Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

On-Site Installation and Calibration of 3D Printing System

Active

Federal

Response Deadline07/21/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the on-site installation, setup, and calibration of a metal 3D printing system at a government facility located in Columbus, Ohio, with the objective of achieving full operational readiness and compliance with technical standards. The work is classified as a subcontract under NAICS code 238990 and is being managed by the DCSO-COLUMBUS-DIVISION-2 under the Department of Defense. The system must be brought online in accordance with government protocols, ensuring all hardware, software, and safety parameters are properly configured and validated for mission-critical use. All activities are expected to occur at the specified federal site, with no remote or off-site work permitted. The solicitation was posted on July 7, 2026, with a firm deadline for responses on July 21, 2026, at 4:00 p.m. The requirement is not subject to any specific set-aside classifications, and while no point of contact is listed, bidders must be prepared to demonstrate technical expertise in additive manufacturing systems, experience with federal facility protocols, and the ability to comply with Department of Defense operational and security requirements. The successful contractor will be responsible for delivering a fully functional, calibrated system ready for immediate production use, with documentation and training provided to support sustained operations.

General Info

On-site installation and calibration of metal 3D printer at Columbus, Ohio government facility for DoD mission use.

Agency

Department Of Defense → DCSO-COLUMBUS-DIVISION-2View Agency

NAICS

238990 - All Other Specialty Trade ContractorsView NAICS

Place of Performance

Columbus, OH, 43218, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 7

subcontract

Response DeadlineJul 21

Submission deadline

Response Deadline

07/21/2026, 04:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DCSO-COLUMBUS-DIVISION-2

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DCSO-COLUMBUS-DIVISION-2

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site installation, setup, and calibration of the metal 3D printer to ensure operational readiness and technical compliance at the government facility.

Similar Contracts

Same NAICS industry code

Curb Signage & Pavement Marking InstallationThe City of Atlanta is seeking a subcontractor to fabricate and install regulatory and wayfinding curb signage across the entire city, along with repainting pavement markings to align with updated parking and loading zone regulations. This project requires comprehensive execution to ensure clear, compliant, and visible signage and markings are uniformly applied citywide, supporting improved traffic management and public safety. The work must meet municipal standards for durability, readability, and placement, ensuring consistency in guidance for drivers, pedestrians, and commercial operators. Subcontractors must respond by August 4, 2026, with the contract categorized under NAICS code 238990 for other specialty trade contractors. The solicitation is issued under the Georgia Department of Administrative Services and is open to qualified firms capable of handling large-scale, citywide infrastructure enhancements. The project demands coordination with municipal authorities, adherence to local ordinances, and timely delivery without disrupting public access or transportation flow. While specific performance locations are not detailed, the scope extends throughout the City of Atlanta, requiring logistical planning and resource allocation across multiple neighborhoods and thoroughfares.

City of Atlanta

POSTED

about 13 hours ago

DEADLINE

On-Site Sign Installation and RiggingThe contract titled On-Site Sign Installation and Rigging involves the physical installation of signage on public property, requiring specialized equipment such as lifts and rigging systems to safely position and secure signs. Work requires anchoring systems to ensure long-term stability and compliance with safety standards, along with the implementation of traffic control measures to protect workers and the public during all phases of installation. Operations must be conducted with strict adherence to site-specific safety protocols and regulatory requirements applicable to public infrastructure projects. The solicitation is structured as a subcontract under NAICS code 238990, with a response deadline of August 14, 2026, at 9:00 AM. The contracting entity is OC Community Resources, operating under the state of California, though specific city, state, or zip code details for the place of performance are not provided. All work must be performed on public property, and bidders are expected to have the necessary equipment, personnel training, and experience in elevated sign installation and traffic management. The opportunity is accessible via the provided public procurement portal link.

OC Community Resources

POSTED

about 14 hours ago

DEADLINE

Emergency Fence RepairThe contract is for emergency fence repair services at the California Office of Emergency Services headquarters, open exclusively to small businesses. The solicitation, numbered 0000039820, was posted on July 17, 2026, with a response deadline of July 29, 2026, at 6:00 PM. Work must be performed at the Cal OES HQ location in California, and no specific NAICS code or set-aside type has been designated. The primary point of contact for inquiries is Carrie Koch, who can be reached via email at carrie.koch@caloes.ca.gov. All proposals must be submitted through the CalEProcure portal using the provided UI link before the deadline to be considered.

Office of Emergency Services

POSTED

about 16 hours ago

DEADLINE

Fencing and Safety BarriersThe contract is for the installation of fencing and safety barriers along a corridor under a subcontract arrangement, with the North American Industry Classification System code 238990 indicating miscellaneous construction work. It was posted on July 17, 2026, with a response deadline of August 21, 2026, and is being managed by the state of Utah through its agency organization. The place of performance and detailed office address are not specified, but the work is expected to occur within Utah's jurisdiction. The solicitation number is not provided, and there is no set-aside designation or description indicating reserved eligibility for specific business categories. Interested parties must submit their proposals through the designated online portal before the deadline to be considered for award.

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Traffic Control and Safety Compliance ServicesThe contract seeks providers of temporary traffic control services to support sign installation and maintenance work in Broward County, Florida, with a focus on strict adherence to OSHA, MUTCD, and FMUTCD safety standards. Required services include the deployment and management of cones, barricades, signage, and trained flaggers to ensure safe work zones for both workers and the public during all phases of sign-related activities. The work must be performed in accordance with state and federal transportation safety protocols, with all materials and staffing meeting established compliance requirements. This is a subcontract opportunity posted on July 17, 2026, with responses due by August 17, 2026, under the NAICS code 238990 for other specialty trade contractors. All work is expected to occur within Broward County, and the contract is not subject to a specific set-aside designation. Interested parties must submit proposals through the designated online portal before the deadline, and performance is contingent upon meeting all safety and operational specifications outlined in the referenced regulations. No point of contact details are provided in the solicitation, and submissions must be made via the linked platform.

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Traffic Control and Signage ServicesThe contract requires full temporary traffic control services during seal coat operations, encompassing the placement and management of all necessary signage, detours, and road closure coordination to ensure public safety and regulatory compliance. All activities must adhere strictly to the Manual on Uniform Traffic Control Devices and Pennsylvania Department of Transportation standards, ensuring uniformity and legal adherence throughout the project. The work is to be performed within Northampton County and is designated as a subcontract opportunity under NAICS code 238990. The solicitation was posted on July 17, 2026, with a response deadline of August 7, 2026, at 3:00 PM. The awarding entity is Northampton County, Pennsylvania, which has jurisdiction over the project location, though specific office details and point of contact information are not provided in the data. Interested parties must submit proposals through the designated online portal prior to the deadline to be considered for award.

Northampton County

POSTED

about 18 hours ago

DEADLINE

On-Site Fuel Transfer Operations & MonitoringThe contract outlines the execution of secure and compliant on-site fuel transfer operations, requiring strict adherence to safety protocols throughout every phase of the process. Key responsibilities include conducting thorough pre-inspection checks to ensure equipment readiness, real-time monitoring during fuel transfer to detect anomalies, and implementing overflow prevention measures to avoid environmental hazards. Valve control and hose draining procedures must be performed with precision, followed by comprehensive post-operation leak checks to confirm system integrity and prevent contamination. All activities must be conducted in alignment with defense and environmental safety standards to safeguard personnel, infrastructure, and surrounding areas. The work is categorized under NAICS code 238990 for other specialty trade contractors and is administered by the Defense Logistics Agency under the Department of Defense. Although specific locations and contact details are not provided, the contract will be carried out at designated operational sites where fuel handling is critical to mission readiness. The subcontract is active as of July 17, 2026, and is tied to the official contract identification SPE60522D4008, with performance obligations linked to the delivery order SPE60526FHRX1. The nature of the work demands specialized expertise in fuel logistics, safety compliance, and rapid response capabilities under demanding operational conditions.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Confined Space Entry and Permitting ServicesThe contract covers the execution of cleaning and maintenance services within permit-required confined spaces, requiring comprehensive atmospheric testing, continuous monitoring, and immediate rescue readiness protocols to ensure worker safety and regulatory compliance. All work must adhere to strict safety standards for entry, hazard assessment, and emergency response, with personnel trained and equipped to handle the unique risks associated with confined environments. The services are provided under a subcontract arrangement awarded by the Defense Logistics Agency within the Department of Defense, supporting mission-critical infrastructure maintenance that demands precision, procedural rigor, and unwavering adherence to safety protocols. Performance is subject to stringent oversight to guarantee operational integrity and compliance with federal safety guidelines.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Minor Construction or Installation ServicesThe contract titled Minor Construction or Installation Services is a subcontract issued by Dallas Area Rapid Transit under the NAICS code 238990 for limited field work such as equipment mounting, signal integration, or minor construction tasks that may be specified in individual purchase orders. The opportunity was posted on July 17, 2026, with a response deadline of July 22, 2026, and is open for qualified subcontractors to submit proposals. The place of performance and specific location details are not provided, and no setaside status or organization type is indicated. All work under this contract must align with the scope defined in purchase orders and is expected to support infrastructure or operational needs related to transit systems in Texas. Interested parties must respond by the stated deadline through the provided online portal.

Dallas Area Rapid Transit

POSTED

about 19 hours ago

DEADLINE

Small and Local Business Participation (Section 3 Compliance)Opportunity Home San Antonio is inviting small, minority, women-owned, and local businesses to participate in subcontracting and employment opportunities tied to HUD’s Section 3 requirements, which prioritize economic inclusion for low- and very low-income individuals in housing and community development projects. The solicitation, posted on July 17, 2026, with a response deadline of August 7, 2026, is classified as a subcontract opportunity under NAICS code 238990 for other specialty trade contractors, and requires participants to demonstrate compliance through proper documentation and ongoing reporting to ensure adherence to Section 3 goals. Businesses must be prepared to engage in activities that directly support housing and community development efforts in the San Antonio area, leveraging their capacity to hire and subcontract with locally based, disadvantaged groups as defined by federal guidelines. Participation involves meeting specific workforce and procurement targets, and successful bidders will be expected to maintain transparent records to verify their compliance with the program’s equitable outcomes.

Opportunity Home San Antonio

POSTED

about 20 hours ago

DEADLINE

Accessibility and ADA Compliance WorkHarris County is seeking qualified contractors to perform accessibility improvements under a subcontract opportunity titled Accessibility and ADA Compliance Work, with a response deadline of August 10, 2026. The work requires the installation of detectable warning surfaces, ADA-compliant curb ramps, and accessible pathways, all of which must strictly adhere to the Texas Accessibility Standards and the Americans with Disabilities Act guidelines. This project is classified under NAICS code 238990, indicating it falls within other specialty trade contracting services, and is open to contractors capable of meeting precise federal and state accessibility requirements. The opportunity is posted on the Harris County Bonfire Hub platform, and while the specific location within Texas is not detailed, performance is expected to occur somewhere within Harris County. Interested parties must submit their proposals by the stated deadline to be considered for award.

POSTED

about 20 hours ago

DEADLINE

Site Preparation and RestorationThe contract involves site preparation and restoration activities for construction projects in Harris County, Texas, requiring clearing, grading, and site conditioning in accordance with Special Provision 02200 and applicable local environmental regulations. All work must include the restoration of disturbed areas after construction is complete to ensure compliance with ecological and land use standards. The opportunity is classified as a subcontract under NAICS code 238990 and is open for responses until August 10, 2026, with proposals due by 7:00 PM local time. It was posted on July 17, 2026, and can be accessed through the Harris County BonfireHub online portal. No set-aside designation or agency organizational details are specified, and no point of contact information is provided in the published data.

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → DCSO-COLUMBUS-DIVISION-2

Same awarding agency

Metal 3D Printer SystemA single 3D metal printer is being procured for delivery to the Product Test Center Mechanical Lab VTM in Columbus, Ohio, under solicitation SP4706-26-Q-0023. The requirement includes full installation, calibration, a three-year preventative maintenance agreement, and three days of on-site training for up to four PTC associates. Offerors must submit quotes that include their Cage Code, address all lead times, and itemize pricing consistent with the technical specifications and performance work statement. Quotes must be emailed to Contracting Officer Elizabeth Dickstein and are required to be received no later than 12:00 PM EST on Tuesday, July 21, 2026; late submissions will not be considered. The solicitation is tied to NAICS code 334516 and is managed by the Department of Defense’s DCSO-COLUMBUS-DIVISION-2 office, with the place of performance also located in Columbus, Ohio. Additional details are available through the attached technical documentation and the primary point of contact listed in the solicitation.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Fortus Scanner & Consumables

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Post-Warranty Maintenance and SupportThe contract obligates the provider to deliver comprehensive post-warranty maintenance services for a resistivity measurement system, ensuring continued operational reliability beyond the initial warranty period. Key services include precise calibration to maintain measurement accuracy, priority technical support to minimize downtime, and discounted pricing on consumables to reduce ongoing operational costs. These services are critical to sustaining the performance and longevity of the equipment in a high-demand environment. The contract is classified as a subcontract under NAICS code 811212, issued by the Department of Defense through its DCSO-COLUMBUS-DIVISION-2 office, with performance required in Philadelphia, Pennsylvania, 19111. The solicitation was posted on July 8, 2026, and responses are due by July 23, 2026, at 3:59 a.m. The agreement emphasizes proactive support to ensure uninterrupted functionality of the resistivity measurement system, aligning with the Department's operational needs for precision instrumentation.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Technical Training DeliveryThe contract pertains to the delivery of technical training for personnel within the Defense Logistics Agency, focusing on the operation of specialized systems, proper handling of probes, calibration procedures, and software utilization with an emphasis on non-proprietary data export capabilities. Training must be conducted to ensure DLA staff can efficiently and accurately perform day-to-day technical tasks using the specified equipment and software, with all instructional materials and methods designed to support hands-on learning and practical application without reliance on proprietary or restricted data formats. The solicitation is classified as a subcontract under NAICS code 611430, indicating it involves other business support services related to technical training. It was posted on July 8, 2026, with a response deadline of July 23, 2026, and the performance location is designated as Philadelphia, Pennsylvania, with a ZIP code of 19111. The contracting activity falls under the Department of Defense, specifically the DCSO-COLUMBUS-DIVISION-2 office, though no point of contact information or set-aside details are provided, and the contract does not specify geographic restrictions beyond the place of performance.

Professional and Management Development Training

POSTED

DEADLINE

On-Site Installation by OEM-Certified EngineerAn OEM-certified service engineer will perform the on-site installation of a resistivity measurement system at the DLA Product Test Center located in Philadelphia, Pennsylvania, with a postal code of 19111. The work is part of a subcontract under the Department of Defense, specifically managed by the DCSO-COLUMBUS-DIVISION-2, and aligns with the NAICS code 811212 for industrial machinery and equipment repair and maintenance. The solicitation was posted on July 8, 2026, and responses are due by July 23, 2026, at 3:59 a.m. Eastern Time. The installation must be completed by a certified professional to ensure system functionality and compliance with technical standards, and the location of performance is strictly limited to the specified facility in Philadelphia. No set-aside provisions or additional organizational type details are specified for this opportunity.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Supply of Vibration Isolation TableThe contract calls for the supply of a high-performance vibration isolation table designed for precision optical applications, featuring a natural frequency of no more than 2.0 Hz and a load capacity of 500 pounds. The tabletop must be constructed from stainless steel to ensure durability, stability, and compatibility with sensitive instrumentation in controlled environments. This equipment is intended for use in high-accuracy settings where even minimal vibration can compromise measurements or operations, making the technical specifications non-negotiable. The table must meet rigorous environmental and performance standards to support federal research, development, or operational needs. The contract is categorized as a subcontract under NAICS code 333291, which pertains to other commercial and service industry machinery manufacturing. It was posted on July 8, 2026, with a response deadline of July 23, 2026, at 3:59 AM Eastern Time. The place of performance is identified as Philadelphia, Pennsylvania, with a zip code of 19111, indicating the equipment must be delivered to or installed at a facility within that location. The contracting activity is linked to the DCSO-COLUMBUS-DIVISION-2 under the Department of Defense, suggesting this procurement supports defense-related scientific or engineering initiatives requiring exceptional vibration control. No set-aside provisions or specific point of contact details are provided in the available data.

Paper Industry Machinery Manufacturing

POSTED

DEADLINE

Supply of 4-Point Probe Resistivity Measurement SystemThe contract entails the supply of a fully automated 4-point probe resistivity measurement system designed for precise characterization of semiconductor materials, thin films, and conductive polymers under variable thermal conditions ranging from ambient to 300°C. The system must support autoranging functionality to ensure accurate measurements across a broad spectrum of resistivity values and feature high edge proximity accuracy to enable reliable testing of small or irregularly shaped samples. It is intended for use in advanced materials research and quality control applications where thermal stability and measurement precision are critical. This subcontract, issued under NAICS code 334516 by the Department of Defense through its DCSO-COLUMBUS-DIVISION-2 office, specifies Philadelphia, PA, as the place of performance with a response deadline of July 23, 2026. The solicitation was posted on July 8, 2026, and is targeted at qualified vendors capable of delivering a turnkey, high-performance measurement solution that meets stringent military and industrial standards for materials characterization. All deliverables must comply with technical specifications governing automation, thermal control, and measurement accuracy without reliance on manual intervention.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

4-Point Probe Resistivity Measurement System SuiteThe solicitation seeks a 4-Point Probe Resistivity Measurement System Suite, including necessary installation and training, for use by the DCSO-COLUMBUS-DIVISION-2 under the Department of Defense. The requirement is identified by solicitation number SP4706-26-Q-0026, posted on July 8, 2026, with responses due by July 23, 2026. This is a sources-sought notice with no set-aside designation, targeting vendors capable of delivering a system that meets detailed technical specifications outlined in the attached Performance Work Statement. The North American Industry Classification System code is 334516, indicating a focus on semiconductor and other electronic component manufacturing equipment. The place of performance is in Philadelphia, Pennsylvania, with a zip code of 19111, while the contracting office is located in Columbus, Ohio, at 43218. Primary point of contact is Shaun Bunnell, reachable at 614-693-2603 or shaun.bunnell@dla.mil, with Jacob Combs as the secondary contact at jacob.combs@dla.mil. Interested parties must review the full technical requirements in the Performance Work Statement, and all relevant information is accessible through the provided SAM.gov link. This procurement is part of a broader effort to support advanced material characterization capabilities within a defense-related context.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Supply of HEPA-Filter Vacuum and Tool KitThe contract calls for the supply of a HEPA-filter vacuum and a specialized tool kit designed specifically for the maintenance and cleaning of a metal 3D printer system. The equipment must meet stringent performance standards to ensure safe and effective removal of fine metal powders and contaminants, which is critical for operational integrity and personnel safety in additive manufacturing environments. Delivery of these items is required to support ongoing maintenance operations at the designated performance location in Columbus, Ohio, with zip code 43218. This subcontract, issued under the Department of Defense through the DCSO-COLUMBUS-DIVISION-2, falls under NAICS code 423830, indicating it pertains to commercial equipment and supplies wholesale trade. The solicitation was posted on July 7, 2026, with a firm response deadline of July 21, 2026, at 4:00 PM. While no set-aside designation or points of contact are specified, the urgency of the timeline and the technical specificity of the required equipment underscore the importance of timely and precise delivery to maintain mission-critical printing operations.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of 316L Stainless Steel Printing PowderThe contract entails the supply of 18 containers, each containing 8 kilograms of 316L stainless steel powder, specifically intended for use in metal additive manufacturing applications. This material is critical for high-performance industrial components requiring corrosion resistance, strength, and durability, and must meet stringent quality standards suitable for defense-related additive manufacturing processes. The solicitation is issued as a subcontract under the NAICS code 325998, indicating it falls under other chemical product and preparation manufacturing, and is managed by the DCSO-COLUMBUS-DIVISION-2 under the Department of Defense. Performance of the contract is to be carried out in Columbus, with a zip code of 43218, and the response deadline is set for July 21, 2026, at 4:00 PM. The posting date is July 7, 2026, giving potential suppliers approximately two weeks to submit their proposals. There is no designated set-aside classification, and the contract does not specify a point of contact, requiring proposers to rely on the official SAM.gov portal for further details or inquiries. The material supplied must be fully compliant with the technical demands of the end-use application without the benefit of additional contractual specifications listed here.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Three-Year Preventative Maintenance and Calibration ServicesThe contract encompasses three years of comprehensive preventative maintenance, routine service, and on-demand calibration services for an installed metal 3D printer system, ensuring continuous operational reliability and precision. Services are to be performed at the designated place of performance in Columbus, Ohio, with the work governed under NAICS code 811212, which pertains to industrial machinery and equipment repair and maintenance. As a subcontract, this engagement is part of a larger procurement structure under the Department of Defense, specifically managed by the DCSO-COLUMBUS-DIVISION-2, and is intended to support critical manufacturing and production capabilities tied to national defense objectives. The solicitation was posted on July 7, 2026, with a firm deadline for responses set for July 21, 2026, at 4:00 PM Eastern Time. There is no set-aside designation or description provided, indicating the opportunity is open to any qualified subcontractor. While no point of contact details are listed, interested parties must respond through the official SAM.gov portal linked in the solicitation. The contract requires adherence to strict service standards to maintain system integrity, minimize downtime, and ensure the printer operates within calibrated tolerances essential for high-precision metal component fabrication.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

On-Site Operator Training for 3D Printing SystemA three-day on-site training program is being sought to instruct up to four government personnel in the operation, safety procedures, and maintenance of a metal 3D printing system. The training will be delivered at the designated location in Columbus, Ohio, with a zip code of 43218, and is intended to ensure personnel are fully capable of handling the equipment competently and safely. The contract is classified as a subcontract under NAICS code 611430, which pertains to professional and management development training, and is issued by the DCSO-COLUMBUS-DIVISION-2 under the Department of Defense. The opportunity was posted on July 7, 2026, and proposals must be submitted no later than July 21, 2026, at 4:00 PM to be considered. This effort supports the agency’s objective of building in-house expertise for advanced manufacturing technologies.

Professional and Management Development Training

POSTED

DEADLINE