Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on July 16, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Plumbing and Piping Systems

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238220
New
CBP5933 Bldg. 225 HVAC Replacement
Solicitation # CBP5933
Management & Training Corporation (MTC) is soliciting bids for a fixed-price, single lump sum subcontract to replace six split-system heat pump HVAC systems at Building 225 of the San Diego Job Corps Center in Imperial Beach, California. The scope of work includes the installation of three 2-ton and three 1.5-ton Payne heat pump systems with matching indoor air handlers, including the removal and disposal of old equipment and the commissioning of new systems. The project must be completed within 30 consecutive business days following a written Notice to Proceed. Bids are due by September 11, 2026, and will be evaluated based on overall best value, considering price, quality, and delivery schedule. The estimated price range for the contract is between 25,000 and 100,000 dollars. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and VOSB. Bidders must provide a bid bond of at least 20 percent of the base bid if the total is 25,000 dollars or more, and performance and payment bonds from an A-rated surety will be required upon award. Compliance with the Davis-Bacon Act is mandatory, requiring adherence to prevailing wage rates and federal paid sick leave standards. Submissions must include the MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, and a UEI number. Final acceptance is contingent upon a written final inspection, submission of a Notice of Final Completion, certified payroll reports, and the delivery of two sets of operation and maintenance manuals.
San Diego Job Corps Center

POSTED

about 19 hours ago

DEADLINE

in 10 days
NAICS: 238220
New
RFQ#3191 Laundry Tray Installations
Solicitation # RFQ#3191
Management & Training Corporation (MTC) is soliciting bids under RFQ #3191 for a subcontracting opportunity to provide plumbing services at the Charleston Job Corps Center in West Virginia. The project requires the contractor to provide all labor, materials, and supervision to remove existing units and install new laundry trays and faucet sets in the Education and CTT restroom areas. The scope includes installing fixtures on Everform Graphite Terrazzo Matrix countertops, reconnecting hot and cold water supply lines and drainage systems, and ensuring all connections are watertight. The contractor is responsible for testing all fixtures for proper flow and drainage and removing all debris from the work area upon completion. Bids are due by September 11, 2026, at 3:00 PM EST, with a pre-bid meeting scheduled for September 3, 2026. To be considered for the award, applicants must submit a lump sum bid sheet, proof of insurance, three references for similar projects, and a completed supplier packet including a W-9 and self-certification form. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB, under NAICS code 238220. The contract is subject to Service Contract Labor Standards wage determinations and requires compliance with local plumbing codes and Job Corps facility standards. Additionally, subcontractors must provide a Unique Entity Identification number for reporting purposes under FAR 52.204-10 for projects valued at $40,000 or more.
Management & Training Corporation

POSTED

about 19 hours ago

DEADLINE

in 10 days
NAICS: 238220
New
This is a subcontracting opportunity to replace a chiller in McKinney, TX.
Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx
Serrato Corporation is seeking bids for a subcontracting opportunity to replace a failing air-cooled chiller at the North Texas Job Corps Center, specifically in Building 214/215 located in McKinney, Texas. The scope of work includes the demolition and disposal of the existing chiller, installation and startup of a new air-cooled chiller, and the integration of building automation controls featuring a JACE 9000 central integration point with a graphical user interface. Additionally, the project requires the cleaning and inspection of air handling units, the replacement of three VFDs, and the installation of control valves for four air handling units. The solicitation is open to various small business set-asides, including SDB, WOSB, HUBZone, VOSB, and SDVOSB. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars, and a Certificate of Liability Insurance naming Serrato Corporation as the holder. Insurance requirements include a 1 million dollar combined single limit for Commercial General Liability and Comprehensive Automobile Liability, and a 500,000 dollar limit for Employers Liability. Primary points of contact for this effort are Stacy Smith and Roy Henderson.
Serrato Corporation DBA North Texas Job Corps

POSTED

about 19 hours ago

DEADLINE

in 17 days
NAICS: 238220
New
WOJC - Replacement of Condensing Unit and Evaporator Coil – Walk-In Freezer
Solicitation # wojc-replacement-condensing-unit-evaporator-coil-walk-freezer
The Westover Job Corps Center, operated by ETR on behalf of the U.S. Department of Labor, is soliciting quotes for a subcontracting opportunity to decommission and replace a fire-damaged condensing unit and evaporator coil for a walk-in freezer in Chicopee, Massachusetts. The project requires the installation of new, energy-efficient equipment to restore freezing operations and must be performed by a Massachusetts-licensed electrician and a licensed refrigeration technician. All work must comply with the 2023 Massachusetts Electrical Code, the 780 CMR 13.00 Energy Code, and EPA regulations for refrigerant recovery. Bids are due by September 11, 2026, and a site walkthrough was scheduled for September 2, 2026. To be considered for the award, bidders must submit a completed bid sheet with a detailed cost breakdown, a proposed service schedule, and all required Massachusetts licensing and credentials. Necessary administrative documentation includes a W-9, Vendor Acknowledgement Form, certificates of liability insurance listing Center/ETR as the holder, and an active SAM.gov registration with a Unique Entity ID. Depending on the contract value, performance and payment bonds may be required for projects exceeding $35,000. Award selection is at the sole discretion of ETR and is not based solely on the lowest bid. Contractors must also adhere to prevailing wage laws, including the Davis-Bacon Act, and ETR's Affirmative Action Plan.
Westover Job Corps Center

POSTED

about 19 hours ago

DEADLINE

in 10 days
NAICS: 238220
New
AC Compressor Replacements for Gym, Academic and Kitchen Area
Solicitation # MI 2026-05
This subcontracting opportunity with the Miami Job Corps Center and Adams and Associates, Inc. involves the replacement of AC compressors at the Miami Job Corps Center in Florida. The scope of work specifically requires the replacement of two compressors for the gym (AHU-E3), one compressor for the academic area (AHU-B5), and one compressor for the kitchen (AHU-F2). Bidders must provide a single lump sum bid including all labor, materials, and equipment, with a detailed cost breakdown per unit. The award will be based on best value, evaluated through a weighted system consisting of price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). Eligible contractors must hold a valid Florida Contractor's License and maintain active registration in SAM.gov with a Unique Entity ID. Compliance with Davis-Bacon wage rates, OSHA, and EPA regulations is mandatory. Required documentation for submission includes a W9, vendor questionnaire, insurance certificates naming Adams and Associates, Inc. as an additional insured, and a 90-day bid guarantee. The project includes a one-year workmanship guarantee and a two-stage acceptance process involving substantial completion and final inspection. Payment terms are Net 30, and the Miami Job Corps Center is tax-exempt. Proposals are due by September 3, 2026.
Miami Job Corps Center

POSTED

about 19 hours ago

DEADLINE

in 2 days
NAICS: 238220
New
CBP5934 Bldg. 181 HVAC Compressor Replacement
Solicitation # CBP5934
Management and Training Corporation is seeking bids for a fixed-price, single lump sum subcontract to replace a failed compressor in the rooftop HVAC unit serving the west side of Building 181 (Cafeteria) at the San Diego Job Corps Center in Imperial Beach, California. The scope of work includes providing all labor, materials, and supervision for the replacement of the compressor and associated electrical and refrigeration components, as well as refrigerant recovery, leak testing, evacuation, recharge, and final commissioning. The project must be completed within 30 days of receiving a written Notice to Proceed, with an estimated price range up to 25,000 dollars. Bids are due by September 11, 2026, and will be evaluated based on overall best value. Qualified bidders must submit a signed bid form and a detailed cost breakout on company letterhead. The opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Awarded contractors must comply with Davis-Bacon Act prevailing wage determinations for San Diego County and OSHA safety standards. Key requirements include a one-year guarantee of workmanship, the provision of two sets of operation and maintenance manuals, and a minimum of two hours of on-site training for facility personnel. If the bid is 25,000 dollars or more, a 20 percent bid bond and subsequent performance and payment bonds from an A-rated surety are required. Final payment is contingent upon the submission of a Notice of Final Completion, certified payroll reports, and approved manufacturer warranties.
San Diego Job Corps Center

POSTED

about 19 hours ago

DEADLINE

in 10 days
NAICS: 238220
New
NJCC Building 32 Boiler Replacement in Vermont
Solicitation # njcc-building-32-boiler-replacement-vermont
Education and Training Resources is soliciting bids for a subcontracting opportunity to replace the existing oil-fired boiler system at the Northlands Job Corps Center Building 32 in Vergennes, Vermont. The project requires the demolition and disposal of the current system and the installation of a high-efficiency propane steam boiler, including a new gas burner, propane gas tank, duplex boiler feed tank, control panel, condensate tanks, and steam traps. The scope of work encompasses all necessary piping, insulation, venting modifications, and full system commissioning, including fuel/oxygen mix testing and boiler skimming. All work must strictly adhere to FEMP efficiency standards and various international and national codes, including IMC, IPC, IFGC, NEC, and NFPA Life Safety 101. Bidders must provide a detailed cost breakdown categorized by equipment, materials, and labor, along with a proposed service schedule and all required Vermont licensing and credentials. Submission requirements include a completed Bid Sheet, W-9 form, Certificate of Liability Insurance, and a Vendor Acknowledgement Form. The winning bidder must maintain an active registration in the System for Award Management with a Unique Entity ID. Evaluation is based on cost, qualifications, and compliance, though the lowest bid does not automatically guarantee an award. The contract incorporates several Federal Acquisition Regulation clauses, including the Davis Bacon Act and the Service Contract Act of 1965, and requires compliance with ETR's Affirmative Action Plan. Final project acceptance is contingent upon a signed punch list and the submission of all manufacturer and installation warranties.
Northlands Job Corps Center /ETR

POSTED

about 19 hours ago

DEADLINE

in 2 days

AI Contract Overview

Show more

The contract entails the installation of potable water, waste, vent, and gas piping systems across a facility located in the National Capital Region of Canada, performed under a subcontract by a vendor contracted by the National Research Council of Canada, a federal government agency. The work must comply with relevant building codes and safety standards for plumbing and piping systems, with all installations required to be fully integrated into the facility’s infrastructure. The scope covers the complete lifecycle of the piping networks, from rough-in through final connections and testing, ensuring all systems are operational, leak-free, and certified for use. The solicitation was posted on July 16, 2026, with a response deadline of July 31, 2026, at 7:00 PM local time. The North American Industry Classification System code 238220 applies, reflecting the focus on plumbing, heating, and air-conditioning contractor work. The place of performance is specifically tied to the National Capital Region, meaning subcontractors must be prepared to mobilize resources within this geographic area. There is no set-aside designation indicating this opportunity is reserved for specific categories of businesses, and no point of contact is listed in the public posting, requiring interested parties to review the full tender on the CanadaBuys portal for additional submission details and technical requirements.

General Info

Install potable water, waste, vent, and gas systems in National Capital Region per code, deadline July 31, 2026.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Canada, National Capital Region (NCR), CAN

Set-Aside

NONE

Documents

This scope was carved out of 26-58071.

The full solicitation package (12 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CNC Tool Room Lathe

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → National Research Council of Canada
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → National Research Council of Canada
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of potable water, waste, vent, and gas piping systems throughout the facility.

More opportunities from Government of Canada → National Research Council of Canada

Same awarding agency

NAICS: 333413
New
International
26-58018 Laboratory Wind Wall System, Amendment #7
Solicitation # 26-58018
The National Research Council of Canada's Aerospace Research Centre (NRC AERO) is soliciting a turnkey Laboratory Wind Wall System for its Drone and Flight Autonomy Laboratory in Mirabel, Quebec. The system is designed to support research on the performance, control, and safety of mid-size unmanned aircraft operating in complex aerodynamic environments, such as urban wind fields and ship airwakes. The requirement includes the design, fabrication, delivery, and commissioning of a vertically stacked fan array with a nominal jet face of 5m x 5m, positioned 3m above ground level. The system must provide controlled, repeatable airflow with specific performance metrics, including a maximum axial wind speed of 21-22 m/s, ramp-up acceleration of at least 10 m/s², and a non-dimensional swirl number of 0.5 or less at the test plane. The contract is a fixed-price arrangement with milestone-based payments, including 10% upon acceptance of the Preliminary Design Package and 20% upon acceptance of the Critical Design Package. The successful offeror must provide a minimum one-year warranty and ensure the system is compatible with North American industrial electrical standards and Canadian building codes. The NRC reserves an option to expand the system to 7m x 7m. Evaluation of proposals is based on a weighted formula consisting of Technical Merit (60%), Canadian Value-Added (25%), and Price (15%), with mandatory technical criteria and a minimum technical score of 50 points serving as pass/fail gates. All deliverables must be provided in both English and French, and final delivery is expected by March 31, 2028.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 30 days
View Details
NAICS: 334519
New
International
Fast Electronic Spectrum analyzer
Solicitation # 26-58101
The National Research Council Canada is soliciting proposals for the procurement of one new electronic spectrum analyzer to support the Ultrafast Quantum Photonics Laboratory. The instrument will be used to characterize radio-frequency spectra, noise, and modulation signals from laboratory photodetectors and electronic readout systems for experiments in quantum optics and high-speed optical measurements. Mandatory technical requirements include a frequency measurement range from 10 Hz to at least 7 GHz, a maximum analysis bandwidth of at least 40 MHz, a displayed average noise level of -165 dBm or lower at 1 GHz, and phase-noise performance of -109 dBc/Hz or lower at a 1 GHz carrier frequency. The system must also include suitable measurement software and support the detection of weak signals in the presence of larger signals. This solicitation is open exclusively to Canadian suppliers, with the contract award based on the lowest evaluated price among those who meet all mandatory technical criteria. All deliverables, including the hardware, user documentation, and a minimum one-year warranty, must be delivered DDP to Ottawa by March 1, 2027, with the overall contract term extending to March 1, 2028. Proposals must be submitted electronically by September 7, 2026, and must be divided into separate technical and financial volumes to avoid disqualification. Additionally, the contractor must comply with strict environmental packaging standards, anti-forced labour certifications, and electrical equipment certifications accredited by the Standards Council of Canada.
Other Measuring and Controlling Device Manufacturing

POSTED

5 days ago

DEADLINE

in 6 days
View Details
NAICS: 332313
New
International
26-58008 Fabrication of Heavy Impact Test Theater (HITT) Components, Question and Answer 4
Solicitation # 26-58008
The National Research Council of Canada's Ocean, Coastal and River Engineering Research Centre requires the fabrication and delivery of precision mechanical and structural components for the Heavy Impact Test Theater (HITT) to support full-scale ice impact testing. The scope of work involves the manufacturing of a modular Hammer Assembly consisting of sixteen steel cube modules, an Anvil Assembly featuring machined low-density polyethylene and aluminum elements, and a Free Sway System for guided movement. While the Surge Restraint System was initially listed, subsequent amendments clarified it is no longer required. All components must be fabricated according to specific NRC engineering drawings and delivered DAP to St. John's, Newfoundland and Labrador, with a final delivery deadline of March 31, 2027. The procurement process is governed by a weighted evaluation system where 70 percent of the score is based on technical merit and 30 percent on price. To be compliant, offerors must demonstrate experience with heavy structural fabrication of assemblies weighing at least 1000 kg, provide proof of adequate facility capacity, and maintain a recognized quality control process. The contract includes strict requirements for environmentally preferable packaging, security clearances for technical data, and adherence to the Federal Contractors Program for Employment Equity. Final award is based on the highest combined rating of technical merit and price, provided the offeror meets a minimum technical threshold of 60 points.
Plate Work Manufacturing

POSTED

6 days ago

DEADLINE

in 10 days
View Details