Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Medical Patient Transfer Slings and Hanger Bars

Active

Federal

Response Deadline08/15/2026, 04:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract seeks the supply of high slings and four-suspension-point hanger bars designed to support a maximum load of 770 lbs, ensuring safe and reliable patient transfers in medical environments. All items must comply with ISO 10535 safety standards and be fully compatible with existing medical lift systems used in healthcare facilities. The requirement is issued as a subcontract under NAICS code 339113, indicating a focus on medical equipment manufacturing, and is administered by the Department of Veterans Affairs through the 252-NETWORK Contract Office 12. The solicitation was posted on August 3, 2026, with responses due by August 15, 2026, at 4:59 a.m. The place of performance and specific delivery locations are not detailed, but the equipment is intended for use within VA healthcare operations. No set-aside provisions are specified, and no point of contact is listed, suggesting bidders should reference the official SAM.gov portal for submission details and further instructions.

General Info

Supply of 770-lb capacity medical slings and hangers compliant with ISO 10535 for VA healthcare use.

Agency

Department Of Veterans Affairs → 252-NETWORK Contract Office 12 (36C252)View Agency

NAICS

339113 - Surgical Appliance and Supplies ManufacturingView NAICS

Place of Performance

WI

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 15

Submission deadline

Response Deadline

08/15/2026, 04:59:00 AM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Veterans Affairs → 252-NETWORK Contract Office 12 (36C252)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Veterans Affairs → 252-NETWORK Contract Office 12 (36C252)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of high slings and four-suspension-point hanger bars rated for 770 lbs, compliant with ISO 10535 safety standards and compatible with medical lift systems.

Similar Contracts

Same NAICS industry code

APPLICATOR, DISPOSABLE

Solicitation # SPE2DS-26-T-305Y

The contract specifies the procurement of a disposable 6-inch wooden rod applicator, sterile and packaged two per packet with 100 packets per unit of issue, supplied by approved vendors including REDI PRODUCTS INC, MEDLINE INDUSTRIES, and McKesson Medical-Surgical. The item is regulated by the FDA and must be sourced only from approved manufacturers with specified part numbers. All packaging must comply with commercial standards and the Medical Marking Standard No. 1, replacing MIL-STD-129, with containers designed to prevent damage and ensure safe transport via common carriers at the lowest cost to the designated delivery point. The product must be free of intentional mercury or mercury compounds except in limited exempted uses, and portable devices containing mercury must meet Navy shockproof and secondary containment requirements. Delivery is required within 20 days FOB destination with zero tolerance for quantity variance, and inspection and acceptance occur at the delivery point. Packaging must adhere to MIL-STD-2073-1E, and all items must be properly marked in accordance with DLA’s medical marking guidelines. The solicitation is issued under contract SPE2DS-26-T-305Y with NSN 6515-00-564-8242, and bidders must clearly identify the company and part number being offered. The government requires confirmation of FDA-regulated status via EBS referral, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced in the document. This procurement is for a Fleet Prime Vendor item, and the unit of issue is a package (PG).

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

PANEL, MODULAR, HANGING

Solicitation # SPE2DH-26-T-5768

The contract is for a single unit of a modular hanging trauma panel designated by NSN 6530-01-515-7651, intended for rapid deployment in combat trauma care during CASEVAC operations. Constructed of black Cordura nylon, the panel is MOLLE compatible and designed to integrate seamlessly with military aircraft, ground vehicles, and fixed or temporary facilities. It features a comprehensive internal layout including four full-width storage pockets, one half-panel bellos pocket, and a total of ten modular pockets—six small, two medium, one long, and one flat—each labeled with removable low-light visibility markings to ensure quick identification under low-visibility conditions. The panel itself is marked internally and externally with low-light readable "TRAUMA" identifiers and supports immediate access to essential medical supplies, enabling effective "tail gate" medical response anywhere on the battlefield. The procurement falls under DLA packaging requirements and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. The solicitation number is SPE2DH-26-T-5768, issued on August 4, 2026, with bids due by August 11, 2026. Delivery is required within 20 days of award to Fort Bliss, Texas, 79918-2527. The contract is managed by the Department of Defense’s Medical Supply Chain FSH, with Tina Vu listed as the primary point of contact. Bidders must clearly identify the source and part number of the supplied item, and the purchase request number is 7017716143, with the unit of issue being each.

MEDICAL SUPPLY CHAIIN FSH

POSTED

about 10 hours ago

DEADLINE

SKIN CLOSURE, ADHESI

Solicitation # SPE2DS-26-T-306Y

The contract specifies the procurement of sterile adhesive skin closures in the form of Steri-Strip wound closure strips measuring 0.25 inches by 3 inches, with a total quantity of 150 strips per package. The strips are supplied in fifty sealed plastic envelopes, each containing three strips, and are available in two alternate backings: polypropylene film and nonwoven nylon fabric, both porous. The product must have a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which replaces MIL-STD-129. Packaging must meet commercial standards, with each unit sealed in a protective container and shipped in suitable exterior packaging to ensure safe delivery at the lowest carrier rate to the specified point of delivery in Hurlburt Field, Florida. The item is identified by NSN 6510-00-913-5874 and is classified as a Type I (Code Q) shelf-life item with a non-extendable 36-month expiration. All technical and quality requirements are governed by the DLA Master List, and bidders must provide the source and part number being offered. The solicitation, issued under SPE2DS-26-T-306Y, requires bids to be submitted by August 10, 2026, with delivery expected within 20 days of award.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

ELECTRODE, ELECTROCARDI

Solicitation # SPE2DS-26-T-306U

The contract specifies the procurement of eight units of electrocardiograph electrodes designed exclusively for use with the Cardiac Science Powerheart G5 automatic and semi-automatic AEDs. Each unit must be properly sealed in a protective container to prevent damage and packaged in commercial shipping containers suitable for safe delivery via common carriers at the lowest possible rate to the designated delivery point in San Diego, California. The materials must comply with Medical Marking Standard No. 1, which replaces all references to MIL-STD-129, and all packaging and labeling requirements are governed by DLA Packaging Requirements for Procurement and other technical and quality standards referenced in the DLA Master List. Each unit must have a minimum shelf life of 24 months, with no more than three months having elapsed from the date of manufacture to the date of government delivery. Labels on each unit must include the NSN 6515-01-652-8523, manufacturer name and CAGE code, manufacturer date, expiration or retest date, and the contract number or lot number. All supplies are subject to removal of government identification if not accepted, and the solicitation is governed by the revision of the DLA Master List effective on the solicitation issue date. The contract, awarded under solicitation SPE2DS-26-T-306U, has a response deadline of August 10, 2026, and requires delivery within 20 days after order placement.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

BANDAGE KIT, ELASTIC, AB

Solicitation # SPE2DS-26-T-306L

The contract specifies the procurement of an elastic abdominal wound bandage kit, designed for use in military trauma scenarios and selected for inclusion in the Warrior Aid and Litter Kit and vehicle-mounted trauma kits for the U.S. Army. Each kit is sterile and contains a high-absorbency white pad measuring 12 inches by 12 inches, an extra-wide secondary dressing, and an application bar. The unit of issue is a kit, with a total quantity of three kits required. The product must have a shelf life of 60 months, and no more than nine months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA packaging requirements, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements. The item is identified by NSN 6510-01-532-6656, and the contract solicitation number is SPE2DS-26-T-306L, issued by the Department of Defense’s Medical Supply Chain. Delivery is due within five days of award, with the place of performance listed as Watervliet, New York. The primary point of contact is Tiffany Parker, with email and phone details provided. The solicitation was posted on August 4, 2026, with a response deadline of August 10, 2026, under a federal procurement with NAICS code 339113.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-305L

The contract specifies the procurement of 150 pairs of non-linear, small-sized, triple-flange ear plugs in yellow, each pair featuring a detachable cloth cord and packaged in a clear pillow case with a black beaded chain. These ear plugs provide a Noise Reduction Rating of 24 dB when the protective cap is closed and 12 dB when open, meeting specific hearing protection standards. The item is identified by NSN 6515-01-632-4167 and is being requested in three boxes, each containing 50 pairs, with delivery required within 20 days after award. Bidders must supply the exact source and part number as referenced in the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications incorporated into this solicitation. Compliance with DLA packaging standards and the removal of government identification from non-accepted supplies is mandatory. The solicitation, issued under number SPE2DS-26-T-305L, was posted on August 4, 2026, with responses due by August 10, 2026. It falls under NAICS code 339113 and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF office. The primary point of contact is Chandler Alvarez, reachable via email and phone provided in the contract data. The purchase request number is 7017721062, and bidders must ensure their submission aligns with the DLA Master List version in effect on the solicitation issue date, as this determines applicable technical and quality criteria. The contract is a federal procurement and the place of performance is unspecified, but the buyer is located in the United States.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

NEEDLE, HYPODERMIC

Solicitation # SPE2DS-26-T-305N

The contract is for the procurement of 500 hypodermic needles, 16 gauge by 3/4 inch, packaged in units of 100 per package, with a total of five packages required. Each needle must be rigidly packaged in color-coded aluminum hub with a two-piece rigid pack sheath, and all units must meet the Medical Marking Standard No. 1, superseding MIL-STD-129. The product has a shelf life of 60 months, and at the time of receipt by the first government activity, a minimum of 51 months of shelf life must remain. All packaging must be labeled with the manufacturer’s lot or control number and date of manufacture, prefixed with “MFD,” and must comply with ASTM D3951 unless superseded by DLA’s Master List of Technical and Quality Requirements. The item is regulated by the FDA and requires referral through EBS for confirmation prior to award. Packaging, labeling, and shipment must follow DLA’s specifications, including use of traceable freight methods and exclusion of parcel post. The delivery destination is Fort Campbell, Kentucky, with a required delivery date of August 5, 2026, and a 20-day delivery window from award. The manufacturer is Cardinal Health 200, LLC, with part number 81-200060, and the NSN is 6515-01-529-0566. The quantity is firm and fixed with zero variance allowed, and the contract specifies the unit of issue and purchase unit in accordance with DLA standards.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

NEEDLE, HYPODERMIC

Solicitation # SPE2DS-26-T-306H

This contract pertains to the procurement of 100 hypo needles, specifically a dental model designated C10A with a 27-gauge size and a length range of 1.125 to 1.50 inches, featuring a threaded design and sterile packaging. The unit of issue is a package containing 100 needles, and the item carries a non-extendable shelf life of 60 months under the RS023 shelf-life requirement for a Type I (Code S) item. Technical and quality specifications referenced under RA001 are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA requirements under RP001, and all supplies must adhere to regulations for removal of government identification if not accepted, as outlined in RQ011. The item is subject to potential covered defense information rules under RD003. The NSN/part number is 6515-00-181-7412, with a single purchase request for one package. Delivery is required within 20 days after order placement. Bidders must clearly identify the source and part number being supplied. The solicitation, issued under SPE2DS-26-T-306H, was posted on August 4, 2026, with bids due by August 10, 2026, for delivery to a military post office in FPO with ZIP 96694, under the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

PAD, NONADHERENT

Solicitation # SPE2DS-26-T-306B

The contract specifies the procurement of sterile, nonadherent Telfa pads measuring 3 inches by 8 inches, packaged in quantities of 50 per unit, with each pad individually sealed in perforated plastic film on both sides. The pads are made of white cotton nonwoven material and must maintain a shelf life of 36 months, with no more than five months elapsed between the manufacturer’s production date and delivery to the government. All packaging must comply with commercial standards as outlined in the procurement document, ensuring each unit is properly sealed and protected from damage, while shipping containers must be suitable for safe, cost-effective delivery via common carrier to the designated delivery point in APO, ZIP 96260-5479. Labeling must adhere to Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and copies of the standard are available through DLA Troop Support. The item is classified as a TYPE 2 (CODE 7) with an extendable 36-month shelf life under RS060, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicability determined by the solicitation or award date. The contract, issued under solicitation SPE2DS-26-T-306B, requires delivery within 84 days, with the NSN 6510-00-986-2942 and one purchase request tied to the order.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

DRESSING, OCCLUSIVE, ADH

Solicitation # SPE2DS-26-T-306P

The contract specifies the procurement of TEGADERM TRANSPARENT DRESSINGS, which are sterile, adhesive, occlusive dressings designed for use on peripheral and central IV catheters or as wound dressings. Each dressing measures 2.375 inches wide by 2.750 inches in length and is individually packaged in units of 100 per package. The product must have a non-extendable shelf life of 36 months, with no more than five months allowed to have elapsed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards, ensuring protection from damage during transit, with exterior shipping containers suitable for safe and cost-effective delivery via common carrier to the specified point of delivery. All items must be marked according to MMS No. 1, and government identification must be removed from non-accepted supplies. The NSN is 6510-01-234-8943, with a single purchase order for one package, requiring delivery within 20 days of award under solicitation SPE2DS-26-T-306P, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF. Bidders must provide the source and part number being offered.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

SPONGE, SURGICAL

Solicitation # SPE2DS-26-T-305U

The contract specifies the procurement of surgical sponges measuring 4 inches by 4 inches, supplied in sealed envelopes containing two sponges each, with twenty-five envelopes per box and twelve hundred sponges per packaging unit. The product must be sterile, have a uniform shelf life of sixty months, and no more than nine months may have passed between the manufacturer’s date and delivery to the government. Labeling must include the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. Packaging must meet commercial standards as outlined in the procurement document, ensuring each unit is sealed and protected from damage, while exterior shipping containers must be suitable for safe transport at the lowest cost to the designated delivery point at Hurlburt Field, Florida. All markings and packaging adhere strictly to Medical Marking Standard No. 1, and suppliers must provide the source and part number being offered. The item is identified by NSN 6510-00-721-9808 with a single purchasing quantity, under solicitation SPE2DS-26-T-305U, response deadline August 10, 2026, and delivery required within twenty days after award. Technical and quality requirements referenced under RP001 and RQ011 are governed by the DLA Master List of Technical and Quality Requirements, and the acquisition is subject to Defense Information potentially applicable under RD003.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

GLOVE, DISPOSABLE

Solicitation # SPE2DS-26-T-307A

The contract is for 8 boxes of disposable bear claw nitrile gloves, each box containing 100 gloves, totaling 800 gloves. The gloves are designed for enhanced grip in both wet and dry conditions, featuring a longer and thicker construction compared to standard gloves, with an extended beaded cuff that provides a form-fitting seal. They are ambidextrous, non-sterile, latex-free, powder-free, and colored sand. The unit of issue is strictly defined as a box of 100, and all supplies must comply with DLA packaging and quality requirements as outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue or award date depending on the acquisition size. Government identification must be removed from any non-accepted supplies per requirement RQ011. The item is identified by NSN 8415-01-600-6039 under purchase request 7017729616, with a delivery deadline of 20 days after order placement. The solicitation, numbered SPE2DS-26-T-307A, was posted on August 4, 2026, with responses due by August 10, 2026. The contract falls under NAICS code 339113 for medical rubber product manufacturing and is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF. Performance is required at Fort Bragg, North Carolina, 28310, with Marc Canalichio designated as the primary point of contact for inquiries via phone or email. The procurement is a federal solicitation accessible through DIBBS.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 10 hours ago

DEADLINE

More opportunities from Department Of Veterans Affairs → 252-NETWORK Contract Office 12 (36C252)

Same awarding agency

Follow-Up Inspection and Retreatment ServicesThe contract entails providing follow-up inspection and retreatment services to evaluate the effectiveness of prior treatments, with a requirement to conduct additional interventions as needed to ensure desired outcomes. All inspections and retreatments must be documented in detailed reports that include findings, actions taken, and specific recommendations for preventing future issues. The work is to be performed at a designated location in Crown Point, Indiana, with a zip code of 46307-7745. This subcontract is classified under NAICS code 561710, indicating it relates to extermination and pest control services. The opportunity was posted on August 3, 2026, and responses are due by August 10, 2026, at 3:00 PM. The contracting entity is the Department of Veterans Affairs through the 252-NETWORK Contract Office 12.

Exterminating and Pest Control Services

POSTED

DEADLINE

Non-Toxic Pest Treatment ServicesThe contract titled Non-Toxic Pest Treatment Services requires the execution of definitive pest control measures using only non-toxic or low-toxicity methods, strictly during non-patient hours to ensure the safety and well-being of individuals within the healthcare environment. All work must adhere to the highest standards set by the Environmental Protection Agency, Occupational Safety and Health Administration, Centers for Disease Control and Prevention, and facility-specific infection control protocols to maintain a sterile and hazard-free setting. The services are to be performed at a designated location in Crown Point, Indiana, with a zip code of 46307-7745, and must be completed in full compliance with federal and institutional guidelines governing pest management in sensitive healthcare facilities. This is a subcontract opportunity under the NAICS code 561710, issued by the Department of Veterans Affairs through the 252-NETWORK Contract Office 12, and it was posted on August 3, 2026. Responses are due by August 10, 2026, at 3:00 PM, and the contract does not specify a set-aside type or designated small business preferences. The place of performance is fixed, and no point of contact information is provided within the contract data, requiring proposers to consult the official SAM.gov link for additional procedural details and submission requirements.

Exterminating and Pest Control Services

POSTED

DEADLINE

Emergency Pest Inspection and Response ServicesThe contract requires 24/7 emergency pest response services specifically for bed bug and tick infestations at a VA clinic located in Crown Point, Indiana, with a strict requirement to respond on-site within four hours of notification. Services include comprehensive on-site assessments, accurate pest identification, immediate isolation of affected areas to prevent spread, and development of tailored treatment plans to effectively eliminate infestations while minimizing disruption to clinic operations. The work is classified under NAICS code 561710, indicating it falls under pest control services, and is structured as a subcontract with no set-aside designation applied. The solicitation was posted on August 3, 2026, and responses are due by August 10, 2026, at 3:00 PM. The contracting office is the 252-NETWORK Contract Office 12 under the Department of Veterans Affairs, and performance is limited to the specified location in Crown Point with ZIP code 46307-7745. While no point of contact is listed, the opportunity is accessible via the SAM.gov portal for interested vendors to review full solicitation details and submit proposals.

Exterminating and Pest Control Services

POSTED

DEADLINE

Emergency Manual Lowering Devices and Safety ComponentsThe contract seeks the supply of red emergency manual lowering cords and associated safety hardware designed to enable controlled descent of elevators or mechanical systems during power failures or other emergency situations. These components must meet stringent safety and reliability standards to ensure user protection under critical conditions, with the red cords serving as a clear, standardized visual indicator for emergency use. The hardware includes all necessary fittings, anchors, brakes, and tensioning mechanisms required to safely lower occupants or equipment without reliance on electrical power. This is a subcontract awarded under the NAICS code 339112, which pertains to medical equipment and supplies manufacturing, indicating the technical precision expected for devices used in healthcare and institutional environments. The solicitation was posted by the Department of Veterans Affairs through the 252-NETWORK Contract Office 12, with responses due by August 15, 2026. While the place of performance and point of contact details are not specified, the procurement is tied to federal infrastructure requiring certified safety systems. The contract emphasizes compliance with safety regulations and may involve interoperability with existing emergency systems in VA facilities to ensure seamless integration and operational readiness.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Battery Systems for Ceiling LiftsThe contract is for the supply of rechargeable battery systems designed to support up to 120 transfers per charge at a capacity of 200 pounds each, specifically for use with ceiling lifts in medical settings. These battery systems must comply with IEC 6100-1-2 lifecycle standards to ensure safety, durability, and consistent performance under medical-grade operational demands. The procurement is structured as a subcontract under the Department of Veterans Affairs, managed by the 252-NETWORK Contract Office 12, with a posted date of August 3, 2026, and a firm deadline for responses on August 15, 2026, at 4:59 a.m. The NAICS code 335911 identifies the industry as other electrical equipment and component manufacturing, indicating the technical specificity required of the supplier. Performance location and detailed contact information are not provided, but all submissions must adhere to federal procurement guidelines and be completed through the designated SAM.gov portal.

Storage Battery Manufacturing

POSTED

DEADLINE

High-Strength Aluminum Ceiling Track SystemsThe contract pertains to the supply of double-rail continuous charge track systems manufactured from high-strength extruded aluminum, specifically engineered for ceiling mounting in healthcare environments. These systems must meet ISO 10535 deflection standards to ensure structural integrity and safety under operational loads, making them suitable for applications requiring reliable patient mobility support. The design emphasizes durability, smooth operation, and compatibility with medical equipment integration, tailored to the demanding standards of clinical settings. The solicitation is listed as a subcontract under NAICS code 332312, indicating a focus on architectural and structural metals manufacturing. It was posted on August 3, 2026, with a response deadline of August 15, 2026, at 4:59 a.m. The contracting office is the 252-NETWORK Contract Office 12 (36C252) under the Department of Veterans Affairs, though no specific place of performance or point of contact is provided. Interest is solicited through the SAM.gov platform, and bidders must adhere to the technical specifications and compliance requirements outlined for healthcare-grade track systems.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Ceiling Lift Motors with Integrated Class III ScaleThe contract solicits the supply of ceiling lift motors with a 770-pound capacity, equipped with an integrated Class III medical scale and essential safety mechanisms such as an emergency brake and low-battery shutdown features. These devices are designed for use in healthcare settings, ensuring safe and accurate patient handling with built-in weighing capabilities to support clinical decision-making. The product must meet stringent medical standards and reliability requirements to ensure consistent operation in critical environments. This subcontract opportunity, issued by the Department of Veterans Affairs through the 252-NETWORK Contract Office 12, is open for responses until August 15, 2026, with the solicitation posted on August 3, 2026. The North American Industry Classification System code 339112 indicates that the work falls under miscellaneous medical and dental equipment manufacturing. While the place of performance and point of contact are not specified, interested parties should submit proposals through the official SAM.gov portal before the deadline to ensure consideration.

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

Insufficient Data to Identify Subcontract OpportunitiesThe contract is identified as a subcontract opportunity with a Service-Disabled Veteran-Owned Small Business Set-Aside designation, as defined under FAR 19.14, aiming to prioritize contracting with businesses owned by service-disabled veterans. It was posted on August 3, 2026, with a response deadline of August 10, 2026, and is managed by the 252-NETWORK Contract Office 12 within the Department of Veterans Affairs. No Statement of Work, Contract Line Item Numbers, pricing details, or specific project requirements were provided, making it impossible to identify actionable subcontract or supplier opportunities. The solicitation number is not available, and key data such as NAICS code, organization type, point of contact, and place of performance are all unspecified. The official link to the opportunity is accessible through SAM.gov, but the absence of essential details limits the ability of potential bidders to prepare meaningful proposals.

POSTED

DEADLINE

AN11--36C25226R0084 - TBI research with Arraystar Inc FY2026

Solicitation # 36C25226R0084

The Department of Veterans Affairs is seeking information from potential vendors to support a sole source procurement for Methylated and hydroxymethylated DNA immunoprecipitation sequencing (MeDIP-seq and hMeDIP-seq) services under solicitation number 36C25226R0084. This effort is part of a TBI research project at the William S Middleton VA Medical Center in Madison, Wisconsin, aimed at understanding epigenetic changes—specifically the roles of 5-methylcytosine and 5-hydroxymethylcytosine—in secondary brain damage following trauma. The contract requires comprehensive sequencing and data analysis of mouse brain tissue samples from adult and aged males and females to identify sex- and age-specific patterns. The work must be performed using the same tissue samples for both MeDIP and hMeDIP to minimize variability and ensure reliable comparative results. The vendor will deliver raw sequencing data in Fastq format, quality control reports, analytical summaries, and final project reports in Excel, PDF, and PNG formats within 56 to 70 days of contract start. Submission of capability statements is required by August 10, 2026, via email only, with no phone inquiries accepted, and must include customer references and technical proof of capability. This is not a solicitation or request for proposals but a sources sought notice to justify a sole source award under 41 U.S.C. 1901, as the VA believes only one vendor can meet the highly specialized scientific requirements. The principal investigator will evaluate all submissions due to the technical nature of the research and will determine vendor suitability. The contract, if awarded, will be a firm fixed price agreement for one year, with no option periods, running from August 10, 2026, to August 9, 2027. All deliverables must be transmitted via USB drive, as the research laboratory operates in an affiliate space disconnected from the VA network. Responses must be emailed to Tiarrah Turner at the VA Great Lakes Acquisition Center in Milwaukee, Wisconsin, with attachments not exceeding 8 MB each. The government retains full discretion to proceed with sole source negotiation regardless of responses received. No federal funds are allocated under the Recovery Act for this procurement.

Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

DEADLINE

Z1DA--578-26-016 Donation Renovations Building 217 Phase 2 CON

Solicitation # 36C25226B0028

The Edward Hines Jr. VA Hospital in Hines, Illinois, is seeking contractors for renovations to the Community Living Center (Building 217) under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside. This project involves significant updates including construction of a new enclosed Dementia Unit, renovations to the dining room and various rooms such as equipment, nourishment, family, high fall risk, and bariatric rooms, as well as creating a large group room with a collapsible wall. Additional work includes demolishing the front entrance playground and reseeding the lawn, replacing all flooring in the building, and installing 18-gauge sheet metal behind perimeter room walls. The renovation work is planned to be phased carefully to minimize disruption to daily operations. The solicitation, valued between $5 million and $10 million, will be issued around mid-May 2026 with bids due by mid-July 2026. The contract will be divided into three separate CLINs, each priced and phased separately, with a total performance period of 740 calendar days following the Notice to Proceed, which is expected about two weeks after award. Contractors are required to verify all dimensions and conduct a pre-construction inspection to document existing site conditions. Interested parties must be certified SDVOSB firms compliant with VA requirements, and a pre-bid conference will be held to provide further project details. The solicitation documents and updates will be available on SAM.gov.

Commercial and Institutional Building Construction

POSTED

DEADLINE

6515--Sources Sought - Ceiling Lift - Milwaukee VAMC

Solicitation # 36C25226Q0652

The U.S. Department of Veterans Affairs, through the NCO 12 Great Lakes Acquisition Center in Milwaukee, Wisconsin, is conducting market research to assess the availability of qualified suppliers capable of providing ceiling lift systems for the Milwaukee VAMC. This solicitation seeks responses from Service Disabled Veteran Owned Small Businesses, Veteran Owned Small Businesses, Small or Emerging Small Businesses, and Other Than Small Business firms that can deliver fully compliant ceiling lift units along with associated components. The required equipment includes two ceiling lifts with a minimum 770-pound weight capacity per unit, powered by a gear-reduced, high-torque horizontal axis motor featuring integrated Class III weighing functionality, electronic soft-start and soft-stop controls, emergency manual lowering with a red cord, emergency stopping mechanisms, current limiting, low-battery motor shutdown, and an emergency brake. The lifts must be compatible with specific Guldmann sling types, include VO plastic fire-retardant cabs meeting UL 94 standards, secure hand controller storage, and clearly labeled safe working loads. Batteries must support up to 120 transfers at 200 pounds per charge and comply with IEC 6100-1-2 lifecycle standards. The system must also include two basic high slings meeting ISO 10535 Appendix A safety and cradle requirements, rated for at least 770 pounds, and two four-suspension-point hanger bars compatible with the lift straps. Two double-rail continuous charge track systems with bathroom access are required, constructed of high-strength extruded aluminum and anchored to the ceiling substrate with security testing to 1.5 times the motor’s weight capacity, and deflection must not exceed 1/16th inch per 7.87 inches of track length per ISO 10535. Interested vendors must submit a written response including company details, point of contact, FSS/SEWP contract number, SAM Unique ID, tax ID, business classification, a capability statement demonstrating qualifications, and written authorization from the manufacturer confirming distributor status along with the manufacturer’s location. Responses must be sent to Matthew Hohl at Matthew.Hohl@va.gov no later than 11:59 PM Central Standard Time on July 21, 2026, with solicitation number 36C25226Q0652 referenced on all correspondence. This is a sources sought notice only, not a request for quotes, and responses will be used solely to inform future acquisition

Surgical and Medical Instrument Manufacturing

POSTED

DEADLINE

S207--Reactive Emergency Pest Mitigation Services for Bed Bugs and Ticks for the Adam Benjamin Jr., VA Outpatient Clinic, Crown Point, Indiana

Solicitation # 36C25226Q0651

The Department of Veterans Affairs is conducting market research through a Sources Sought Notice to identify qualified businesses capable of providing reactive emergency pest mitigation services for bed bugs and ticks at the Adam Benjamin Jr. VA Outpatient Clinic in Crown Point, Indiana. The requirement falls under NAICS Code 561710 and Product Service Code S207, targeting specialized pest control within a healthcare setting. Businesses must demonstrate the ability to respond on-site within four hours, 24/7/365, and hold a valid Indiana Pest Control Business License with proven experience in healthcare environments. Participation is voluntary, with no obligation or financial liability from the government, and no solicitation or quotation request is currently active. Interested parties must submit their business information—including name, address, contact details, SAM Unique Entity Identifier, business size, certification status as a small business, SDVOSB, or VOSB, licensing confirmation, and response-time capability—by 10:00 a.m. local time on Monday, August 10, 2026, via email to Contract Specialist Rob Knight at Robert.Knight1@va.gov. Telephone inquiries will not be accepted, and no feedback will be provided beyond confirmation of receipt. The government will use the responses to assess market capacity and determine whether the requirement will be set aside for veteran-owned or small businesses or conducted through full-and-open competition.

Exterminating and Pest Control Services

POSTED

DEADLINE