Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on June 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Paving and Asphalt Services

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237310
New
SLED
Fisherman’s Terminal (FT) Entry and Exit Paving RedevelopmentThe Fishermen’s Terminal Entry Redevelopment Project will revitalize the entry and exit drives along 19th Ave W, along with the former Downie Building (C-14) footprint and surrounding parking areas. Existing pavement in deteriorated condition will be milled and resurfaced, while aging stormwater infrastructure will be fully replaced and expanded to divert runoff from combined sewer lines into dedicated storm drainage systems, with water quality treatment incorporated where qualifying pavement surfaces are replaced. The remaining concrete slab from Phase 1 will be demolished to make way for a blended layout of new parking spaces and native green space designed as a pollinator habitat, potentially housing a stormwater treatment facility. An irrigation system will be installed to support the new landscaping, which will also extend to the median along the entry drive. New electric vehicle charging stations will be integrated into the expanded parking area, and a protected two-way bike lane will be constructed to connect the terminal’s entry directly to the West Wall bike path, enhancing multi-modal accessibility. Pedestrian pathways will be upgraded to improve connectivity to the intersection of 21st Ave W and W Emerson Pl, as well as the adjacent King County Metro bus stop. Lighting will be enhanced throughout the newly configured parking and path areas, and comprehensive wayfinding systems will be implemented to guide pedestrians and cyclists through the redeveloped campus. The project is forecasted to be solicited under NAICS code 237310 by the Port of Seattle’s Waterfront Project Management office, with primary contact information provided for project inquiries and coordination.
Waterfront Project Management

POSTED

about 8 hours ago

DEADLINE

N/A
NAICS: 237310
New
SLED
Asphalt Paving & Striping Unit Price Portwide 2026The contract encompasses a broad range of pavement and infrastructure maintenance activities across multiple Port of Seattle locations including Seattle-Tacoma International Airport, Maritime Properties, and adjacent areas. Work includes new asphalt paving and patching, overlays with fabric, crack sealing, seal coating, profile grinding, haul and disposal of grinding spoils, removal of existing striping, surface preparation for new markings, various stripe painting, saw cutting and coring of non-hazardous concrete and asphalt, installation of concrete wheel stops, curb repair and replacement, sidewalk lifting and leveling, and drainage system enhancements. All work requires adherence to performance standards and may involve obtaining necessary permits for improvements to public infrastructure. This procurement is issued under the title Asphalt Paving & Striping Unit Price Portwide 2026 by the Port Construction Services division of the Port of Seattle. The solicitation is posted as a forecast with a NAICS code of 237310 indicating highway and street construction. Primary point of contact is Heather Bowden, with Lesley Miles serving as project manager; inquiries should be directed via their provided email addresses and phone numbers. The contract will be administered across numerous port-wide sites with performance expected to meet specified technical and safety requirements, though no specific location details are provided in the data. The forecast date of July 31, 2026, suggests this is a planning notice for future work, not an active solicitation.
Port Construction Services

POSTED

about 8 hours ago

DEADLINE

N/A
NAICS: 237310
New
LACSD Surface Water PFAS Removal Project No. 251, CA
Solicitation # lacsd-surface-water-pfas-removal-project-no-251-ca
The contract involves the design and construction of PFAS treatment facilities at the Bernina and Cedar Glen Water Treatment Plants in California, encompassing comprehensive civil, structural, mechanical, electrical, instrumentation, and process upgrades to implement effective contaminant removal. The scope of work requires integration of advanced treatment technologies to meet regulatory standards for per- and polyfluoroalkyl substances, with emphasis on system reliability, long-term operational efficiency, and compliance with state and federal environmental guidelines. All phases of the project—from planning and engineering to construction and commissioning—must be executed to stringent quality and safety benchmarks. This solicitation, issued by Pyramid Building & Engineering, Inc. under the designation LACSD Surface Water PFAS Removal Project No. 251, CA, is targeted toward Disadvantaged Business Enterprises as part of a Department of Transportation initiative, with NAICS code 237310 for water and wastewater line and structure construction. Proposals are due by September 3, 2026, and the primary point of contact for inquiries is John Garrison, reachable via email and phone. The work must be performed entirely within California, with no specified city or zip in the performance location, indicating broad coordination across the service area. The solicitation is publicly accessible through the SBA’s opportunity portal, emphasizing transparency and equitable access for eligible contractors.
Pyramid Building & Engineering, Inc.

POSTED

about 13 hours ago

DEADLINE

in 30 days
NAICS: 237310
New
NCMT Berth 24-11 Structural Repair
Solicitation # ncmt-berth-24-11-structural-repair-0
The contract involves the comprehensive rehabilitation of the existing concrete marginal wharf at National City Marine Terminal Berth 24-11, including the reinstallation of the shore power system as detailed in the contract drawings and specifications. All labor, materials, equipment, and incidental services necessary to complete the work must be furnished by the contractor. A wide range of specialized scope items are designated for subcontracting, including demolition and disposal, asbestos remediation, concrete coring and sawing, contaminated soil testing and removal, diving services, electrical and utility work, environmental monitoring, LIDAR surveying, materials testing, metal fabrication, reinforcing steel installation, storm drain and water utility modifications, treated timber disposal, and underwater pile jacketing. The project is classified under NAICS code 237310 and is administered by Kiewit Infrastructure West Co. with a strict deadline for responses set for August 6, 2026. The solicitation is open to Disadvantaged Business Enterprises, Disadvantaged Veteran Business Enterprises, Minority Business Enterprises certified by NMSDC, and Women Business Enterprises certified by WBENC, reflecting a strong emphasis on fostering diverse vendor participation in compliance with transportation and state-level contracting goals. Primary point of contact for inquiries is Brian Chon, reachable via phone and email provided.
Kiewit Infrastructure West Co.

POSTED

about 13 hours ago

DEADLINE

in 2 days
NAICS: 237310
New
Lampasas Ave & Rio Linda Blvd Safety Improvements Project
Solicitation # lampasas-ave-rio-linda-blvd-safety-improvements-project
The City of Sacramento has initiated the Lampasas Ave & Rio Linda Blvd Safety Improvements Project to enhance traffic safety and infrastructure at the intersection of these two major thoroughfares. The project, identified by bid/contract number T15205500, is being managed through a solicitation process managed by Ghilotti Construction Company, Inc., which serves as both the contracting entity and the primary point of contact for submissions. The work involves physical improvements to roadway design, signage, lighting, pedestrian crossings, or other safety enhancements aimed at reducing accidents and improving mobility for all users. The solicitation is open to certified Minority Business Enterprises and Woman Business Enterprises, requiring NMSDC and WBENC certifications respectively, to ensure equitable participation by underrepresented business owners. Proposals must be submitted by the deadline of August 5, 2026, and the project falls under NAICS code 237310, indicating it is related to highway and street construction. The location of performance is in Sacramento, California, and the primary contact for inquiries is the Estimating Department at Ghilotti Construction Company, reachable via phone or email. While the specific scope of construction details is not outlined in the provided data, eligible contractors are expected to comply with all city standards, safety regulations, and equitable procurement policies. Further information about the project and submission requirements can be accessed through the official solicitation portal.
Ghilotti Construction Company, Inc.

POSTED

about 13 hours ago

DEADLINE

in about 19 hours

AI Contract Overview

Show more

The contract seeks subcontractor services for grading, base preparation, and asphalt paving of roadways and access points across Alberta and Quebec, excluding the National Capital Region. Work under this agreement will involve site preparation and surface paving operations to meet specified engineering and durability standards for government infrastructure. The solicitation is issued under NAICS code 237310 for Highway, Street, and Bridge Construction and is categorized as a subcontract opportunity within the Department of National Defence, Government of Canada. Bidders must submit proposals by July 29, 2026, at 7:00 p.m. Eastern Time, with the opportunity posted on June 18, 2026. There is no set-aside designation specified, meaning competition is open to all eligible entities. Performance of the work is restricted to the designated geographic regions, and contractors are expected to comply with all applicable provincial and federal regulations governing construction activities. The opportunity is accessible via the Canada Buys portal for detailed technical and administrative requirements.

General Info

Subcontractor needed for roadway grading and asphalt paving in Alberta and Quebec, excluding National Capital Region, by July 29, 2026.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

237310 - Highway, Street, and Bridge ConstructionView NAICS

Place of Performance

Alberta, Quebec (except NCR), CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Grading, base preparation, and asphalt paving for roadways and access points.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

NAICS: 314994
New
International
POLYESTER FIBROUS CORD
Solicitation # W8485-279524
The Department of National Defence is procuring 120,000 feet of polyester fibrous cord under solicitation W8485-279524, with delivery required by February 18, 2027, to the 7 Canadian Forces Supply Depot in Edmonton, Alberta. The item, identified by UNSPSC 31152100, NSN 4020-01-593-3517, and part number DCCB-1800-YG, must be supplied in 80 spools of 1,500 feet each, with offering contractors required to clearly state the part number and NSCM/CAGE code for any equivalent or substitute product and provide a certificate of conformance from the original equipment manufacturer. The solicitation operates under a Lowest Price Technically Acceptable (LPTA) evaluation methodology, where all offers must satisfy mandatory technical criteria—including full compliance with specification details, traceability of materials, material condition, and acceptance of all contract terms—before price becomes the determining factor. The contract is fixed-price and non-segmented, with no options, renewals, or additional quantities permitted. Packaging must adhere to Canadian government green procurement policies, requiring reusable, recyclable, or returnable materials, with ISPM 15 compliance for any wood packaging; palletized shipments exceeding 0.566 cubic meters or 15.88 kilograms must use standard pallets with strict dimensional controls and clear labeling. Goods must be delivered FOB Destination, delivered duty paid, with the contractor responsible for all transportation costs, duties, and taxes. Inspection may occur at the supplier’s facility, but formal acceptance takes place at the delivery location, and the contractor remains liable for any non-conforming items even after acceptance. The contractor must maintain ISO 9001:2015 compliant quality systems, provide audit-ready documentation, and comply with ethical standards prohibiting bribes, conflicts of interest, and forced labor. No security clearance is required, and all submissions must be made via CPC Connect, mail, courier, or fax to the designated address by the August 11, 2026 deadline, with proposals required in both technical and financial volumes, along with completed declaration and submission forms. Invoices must include the client reference number and applicable financial codes, though payment processing details and specific invoicing systems are not identified. The Crown reserves the right to negotiate terms with
Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 24 hours ago

DEADLINE

in 8 days
View Details
NAICS: 423840
New
International
Spares for armament loaders
Solicitation # W8476-267174/A
The Department of National Defence is soliciting spare parts for armament loaders under solicitation number W8476-267174/A, with bids due by September 9, 2026. The requirement encompasses 77 firm quantity items and 88 optional quantity items, all destined for delivery to 25 CFSD Montreal and 7 CFSD Edmonton, with most items duplicated across both locations. Items include gearshafts, hydraulic and water pumps, brake components, bearings, valves, sensors, tires, accumulators, motors, and specialized components for vehicle systems, each defined by GSIN, NSN, part number, and NCAGE code, with substitutions permitted only if equivalent. Delivery is specified under DDP Incoterms 2020, and items must meet stringent packaging and marking standards: U.S.-based suppliers must comply with MIL-STD-2073 and MIL-STD-129, while Canadian contractors must adhere to Canadian Forces Packaging Specification D-LM-008-001/SF-001 and D-LM-008-002/SF-001, including mandatory labeling with manufacturer details, lot numbers, and shelf life dates. All items must have a minimum of 75% of their authorized shelf life remaining upon delivery, as mandated by CFTO D-05-001-001/SF-000, and quality must be maintained under ISO 9001:2015 with inspection records available for audit. Contract award will follow a lowest price Technically Acceptable (LPTA) model, where offers must meet all mandatory technical criteria including correct part numbers and NCAGE codes to be eligible, and only the lowest priced compliant offer will be selected. No contract value has been disclosed, and pricing is to be submitted per item with firm, fixed prices valid for the contract term. An irrevocable option exists for additional quantities to be exercised within 90 days of award. Contractors must certify compliance with anti-forced labor laws, prohibit contingency fees, avoid organizational conflicts of interest, and ensure no goods originate from sanctioned jurisdictions. All submissions must be made electronically via email to a designated address, with proposals structured into four sections including technical, financial, declaration forms, and additional supporting data, and must not exceed 5 MB per email. Debriefings may be requested within 15 working days of award notification.
Industrial Supplies Merchant Wholesalers

POSTED

about 24 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333995
New
International
Material Handling equipment
Solicitation # W8486-270811/B
The Department of National Defence is seeking bids for the supply of specialized material handling equipment components to be delivered by December 31, 2026, to two Canadian Forces Support Depots: 25 CFSD in Montreal and 7 CFSD in Edmonton. The requirement includes eleven distinct items ranging from automotive driving axle assemblies and sleeve bushings to electrical special-purpose cable assemblies, digital camera systems, and multiple linear actuating cylinder assemblies, each identified by specific GSIN, NSN, part numbers, and CAGE codes. Quantities vary per item, with the majority of components destined for Edmonton, while certain cylinders and the camera and cable assemblies are designated for Montreal. All bidders must submit proposals electronically via email to the designated government address, and equivalent or substitute products must be clearly identified with brand, model, part number, and CAGE code. The solicitation is open to bids in either of Canada’s official languages, and the contracting authority retains the right to negotiate with suppliers. Bidders must submit their offers by the deadline of September 8, 2026, and may request a debriefing within fifteen working days after bid results are communicated. The primary point of contact for the procurement is Karen Benedikt, Contracting Authority, reachable by phone and email.
Fluid Power Cylinder and Actuator Manufacturing

POSTED

about 24 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 333413
New
International
Mobile Cleanroom
Solicitation # W8485-269294/A
The Department of National Defence is seeking a fully integrated ISO maritime container-based mobile cleanroom designed as a self-contained, transportable Class B oxygen cleaning facility capable of executing full-cycle Naval Oxygen Cleaner operations. The unit must be engineered for reliable performance in demanding environments and include comprehensive support through design, manufacture, factory acceptance testing, delivery, commissioning, and training. It will be delivered to the Aerospace and Telecommunications Engineering Support Squadron at 8 Wing in Trenton, Ontario, and must adhere to all technical specifications outlined in Annex A, ensuring it meets stringent contamination control and operational requirements for naval applications. The Crown reserves the right to engage in negotiations with suppliers throughout the procurement process. The solicitation, identified as W8485-269294/A, was posted on August 2, 2026, with proposals due by September 3, 2026. Interested parties may submit documentation in either of Canada’s official languages. The procurement is managed by the Government of Canada through the Department of National Defence, with Sharon Sally serving as the primary contracting authority, reachable via email or phone. The place of performance is specified as Canada, Ontario excluding the National Capital Region, and the tender is accessible through the CanadaBuys portal. No set-aside classification applies, and the opportunity is open to all qualified suppliers meeting the technical and compliance criteria.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

2 days ago

DEADLINE

in about 1 month
View Details
NAICS: 334511
New
International
Controlled Goods Program (CGP) Compliance (Conditional)This contract requires strict adherence to Canada’s Controlled Goods Program for any resistance elements that are defense-related, mandating thorough personnel screening and rigorous recordkeeping to ensure compliance with national security protocols. All parties involved must be properly registered and cleared under the Controlled Goods Program, with ongoing oversight to verify that access to controlled goods is limited to authorized individuals only. The requirement applies regardless of location, but performance is specifically tied to operations in British Columbia and Nova Scotia, necessitating local compliance measures aligned with federal defense standards. Issued as a subcontract under the Department of National Defence, this opportunity is part of the Government of Canada’s procurement framework and is governed by NAICS code 334511, indicating focus on industrial machinery manufacturing with defense applications. The solicitation is open for responses until August 17, 2026, with submissions expected to demonstrate not only technical capability but also documented proof of CGP registration, implementation of screening procedures, and maintenance of audit-ready records. Failure to meet these conditions will result in immediate disqualification, as compliance is a non-negotiable prerequisite for contract award and execution.
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

4 days ago

DEADLINE

in 14 days
View Details