, Revision C. Additionally, because the item requires restricted data, contractors must be certified by the DoD to access unclassified data via a submitted DD Form 2345. The solicitation is managed by Melinda Clayton and is expected to close by June 12, 2026.

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

DEADLINE

Impeller Assembly [WSDC: 06F] End Item: Aircraft, Hercules C-130, PR: 7007799416 NSN: 6620-004637489

Solicitation # SPE4A626R0129

This solicitation is for the procurement of 70 Impeller Assemblies (NSN 6620-004637489) for the Hercules C-130 aircraft. The contract includes a Government First Article Test of one unit due 180 days after receipt of order, with a total production delivery schedule of 418 days. Terms are FOB Origin for both shipping and inspection. This is a total small business set-aside, and the award decision will be based on price, past performance, and other evaluation factors. Offerors must provide design drawings and data in accordance with Basic Drawing NR 13873 and must be DoD certified to access unclassified data via DD Form 2345. Higher-level contract quality requirements apply under clause 52.246-11. The solicitation is issued by DLA Aviation and is available through the DIBBS portal, with an anticipated closing date of April 10, 2026.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

in about 1 month

INSULATION BLANKET, CABIN, AIRCRAFT / NSN 16680-01-559-2036 / CH-47 HELICOPTER

Solicitation # SPE4A727R0008

DLA Aviation is conducting market research to identify capable sources for the manufacture and supply of aircraft cabin insulation blankets, specifically NSN 1680-01-559-2036. This sources sought synopsis is intended to determine the procurement method and whether the requirement will be set aside for small businesses or opened for full competition. The scope of work includes providing all labor, materials, and equipment for new manufacture, as well as managing supply chain logistics, testing, and packaging for a five year base period. Interested parties must submit their organizational details and tailored capability statements to Christopher Rose by September 15, 2026. Because DLA Aviation does not possess complete technical data for this part, any contractor other than the currently approved source, AAR Component Services, must submit a Source Approval Request package. The government will evaluate respondents based on their technical resources, financial capacity, and ability to implement a project management plan that meets tight schedules and cost containment goals.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Makino U86 CNC Wire EDM with Turnkey Services

Solicitation # 27-15-1002

DLA Weapons Support Richmond is conducting market research to identify capable sources for a Makino U86 CNC Wire EDM for Tinker Air Force Base. The requirement is for a turn-key solution that includes the machine, technical data, shipping, unloading, rigging, installation, foundation work, IUID tagging, and training. While the government currently intends to solicit and negotiate with only one source under FAR 6.302, this sources sought notice serves to determine if a competitive procurement is warranted. Interested parties must submit their capabilities via email to the AVN IPE Market Research office by September 19, 2026. Submissions must include the tracking number 27-15-1002 in the subject line and are limited to ten single-sided pages with a minimum 10-point font. This announcement is for informational purposes only and does not constitute a formal solicitation, a request for a quote, or a commitment to award a contract.

Machine Tool Manufacturing

POSTED

DEADLINE

Supply of Specialized O-Rings for F135 Propulsion System

Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS