Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Plumbing and Piping Systems Installation

Active
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the installation of sanitary, storm, and water supply piping systems along with associated fixtures and drainage infrastructure, scoped under the NAICS code 238220 for plumbing, heating, and air-conditioning contractors. This is a subcontract opportunity issued by the California Department of Corrections & Rehabilitation with a performance location in Kern, California. The solicitation was posted on July 16, 2026, and responses are due by August 5, 2026, at 7:00 PM Pacific Time. The work involves full system integration to meet functional and regulatory standards for institutional facilities under the agency’s jurisdiction. There is no specified set-aside designation, and the contract is not tied to a particular procurement category beyond its classification as a subcontract. All work must be executed in alignment with applicable state and local codes, and the successful bidder will be responsible for sourcing materials, labor, and ensuring system compliance from initial installation through final inspection.

General Info

Install sanitary, storm, and water supply systems in Kern, California, by August 5, 2026, per state codes.

Agency

California Department of Corrections & RehabilitationView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Kern, CA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyCalifornia Department of Corrections & Rehabilitation
ContactsNo contacts available
OfficeN/A
Organization / Agency
California Department of Corrections & Rehabilitation
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of sanitary, storm, and water supply piping systems, including fixtures and drainage.

Similar Contracts

Same NAICS industry code

NAICS: 238220
New
SLED
HVAC Repair Services, System Diagnostics, and Preventive Maintenance Austin State Supported Living CenterThe Health and Human Services Commission is seeking qualified vendors to provide comprehensive HVAC repair services, system diagnostics, and preventive maintenance for approximately 500 units of equipment at the Austin State Supported Living Center located at 2203 W. 35th Street in Austin, Texas. This solicitation requires bidders to attend at least one of two mandatory on-site visits scheduled for July 21 and July 22, 2026, at 10:00 AM Central Time; failure to attend in person and sign the attendance log will result in disqualification. Vendors must check in with security upon arrival and are encouraged to notify the onsite contact, Thomas Chavez, of their attendance. All participants in pre-bid meetings, including conference calls and webinars, must provide their legal business entity name, representative names and titles, and point of contact email to be included in the official attendance record. Requests for clarification must be submitted by July 23, 2026, with responses and addenda posted by July 27, 2026, and a courtesy review of HUB Subcontracting Plans is due by July 28, 2026. Responses to the solicitation are due by August 7, 2026, at 10:30 AM Central Time, with an anticipated contract start date of September 1, 2026. ADA accommodations can be requested at least 72 hours in advance by contacting the sole point of contact listed in the documentation.
Health and Human Services Commission

POSTED

about 11 hours ago

DEADLINE

in 20 days
View Details
NAICS: 238220
New
International
LLM26025 - Saskatchewan Polytechnic Moose Jaw - Chiller ReplacementThe Government of Saskatchewan, through SaskBuilds and Procurement, is inviting qualified suppliers to submit bids for the replacement of the chiller at Saskatchewan Polytechnic’s Moose Jaw campus under solicitation number 316-2026. The project requires the supply and installation of a new chiller unit, including the removal and proper disposal or recycling of the existing system, salvage of the compressor installed in 2025, restoration of the roof beneath the unit, crane installation of the new chiller onto the roof, and full mechanical, electrical, and controls integration with the building’s existing infrastructure. All work must result in a fully operational HVAC system compliant with project specifications. A non-mandatory Pre-Tender Site Meeting is available for bidders to gain further insight into the site conditions and requirements. Bidders must be registered on the Government Enterprise Management (GEM) system to access competition documents, submit questions, receive updates, and formally submit their bids. The opportunity was posted on July 17, 2026, and responses are due by August 12, 2026. All amendments and communications will be issued exclusively through the GEM portal. For registration or technical assistance, suppliers are directed to the GEM website and may contact Tina Munro at rfxquestions@gov.sk.ca.
SaskBuilds and Procurement

POSTED

about 16 hours ago

DEADLINE

in 25 days
View Details
NAICS: 238220
New
SLED
Volusia County Branch Jail Air Handler-Fire Suppression System Removal, Replacement and UpgradeVolusia County is undertaking a comprehensive, integrated renovation of its Branch Jail facility in Daytona Beach to replace aging and noncompliant building systems that have reached end-of-life. The project involves full replacement of all chilled water air handling units, fire and smoke dampers, the obsolete building automation system, and the fire alarm system, all of which are no longer functional, supported, or code-compliant for a detention environment. The existing HVAC infrastructure, including interconnected ductwork and damper relay panels, is degraded and lacks the ability to isolate smoke events to individual housing pods, posing significant life safety risks. The fire alarm system fails to meet current standards including the Florida Fire Prevention Code, NFPA 72, NFPA 101, and UL 864, and cannot support the required redundant fiber optic loop architecture. All systems will be upgraded simultaneously to modern, UL-rated, corrosion-resistant components with full per-pod smoke isolation and purge capability, integrated into a new, expandable Compass Controls building automation system. Work will be executed while the facility remains fully occupied, requiring strict coordination with security, implementation of fire watch protocols, phased construction, and temporary cooling solutions to maintain operational safety. The County has engaged Above Group Engineering & Consulting as mechanical engineer of record and Dewberry Architects Inc. as architect of record to deliver this high-stakes, single-phase upgrade under solicitation number 26-B-110IF, with proposals due by August 20, 2026.
Corrections

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details

More opportunities from California Department of Corrections & Rehabilitation

Same awarding agency

NAICS: 811310
New
SLED
C5613490-D, Vehicle Lift Preventative Maintenance, Inspection, Testing, and Repair ServicesThe Contractor is required to perform comprehensive preventative maintenance, inspection, testing, and repair services for vehicle lifts at Kern Valley State Prison in Delano, California, under a contract that extends through September 30, 2026. Services must be conducted during normal business hours Monday through Friday, excluding state holidays, and all work must be scheduled in coordination with the Institution Contract Liaison. Compensation is based on fixed rates outlined in Exhibit B-1, which includes all labor, travel, per diem, materials, equipment, tools, permits, and incidental expenses necessary to complete the work. The scope includes preventative tasks such as cable adjustments, anchor torquing, and lubrication of components, as well as safety inspections with the placement of signed inspection stickers and operational testing. Repairs are performed on an unlimited basis upon request, requiring a separate repair proposal for each lift and a completed Service Report (Exhibit A-2) for approval before payment. All services must comply with OSHA, ANSI, and Automotive Lift Institute standards, and each technician must hold a valid California C-61 Limited Specialty license with a D-21 Machinery and Pumps classification, an ALI Lift Inspector Certification, and at least three years of qualifying experience within the past five years. Apprentices and trainees are prohibited. The Contractor must comply with stringent security and access protocols, including submitting a Gate Clearance request at least ten working days in advance for all personnel, providing social security numbers, state ID or driver’s license numbers, and dates of birth, and adhering to strict prohibitions on electronic devices such as cell phones and cameras on prison grounds. All personnel must also meet California’s prevailing wage requirements and comply with the Drug-Free Workplace Act of 1990 and state nondiscrimination statutes. Financial incentives are available for Disabled Veteran Business Enterprises (DVBE), with net bid prices reduced by up to 5% or $500,000 based on participation levels, and up to a 5% preference for non-small businesses subcontracting at least 25% to certified small or micro businesses. The award follows a lowest responsive and responsible bidder model, with responsiveness including adherence to all submission requirements, such as the Bidder Acknowledgment (OBS 300), Rate Sheet, certifications, license copies, and GenAI disclosures. Invoicing must be submitted electronically to a designated CDCR email with a PDF attachment, itemizing parts and labor and always accompanied by an approved Service Report. Payment is contingent upon written
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

1 day ago

DEADLINE

in 18 days
View Details
NAICS: 423690
New
SLED
SCADA System Parts and Component SupplyThe contract involves the supply of OEM or approved replacement parts for GE Fanuc and Allen Bradley SCADA systems, covering essential components such as processors, I/O modules, power supplies, and software licenses. This subcontract is issued by the California Department of Corrections & Rehabilitation to ensure the continued operational integrity of critical SCADA infrastructure through the provision of authentic, compliant, and functional hardware and software components. All supplied parts must meet specified technical standards and be sourced from authorized manufacturers or approved alternatives to guarantee reliability and compatibility within existing systems. The solicitation is open for response until July 31, 2026, and is classified under NAICS code 423690, which pertains to other commercial equipment merchant wholesalers. The contract does not specify a set-aside designation or additional demographic preferences, and the place of performance and point of contact details are not provided. Prospective vendors must be prepared to fulfill requirements consistent with state procurement protocols and deliver parts that support seamless integration into the department’s existing industrial control environment. The opportunity is available through the California eProcurement portal for qualified suppliers seeking to provide mission-critical automation components.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 14 days
View Details