Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Multiplexer Repair Services

Active

Federal

Response Deadline10/13/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Multiplexer Repair Services involves the technical repair and functional restoration of Multiplexer assemblies for prime contractors supporting NAVSUP Weapon Systems Support Mechanicsburg projects. The scope of work includes troubleshooting multiplexing circuitry and repairing signal routing components, which requires the use of specialized equipment such as spectrum analyzers and signal generators. The selected provider must maintain authorized repair source status to ensure all technical standards are met. Compliance with military specifications is mandatory, specifically requiring marking according to MIL-STD-130 and packaging per MIL-STD-2073. The final deliverable is the fully repaired Multiplexer. This opportunity falls under NAICS code 811210 and is associated with the Department of Defense.

General Info

Subcontract for technical repair of Multiplexer assemblies following military specifications for the DoD.

Agency

Department Of Defense → Navsup Weapon Systems Support Mech

NAICS

811210 - Electronic and Precision Equipment Repair and Maintenance

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of N0010427QTA02.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MULTIPLEXER

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 7

subcontract

Response DeadlineOct 13

Submission deadline

Response Deadline

10/13/2026, 08:30:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Navsup Weapon Systems Support Mech

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs technical repair and functional restoration of Multiplexer assemblies for prime contractors on NAVSUP Weapon Systems Support Mechanicsburg projects. Troubleshoots multiplexing circuitry and repairs signal routing components. Requires signal generators, spectrum analyzers, and authorized repair source status. Performs marking per MIL-STD-130 and packaging per MIL-STD-2073. Delivers repaired Multiplexer.

Similar Contracts

Same NAICS industry code

Main Fuel Control Repair ServicesThis subcontract involves the technical repair and overhaul of a Main Fuel Control unit, part number L16716P25, supporting the GR1 Weapon system for Navsup Weapon Systems Support Mech. The scope of work includes the disassembly, inspection, and repair of the unit in strict accordance with MIL-STD-973 Configuration Management standards. A critical requirement of the process is ensuring that all units are completely free from metallic mercury contamination. The selected provider must maintain authorized repair facility status and demonstrate full compliance with DFARS and CMMC cybersecurity standards. The final deliverable for this project is one repaired and certified unit. Performance will take place in Mechanicsburg, Pennsylvania, with a response deadline set for November 6, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

EMG Equipment Maintenance and Support ServicesThis subcontract for EMG Equipment Maintenance and Support Services involves providing specialized technical support and agreement-based servicing for Cadwell Electromyography systems at the Louis Stokes Cleveland VA Medical Center. The scope of work includes performing preventative maintenance, calibration, software updates, and technical troubleshooting to ensure the systems remain fully operational. Managed under the Department of Veterans Affairs Network Contract Office 10, the contract requires the service provider to hold factory authorization or certification from Cadwell Laboratories, Inc. The project falls under NAICS code 811210 and is designed to support prime contractors in maintaining critical medical facility equipment.

250-NETWORK Contract Office 10 (36C250)

POSTED

about 13 hours ago

DEADLINE

Optical Sensor Calibration SpecialistThe Optical Sensor Calibration Specialist subcontract involves providing specialized calibration services for sun photometers and spectrometers supporting prime contractors on NASA Goddard Space Flight Center projects. The scope of work requires calibrating sun photometers every 12 to 18 months following the standard AERONET method, while spectrometer sensor heads must be calibrated every six months. All work must be validated against NASA and AERONET requirements to ensure instrument accuracy. Managed through the NASA Shared Services Center under NAICS code 811210, the contractor is responsible for delivering formal calibration certificates and validated instrument status reports. The opportunity was posted on October 7, 2026, with a response deadline of October 12, 2026.

NASA Shared Services Center

POSTED

about 13 hours ago

DEADLINE

Diesel Engine Governor Repair and Overhaul ServicesThis subcontract for the Department of Defense involves providing repair and overhaul services for diesel engine governors supporting Navsup Weapon Systems Support Mech projects. The scope of work includes the complete teardown, evaluation, and repair of units according to OEM specifications and technical orders, followed by rigorous functional testing. The final deliverable is a repaired Diesel Engine Governor, identified by NSN 7HH 2910-01-518-5319, which must meet A-condition stock standards. To qualify for this project, the contractor must possess a CMMC unique identifier and have access to the necessary calibration tooling. The opportunity is categorized under NAICS code 811210, with a response deadline set for October 22, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Onsite System Integration and Operator Training

NASA Shared Services Center

POSTED

about 13 hours ago

DEADLINE

Rotary Pump Repair and Overhaul ServicesThis subcontract for the Department of Defense involves providing full technical repair and overhaul services for Rotary Pumps (NIIN: 015125098) in support of Navsup Weapon Systems Support Mech projects. The selected contractor is responsible for executing all repairs according to specific technical orders and drawings using specialized rotary pump tooling. The final deliverables must be fully repaired, tested, and marked in accordance with CMIL-STD-130, REV N, and packaged following MIL-STD-2073 and MIL-P-16749 standards. The project falls under NAICS code 811210 and requires the contractor to support Government Source Inspection to ensure quality and compliance. Interested parties should note the response deadline of October 14, 2026. The primary objective is the delivery of fully operational, certified rotary pumps that meet all specified military standards and technical requirements.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Bowl Assembly Repair and Overhaul ServicesThis subcontract for Bowl Assembly Repair and Overhaul Services supports Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves the disassembly, cleaning, inspection, and reassembly of NIIN 002185956 using specialized tooling to deliver a fully functional Bowl Assembly. All work must be executed according to contractor standard practices and TDP Version O06, adhering to CAGE Code 14XU7 and Reference No. AE2023-29. The contract falls under NAICS code 811210 and mandates strict adherence to DFARS 252.204-7012 and CMMC compliance standards. Interested parties should note the response deadline of October 14, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Check Valve Repair and Overhaul ServicesThis subcontract for Check Valve Repair and Overhaul Services involves the teardown, evaluation, and repair of 46 check valves under NSN 4820-01-224-4688 for prime contractors supporting Navsup Weapon Systems Support Mech projects. The scope of work includes disassembling the valves to assess wear, executing repairs according to contractor standard practices and technical orders, and conducting pressure and functional testing based on manufacturer specifications. The project requires strict adherence to MIL-STD-130 for marking and falls under NAICS code 811210. Managed by the Department of Defense, the contract requires the delivery of fully repaired and tested units. The solicitation was posted on October 7, 2026, with a response deadline of October 27, 2026.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

J065--Cadwell EMG Support Agreement Intent to Sole Source For Louis Stokes Cleveland VA Medical Center

Solicitation # 36C25027Q0028

The Department of Veterans Affairs, Veterans Health Administration, Network Contracting Office 10, intends to negotiate a sole source, firm-fixed price contract for a Cadwell EMG Support Agreement. This acquisition is specifically for the Louis Stokes Cleveland VA Medical Center located in Cleveland, Ohio. The government intends to award the contract to Cadwell Laboratories, Inc., identified by SAM UEI QNE2HHANKR23, as it is believed that this candidate is the only source possessing the required capabilities to successfully meet the requirement. This action is being conducted in accordance with FAR Subpart 13.2 and NAICS code 811210. This notice serves as a publication of the proposed contract action per FAR 5.201(b)(1) and is not a formal request for competitive proposals or a solicitation. However, under FAR 5.207(c)(16)(ii), other contractors may submit a capabilities statement or quotation to Contracting Officer Sara Wood via email by October 15th at 10:00 a.m. Eastern Time. Any such response must provide clear and convincing evidence that competition would be advantageous to the government. Additionally, the contract includes a specific deviation regarding the prohibition of racially discriminatory diversity, equity, and inclusion activities by federal contractors.

250-NETWORK Contract Office 10 (36C250)

POSTED

about 13 hours ago

DEADLINE

59--CIRCUIT CARD ASSEMB, IN REPAIR/MODIFICATION OF

Solicitation # N0010425QDE08

Solicitation NO00104-25-Q-DE08, issued by NAVSUP Weapon Systems Support Mech, is a small business set-aside for the repair of 70 circuit card assemblies (NSN 5998-015295211, Ref NR 1715296-101). The government intends to solicit this requirement from a single source under FAR 6.302-1, as it has been determined uneconomical to purchase the technical data or reverse engineer the part. All repair work must adhere to the contractor's standard overhaul practices and meet the operational requirements of CAGE Code 072E5 and TDP Version 008. The contract has transitioned from Simplified Acquisition Procedures to Contracting by Negotiation procedures under FAR Part 15. Award will be made to the responsible offeror determined to be most advantageous to the government, with past performance weighted as more important than price. Evaluation of past performance may utilize the DoD Supplier Performance Risk System color ratings. Key deliverables include the repaired assemblies delivered within 67 days to DLA Distribution New Cumberland, PA, with packaging and marking strictly following MIL-STD-2073 and MIL-STD-129. Inspection and acceptance will occur at the origin, and Government Source Inspection is required. Payment will be processed electronically via the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

about 13 hours ago

DEADLINE

Steris Sterilizer Maintenance/Service at Offutt AFB, NE

Solicitation # HT940726Q0001

The Defense Health Agency Contracting Activity Central Division is soliciting quotations for a single-award, Firm-Fixed-Price commercial service contract to provide comprehensive maintenance and repair services for Government-owned Steris sterilization and washer equipment. Located at the 55th Medical Group, Ehrling Bergquist Clinic at Offutt Air Force Base, Nebraska, the scope of work includes scheduled preventive maintenance, safety inspections, calibrations, annual chamber cleanings, and unscheduled emergency repairs. Covered equipment consists of three Steris AMSCO 400 Steam Sterilizers, one Steris Reliance Vision Single Chamber Washer Disinfector, two Steris AMSCO 7052HP Single Chamber Washer Disinfectors, and two Steris IWECO5 Ultrasonic Instrument Washers. All services must be performed by certified technicians using genuine Original Equipment Manufacturer parts and software. This procurement is a 100 percent Total Small Business Set-Aside under NAICS codes 811210 and 811211. The anticipated period of performance includes a 12-month base period, four 12-month option periods, and a potential six-month extension, running from November 1, 2026, through April 30, 2032. Award will be determined using the Lowest Price Technically Acceptable method, evaluating the total price across the base, all option years, and the extension. Technical acceptability is based on the contractor's personnel qualifications, OEM access, technical resources, and parts capability. Key performance standards include a 4-hour telephone response time, on-site arrival within 48 business hours for unscheduled repairs, and a minimum monthly equipment uptime of 95 percent.

Defense Health Agency

POSTED

about 13 hours ago

DEADLINE

MIVA DIRECT IMAGER MAINTENANCE SERVICES

Solicitation # FA857127Q0004

Solicitation FA857127Q0004 is a firm-fixed-price request for quote conducted under Simplified Acquisition Procedures as a sole source requirement for the Original Equipment Manufacturer, MIVA Tek Global. The contract supports the 402nd Electronics Maintenance Group at Robins Air Force Base, Georgia, for the maintenance of a MIVA Direct Imager (SN: 1903.593). The scope of work includes bi-annual on-site maintenance visits, software updates, emergency repairs, and the provision of specific maintenance kits and vacuum filters. The requirement is structured with a basic year and four one-year options, featuring the MIVA TekFlex Gold Plan which provides 135 hours of annual technical support for training, repair labor, and process support. The contractor is responsible for all labor, travel, lodging, and materials, with deliverables including calibration certificates, maintenance service reports, and status reports submitted via the Wide Area WorkFlow system. Compliance requirements are stringent, encompassing CMMC cybersecurity standards, NISPOM security regulations, and Department of the Air Force personnel security programs. Access to Robins AFB requires criminal background checks and valid identification. This acquisition is designated as a small business set-aside, specifically targeting HUBZone and Service-Disabled Veteran-Owned Small Businesses.

FA8571 Maintenance Contracting Afsc Pzim

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → Navsup Weapon Systems Support Mech

Same awarding agency

MIL-SPEC Packaging and Shipping ServicesThis subcontract for MIL-SPEC Packaging and Shipping Services involves the specialized packaging and delivery of repaired fuel control units for prime contractors supporting Navsup Weapon Systems Support Mech projects. The contractor is responsible for ensuring all items are packaged according to MIL-STD-2073-1 and MIL-STD-129 standards, utilizing MIL-SPEC crates and ESD-safe materials to prevent environmental damage and electrostatic discharge. The scope of work includes the secure labeling and coordination of deliveries to MAPAC: PTK002, with performance taking place in Mechanicsburg, Pennsylvania. This opportunity falls under NAICS code 484220 and was posted by the Department of Defense, with a response deadline of November 6, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 13 hours ago

DEADLINE

Fuel Control Replacement Parts SupplierThis subcontract involves the supply of replacement parts and substituting components for prime contractors supporting Navsup Weapon Systems Support Mech projects for the GR1 Weapon system. The supplier is responsible for providing OEM-specification parts for part number L16716P25, which must be accompanied by technical drawings and detailed written explanations for any substitutions made. All delivered materials must be certified as mercury-free in accordance with FED STD 313 and OSHA 29 CFR 1910.1200, and must include the necessary MSDS documentation. The work is performed in Mechanicsburg, Pennsylvania, under NAICS code 333611 for the Department of Defense.

Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 13 hours ago

DEADLINE

Supply of Optoelectronic Components for Display AssemblyThis subcontract involves the supply of raw materials, glass, circuitry, and specialized optoelectronic components for display assemblies supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. All sourced components must strictly adhere to TDP Version O07 specifications, and the provider is required to ensure full traceability for all non-manufactured items. Materials must be packaged according to MIL-STD-2073 and comply with OSHA/FED STD 313 regulations regarding hazardous materials. The contractor is responsible for delivering certified components or raw materials by the established deadlines, with the response window for this opportunity closing on October 22, 2026.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 13 hours ago

DEADLINE

Manufacture of Optoelectronic Display (NIIN: 015626905)This subcontract involves the manufacture of Optoelectronic Display assemblies (NIIN: 015626905) for prime contractors supporting Navsup Weapon Systems Support Mech projects under the Department of Defense. The selected provider must fabricate units in strict accordance with TDP Version O07 and ensure all physical identification and marking comply with MIL-STD-130, REV N. Additionally, the contractor is responsible for coordinating Government source inspections to verify quality and compliance. Operational requirements include the possession of specialized optoelectronic assembly equipment and strict adherence to OSHA and FED STD 313 standards for the handling of hazardous materials. This opportunity falls under NAICS code 334511, with a response deadline set for October 22, 2026.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 13 hours ago

DEADLINE

Manufacture and Supply of Fluid Valve Stems (NIIN 013374290)This subcontract involves the manufacture and supply of precision-machined fluid valve stems (NIIN 013374290) for Department of the Navy shipboard system projects. The contractor is responsible for processing QQ-N-286 nickel alloy in Form 2, Annealed and Age Hardened, Hot Finished condition. The scope of work includes precision machining as well as performing quantitative chemical and mechanical analyses to ensure component integrity. Strict quality and compliance standards are required, specifically Special Emphasis Material Level I Certification and calibration adhering to MIL-STD-46662 or ISO10012-1. Final deliverables consist of the completed valve stems accompanied by the DI-MISC-80678 certification report. This opportunity is managed by the Navsup Weapon Systems Support Mech under NAICS code 332721, with a response deadline of November 6, 2026.

Precision Turned Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves the specialized packaging of 14 Display Units, requiring strict adherence to MIL-STD-2073 for packing and MIL-STD-147 for palletization. To ensure safe transport to DLA Distribution in New Cumberland, the contractor must utilize approved MIL-SPEC crates, cushioning, and moisture barriers. The opportunity is categorized under NAICS code 488510 and was posted on October 7, 2026. Interested parties must submit their responses by the deadline of October 22, 2026.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Oxygen Clean Processing for Display Unit ComponentsThis subcontract involves providing precision cleaning and testing services for display unit components on behalf of prime contractors supporting Navsup Weapon Systems Support Mech. The scope of work requires the cleaning of shipboard oxygen, helium, helium-oxygen, nitrogen, and hydrogen systems components. All processes must be conducted within a certified Oxygen-Clean facility and utilize testing equipment that strictly adheres to MIL-STD-1330 standards to ensure the delivery of certified Oxygen Clean components or assemblies. The opportunity is categorized under NAICS code 811310 and is issued by the Department of Defense. Interested parties should note that the response deadline is October 22, 2026, at 8:30 PM.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

about 13 hours ago

DEADLINE

Manufacture of Display Units (NSN 1HM 7025-01-545-9501)This subcontract involves the manufacture of 14 complete Display Unit assemblies for prime contractors supporting Navsup Weapon Systems Support Mech projects. The contractor is responsible for the fabrication and assembly of units based on designs for Cage Code 63CL1 FXDSP0224 or 66200 FXDSP0224, utilizing TDP Version No. O06. Key technical requirements include the implementation of physical identification in accordance with MIL-STD-130, REV N, and the coordination of Government Source Inspection. The project falls under NAICS code 334519 and is associated with NSN 1HM 7025-01-545-9501.

Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

Interface Board Component SupplierThis subcontract involves the supply of military-grade electronic components, including capacitors, resistors, and integrated circuits, to support prime contractors for Navsup Weapon Systems Support Mech projects. The primary objective is the delivery of certified components specifically required for the repair of Interface Boards under NIIN 016686773. All provided materials must strictly adhere to TDP Version 004 specifications and be delivered using ESD-safe packaging. Managed under the Department of Defense, the contract emphasizes the critical need for component authenticity to mitigate the risk of counterfeit parts entering the defense supply chain. Interested parties must respond by November 6, 2026, in accordance with the guidelines set for NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 13 hours ago

DEADLINE

Interface Board Teardown, Evaluation, and RepairThis subcontract for the Department of Defense involves the technical restoration of Interface Boards (NIIN 016686773) for Navsup Weapon Systems Support Mech projects. The scope of work includes disassembling boards to identify faults, performing repairs or modifications according to TDP Version 004 and IRPOD, and validating all functionality against strict military specifications. To ensure quality and compliance, the contractor must utilize ESD-protected work areas and specialized diagnostic equipment while adhering to MIL-STD-2073 and MIL-STD-129 standards. The project requires the delivery of fully repaired Interface Boards and the submission of CAV reporting. This opportunity falls under NAICS code 335129 and was posted on October 7, 2026, with a response deadline of November 6, 2026.

Other Lighting Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services supports prime contractors on Navsup Weapon Systems Support Mech projects within the Department of Defense. The scope of work involves the specialized packaging of sensitive test equipment in strict compliance with MIL-STD-2073 and MIL-STD-129 standards. Responsibilities include the application of all necessary shipping labels, markings, and IUID labeling to ensure regulatory adherence. The selected provider is responsible for FOB Destination transportation, ensuring that all properly packaged and labeled equipment is delivered securely to designated Navy destinations. This opportunity falls under NAICS code 488510, with a response deadline set for November 6, 2026.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS