Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

On-Site Installation & Commissioning

Active

Federal

Response Deadline07/27/2026, 08:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract outlines the physical installation, configuration, and commissioning of SCADA systems at Hill Air Force Base, including all associated hardware, wiring, networking infrastructure, and field devices. Work involves on-site implementation from initial setup through final testing, troubleshooting, and system validation to ensure full operational readiness in a secure military environment. All activities must comply with federal and defense standards, with performance strictly tied to the location at Hill Air Force Base, Utah, 84056. This is a total small business set-aside subcontract under NAICS code 238210, classified under the SBA’s small business program, limiting eligibility to qualifying small business concerns. The opportunity was posted on June 30, 2026, with proposals due by July 27, 2026. The contracting authority is the Department of Defense through the FA8201 Afsc Ol H Pzio office, and the work is intended to support critical infrastructure modernization at the facility. Bidders must be prepared to meet stringent technical, logistical, and security requirements inherent to military installations.

General Info

Small business subcontract to install and commission SCADA systems at Hill Air Force Base, Utah, meeting DoD security and technical standards.

Agency

Department Of Defense → FA8201 Afsc Ol H PzioView Agency

NAICS

238210 - Electrical Contractors and Other Wiring Installation ContractorsView NAICS

Place of Performance

Hill Air Force Base, UT, 84056, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJun 30

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 08:00:00 PM UTCin 6 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FA8201 Afsc Ol H Pzio

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FA8201 Afsc Ol H Pzio

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Physical installation of SCADA hardware, wiring, networking, and field devices; system testing, troubleshooting, and commissioning at Hill Air Force Base.

Similar Contracts

Same NAICS industry code

Elevator Lobby 2 Way CommunicationsThe contract involves the installation of 23 new two-way communication boxes in the Port of Seattle terminal, covering 17 passenger elevators, 3 service elevators, and 3 ramp landing elevators. This work is part of an aviation infrastructure project managed by the Aviation Project Management Group, with the primary objective of enhancing safety and accessibility by ensuring all elevator lobbies are equipped with reliable emergency communication systems. The solicitation is posted as a forecast under NAICS code 238210, indicating it relates to electrical contracting services, and no set-aside specifications have been designated. Point of contact for inquiries is Angela Peterson, with Christina Burdett serving as the project manager; both can be reached via provided phone numbers and email addresses. The contract posting date is July 21, 2026, and all details are accessible through the Port of Seattle’s official solicitation portal.

Aviation Project Management Group

POSTED

about 15 hours ago

DEADLINE

Variable Frequency Drives (VFD) Replacement Phase 3 (DBB)The Port of Seattle’s Aviation Facilities & Infrastructure division is preparing to replace the final 125 remaining failing Robicon Variable Frequency Drives (VFDs) as part of Phase 3 of its VFD Replacement Project. This effort involves the full removal of outdated units and installation of new VFD equipment, with all systems to be fully integrated into the Port’s Direct Digital Controller (DDC) network. The integration will enable real-time monitoring of energy consumption, output control data, and system efficiency, ensuring ongoing operational optimization. The scope includes all necessary wiring, testing, and commissioning activities to deliver a complete and functional system as specified. The project is classified under NAICS code 238210 and is being managed as a Design-Bid-Build (DBB) procurement with no set-aside designation. Yanet Maldonado is the primary point of contact for inquiries, with Sharon Miick serving as the project manager. The forecast was posted on July 21, 2026, and further details can be accessed through the Port’s official solicitation portal.

Aviation Facilities & Infrastructure

POSTED

about 15 hours ago

DEADLINE

Operational Security Cameras Bagwell and North Cargo AreasThe contract entails the full spectrum of design, permitting, and construction services required to install 50 high-resolution surveillance cameras across 43 distinct locations in the Bagwell and North Cargo Operations areas of the Port of Seattle. The primary objective is to enhance security and operational oversight by replacing outdated systems with advanced imaging technology that supports detailed forensic investigations and enforces the Port’s movement rules and regulations. In the Bagwell area, the new camera network will expand coverage to include key drive lanes and entrances, areas currently under-monitored as existing units focus on conveyor systems and security doors. In the North Cargo Operations zone, the solution will introduce flexible, user-controlled Pan Tilt Zoom units to deliver dynamic, broad-area surveillance that adapts to varying operational needs. The project is managed by the Aviation Project Management Group under the Port of Seattle, with primary point of contact Angela Peterson and Project Manager Randa Williams available for coordination. The effort aligns with NAICS code 238210 for electrical contractors and is posted as a forecast with no set-aside designation. The installation will significantly upgrade the Port’s existing security infrastructure, ensuring comprehensive visual monitoring of critical cargo movement corridors and operational zones to improve safety, accountability, and regulatory compliance. All work must be completed in accordance with Port requirements and timelines, with no detailed solicitation number yet assigned but available through the official portal link for ongoing updates.

Aviation Project Management Group

POSTED

about 15 hours ago

DEADLINE

Rental Car Facility (RCF) Quick Turn Around (QTA) Area Fire Suppression System Replacement (Re-bid)The Port of Seattle's Aviation Project Management Group is re-bidding a project to replace the existing aqueous film-forming foam (AFFF) fire suppression system, which contains per- and polyfluoroalkyl substances (PFAS), at the Rental Car Facility located in SeaTac. The scope involves the complete removal of the contaminated AFFF system, including hazardous materials and affected components, followed by the design and installation of a new full dry chemical fire suppression system. This new system will include all necessary components such as storage tanks, control valves, pumps, piping networks, sprinkler heads, and reserve tanks, and must be integrated with the facility's existing fire alarm system to ensure full operational compatibility and compliance with safety standards. The project is categorized under NAICS code 238210 for specialty trade contractors and is part of a broader initiative to eliminate PFAS-containing systems across Port facilities. Primary contact for the solicitation is Todd Rehm, with Project Manager Pat Nakamura available for technical inquiries. The forecast was posted on July 21, 2026, and all work is expected to occur at the designated facility on 3150 S 160th Street, SeaTac.

Aviation Project Management Group

POSTED

about 15 hours ago

DEADLINE

Parking Garage UPSThe contract entails the demo and replacement of the existing uninterruptible power supply system in a parking garage that supports critical infrastructure including ticketing kiosks and automated gates. The project involves installing new UPS equipment along with associated electrical components such as subpanels, feeders, disconnects, and breakers to ensure reliable backup power. The new system will feature integrated data connectivity for remote alarm monitoring and system status reporting to enhance operational awareness and maintenance responsiveness. All work must be executed to maintain continuous functionality of the parking facility’s critical systems during the transition. The opportunity is managed by the Aviation Project Management Group under the Port of Seattle, with the North American Industry Classification System code 238210 indicating electrical contracting services. Primary point of contact for inquiries is Yanet Maldonado, reachable via email and phone, with JJ Jordan serving as the project manager. The solicitation was posted on July 21, 2026, and is categorized as a forecast, suggesting it represents a planned procurement rather than an active solicitation at this time. The performance location is not specified beyond the Port of Seattle jurisdiction, and no set-aside details are provided.

Aviation Project Management Group

POSTED

about 15 hours ago

DEADLINE

Electrical Unit Price Portwide 2026The contract pertains to comprehensive electrical work for the Port of Seattle under the Electrical Unit Price Portwide 2026 solicitation, covering installations of raceways, wiring, medium voltage cabling, boxes, transformers, electrical devices, temporary power and lighting systems, testing, and grounding—all in strict compliance with applicable code-enforcing agency requirements. The Contractor is responsible for providing all labor, tools, equipment, materials, and incidental items necessary to complete tasks as directed by the Port through a Work Authorization, with labor classified according to the specified Schedule of Unit Prices to ensure consistent pricing and scope alignment. All work must be performed in accordance with the Port of Seattle’s standards and procedures, with performance obligations tied to the agency’s operational needs. The contract is administered by Port Construction Services, with primary point of contact Heather Bowden and Project Manager Lesley Miles available for coordination and inquiries. The solicitation is forecasted for 2026 under NAICS code 238210, indicating electrical contracting services, and is accessible via the Port’s official procurement portal for potential bidders seeking to participate in future work authorizations under this unit price framework.

Port Construction Services

POSTED

about 15 hours ago

DEADLINE

Electrical InstallationThe contract encompasses comprehensive electrical installation services for a Texas Department of Transportation project, requiring both rough-in and finish work including the installation of conduit, wiring, outlets, lighting fixtures, and proper connection to the main power supply. All work must adhere to industry standards and be completed to ensure full functionality and safety of the electrical systems in the designated location. The opportunity is structured as a subcontract under NAICS code 238210, which corresponds to electrical contracting, and is open for bids with a deadline of September 2, 2026, at 6:00 PM. The solicitation was posted on July 21, 2026, and interested parties must respond through the Texas SmartBuy portal at the provided hyperlink. There is no set-aside designation specified, and the place of performance details are not yet defined.

Texas Department of Transportation

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Gate Automation and Control WiringThe contract involves the installation and integration of electrical wiring, control panels, safety sensors, and comprehensive testing for automated gate systems to ensure dependable and secure operation. All work must comply with industry standards for performance and safety, with emphasis on seamless system functionality under various operational conditions. The scope requires skilled execution of control circuitry, sensor calibration, and final testing protocols to guarantee system reliability and fail-safe operation. This is a subcontract under NAICS code 238210 for the City of Port Arthur, Texas, with a response deadline of August 5, 2026. The procurement is open for qualified subcontractors to submit bids through the PublicPurchase platform, with no set-aside designation specified. The place of performance is within the jurisdiction of the City of Port Arthur, and all work must be completed to meet the technical and operational expectations outlined in the solicitation. Contractors must be prepared to deliver fully tested and certified gate automation systems ready for immediate deployment.

City of Port Arthur

POSTED

about 21 hours ago

DEADLINE

Electric Sliding Gate Installation (2 Units)The contract involves the installation of two electric sliding gates, encompassing all necessary components such as track systems, motors, automation controls, and basic wiring, along with complete operational testing to ensure full functionality. The work is classified under NAICS code 238210 and is structured as a subcontract solicited by the City of Port Arthur in Texas, with a response deadline of August 5, 2026. The project requires precise execution to meet performance standards, and all materials and labor must be provided in compliance with the specified technical requirements. The place of performance is located in Port Arthur, Texas, with no additional set-aside provisions or agency-specific restrictions outlined. Interested bidders must submit proposals through the designated public procurement portal by the stated deadline.

City of Port Arthur

POSTED

about 21 hours ago

DEADLINE

Supply and Installation of Network Data Drop Points 1220020268648The contract pertains to the supply and installation of network data drop points at the Victoria Jubilee Hospital in Jamaica, under solicitation number 2331/6752 issued by the Kingston Public Hospital under the Government of Jamaica. The solicitation was posted on July 20, 2026, with a response deadline of July 28, 2026, at 7:00 PM local time, indicating a narrow window for prospective bidders to submit proposals. The project requires the provision and proper installation of data points to support hospital network infrastructure, ensuring reliable connectivity for medical and administrative systems. The work is to be performed on-site at the hospital, with no specified set-aside or NAICS code provided, suggesting open eligibility for qualified contractors. The contract does not list a point of contact, and all necessary information must be obtained through the official ePPS portal for Jamaica’s public procurement system.

Kingston Public Hospital

POSTED

about 22 hours ago

DEADLINE

Mechanical & Instrumentation Integration (Solenoid & Flow Meter)The contract entails the mechanical and instrumentation integration of a solenoid valve and flow meter into an existing system to enable fully automated operation. The scope requires precise electrical and control system modifications to ensure seamless communication and coordination between the new components and the current infrastructure, with emphasis on reliability, safety, and operational efficiency. All work must be performed in accordance with industry standards and existing system specifications, ensuring compatibility and minimal disruption to ongoing operations. The opportunity is classified as a subcontract under NAICS code 238210 and is posted by the state of Utah with a response deadline of August 6, 2026. There is no specified set-aside designation, and the place of performance and contact details are not provided in the data. Interested parties must review the full solicitation through the provided Utah Bonfire Hub link to obtain detailed technical requirements, submission guidelines, and any additional procedural instructions necessary for proposal development.

POSTED

about 24 hours ago

DEADLINE

Field Installation Supervision and Technical OversightThe contract involves on-site supervision of electrical installations for municipal park projects under the City of Issaquah, Washington, with a focus on ensuring quality assurance, adherence to applicable electrical codes, and seamless coordination with contracted vendors and crews. The work requires technical oversight to guarantee that all electrical systems are installed correctly, safely, and in full compliance with local and national standards. Supervisors will be responsible for monitoring progress, reviewing workmanship, identifying and resolving deviations, and serving as the primary point of technical contact between the city and field teams to maintain project integrity and timeline. This subcontract is open for bidding with a response deadline of August 14, 2026, and is classified under NAICS code 238210 for electrical contracting services. The work will be performed exclusively at municipal park sites within Issaquah, requiring a strong local presence and familiarity with regional building regulations. Although no specific set-aside provisions or point of contact are provided, interested parties must respond by the stated deadline to be considered for award. The contract emphasizes hands-on field presence over remote management, demanding experienced personnel capable of making real-time technical decisions and ensuring compliance under dynamic construction conditions.

City of Issaquah

POSTED

DEADLINE

More opportunities from Department Of Defense → FA8201 Afsc Ol H Pzio

Same awarding agency

UTTR Portable Toilets ServiceThe contract solicitation FA820126Q0030 is a combined synopsis and request for quotation for commercial non-personal services related to the rental, delivery, relocation, cleaning, servicing, and maintenance of portable toilet units and portable toilet trailer units at the Utah Test and Training Range, Detachment 1, located on Dugway Proving Ground in Utah. This procurement is exclusively set aside for small business concerns under the Small Business Administration’s total small business set-aside provision, ensuring eligible small businesses have the opportunity to compete. The North American Industry Classification System code 562991 applies, covering other waste management services, and the requirement is managed by the Department of Defense through the office based at Hill Air Force Base, Utah. Responses must be submitted by August 12, 2026, at 8:00 p.m. Eastern Time, and no separate written solicitation will be issued—the RFQ is the sole source of requirements. Key contractual provisions and clauses are incorporated by reference and can be reviewed electronically at www.acquisition.gov. The point of contact for inquiries is Marina Callisto, with Stephanie Hatlem as secondary contact, reachable via phone and email provided. All performance is to occur at the specified location in Dugway, Utah, with a zip code of 84022, and interested parties can access additional details through the SAM.gov link provided.

Septic Tank and Related Services

POSTED

DEADLINE

Giant Voice Enhancement Hill AFBThis is a Firm-Fixed-Price, Total Small Business Set-Aside solicitation under NAICS code 334310 for the turn-key enhancement of the Giant Voice Emergency Mass Notification System at Hill Air Force Base, Utah. The contract requires the engineering, furnishing, installation, and testing of a system upgrade that includes four 16-horn speaker stacks, one Motorola repeater, and a single horn at each of the three base entry gates. All equipment must be exclusively SiRcom and Motorola branded and fully compliant with the Statement of Objectives, and the installation must adhere to UFC 4-021-01 and other referenced standards. Proposals must include a comprehensive project plan, as-built drawings, equipment manuals, all necessary software and firmware licenses, and training. The evaluation is conducted using the Lowest Price Technically Acceptable (LPTA) method, where technical acceptability is a pass/fail gate determined by meeting all minimum SOO requirements including deliverables, performance, and compliance; only technically acceptable proposals will be considered for award based on lowest total evaluated price. The period of performance is 365 days, beginning September 30, 2026, and ending September 29, 2027, with performance and delivery occurring at Hill AFB, UT, under F.O.B. Destination terms. All offerors must be registered in SAM, demonstrate small business status as defined for NAICS 334310, and comply with a full suite of FAR and DFARS clauses covering procurement integrity, cybersecurity, labor practices, and environmental certifications. Site visits are scheduled for July 29, 2026, and technical questions must be submitted by July 31, 2026. Proposals are due by 2:00 p.m. MDT on August 7, 2026, and must be sent electronically to both the Contracting Specialist and Contracting Officer with the solicitation number included in the subject line. Upon award, the contractor must use the Wide Area WorkFlow system for invoicing and receiving reports, with payment details tied to specified DoDAAC codes. A one-year warranty covers all materials and workmanship from the date of Government acceptance, including all costs for diagnosis, travel, and repair.

Audio and Video Equipment Manufacturing

POSTED

DEADLINE

Integrated Solid Waste Management for Hill AFBThis solicitation, FA820126Q0026, is a combined synopsis and request for quotation for Integrated Solid Waste Management, municipal solid waste collection, and recycling services at Hill Air Force Base and Little Mountain Test Annex in Utah. The requirement is set aside entirely for small businesses under FAR 19.5, with the NAICS code 562111, and is to be awarded using the Lowest Priced Technically Acceptable (LPTA) source selection method. Offerors must provide all personnel, equipment, tools, vehicles, supervision, and materials to perform core tasks including regular waste and recyclable collection, food waste handling, unscheduled pick-ups, container relocations, equipment maintenance, landfill tipping fee management, and support for special events and emergencies. Performance must adhere strictly to the Performance Work Statement dated June 2026, along with all applicable local, state, and federal regulations, with an emphasis on safety, sanitation, and customer service. The contract includes a base year from October 1, 2026, to September 30, 2027, with four one-year options extending through September 30, 2031. All line items are firm fixed price, and offerors must submit prices for both base and all option years, with unbalanced option pricing potentially rendering an offer unacceptable. Proposals must be submitted in three volumes: a Technical Proposal limited to 35 pages addressing work plan, compliance with standards, and capability to meet requirements; a Price Volume with complete pricing details; and a Contract Documentation Volume including an 180-day validity statement and pricing from the COMBO solicitation document. All submissions require both paper and electronic copies, clearly labeled with the solicitation number and offeror contact information. Technical acceptability is a pass/fail gate, requiring acceptable ratings in all subfactors—work plan, adherence to standards, and capability—with no tradeoffs permitted for higher-rated proposals. Award will go to the technically acceptable offeror with the lowest total evaluated price, including all options. Offerors must comply with numerous FAR and DFARS clauses, including those governing government property, electronic invoicing via WAWF, cybersecurity controls, whistleblower protections, antiterrorism training, and prohibitions on procurement from sanctioned regions or entities. All contractors must be registered in SAM, submit electronic payment requests through WAWF using designated DoDAACs, and provide detailed representations regarding business size, CAGE and

Solid Waste Collection

POSTED

DEADLINE

Support for the Industrial Wastewater Treatment PlantThis solicitation, numbered FA8201-26-R-0015, is a combined synopsis and request for proposal issued under FAR Part 12 for the design, fabrication, installation, and commissioning of a complete turnkey Supervisory Control and Data Acquisition (SCADA) system with integrated cybersecurity upgrades at the Industrial Wastewater Treatment Plant at Hill Air Force Base, Utah. The requirement mandates a single supplier to handle all aspects of the system—from engineering and programming to testing and warranty—ensuring unified responsibility and long-term support. The project includes replacing legacy infrastructure with a modern SCADA platform that must operate on a single, unified software licensed for 100,000 I/O points, support Modbus TCP, BACnet/IP, and OPC UA protocols, and meet rigorous cybersecurity standards compliant with the Risk Management Framework (RMF), including role-based access, multi-factor authentication, and account lockouts. The system must undergo a minimum three-day continuous factory acceptance test prior to shipment and be commissioned on-site by factory-certified personnel. The acquisition is structured as a Firm Fixed Price contract under a Lowest Price Technically Acceptable (LPTA) evaluation model, where proposals must clear pass/fail gates on technical acceptability, hardware compliance, and software platform unification before pricing is considered. Only one award will be made, and evaluation proceeds in ascending price order, with higher-priced offers reviewed only if lower-priced ones fail technical muster. The contract is a Total Small Business Set-Aside under NAICS code 541512 with a $34.0 million size standard, requiring offerors to be certified small businesses and to submit unique entity identifiers, CAGE codes, and SAM.gov representations. Offerors must provide detailed technical proposals limited to 40 pages, including preliminary bills of materials, cybersecurity implementation plans, demolition and switchover strategies for the legacy system, and documentation proving the Lead Programmer or Site Superintendent holds factory certification and experience in SCADA integration. Proposal submissions must be electronically sent to designated points of contact by 2:00 p.m. MDT on July 27, 2026, and must include administrative data, pricing per CLIN, certifications, and a formal statement of agreement with all solicitation terms. A mandatory site visit is scheduled for July 14, 2026, requiring attendees to submit personal identification details by July 9, with no more than three personnel per company allowed. Performance must be

Computer Systems Design Services

POSTED

DEADLINE

System Testing, Training & DocumentationThis contract calls for functional testing of a system, comprehensive training of base personnel, and the delivery of detailed as-built drawings, user manuals, and maintenance documentation. The work is intended to ensure the system operates as intended, that operational staff are fully prepared to use and maintain it, and that all technical documentation is accurately recorded and provided for long-term support. All deliverables must meet established standards to support continuity of operations and future maintenance efforts. The contract is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to bid, and it falls under the NAICS code 541340 for engineering services. It was posted on July 8, 2026, with a deadline for responses on August 7, 2026. The performance location is specified as Nibley, and the contracting entity is the Department of Defense under the FA8201 AFSC OL H PZIO office. While no point of contact is listed, interested parties can access further details via the provided SAM.gov link.

Drafting Services

POSTED

DEADLINE

Labor-Intensive Field Installation SupportThis contract is a subcontract titled Labor-Intensive Field Installation Support, set aside entirely for small businesses under the SBA Total Small Business Set-Aside provision, and is classified under NAICS code 238990 for other heavy and civil engineering construction. It requires physical installation services including digging, conduit pulling, equipment handling, and comprehensive site cleanup, all performed in the field at the designated location in Nibley. The solicitation was posted on July 8, 2026, with responses due by August 7, 2026, at 8:00 PM. The contracting activity is associated with the Department of Defense under the FA8201 Afsc Ol H Pzio office, though specific contact and address details are not provided. The work is expected to be carried out on-site, and interested small business entities must submit proposals prior to the deadline to qualify for award.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Project Management & Technical OversightThe contract titled Project Management & Technical Oversight is a small business set-aside solicitation under the SBA Total Small Business Set-Aside program, categorized under NAICS code 541611 for management consulting services. It requires comprehensive coordination of subcontractors, rigorous schedule management, implementation of quality assurance protocols, and timely technical reporting to ensure the successful turn-key delivery of a system. The performance location is specified as Nibley, and the contract opportunity is open for response until August 7, 2026, with a posting date of July 8, 2026. The sponsoring agency is the Department of Defense under the office designation FA8201 Afsc Ol H Pzio, and all work must be performed by a qualifying small business entity as defined by federal regulations.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Control System & Software ConfigurationThe contract entails the programming and configuration of a central control system, specifically focusing on alert templates, zone management, and seamless integration with dispatch and sensor systems to ensure operational efficiency and real-time response capabilities. This work requires specialized technical expertise in system architecture and software configuration to meet mission-critical performance standards within a defense environment. The effort is solicited as a subcontract under a Total Small Business Set-Aside, with the NAICS code 541512 identifying it as custom computer programming services, ensuring eligibility for small business contractors. The solicitation was posted on July 8, 2026, with a firm response deadline of August 7, 2026, at 8:00 PM. Performance will occur in Nibley, and the contracting activity originates from the Department of Defense under the FA8201 AFSC OL H PZIO office. Although specific contact details and address information are not provided, the opportunity is publicly accessible through the SAM.gov portal, and interested small businesses must submit proposals within the specified window to be considered for award.

Computer Systems Design Services

POSTED

DEADLINE

Outdoor Public Address Speaker InstallationThe contract involves the supply, mounting, and wiring of weather-resistant loudspeakers across Hill Air Force Base, with full infrastructure support including trenching, conduit installation, and electrical connections to ensure reliable public address system functionality in outdoor environments. All work must comply with military standards for durability and performance under harsh weather conditions, and the scope covers the complete installation process from site preparation to final testing and commissioning. The project is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses are eligible to bid, and it is classified under NAICS code 238210 for Electrical Contractors and Other Wiring Installation Contractors. The solicitation was posted on July 8, 2026, with proposals due by August 7, 2026, and performance will be localized to the Nibley area under the Department of Defense's FA8201 AFSC OL H PZIO office.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Emergency Mass Notification System Design & IntegrationThe contract entails the end-to-end design and integration of a Giant Voice emergency notification system tailored for a military base, requiring comprehensive architectural planning, precise component selection, and seamless incorporation with existing on-base communication and safety infrastructure. The work demands technical expertise in scalable mass notification systems aligned with military operational standards and environmental conditions, ensuring reliability under critical conditions. The project includes all phases from conceptual design through final deployment, with a focus on system interoperability, fail-safe operation, and real-time responsiveness. This is a small business set-aside subcontract under NAICS code 541330, issued by the Department of Defense under office FA8201 Afsc Ol H Pzio, with performance located in Nibley. Interested parties must submit proposals by August 7, 2026, with the opportunity exclusively open to small businesses meeting SBA size standards. The contract requires full compliance with federal acquisition regulations and emphasizes mission-critical functionality, with no flexibility in system performance or integration requirements. All work must be executed to support the基地’s emergency response protocols and sustain readiness without disruption to ongoing operations.

Engineering Services

POSTED

DEADLINE

As-Built Documentation & Technical Data DeliveryThe contract titled As-Built Documentation & Technical Data Delivery requires the compilation and delivery of comprehensive technical documentation for a Department of Defense project stationed at Hill Air Force Base, with a zip code of 84056. The deliverables include as-built drawings, software configuration files, user manuals, and CDRL-defined items, ensuring complete and accurate records of the final system configuration and operational parameters. This subcontract is set aside entirely for small businesses under the SBA’s Total Small Business Set-Aside provisions, and it is classified under NAICS code 541370, indicating it falls within engineering services. The solicitation was posted on June 30, 2026, and responses are due by July 27, 2026, with no specified point of contact listed in the public data. The work must be performed at or in support of the designated location, and compliance with all technical and formatting requirements for government documentation is mandatory.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Cybersecurity Implementation & CMMC ComplianceThis contract seeks a small business subcontractor to implement comprehensive cybersecurity measures aligned with NIST SP 800-171, including deployment of multi-factor authentication and secure logging systems to protect controlled unclassified information. The scope further encompasses preparing the system for the Risk Management Framework authorization to operate process and providing direct support toward achieving CMMC Level 2 certification, ensuring full compliance with Department of Defense cybersecurity standards. Performance is required at Hill Air Force Base, with a focus on delivering actionable, auditable controls that meet federal and DoD cybersecurity requirements. The opportunity is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program and is categorized under NAICS code 541512 for computer systems design services, with responses due by July 27, 2026.

Computer Systems Design Services

POSTED

DEADLINE