Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Microfiltration Module Supply and Fabrication

Active

State & Local

Response Deadline11/04/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply and fabrication of specialized microfiltration modules for water treatment projects managed by the Swansea Water District in Massachusetts. The selected contractor is responsible for the end-to-end process of preparing and submitting detailed shop drawings for approval, fabricating the equipment according to those approved plans, and providing all necessary certified shop drawings and fabrication certifications. The scope of work concludes with the delivery of the completed microfiltration modules to the project site located on Wilbur Avenue in Swansea. Interested parties must adhere to the response deadline of November 4, 2026, for this procurement opportunity categorized under NAICS code 336612.

General Info

Contract for fabricating and delivering microfiltration modules to Swansea Water District by November 2026.

Agency

Massachusetts → Swansea Water District

NAICS

336612 - Boat Building

Place of Performance

Wilbur Avenue Swansea, MA, 02777, USA

Set-Aside

NONE

Documents

This scope was carved out of BD-19-1236-SWD01-SWD01-134317.

The full solicitation package (16 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Request Sealed Bids for Microfiltration Module Replacement

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 12

subcontract

Response DeadlineNov 4

Submission deadline

Response Deadline

11/04/2026, 07:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyMassachusetts → Swansea Water District

ContactsNo contacts available

OfficeN/A

Organization / AgencyMassachusetts → Swansea Water District

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and fabricates specialized microfiltration modules for prime contractors on Swansea Water District water treatment projects. Prepares and submits detailed shop drawings for approval and fabricates equipment according to approved plans. Provides certified shop drawings and fabrication certifications. Delivers fabricated microfiltration modules to the project site.

Similar Contracts

Same NAICS industry code

Manufacture of Cable Assembly AB and Cable TC9007-2This subcontract through the Department of Defense and DLA Mechanicsburg involves the manufacture of custom cable assemblies for prime contractors supporting Naval Surface Warfare Center projects. The scope of work specifically requires the fabrication of Cable Assembly AB and Cable TC9007-2 in strict accordance with drawings 8290958 and 8290586 under CAGE 53711. The contractor must maintain rigorous compliance with Department of Defense item unique identification reporting and DODISS standards. Additionally, the provider must demonstrate the capability to manage NOFORN specifications via DD Form 1425 to ensure the secure handling of sensitive information throughout the delivery of the completed assemblies.

SPRMM1 DLA Mechanicsburg

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Manufacture and Supply of Check Valves (NIIN 016579547)This subcontract involves the manufacture and supply of 18 check valves (NIIN 016579547) for prime contractors supporting U.S. Navy NAVSUP projects. The contractor is responsible for fabricating the units according to Cage Code 34228 design 8590952-D1217483 and Technical Data Package Version 005, utilizing precision machining to ensure all specific tolerances are met. The agreement requires strict adherence to regulatory standards, including Buy American compliance and the provision of MSDS documentation per OSHA and FED STD 313. Additionally, the contractor must obtain source approval as outlined in the NAVSUP Philadelphia brochure. This project is managed under the Department of Defense via the Navsup Weapon Systems Support Mech agency.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month

TORQUE ASSIST ASSEM

Solicitation # N0010426QYA3Y

Solicitation NO0104-26-Q-YA3Y is a fixed-price requirement issued by NAVSUP Weapon Systems Support Mech for the teardown, evaluation, repair, and potential modification of the Torque Assist Assembly (NSN 7HH 2040-01-088-4976). The project is tied to the FY26 S&OP project with a planned award in FY27. The government intends to make a single award based on a trade-off where past performance is considered more important than price. Evaluation of past performance will utilize the DoD Supplier Performance Risk System (SPRS) color ratings. The contractor must adhere to strict quality and technical standards, including MIL-STD-130 for marking, MIL-STD-2073 for packaging, and ANSI/ESD S20.20 for electrostatic discharge control. A critical requirement is the total absence of metallic mercury in the supplied materials. Performance is measured by the Repair Turnaround Time (RTAT), calculated from the physical receipt of the asset in the Commercial Asset Visibility (CAV) system to the date of government acceptance. Government Source Inspection (GSI) is required, and all freight is handled as FOB Origin. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. The extended deadline for quote submission is December 4, 2026, at 4:30 PM local time.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month

SEGMENT #7 STERN

Solicitation # N0010427QLA16

This solicitation, issued by the Navsup Weapon Systems Support Mech, is a request for quotation for the manufacture and delivery of one Segment #7 Stern (NSN 3HD 1940-01-676-6351). The item must be produced according to specific design references associated with Cage Code 66618. The government requires source inspection and acceptance at the origin, with delivery expected within 30 days of award, although accelerated delivery is encouraged. All freight is handled as FOB Origin, with the final destination being the DLA Distribution facility in New Cumberland, Pennsylvania. The award process utilizes a trade-off method where past performance is weighted as more important than price. Offerors must comply with strict quality and marking standards, including MIL-STD-130 for physical identification and MIL-STD-2073 for packaging. Additionally, the contract incorporates Buy American and Free Trade Agreement requirements, and mandates the use of the Wide Area WorkFlow (WAWF) system for invoicing and receiving reports. Only authorized distributors of the original manufacturer will be considered for award, and they must provide proof of authorization on company letterhead.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Solicitation # N0010426QYAJZ

This competitive solicitation, number N00104-26-Q-YAJZ, is issued by NAVSUP Weapon Systems Support for the manufacture of Gland Actuators for use on Navy submarines. The requirement is for three units under NAICS code 336612, with the award to be made to the lowest price technically acceptable (LPTA) offeror. The actuators must be manufactured from Nickel-Aluminum-Bronze material per ASTM B150/B150M and adhere to strict technical specifications, including the use of Type I Hex Cap screws per MIL-DTL-1222 and QPL-qualified O-rings. A critical requirement of this contract is that all materials must be mercury-free to prevent corrosion and toxicity risks on naval vessels. The contract mandates a rigorous quality assurance process, including a mandatory first article testing and inspection phase that requires government approval before production begins. The supplier must maintain a quality system compliant with ISO 9001 or MIL-I-45208 and provide comprehensive objective quality evidence, such as certified mill certifications and NDT liquid penetrant inspection reports. Final acceptance and inspection will occur at the origin via DCMA-QAR. Payments and receiving reports are to be processed electronically through the Wide Area WorkFlow (WAWF) system. Packaging must comply with MIL-STD-2073-1, and shipments are destined for DLA distribution facilities in Pennsylvania and California.

Navsup Weapon Systems Support Mech

POSTED

about 4 hours ago

DEADLINE

in about 1 month

Galvanized Boat TrailerThis subcontract opportunity, managed by DAS Procurement for the State of Connecticut, involves the fabrication and delivery of a specialized galvanized steel tandem axle trailer. The equipment is specifically designed to support electrofishing vessels used in CT DEEP Fisheries Division projects, requiring precise weight and capacity specifications, the installation of rollers, and the integration of waterproof LED lighting within waterproof housings. The project falls under NAICS code 336612 and is intended for prime contractors operating on these division projects. Interested parties must submit their responses by the deadline of November 12, 2026, to provide the completed trailer as specified in the contract requirements.

DAS Procurement

POSTED

about 4 hours ago

DEADLINE

Electrofishing Boat Hull & AssemblyThis subcontract, managed by DAS Procurement for the State of Connecticut, involves the fabrication and assembly of an 18-foot boat hull intended for use in CT DEEP Fisheries Division projects. The scope of work requires the contractor to either procure or build the vessel and perform specific installations, including a console seat and a jack plate designed to enable shallow water operations. All materials and processes must adhere to Environmentally Preferable Products standards to ensure environmental compliance. The project is categorized under NAICS code 336612 and requires the delivery of a fully assembled vessel. Interested parties must submit their responses by November 12, 2026, following the posting date of October 28, 2026. The final deliverable is a complete 18-foot boat hull equipped with the specified console and jack plate for the prime contractor.

DAS Procurement

POSTED

about 4 hours ago

DEADLINE

LCU 1600 Class Marine Propeller ManufactureThis subcontract involves the manufacture of eight Left Hand LCU 1600 Class Marine Propellers for prime contractors under DLA supply contracts. The scope of work includes fabrication and casting according to NAVSEA Drawing 245-5110169, followed by precision machining to meet specific drawing tolerances. The project requires the use of large-scale precision casting equipment and materials that comply with the Buy American Act, while adhering to ANSI/EIA-649-A configuration management standards. Managed by the Department of the Navy through SPRMM1 DLA Mechanicsburg, the contract is designated as an SBA set-aside under NAICS code 336612. The performance of the contract will take place in Mechanicsburg, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline of December 14, 2026, for the delivery of the completed propellers identified by NSN 2010-01-607-6494.

SPRMM1 DLA Mechanicsburg

POSTED

about 12 hours ago

DEADLINE

in about 2 months

High-Grade Bearing Steel SupplyThis subcontract, titled High-Grade Bearing Steel Supply, involves the procurement of raw specialty steel for prime contractors working on Department of the Navy bearing projects. The scope of work requires the sourcing and delivery of high-carbon chromium steel, specifically AISI 52100 or an equivalent material, that adheres to the metallurgical standards set by MIL-B-17931E. To ensure quality and regulatory adherence, the provider must supply mill test reports and material certifications confirming compliance with Buy American and Trade Agreements-Basic requirements. Managed by the Navsup Weapon Systems Support Mech, the contract is categorized under NAICS code 336612. Performance of the contract will take place in Mechanicsburg, Pennsylvania. Interested parties must submit their responses by the deadline of December 3, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Supply of ASTM-B21 Alloy C46400 MaterialThis subcontract involves the procurement and delivery of certified ASTM-B21 Alloy C46400 raw material stock for prime contractors supporting Navsup Weapon Systems Support Mech projects. The materials are specifically intended for the fabrication of Stuffing Box Plugs and must be accompanied by comprehensive quantitative chemical and mechanical analysis certifications to ensure compliance with technical standards. The project is managed under the Department of the Navy with performance taking place in Mechanicsburg, Pennsylvania. Interested parties must adhere to the response deadline of November 27, 2026, for this requirement categorized under NAICS code 336612.

Navsup Weapon Systems Support Mech

POSTED

about 12 hours ago

DEADLINE

in about 1 month

Public Safety Center Console Boat

Solicitation # IFB27-012

Glynn County, Georgia, through its Emergency Management Agency, is soliciting bids under IFB27-012 for the procurement of one new, current-production-year public safety center console vessel. The vessel is intended for law enforcement, search and rescue, emergency response, and disaster recovery operations within the county's coastal, tidal, and riverine environments. The required turnkey solution must include an approximately 23-foot vessel with a fiberglass hard-shell T-top, a propulsion system with at least 200 horsepower and hydraulic steering, a suitable trailer, and all necessary electronics, rigging, and navigation equipment. The successful contractor is also required to provide comprehensive orientation and training for county personnel along with all operation and maintenance documentation. Bids must be submitted electronically via the county's e-procurement portal by 1:30 pm on November 4, 2026. The contract will be awarded to the lowest responsive and responsible bidder based on a lump sum price, though a local vendor preference may apply if a qualified local bidder is within a specific price range of the lowest bid. Required submission documents include a W9, representation affidavit, legal and character qualifications, a supplier oath, a statement of assurance regarding non-discrimination, and at least three professional references. Delivery is FOB Destination to the Glynn County Emergency Management and Homeland Security agency, with payment terms set at thirty days following equipment acceptance.

EMERGENCY MANAGEMENT AGENCY

POSTED

about 20 hours ago

DEADLINE

Marine-Grade Epoxy and Sealant SupplyThis subcontract for Marine-Grade Epoxy and Sealant Supply involves the provision of specialized saltwater-resistant epoxy injection resins and crack sealing compounds for prime contractors working on City of St. Petersburg pier projects. The scope of work includes the delivery of materials to the project site along with all necessary technical data sheets and safety data sheets. To ensure quality and durability in marine environments, the supplier must provide manufacturer certification specifically for marine applications. This opportunity is managed by Enterprise Facilities in Florida, with a response deadline set for November 5, 2026.

Enterprise Facilities

POSTED

about 20 hours ago

DEADLINE

More opportunities from Massachusetts → Swansea Water District

Same awarding agency

Microfiltration Module Installation ServicesThis subcontract for Microfiltration Module Installation Services involves supporting prime contractors on water treatment projects for the Swansea Water District in Swansea, Massachusetts. The scope of work includes the removal of old microfiltration modules and the installation of new replacements into the existing system, followed by comprehensive integration and testing to ensure a fully operational system. The project requires the use of specialized rigging and hoisting equipment for the precise placement of modules. Interested parties should note that the solicitation was posted on October 12, 2026, with a response deadline of November 4, 2026. The work falls under NAICS code 238220 and will be performed at the Wilbur Avenue location.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Request Sealed Bids for Microfiltration Module Replacement

Solicitation # BD-19-1236-SWD01-SWD01-134317

The Swansea Water District is requesting sealed bids for the replacement of microfiltration modules at its Desalination Facility in Swansea, Massachusetts. This lump sum contract requires the manufacturer to provide modules that are direct replacements for existing Pall Corporation units and compliant with ANSI/NSF Standard 61 for drinking water system components. The selected contractor must provide a ten-year pro-rated warranty on membrane performance and is responsible for the proper disposal of glycerin or preservatives used during transport. Additionally, any excess materials, including tips and specific components, must be returned to Pall Corporation following installation. The contract includes a structured payment schedule: 5% upon submittal of shop drawings, 15% upon approval of shop drawings, 30% upon certification of fabrication, 30% upon delivery and installation, and 20% upon completion of start-up. The manufacturer is required to provide a representative for at least two days to verify installation and a minimum of two days for initial start-up and testing. Bidders must provide proof of public liability insurance of at least $1,000,000 per accident, Massachusetts-compliant workers compensation, and signed certifications regarding tax compliance and non-collusion. The deadline for responses is November 4, 2026.

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Marine-Grade Upholstery and Storage

EMERGENCY MANAGEMENT AGENCY

POSTED

DEADLINE

in about 2 hours

Center Console Public Safety Vessel Hull Supply

EMERGENCY MANAGEMENT AGENCY

POSTED

DEADLINE

in about 2 hours

Floating Dock Supplier

Procurement Services

POSTED

DEADLINE

Water and Sewer Pipe Material Supplier

Bartow County Government

POSTED

DEADLINE

Aggregate Supply

CPPJ Road, Bridge, & Utility

POSTED

DEADLINE

Ductile Iron Water Pipe and Fittings Supply

COE01 - PURCHASING

POSTED

CLOSED

Marine Platform and Support Vessel Provision

Town of Edgartown

POSTED

CLOSED

about 2 hours ago

Aluminum Boat Trailer Supplier

Florida Fish and Wildlife Conservation Commission

POSTED

DEADLINE

Carolina Skiff E21 DLX CC Hull Supplier

Florida Fish and Wildlife Conservation Commission

POSTED

DEADLINE

Supply of #57 Stone

Virginia Department of Wildlife Resources

POSTED

CLOSED

Floating Dock Equipment Supplier

City of Watsonville

POSTED

DEADLINE

OCA POL | 14-Foot Rigid Hull Inflatable Vessel

Solicitation # SFGOV-0000012144

San Francisco Police Department

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS