Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Piping Support & Hanger Fabrication/Installation

Active

State & Local

Response Deadline10/21/2026, 12:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Piping Support and Hanger Fabrication and Installation involves the supply and installation of hangers and supports for process piping on New York City Department of Environmental Protection projects. The scope of work includes installing supports for steel and stainless steel process piping to maintain stability and alignment, as well as installing physical protection shielding for hydraulic piping between the HPU and floor penetrations according to Section 40 05 07. The primary objective is to deliver a secured and supported piping network for prime contractors. This opportunity is categorized under NAICS code 238290 and is located in New York. The response deadline for this project is October 21, 2026.

General Info

Subcontract for piping support fabrication and installation for NYC DEP projects by October 2026.

Agency

New York → Department Of Environmental ProtectionView Agency

NAICS

238290 - Other Building Equipment ContractorsView NAICS

Place of Performance

New York, NY, USA

Set-Aside

NONE

Documents

This scope was carved out of 82626B0042.

The full solicitation package (9 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

82626B0042-BWT-WI-323 Reconstruction of MSP Cone Check Valves, Actuators and Discharge Piping at Wards Island WWTP

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 31

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 12:00:00 AM UTCin about 2 months

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNew York → Department Of Environmental Protection

ContactsNo contacts available

OfficeN/A

Organization / Agency

New York → Department Of Environmental Protection

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies and installs hangers and supports for process piping for prime contractors on NYC Department of Environmental Protection projects. Installs supports for steel and stainless steel process pipe to ensure stability and alignment, and installs physical protection shielding for hydraulic piping between the HPU and floor penetrations per Section 40 05 07. Delivers a secured and supported piping network.

Similar Contracts

Same NAICS industry code

J063--Automatic Door Opener Maintenance

Solicitation # 36C24727Q0013

The Department of Veterans Affairs, through Network Contract Office 7, is soliciting bids for the maintenance of automatic door openers under solicitation number 36C24727Q0013. This opportunity is specifically set aside for Service-Disabled Veteran-Owned Small Businesses under NAICS code 238290. The solicitation was posted on August 25, 2026, with a response deadline of September 4, 2026, at 5:00 PM. The contracting office is located in Augusta, Georgia, and the primary point of contact for this requirement is Contracting Officer Don Grier.

247-NETWORK Contract Office 7 (36C247)

POSTED

about 13 hours ago

DEADLINE

Trade Package - Cargo Building 626.1 - TP 0035 - SFO Cargo 626 Material Handling System Installation

Solicitation # 11918.66 -TP-0035

Clark Construction is managing the development of a core-and-shell two-story cargo building at the airport, which includes warehouse space, 28 active truck docks, 7 future docks, and leasable office space. The project involves the demolition of building 624 and the relocation of existing infrastructure to accommodate the new facility, which features a facade of insulated metal panels, glass, and polycarbonate. Trade Package TP-0035 specifically covers the mechanical installation of the Material Handling System. Bids for this scope of work are due by 2:00 PM on September 18, 2026, with a required LBE participation rate of 5%. Inquiries regarding this package should be directed to Nicolette Madonna at Clark Construction.

POSTED

DEADLINE

ACC Gate Replacement

Solicitation # 43ADG-S4000

The ACC Gate Replacement solicitation, numbered 43ADG-S4000, is issued by the Nevada Adjutant General and National Guard. The project involves modifying and retrofitting an existing manual sliding entry gate into an automated, access-controlled system. This scope of work encompasses necessary structural improvements, electrical installations, and trenching. The performance of this contract will take place in Nevada. Interested parties must submit their responses by the deadline of September 24, 2026. For further inquiries, the primary point of contact is Carlos Fuentes, the Purchaser.

431 - Adjutant General and National Guard

POSTED

DEADLINE

Elevator Maintenance and Repair at Various Locations

Solicitation # COC-CIFB-FY27-31166

The City of Cambridge Public Works department is soliciting bids for project COC-CIFB-FY27-31166, which involves elevator maintenance and repair at various locations, including specific electrical vault airway structural repairs at the Baldwin School. The estimated project value is 2,040,000 dollars, which includes two optional renewal years, though the contract award will be based on the Year One total. Bidders must be the lowest responsible and eligible party and are required to submit their proposals by September 24, 2026. Eligible contractors must provide a DCAMM certificate of eligibility and an update statement specifically in the elevators work category. The submission package must include a general bid form, bidder certifications, price proposals for the first year, and documentation regarding bonding commitments, safety compliance, and labor laws. All work is subject to prevailing wage requirements and requires performance and payment bonds. Primary contact for this solicitation is Vilsabel Selman, the Construction and Sustainable Procurement Specialist.

POSTED

DEADLINE

Elevator Renovation & Maintenance

Solicitation # 27-012

CalOptima Health is seeking proposals for Bid 27-012 regarding elevator renovation and maintenance services. This solicitation, identified by number 20260902024, is for a project located in Orange, California, within the 92868 zip code. The work falls under NAICS code 238290 and is being managed by a SLED organization. Interested parties must submit their responses by the deadline of October 13, 2026, at 9:00 PM. The primary point of contact for this opportunity is Lisa Ha, who can be reached via email. Further details and submission instructions are available through the provided bid portal link.

CalOptima Health

POSTED

DEADLINE

in about 1 month

Dry Dock Elevator Dismantle

Solicitation # N32253-26-Q-0069

Solicitation N32253-26-Q-0069 is a small business set-aside request for quotation for the dismantling and packaging for disposal of three legacy dry dock elevators at the Pearl Harbor Naval Shipyard and Intermediate Maintenance Facility in Hawaii. The scope of work includes the removal of two Champion Elevators (model US-10000-FP) and one Industrial Rack and Pinion Elevator, encompassing the towers, cars, counterweights, platforms, landings, and all associated electrical components. The tentative period of performance is from September 29, 2026, to September 28, 2027, under NAICS code 238910. The contractor must adhere to stringent safety, security, and environmental regulations, including the submission of a preliminary dismantle plan, an environmental protection plan within 45 days of award, and a safety and accident prevention plan. Key requirements include compliance with the Environmental Compliance Assessment, Training and Tracking System (ECATTS), strict hazardous material management, and adherence to specific waste packaging standards for asbestos, PCBs, and ozone-depleting substances. Operational requirements include following Code 410 crane and material handling equipment rules, maintaining U.S. citizenship for submarine access areas, and complying with OPSEC and security protocols for the Controlled Industrial Area. Quotes are due by September 10, 2026, at 9:00 am HST and must be submitted via email to the designated points of contact. All responding firms must be registered in the System for Award Management (SAM). A voluntary site visit is scheduled for August 25, 2026, with attendee names required by August 24, 2026. Evaluation and award will be conducted in accordance with FAR 52.212-2.

Pearl Harbor Naval Shipyard IMF

POSTED

DEADLINE

JBMDL - Above and Underground Tank Maintenance and Repair

Solicitation # FA448426R0016

Solicitation FA448426R0016 is a total small business set-aside for a single firm-fixed-price contract to provide labor, equipment, materials, and tools for the inspection, testing, certification, and repair of 12 underground storage tanks and 7 aboveground storage tanks at Joint Base McGuire-Dix-Lakehurst, New Jersey. The contract includes a base period from October 1, 2026, to September 30, 2027, with four subsequent option years. The scope of work encompasses monthly, annual, and triennial inspections, emergency service calls, and both minor and major repairs in compliance with EPA standards, Air Force Instructions, and UFC 3-460-03. Award will be based on the Lowest Price Technically Acceptable (LPTA) method, requiring offerors to provide proof of state licenses and federal or state certifications for technicians, such as SP001 AST Inspector Certification and Fire/HAZMAT safety training. Contractors must adhere to strict security and safety protocols for installation access, including criminal background checks, DBIDS card issuance, and antiterrorism awareness training. Performance will be monitored by a Contracting Officer's Representative through a Quality Assurance Surveillance Plan, and the contractor is required to submit a written quality control plan and a Contractor Mission Essential Plan. Invoicing and payment must be processed electronically via the Wide Area Workflow system. Labor pricing must comply with the Service Contract Act and specific wage determinations for Burlington County, New Jersey. All proposals must be submitted electronically via SAM.gov, including a completed labor worksheet and a pricing schedule spreadsheet.

FA4484 87 Cons Pk

POSTED

DEADLINE

PROVIDE AND INSTALL 75KW GENERATOR for Base Alameda CA

Solicitation # 31090PR260000366

Solicitation 31090PR260000366 is a request for quote for the Department of Homeland Security to provide and install one 75kW standalone diesel generator and a new automatic transfer switch at Building 43, USCG Base Alameda in California. This is a total small business set-aside under NAICS 238290. The scope of work includes the removal and disposal of the existing generator, installation of the new unit on an existing foundation pad, and subsequent testing. The generator must be three-phase, 120-240V, 60Hz, feature a silent enclosure with internal containment, and be rated Tier 2 or Tier 3 to meet environmental and air quality standards. All work must be performed by a licensed technician in compliance with OSHA regulations and the Coast Guard’s Safety and Environmental Health Manual. The government will award a single contract to the responsible vendor offering the lowest price that is deemed technically acceptable. The period of performance is 90 days from the date of award, with work hours restricted to 0700 to 1700, Monday through Friday. Offerors must be registered in SAM.gov and submit their quotes via email on company letterhead to the designated points of contact. Required submissions include technical specifications, total pricing including shipping, and an estimated delivery date. Following the award, the contractor must provide cut sheets within 15 calendar days, as well as operation manuals, warranty documentation, and maintenance training upon delivery. Per Amendment 001, the deadline for offer submission is September 11, 2026, at 1:00 PM EDT.

Base ALAMEDA(00031)

POSTED

DEADLINE

H--ELEVATOR INSPECTIONS AT FORT NECESSITY NATIONAL BA

Solicitation # 140P4226Q0050

Solicitation 140P4226Q0050 is a request for firm fixed-price quotes to provide elevator inspection services for the National Park Service at Fort Necessity National Battlefield and Friendship Hill National Historic Site in Farmington, Pennsylvania. The scope of work includes monthly and annual inspections, with specific requirements for yearly Pennsylvania state inspections for the elevator at Fort Necessity. The contract is a total small business set-aside under NAICS code 238290. The period of performance spans from September 28, 2026, to September 27, 2031, consisting of a base year and four optional one-year extension periods. Award is based on a three-factor evaluation: technical capability, contractor compliance, and pricing. Technical capability requires a detailed approach document, relevant licenses, and evidence of at least three similar projects completed within the last five years. Compliance requires an active SAM registration and the submission of specific FAR certifications, including biobased product certification. All work must adhere to the American Standard Safety Code for Elevators, Dumbwaiters and Escalators, and personnel must comply with Service Contract Act wage determinations for elevator repair in Pennsylvania. Invoicing is managed electronically through the Department of Treasury's Invoice Processing Platform.

Ner Services Mabo (43000)

POSTED

DEADLINE

Imperial County Courthouse Elevator UpgradeThe Judicial Council of California is forecasting a project for the modernization of one existing hydraulic passenger elevator at the El Centro Courthouse in California. The scope of work involves replacing the hydraulic power unit, cylinder, jack assembly, valves, controls, and all associated mechanical and electrical systems within the machine room and hoistway. While the existing elevator cab will be retained, interior components and finishes will be evaluated and replaced as necessary. This project focuses on upgrading internal systems to accommodate new equipment without altering the building footprint, structure, or hoistway dimensions. The primary point of contact for this effort is Senior Analyst Janell Ramirez.

Judicial Council of California

POSTED

DEADLINE

25-287580.FMD.RollUpDoorMaintenance

Solicitation # CR-25-287580

The California Department of General Services, through its Facilities Management Division, is seeking a contractor to provide maintenance and repair services for roll-up doors on state property. This procurement is conducted under the authority of Government Code Section 14685(a) to ensure the proper upkeep of state buildings and grounds. The solicitation, identified as 0000040263, was posted on September 3, 2026, with a response deadline of September 22, 2026. The primary place of performance is located in Sacramento, California, and the point of contact for this opportunity is Wevina Rist.

California Department of General Services

POSTED

DEADLINE

Athletic Field Equipment Supply and Installation

Ventura Unified School District

POSTED

DEADLINE

in about 1 month

More opportunities from New York → Department Of Environmental Protection

Same awarding agency

Mechanical & Electrical DemolitionThis subcontract for the New York City Department of Environmental Protection involves the removal and demolition of existing mechanical and electrical systems. The scope of work includes the disconnection and disposal of piping, motors, and electrical components, ensuring the site is cleared and ready for new installations while adhering to all agency safety and environmental regulations. The project is categorized under NAICS code 238910 and is located in New York City. Interested parties must respond by the deadline of October 21, 2026, following the posting date of August 31, 2026.

Site Preparation Contractors

POSTED

DEADLINE

in about 2 months

Low Voltage Electric Motor Supply & InstallationThis subcontract for Low Voltage Electric Motor Supply and Installation supports prime contractors on New York City Department of Environmental Protection projects. The scope of work involves the supply and installation of MSP motors and associated electrical accessories, including enclosed switches, contactors, and overload relays. All installations must be performed using UL Standard No. 98/508 and NEMA KS-1/ICS equipment to ensure the delivery of fully operational electric motor systems. Compliance with NFPA 70 and the NYC Electrical Code is mandatory for all work performed. The project falls under NAICS code 238210 and is located in New York. Interested parties must submit their responses by the deadline of October 21, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

in about 2 months

Industrial Painting & Specialized CoatingThis subcontract for the New York City Department of Environmental Protection involves industrial painting and the application of specialized coatings to protect piping systems against corrosion. The scope of work includes applying Ceramapure PL90 ceramic epoxy lining to a minimum thickness of 40 mil, painting steel and stainless steel process pipes according to Section 09 91 00, and performing pickling and passivating of stainless steel pipe. All work must comply with AWWA C210 standards. The project is located in New York City and falls under NAICS code 238320. The response deadline for this opportunity is October 21, 2026.

Painting and Wall Covering Contractors

POSTED

DEADLINE

in about 2 months

Process Piping Installation (Steel & Stainless Steel)This subcontract involves the installation of steel and stainless steel process piping for prime contractors working on New York City Department of Environmental Protection projects. The scope of work includes the installation of Type 316 stainless steel seamless pipe via butt or socket welding, as well as the installation of hydraulic oil piping and isolation valves. To ensure system integrity, the contractor must perform leak tests and flushing in accordance with ISO 18-16-14. The project requires strict adherence to ANSI/ASME B 31.1 and the NYC Building Code to deliver a fully installed, tested, and flushed process piping system. This opportunity is categorized under NAICS code 238220 and is located in New York. The response deadline for this solicitation is October 21, 2026.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 2 months

82626B0042-BWT-WI-323 Reconstruction of MSP Cone Check Valves, Actuators and Discharge Piping at Wards Island WWTP

Solicitation # 82626B0042

The New York City Department of Environmental Protection is soliciting competitive sealed bids for contract WI-323 (EPIN 82626B0042) to perform the reconstruction of six Main Sewage Pumps (MSPs) at the Wards Island Wastewater Resource Recovery Facility. The scope of work includes the demolition and replacement of MSP motors, cone check valves, actuators, suction elbows, and discharge piping. The project requires the contractor to provide all necessary labor, materials, and equipment, including the design and installation of temporary ventilation and cofferdams. Final acceptance is contingent upon a successful 24-hour run test at rated capacity followed by a two-week operational period under normal conditions by DEP personnel. Bids must be submitted electronically via the PASSPort portal by October 21, 2026, at 2:00 PM EST; paper submissions are not acceptable. The contract will be awarded to the lowest responsive and responsible bidder. Key requirements include registration with the New York State Department of Labor Contractor and Subcontractor Registry, adherence to NYC prevailing wage rates, and the submission of a bid bond. Contractors must also provide a detailed MWBE Utilization Plan and identify subcontractors for electrical, HVAC, and plumbing work. Pricing is structured through lump sum items for mechanical and electrical installation, demolition, and demobilization, with specific caps on mobilization and demobilization costs relative to the total bid price.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

in about 2 months

Prevention through Design (PtD) Consulting

Engineering Services

POSTED

DEADLINE

EHS Training Development & Delivery

Professional and Management Development Training

POSTED

DEADLINE

Occupational Health & Safety (OHS) Field Support

Environmental Consulting Services

POSTED

DEADLINE

Environmental Field Support & Monitoring

Environmental Consulting Services

POSTED

DEADLINE

Industrial Hygiene (IH) Field Services

Environmental Consulting Services

POSTED

DEADLINE

EHS Management System Auditing & Program Development

Environmental Consulting Services

POSTED

DEADLINE

Solicitation # 82626P0029

The New York City Department of Environmental Protection is seeking a consultant to provide Environmental Health and Safety (EHS) Management Services to augment the Bureau of Engineering Design and Construction. This as-needed, task-order based contract involves a variety of specialized services, including EHS management system auditing, program development, field support, incident investigation, and technical design support. The consultant will also be responsible for developing and presenting EHS training on topics such as confined spaces, fall prevention, and OSHA-10/30 requirements. The anticipated contract term is 1,095 calendar days, with an emphasis on compliance with BEDC EHS standards and federal regulations such as 29 CFR 1910. The procurement process is managed through the PASSPort portal, with a technical evaluation based on organizational capability (40%), experience (30%), and technical approach (30%). A 5% point preference is available for certified M/WBE or DBE proposers. Award selection is based on the most advantageous proposal, where the highest technically ranked firm will enter price negotiations. Key personnel requirements include a Project Director, Project Manager, EHS Professional, CM Site Safety Officer, ISO-trained Auditor, and a Prevention through Design Specialist. Financial constraints include a maximum hourly rate of $420.00, with caps on compensation for principals (35% of the maximum contract amount) and subconsultants (49% of the maximum contract amount).

Environmental Consulting Services

POSTED

DEADLINE