Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

On-Site Installation and Performance Verification

Active

Federal

Response Deadline08/02/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires on-site delivery, installation, alignment, and performance validation of UV doubling systems at the National Institute of Standards and Technology facility in Boulder, Colorado, with a deadline for responses on August 2, 2026. The work involves verifying critical technical parameters including optical power output, spectral bandwidth, and thermal stability under controlled environmental conditions to ensure the systems meet stringent performance standards. All activities must be conducted at the specified location, with the contractor responsible for ensuring the systems are fully functional and validated in situ. The contract is classified as a subcontract under NAICS code 811212 and is issued by the Department of Commerce through NIST, with no set-aside conditions applied.

General Info

On-site delivery, installation, and validation of UV doubling systems at NIST Boulder by August 2, 2026.

Agency

Department Of Commerce NistView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

Boulder, CO, 80305, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 2

Submission deadline

Response Deadline

08/02/2026, 05:00:00 PM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Commerce Nist

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Commerce Nist

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

On-site delivery, installation, alignment, and performance validation of UV doubling systems at NIST, including power, bandwidth, and thermal stability verification.

Similar Contracts

Same NAICS industry code

Repair and Calibration of HP 8648C RF Signal GeneratorsThe contract outlines the complete repair and calibration of two HP 8648C RF signal generators to restore them to full operational and cosmetic condition in accordance with the original manufacturer’s specifications. The work encompasses all necessary labor, parts, testing, and documentation to ensure the units meet performance standards as intended when new, including precision calibration to maintain accuracy and reliability in RF signal output. The project requires adherence to industry best practices for electronic repair and verification, ensuring both functionality and physical integrity are restored to original condition. This is a small business set-aside subcontract under NAICS code 811212, exclusively available to small businesses as defined by the SBA. The opportunity was posted on July 24, 2026, with a response deadline of July 31, 2026, at 5:00 PM. The contracting agency is the Department of Commerce, National Oceanic and Atmospheric Administration, and the place of performance details are not specified. Subcontractors must respond by the stated deadline to be considered, and all work must be performed in compliance with federal procurement guidelines applicable to SBA set-asides.

Department Of Commerce Noaa

POSTED

about 12 hours ago

DEADLINE

Repair and Calibration of Fluke 189 Digital MultimetersThe contract requires the repair and calibration of two Fluke 189 digital multimeters to restore them to like-new condition, adhering strictly to original equipment manufacturer standards for both electrical performance and cosmetic appearance. This includes comprehensive restoration work to ensure all functions operate accurately and the units appear as though newly manufactured, with no visible wear or damage. The effort must encompass full diagnostic testing, replacement of worn or faulty components, recalibration to certified tolerances, and final verification under standardized conditions to guarantee precision and reliability. This is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the North American Industry Classification System code 811212, which covers electronic equipment repair and maintenance. The opportunity was posted on July 24, 2026, with a firm response deadline of July 31, 2026 at 5:00 PM, and is structured as a subcontract under the Department of Commerce NOAA. The place of performance and point of contact details are not specified, but the work must be performed in compliance with federal procurement standards and the terms stipulated for small business set-asides.

Department Of Commerce Noaa

POSTED

about 12 hours ago

DEADLINE

Repair and Calibration of IFR Model 1200 Super S Spectrum AnalyzersThe contract requires the full repair and calibration of twelve IFR Model 1200 spectrum analyzers to restore them to like-new operating condition and appearance, ensuring they meet all original manufacturer specifications and tolerances. Each unit must be thoroughly inspected, repaired as needed, and professionally calibrated to perform with the accuracy and reliability expected of new equipment, with attention to both functional performance and cosmetic integrity. This is a small business set-aside subcontract under NAICS code 811212, exclusively available to small businesses as defined by the SBA, and is issued by the Department of Commerce NOAA. Responses are due by July 31, 2026, and the solicitation was posted on July 24, 2026, with no specific point of contact or physical place of performance provided in the public data. The work must be completed to a standard that ensures the instruments are fully operational and indistinguishable from new units in both performance and appearance.

Department Of Commerce Noaa

POSTED

about 12 hours ago

DEADLINE

In-House Repair and Refurbishment of Instrument ComponentsThe contract seeks qualified vendors to perform in-house repair, refurbishment, or remanufacturing of failed instrument modules including balance systems, load cells, and DSC sensors, all to meet original equipment manufacturer specifications. Work must be completed to ensure restored components function as intended, with quality standards aligned to the OEM’s original design and performance benchmarks. This subcontract opportunity is open to vendors capable of handling precision instrumentation repair with the technical expertise and facilities required to restore high-sensitivity components without compromising integrity or accuracy. The solicitation was posted on July 23, 2026, with responses required by August 4, 2026, at 4:00 PM. The North American Industry Classification System code is 811212, indicating the focus is on commercial and industrial machinery and equipment repair and maintenance. The contract is issued under the auspices of the Utah agency, though specific location details such as city, state, or address are not provided. Bidders must be prepared to meet all technical requirements outlined by the agency and deliver components that are fully functional, fully documented, and traceable to OEM standards to ensure long-term reliability and compliance.

POSTED

DEADLINE

In-Vehicle Integration and Installation ServicesBroward County is seeking qualified contractors to provide professional installation services for rugged laptops in emergency vehicles, encompassing full integration tasks such as secure docking, power system connectivity, antenna placement, and reliable network configuration to ensure optimal operational performance. The work requires technical expertise in vehicle electronics and must meet the demanding environmental and performance standards necessary for public safety use. The solicitation is open as a subcontract opportunity with a response deadline of July 31, 2026, and falls under NAICS code 811212 for automotive mechanical and electrical repair and maintenance. All installations must be performed in accordance with county specifications at the designated emergency vehicle fleet locations, with no specific set-aside conditions noted. Interested parties should submit proposals through the provided platform prior to the deadline to be considered for award.

POSTED

DEADLINE

On-Site Installation and Field Deployment ServicesSuffolk County is seeking a subcontractor to perform on-site physical installation of AVLM hardware across its fleet vehicles, requiring precise mounting, wiring, power connection, and comprehensive signal testing to ensure full operational functionality. Each installation must be accompanied by meticulous per-vehicle documentation to verify compliance and system integrity. The work falls under NAICS code 811212 and is part of a broader field deployment initiative focused on enhancing fleet management through accurate, real-time vehicle location monitoring. The solicitation was posted on July 23, 2026, with responses due by September 23, 2026, and the performance location is within Suffolk County, New York. The contract is structured as a subcontract and does not specify any set-aside provisions or designated point of contact.

POSTED

DEADLINE

Military-Standard Marking and LabelingThis contract requires the application of permanent markings and labels that comply fully with MIL-STD-129 and MIL-STD-130N standards, including the placement of barcodes, data matrix labels, and hazard warnings on military equipment and components. These markings must be durable, legible, and adhere to strict military specifications to ensure traceability, inventory management, and safety throughout the defense supply chain. The work is classified as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to bid, with the North American Industry Classification System code 811212 indicating the primary focus on repair and maintenance services. The solicitation was posted on July 23, 2026, with responses due by July 28, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. The place of performance and exact office location are unspecified, suggesting that work may be performed at various contractor facilities as long as compliance with military standards is maintained. The contract is accessible through the DIBBS procurement portal, and all offerors must ensure their labeling processes, materials, and documentation meet every technical and regulatory requirement outlined in the referenced standards without exception.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Quality Assurance and Critical Application Item ControlThe contract requires strict adherence to quality assurance protocols for Part Number 308006-1-2, identified as a Critical Application Item under defense quality standards, ensuring full traceability and comprehensive documentation throughout its lifecycle. All processes must meet rigorous military specifications to guarantee performance, reliability, and accountability in high-stakes operational environments. The solicitation, posted on July 23, 2026, with a response deadline of August 3, 2026, is structured as a subcontract under NAICS code 811212 and is tied to the Department of Defense in San Diego, with performance required at the 92136-3581 location. The contract emphasizes compliance with defense-grade documentation practices and mandates that all activities be conducted with precision to support mission-critical systems, though no set-aside provisions or point of contact details are specified.

POSTED

DEADLINE

MIL-STD-129 Marking, Labeling, and Bar-CodingThe contract requires full compliance with MIL-STD-129 for the marking, labeling, and barcoding of items to support Department of Defense logistics operations. All markings must include the National Stock Number, part number, CAGE code, and shipment-specific data to ensure accurate tracking and inventory management throughout the military supply chain. The work must be performed in accordance with strict DoD standards to guarantee interoperability and readiness across defense logistics networks. This subcontract is issued by DLA Dist San Joaquin under NAICS code 811212, with performance required at Tracy, California, 95304-5000. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. While no set-aside details are provided, the requirement is focused on precision labeling and labeling systems that meet federal military specifications, and all deliverables must support end-to-end logistics traceability without exception.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Military Shipment Labeling & BarcodingThe contract mandates the application of compliant labels and 2D Data Matrix barcodes for Department of Defense shipments, ensuring accurate identification and tracking of military cargo. Each label must include critical data elements such as the National Stock Number, quantity of items, designated consignee, and origin information, all in strict adherence to DoD standards for traceability and logistics efficiency. The work is to be performed at the New Cumberland facility with a ZIP code of 17070-5002, and the contract is specifically reserved for Service-Disabled Veteran-Owned Small Businesses under the SDVOSBC set-aside designation. The solicitation, issued under the NAICS code 811212, was posted on July 23, 2026, with proposals due by August 3, 2026, and is structured as a subcontract under the Department of Defense’s DLA supply chain operations.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Military-Compliant Marking, Bar-Coding, and SerializationThis contract requires the application of military-compliant markings and serialization standards to control handles and their packaging, specifically adhering to MIL-STD-129 and MIL-STD-130N requirements. The work involves embedding Data Matrix barcodes and implementing Unique Device Identification (UDI) to ensure full traceability and compliance with Department of Defense standards for item identification and logistics tracking. The contract is structured as a small business set-aside under SBA guidelines, exclusively available to total small businesses as defined by FAR 19.5, with a NAICS code of 811212 indicating repair and maintenance services. The solicitation was posted on July 23, 2026, with a firm response deadline of July 28, 2026, and is managed by the Strategic Acquisition Program Directorate under the Department of Defense. Performance will occur at an unspecified location, and the contract is issued through the DLA DIBBS platform.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Post-Delivery Inspection and Acceptance SupportThe contract requires on-site technical support for the inspection and acceptance of a reverse osmosis system at the Rolla CBOC, ensuring system functionality, water purity, and completeness meet required standards during government verification. The support must be provided by a qualified vendor present at the facility to assist with operational testing, documentation, and any necessary adjustments to satisfy acceptance criteria. This is a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified under SBA guidelines may respond, and it is classified under NAICS code 811212, which pertains to commercial and industrial machinery and equipment repair and maintenance. Proposals must be submitted by the deadline of July 28, 2026, and the opportunity was posted on July 23, 2026, through the Department of Veterans Affairs’ 255-NETWORK Contract Office 15. Performance is exclusively located at the Rolla facility with ZIP code 65401, and no additional office address or point of contact details are provided in the data. The scope is narrowly focused on post-delivery inspection activities, with no indication of procurement, installation, or long-term maintenance responsibilities beyond the acceptance event.

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

More opportunities from Department Of Commerce Nist

Same awarding agency

Manufacturing Execution SystemThe National Institute of Standards and Technology (NIST) is conducting market research to identify commercial solutions for integrating Additive Manufacturing (AM) systems with Manufacturing Execution Systems (MES), aiming to establish a standardized, interoperable framework that enables scalable industrial AM production. The research focuses on comparing two integration approaches: a standards-based pathway using a neutral information model developed by NIST, and an AI-assisted point-to-point method leveraging Large Language Models to generate integration code directly from API documentation. The goal is to evaluate and quantify differences in effort, reliability, semantic accuracy, and recovery from system changes between these approaches using NIST-owned EOS 290 and Renishaw RenAM500 machines and their emulators. Respondents must demonstrate capability to provide MES software that is compatible with these specific AM systems, offers open APIs suitable for AI-driven code generation, and includes emulator support for testing environments. Contractors are expected to support four key tasks: aligning their MES and AM system APIs with NIST’s neutral information model and building translation layers; developing middleware and validation layers to implement the standards-based integration path; evaluating and deploying AI tools to generate direct integration scripts without the neutral model, including documenting errors or hallucinations in AI output; and conducting comparative testing by running standardized and AI-generated integration pathways under controlled conditions, including stress tests where API fields are intentionally altered to assess robustness. Responses must include company details, product specifications, U.S. or foreign manufacturing origin, Small Business status, NAICS code validation, commercial terms, and contract availability—all without revealing proprietary information. Responses are limited to three pages and must be submitted by August 7, 2026, to the designated NIST contacts. This notice is strictly for market research and does not constitute a solicitation or obligation to award a contract.

Custom Computer Programming Services

POSTED

about 12 hours ago

DEADLINE

Subscription to Industry StudiesThe contract is for a subscription service to a web portal offering a comprehensive online research repository focused on U.S. manufacturing industries and emerging technologies. This service will provide authoritative data and analysis to support research and decision-making within the manufacturing sector and related technological advancements. The solicitation, titled Subscription to Industry Studies, is being issued by the National Institute of Standards and Technology under the U.S. Department of Commerce and carries the solicitation number 1333ND26QNB480367. No set-aside provisions apply, making it open to all eligible vendors. The North American Industry Classification System code is 541910, which covers other scientific and technical consulting services. The contract opportunity was posted on July 24, 2026, with responses due by August 7, 2026, at 3:00 p.m. Eastern Time. Performance will occur in Gaithersburg, Maryland, where the NIST office is located. Primary point of contact is Robert Singman, reachable at 301-975-6388 or robert.singman@nist.gov, with Monica Brown as the secondary contact at 301-975-0642 or monica.brown@nist.gov. Further details and the official solicitation document can be accessed via the SAM.gov portal linked in the contract data.

Marketing Research and Public Opinion Polling

POSTED

about 12 hours ago

DEADLINE

Manufacturing Data Analysis and Modeling ToolsNIST’s Manufacturing Extension Partnership seeks a commercial off-the-shelf web-based data tool to enhance its understanding of U.S. manufacturing at granular levels, including NAICS industries, county and state geographies, and SOC occupational codes. The tool must deliver dynamic, timely, and actionable manufacturing data to help NIST MEP and its nationwide network of centers identify emerging trends, anticipate sectoral shifts, and proactively prepare for changes affecting U.S. manufacturers. The solution must support data projection and advanced analytics beyond basic reporting, enabling users to forecast developments and make informed strategic decisions across the manufacturing ecosystem. The contract requires a hosted, web-accessible platform obtainable via site license, ensuring scalability and broad access for NIST MEP staff and partner centers. The solicitation, numbered 1333ND26QNB480368, is issued by the Department of Commerce under NAICS code 513210, with responses due by August 7, 2026. Performance will be based in Gaithersburg, Maryland, and inquiries should be directed to Robert Singman or Monica Brown. The opportunity is open without set-aside restrictions, targeting vendors capable of delivering a robust, ready-to-deploy analytics solution aligned with the program’s data-driven mission to strengthen U.S. manufacturing.

Software Publishers

POSTED

about 12 hours ago

DEADLINE

Extended Manufacturer Warranty and Technical SupportThe contract titled Extended Manufacturer Warranty and Technical Support requires the provision of comprehensive post-installation services for equipment, including extended warranty coverage, remote diagnostics, repair services, and supply of genuine spare parts. All services must adhere to defined service level agreements with guaranteed response times, ensuring timely resolution of technical issues to maintain system uptime and operational continuity. The work is performance-based and focused on sustaining equipment reliability over the warranty period through proactive and reactive technical support. The subcontract is issued by the Department of Commerce NIST and is set to be performed in Boulder, Colorado, with a zip code of 80305. It was posted on July 23, 2026, and responses are due by August 2, 2026. The North American Industry Classification System code 811212 indicates this effort falls under the category of electronic and precision equipment repair and maintenance. There is no set-aside designation specified, and the contract is open to eligible subcontractors capable of meeting the technical and service requirements outlined in the solicitation.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

On-Site Technical Training for Laboratory PersonnelThis contract requires the provision of on-site technical training for personnel at the National Institute of Standards and Technology in Boulder, Colorado, focused on the operation, optimization, alignment, and troubleshooting of UV doubling systems. The scope includes delivering hands-on instruction tailored to laboratory staff, along with comprehensive training materials to support learning and long-term application of the skills. The work must be performed at the specified location and is structured as a subcontract under the NAICS code 611430, which corresponds to other professional and technical training. The solicitation was posted on July 23, 2026, with a response deadline of August 2, 2026, at 5:00 PM, indicating a narrow window for submissions. The contracting entity is the Department of Commerce through its NIST division, and all activities are expected to meet the technical standards and operational needs of the federal laboratory environment.

Professional and Management Development Training

POSTED

DEADLINE

Spare Doubling Crystals SupplyThe contract calls for the supply of two drop-in replacement nonlinear optical crystals, specifically designed for ultraviolet frequency doubling at 267.8 nm, and must be fully compatible with the existing primary optical system. These crystals, typically made from materials such as BBO or LBO, are critical components for maintaining the performance and operational continuity of the system, and the supplier must ensure exact mechanical, optical, and thermal specifications to enable seamless integration without system recalibration. The crystals must meet stringent performance standards to preserve beam quality and conversion efficiency under operational conditions. This subcontract is issued by the National Institute of Standards and Technology under the U.S. Department of Commerce, with performance required in Boulder, Colorado, and a response deadline of August 2, 2026. The North American Industry Classification System code 325998 indicates the contract falls under other chemical product and preparation manufacturing, suggesting the supplier must have specialized capabilities in crystal growth, polishing, and coating technologies. The solicitation does not specify a set-aside classification, and no point of contact is listed, but all proposals must be submitted through the SAM.gov portal prior to the stated deadline to be considered.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

UV Optical Frequency Doubling System Design and ManufacturingThe contract seeks the design, assembly, and testing of two UV optical frequency doubling systems capable of converting 535.6 nm light to 267.8 nm with a minimum output power of 15 mW. The systems must demonstrate high stability and long-term robustness, ensuring consistent performance without requiring realignment over extended operational periods. The technology must be engineered for reliability under real-world conditions, with attention to thermal, mechanical, and environmental factors that could affect nonlinear optical efficiency and beam quality. The work is a subcontract under the Department of Commerce, National Institute of Standards and Technology, with performance required in Boulder, Colorado, 80305. The solicitation was posted on July 23, 2026, and proposals must be submitted by August 2, 2026. The NAICS code 334516 indicates the work involves manufacturing instruments and related products for measuring, testing, and analyzing optical properties. The project emphasizes precision engineering and validated performance metrics, targeting applications demanding stringent optical stability and durability in a laboratory or instrumentation environment.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Small Business Outreach and Subcontracting Coordination

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

User Training and Technical Support for AI Tools

Other Computer Related Services

POSTED

DEADLINE

AI Model Training and Customization for Federal IP Systems

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

AI-Powered Technology Transfer Platform Integration

Computer Systems Design Services

POSTED

DEADLINE

AI/ML Software Licensing and Subscription Management

Software Publishers

POSTED

DEADLINE