Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

Power Generation Equipment Emergency Maintenance

Active
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Emergency repair and maintenance services are required for military diesel generators, power distribution units, and backup power systems at Anniston Army Depot, with a focus on ensuring uninterrupted operational readiness of critical power infrastructure. The contract is classified as a subcontract under NAICS code 811310, which pertains to mechanical repair and maintenance, and is issued by the Department of Defense under W6QK Acc Anad. All work must be performed at the depot located in the 36201 zip code, where responders must be prepared to address urgent failures and perform preventative maintenance on mission-critical equipment. The solicitation opened on August 5, 2026, with a strict deadline for responses set for September 1, 2026, at 10:00 PM Eastern Time, requiring proposers to demonstrate capability, rapid response times, and compliance with military standards for power system reliability.

General Info

Emergency repair and maintenance for military power systems at Anniston Army Depot, deadline September 1, 2026.

Agency

Department Of Defense → W6QK Acc AnadView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

AL, 36201, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc Anad
ContactsNo contacts available
OfficeN/A
Organization / Agency
Department Of Defense → W6QK Acc Anad
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Emergency repair and maintenance of military diesel generators, power distribution units, and backup power systems at Anniston Army Depot.

Similar Contracts

Same NAICS industry code

NAICS: 811310
New
DIBBS
Unable to Decompose Subcontract OpportunitiesDue to a system outage causing a 504 gateway timeout, the prime contract details required to identify and structure subcontract or supplier opportunities could not be retrieved. As a result, no specific subcontract opportunities are currently available for decomposition or bidding, despite the solicitation being officially posted under the title "Unable to Decompose Subcontract Opportunities." The opportunity is classified as a subcontract with a Total Small Business Set-Aside under FAR 19.5, indicating that only small businesses are eligible to respond, though no NAICS code, organization type, or point of contact information is provided to guide potential bidders. The solicitation was issued by the Department of Defense under the agency name CONSTRUCTION & EQUIPMENT MRO SVC I, with the place of performance located in New Cumberland, Pennsylvania, zip code 17070-5002. The posting date is August 5, 2026, and responses are due by August 17, 2026. No office address, city, state, or country information is available for the contracting office, and no direct point of contact is listed. Interested parties can access the solicitation details via the provided DIBBS link, but without prime contract context, the scope, requirements, or deliverables remain undefined.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 12 hours ago

DEADLINE

in 11 days
View Details
NAICS: 811310
New
SLED
Hydraulic/Pneumatic Hose Repair
Solicitation # Y26-195
Orange County, Florida, is seeking qualified contractors to provide hydraulic and pneumatic hose repair services under solicitation Y26-195, which outlines a five-year term contract with indefinite delivery and indefinite quantity features. The scope includes on-site and off-site manufacturing, repair, and supply of hydraulic and pneumatic hose assemblies rated up to 6000 PSI and 1.5-inch diameter, along with mandated hose protectors, with a 24-hour mobile service requirement across the county and a two-hour response time to service calls. Repairs must begin within six hours of part receipt, with standard parts delivered within two business days and emergency “hot shot” deliveries allowed within two hours. The contract includes estimated budgets for labor, service calls, shop supplies capped at 3% of labor cost or $50 per invoice, freight up to $2,500 for Lot A, and parts/materials with a total budget of $1,300,000 for Lot A and $125,000 for Lot B, subject to contractor-proposed mark-up or mark-down percentages. Award will follow a Lowest Price Technically Acceptable methodology, where technical acceptability is a pass/fail criterion and price is the determining factor among qualified respondents. Proposals must be submitted electronically through the OpenGov e-Procurement Portal by September 8, 2026, at 4:00 PM, with non-compliant formats or submission methods resulting in rejection. Offerors are required to submit multiple compliance documents, including a Conflict of Interest Statement, Statement of Felony Convictions, and Statement of Litigation, with affirmative responses triggering mandatory attachments. Additional mandatory certifications include E-Verify enrollment for all new hires, an Anti-Human Trafficking Affidavit, and certification that the contractor is not designated as a terrorist organization under Florida law. Pricing for parts and materials may be adjusted annually based on the CPI-U, with a 4% maximum increase per renewal and a requirement to pass on any decreases, with failure to do so potentially triggering termination and debarment. The contract includes emergency priority provisions requiring the contractor to prioritize Orange County over private entities during public emergencies, and allows other government agencies to use the contract independently. Performance is governed by strict timelines with time being of the essence, and contractors must maintain all necessary professional licenses, comply with county-specific clauses regarding insurance, background screening, drug testing, confidentiality, data security, audit rights, and record retention, while accepting inspection
Administrative Svcs., Procurement Division

POSTED

about 16 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 811310
New
Federal
Conventional Machine Tool Repair ServicesThe contract seeks qualified vendors to provide emergency repair and maintenance services for conventional, non-CNC machine tools including lathes, milling machines, grinders, and drill presses utilized in depot operations. These services are critical to maintaining operational readiness and must be performed promptly to minimize downtime of essential equipment. The work is to be carried out at a location with zip code 36201, and the contractor is expected to respond swiftly to urgent service requests, ensuring tools are restored to full functionality with minimal disruption to military logistics and production cycles. This subcontract opportunity, classified under NAICS code 811310 for machine shop, tool die, and mold making services, is issued by the Department of Defense under the agency name W6QK Acc Anad. The solicitation was posted on August 5, 2026, and responses are due by September 1, 2026, at 10:00 PM Eastern Time. Bidders must have demonstrated expertise in servicing industrial-grade mechanical equipment and be prepared to meet strict performance timelines. While no specific set-aside status is indicated, the work is exclusively designated as a subcontract and requires proven capability in field-based, high-priority maintenance operations within a military support environment.
W6QK Acc Anad

POSTED

about 17 hours ago

DEADLINE

in 27 days
View Details
NAICS: 811310
New
Federal
CNC Machine Tool Emergency Repair ServicesThe contract requires on-call emergency repair and maintenance services for CNC machine tools at the Anniston Army Depot, with a focus on urgent diagnostics, component replacement, and precise calibration to meet original equipment manufacturer standards. Services must be available to respond immediately to critical equipment failures to minimize operational downtime and ensure mission readiness. All work must adhere strictly to OEM specifications, and technicians are expected to possess the expertise to handle complex machinery failures under high-pressure conditions. The contract is classified as a subcontract under NAICS code 811310, with a proposed response deadline of September 1, 2026, and a posting date of August 5, 2026. Performance is required at the Anniston Army Depot in zip code 36201, with no specific set-aside designation indicated. The contracting agency is the Department of Defense, specifically under the W6QK Acc Anad organization, and all activities must align with federal defense procurement protocols, though further details regarding point of contact or location are not provided.
W6QK Acc Anad

POSTED

about 17 hours ago

DEADLINE

in 27 days
View Details
NAICS: 811310
New
Federal
48--RUPTURE DISK ASSY, IN REPAIR/MODIFICATION OF
Solicitation # N0010426QYAEW
The contract pertains to the procurement of five rupture disk assemblies, identified by NSN 7H-4820-016756159 and NV822184-5, to be delivered to DLA Distribution Norfolk, Virginia. The Government has determined that it cannot procure this item from alternate sources due to proprietary data restrictions and has deemed it uneconomical to acquire the necessary design rights or to reverse engineer the component. This procurement is being conducted under FAR 6.302-1 as a sole-source action, with no expectation of competition unless responses to this notice demonstrate capability and qualification that justify opening the acquisition to multiple offerors. All responsible parties may submit proposals or capability statements within 45 days of the notice publication, or 30 days if awarded under an existing Basic Ordering Agreement. The Government retains full discretion to decide whether to proceed with non-competitive award based on submitted information, and any award will be contingent on the offeror, product, or manufacturer meeting all applicable qualification requirements at the time of award. The solicitation number is N0010426QYAEW, posted on August 5, 2026, with a response deadline of September 21, 2026, and is classified as a Small Business Set Aside with total set-aside intent. The contracting office is the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, with Dianne Wydra listed as the primary point of contact for technical and procedural inquiries. Technical documentation such as specifications, qualified product lists, and military handbooks may be accessed via the ASSIST-Online portal or through DODSSP, though proprietary drawings, patterns, and deviation lists are not available through these channels. Individuals without internet access may request documents via phone or mail to the DODSSP in Philadelphia. This action is strictly for supply procurement and does not involve service provision or data acquisition rights from the original manufacturer.
Navsup Weapon Systems Support Mech

POSTED

about 17 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811310
New
Federal
15--WING ASSEMBLY,AIRCR- AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF
Solicitation # N0038326RTC15
The U.S. Navy’s Naval Supply Systems Command Weapon Systems Support (NAVSUP WSS) in Philadelphia intends to award a sole-source contract for the repair of two flight-critical wing assembly parts: NSN 1560-016002718 with part number 74A140001-1035 and NSN 1560-016002719 with part number 74A140001-1036, with a total quantity of ten units each. Delivery will be FOB origin, and the work requires engineering source approval due to the specialized design, proprietary technical data, and unique manufacturing or repair knowledge held exclusively by previously approved sources. The Government has determined that no other source possesses the necessary data or capability to maintain part quality, and the time required to qualify an alternate source would delay delivery beyond operational needs. Only previously approved sources have been solicited, and any new offeror must submit comprehensive source approval documentation in accordance with NAVSUP WSS brochures, including evidence of experience with similar items or proof of pending approval. Proposals lacking complete documentation or verification of prior submission will be disqualified. The solicitation number is N0038326RTC15, with a response deadline of September 21, 2026, and the point of contact is Christina M. Foley. While this is a presolicitation notice not intended for competitive bids, all responsible sources may submit capability statements within 45 days, and the Government retains full discretion on whether to proceed with sole-source award. The contract is subject to applicable trade agreements including the Buy American Act and the World Trade Organization Government Procurement Agreement.
Navsup Weapon Systems Support

POSTED

about 17 hours ago

DEADLINE

in about 2 months
View Details
NAICS: 811310
New
Federal
Self-Contained Breathing Apparatus & Accessories Maintenance and Repair
Solicitation # 36C24426Q0748
This contract is a Firm Fixed Price agreement for preventive and corrective maintenance services on government-owned Fire and Emergency Services Self-Contained Breathing Apparatus and atmospheric gas monitoring equipment located at the Coatesville VA Medical Center in Building 12, Pennsylvania. The work must comply with all applicable Department of Veterans Affairs standards, as well as requirements from the National Institute for Occupational Safety and Health and the National Fire Protection Association to ensure operational readiness and safety. The contract is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, as defined under FAR 19.14, and is classified under NAICS code 811310 for repair and maintenance services. The solicitation was posted on August 5, 2026, with responses due by August 18, 2026, and is being managed by the Department of Veterans Affairs through the 244-NETWORK Contract Office 4 in Pittsburgh, Pennsylvania. Performance will occur at the specified Coatesville location, with primary point of contact Chris Clements and secondary contact Ed Ferkel available for inquiries.
244-NETWORK Contract Office 4 (36C244)

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 811310
New
Federal
AC Motor Repair
Solicitation # N3904026Q5786
The Portsmouth Naval Shipyard Detachment at Naval Base Point Loma in San Diego, California is seeking qualified vendors to repair an AC motor, requiring access to specific NAVSEA technical drawings and the Government’s Property Management System to properly account for Government Furnished Property. Vendors must be located within a reasonable driving distance of the installation to facilitate timely and efficient service delivery. The solicitation, identified as N3904026Q5786, was posted on August 5, 2026, with responses due by August 6, 2026, and no set-aside restrictions apply. The effort falls under NAICS code 811310 for industrial and commercial machinery and equipment repair. Interested parties must submit a completed Request for Quote with all required documentation to the designated contact at the Portsmouth Naval Shipyard, which is administratively managing the procurement despite the work being performed in California. Primary point of contact for inquiries and submissions is Alyssa Scarelli, reachable by phone at 207-994-0740 or email at alyssa.a.scarelli.civ@us.navy.mil. The physical office listed for the contracting activity is in Portsmouth, New Hampshire, but the performance location is strictly at the San Diego facility. All submissions must be directed to the recipient specified in the Request for Quote, and vendors are directed to review the attached documentation for detailed technical and procedural requirements. Participation requires full compliance with government property handling protocols and the ability to execute repairs using authorized technical specifications.
Portsmouth Naval Shipyard Gf

POSTED

about 17 hours ago

DEADLINE

in about 16 hours
View Details
NAICS: 811310
New
Federal
Brand Name OEM "ProofCert, LLC" - Installation, Calibration, and Operational Testing of Pull Test Machine
Solicitation # N0040626Q0461
Fleet Logistics Center Puget Sound is seeking a firm fixed-price supply-type procurement for the installation, calibration, and operational testing of a pull test machine under the brand name OEM ProofCert, LLC, to support the SRF-JRMC program. This solicitation is a Small Business Set Aside, total, with the NAICS code 811310, and is exclusively open to small businesses. Interested parties must submit quotes by the deadline of August 10, 2026, and are responsible for downloading and regularly checking the solicitation site for any amendments, as the government assumes no liability for access failures. Evaluation will consider technical capability including delivery date, price, and past performance, with no single factor prioritized over the others, and the most advantageous offer will be selected per RFO 12.203. The anticipated award date is August 2026, and the contracting officer is Walid Aslan, located at the office in Bremerton, Washington. All correspondence and submissions must be directed through officially listed points of contact.
Navsup Flt Logistics Ctr Puget Sound

POSTED

about 17 hours ago

DEADLINE

in 5 days
View Details
NAICS: 811310
New
Federal
Area of Interest - Emergency Maintenance Equipment Support (CSO-W911KF25SC002)
Solicitation # W911KF25SC002-A011
The contractor is obligated to provide on-call emergency repair services to address equipment failures and restore all affected systems to their original operational status, bearing full responsibility for all resources required to fulfill this mission. This support is critical to maintaining readiness and ensuring timely recovery of essential equipment under unforeseen breakdown conditions. The solicitation, titled Area of Interest - Emergency Maintenance Equipment Support with number W911KF25SC002-A011, was posted on August 5, 2026, and requires responses no later than September 1, 2026. It falls under NAICS code 811310, indicating a focus on electronic and precision equipment repair and maintenance. The contract is managed by the Department of Defense through the Office of W6QK Acc Anad, located in Anniston, Alabama, with primary point of contact Crystal Hodges and secondary contact Heather Robinson. There is no set-aside designation, meaning the opportunity is open to all eligible businesses, and performance is expected to occur in Anniston, Alabama.
W6QK Acc Anad

POSTED

about 17 hours ago

DEADLINE

in 27 days
View Details
NAICS: 811310
New
SLED
Emergency and Routine Scale Repair ServicesThe contract requires qualified technicians to perform both emergency and routine maintenance on industrial weight scales located at Alachua County’s transfer station and materials recovery facility operations. Response times for emergency repairs are strictly enforced to ensure minimal disruption to waste processing and material handling operations, with immediate attention mandated for scale outages that impact daily workflows. Technicians must be experienced in diagnosing and repairing industrial weighing systems, including load cells, indicators, and associated electronics, and must adhere to all safety and operational protocols at the facilities. The work is classified under NAICS code 811310, indicating it falls under industrial machinery and equipment repair and maintenance services, and is structured as a subcontract under the Solid Waste & Resource Recovery division of Florida. All proposals must be submitted by the deadline of August 26, 2026, with no solicitation number assigned but public access available via the provided UI link. While specific geographic details such as city or zip code are not provided in the data, the performance location is explicitly tied to Alachua County’s solid waste infrastructure. The contract emphasizes reliability and rapid turnaround, making response speed and technical proficiency critical selection criteria. There is no specified set-aside designation, meaning the opportunity is open to all eligible subcontractors regardless of business size or ownership status.
Solid Waste & Resource Recovery

POSTED

about 19 hours ago

DEADLINE

in 21 days
View Details
NAICS: 811310
New
SLED
Annual Scale Maintenance for Alachua County
Solicitation # 27-251-MM
Alachua County, located in North Central Florida with its government seat in Gainesville, is seeking annual scale maintenance services under solicitation number 27-251-MM, posted on August 5, 2026, with responses due by August 26, 2026. The county, which has a population exceeding 250,000 and spans 969 square miles, operates under a County Manager Charter form of government led by a five-member Board of County Commissioners, supported by five elected constitutional officers and the County Attorney. The solicitation is managed by the Solid Waste & Resource Recovery department and is categorized under SLED government procurement. Services will be performed within the county, primarily centered in Gainesville, where the administrative office is located at 32601. Allen Betz, Transfer Station Manager, is the primary point of contact for technical inquiries, while Mandy Mullins, Procurement Agent I, handles procurement-related matters. The contract will ensure the proper functioning and calibration of scales critical to solid waste operations across the county.
Solid Waste & Resource Recovery

POSTED

about 19 hours ago

DEADLINE

in 21 days
View Details

More opportunities from Department Of Defense → W6QK Acc Anad

Same awarding agency

NAICS: 423830
New
Federal
Spare Parts and Component Supply for Industrial EquipmentThe contract calls for the supply of OEM or equivalent spare parts and components essential for the maintenance and emergency repair of CNC machines, TMDE, and power generation systems at a designated depot facility located in the 36201 zip code area. The procurement is structured as a subcontract under the NAICS code 423830, indicating it falls within the wholesale trade of machinery and equipment, and is managed by the Department of Defense through the agency W6QK Acc Anad. All parts must meet or exceed original equipment specifications to ensure operational readiness and compatibility with existing systems during urgent field repairs. The solicitation was posted on August 5, 2026, with responses due by September 1, 2026, at 10:00 p.m., providing a limited window for qualified suppliers to submit proposals. Delivery timelines will be tightly coordinated with deployment schedules to support mission-critical downtime reduction and continuous system functionality.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 17 hours ago

DEADLINE

in 27 days
View Details
NAICS: 811212
New
Federal
Test, Measurement, and Diagnostic Equipment (TMDE) RepairThis contract involves on-site emergency repair and calibration of precision military test, measurement, and diagnostic equipment including multimeters, oscilloscopes, and specialized test sets. The work must be performed at the designated location with a zip code of 36201, ensuring rapid response to critical military instrumentation failures to maintain operational readiness. The contract is structured as a subcontract under the NAICS code 811212, indicating it is focused on electronic and precision instrument repair and maintenance services. The solicitation was posted on August 5, 2026, with a hard deadline for responses on September 1, 2026, at 10:00 PM Eastern Time. The contracting activity falls under the Department of Defense, specifically identified as W6QK Acc Anad, and the performance location is fixed at 36201, requiring vendors to be capable of mobilizing technical personnel and specialized tools on short notice to deliver emergency support in a military context.
Computer and Office Machine Repair and Maintenance

POSTED

about 17 hours ago

DEADLINE

in 27 days
View Details
NAICS: 334516
New
Federal
SPECTOMETERS, LAB ENVIRONMENT AND MOBILE
Solicitation # W911KF26QA048
The contract solicitation seeks the procurement of four optical emission spectrometers and associated ancillary equipment, consisting of two benchtop units and two portable units, each pair to be installed and fully operational in their respective environments. The equipment is intended for use in both laboratory and mobile settings, supporting precise material analysis capabilities critical to defense and industrial applications. The solicitation, identified by number W911KF26QA048, falls under NAICS code 334516 and is managed by the Department of Defense through the office of W6QK Acc Anad located in Anniston, Alabama. All responses must be submitted by September 8, 2026, with the primary point of contact being Sara Young, reachable via email and phone for inquiries. The place of performance is listed with a zip code of 36201, indicating the primary delivery and installation location will be in Anniston, AL.
Analytical Laboratory Instrument Manufacturing

POSTED

7 days ago

DEADLINE

in about 1 month
View Details
NAICS: 333923
Federal
Low Level Cranes
Solicitation # W911KF26QA046
The solicitation for Low Level Cranes under W911KF26QA046 is issued by the Department of Defense through the Office of W6QK Acc Anad located in Anniston, Alabama. The opportunity is open for response until August 31, 2026, with the NAICS code 333923 indicating it relates to other construction machinery and equipment manufacturing. The primary point of contact is Zena Johnson, reachable at 5206696059 or zena.s.johnson.civ@army.mil, with Heather P. Robinson as the secondary contact at 5715880969 or heather.p.robinson.civ@army.mil. No specific place of performance has been designated, and there is no set-aside type assigned to this solicitation, meaning it is open to all eligible contractors without preferential treatment based on business size or demographic criteria. Interested parties can access further details through the provided SAM.gov link.
Overhead Traveling Crane, Hoist, and Monorail System Manufacturing

POSTED

8 days ago

DEADLINE

in 25 days
View Details
NAICS: 333517
Federal
Computer Numerical Control (CNC) Horizontal Machining Center (HMC)
Solicitation # W911KF26QA047
The U.S. Department of Defense, through the Office of W6QK Acc Anad located in Anniston, Alabama, is soliciting bids for the procurement and installation of one Computer Numerical Control (CNC) Horizontal Machining Center (HMC) along with all necessary ancillary equipment, as defined in the Statement of Work. This requirement is solicited under number W911KF26QA047, classified under NAICS code 333517, and is open to eligible contractors with a response deadline of August 18, 2026, at 4:00 PM Eastern Time. The equipment must be delivered and installed to meet detailed technical and operational specifications outlined in the solicitation, though the exact place of performance has not been specified. Primary point of contact for inquiries is Heather Robinson, reachable via email at heather.p.robinson.civ@army.mil or by phone at 571-588-0969. The solicitation is published on SAM.gov with no set-aside designation, meaning it is open to all qualified small and large businesses.
Machine Tool Manufacturing

POSTED

9 days ago

DEADLINE

in 12 days
View Details
NAICS: 541330
Federal
Area of Interest (AoI) – Lifecycle Sustainment, Advanced Engineering, and Multi-Class Parts Sourcing Support Services (CSO-W911KF25SC002)
Solicitation # W911KF-25-S-C002-A010
This contract announcement establishes an Area of Interest under the ACC-ANAD Organic Industrial Base Modernization Commercial Solutions Opening, soliciting solutions for comprehensive sustainment of legacy defense systems including ground combat vehicles, locomotives, and artillery. The requirement is structured around three core capability areas: Technical, Engineering, and Depot Sustainment Services; Advanced Manufacturing, Reverse Engineering, and Digital Twin Integration; and Multi-Class Parts Sourcing and DMSMS Mitigation. Offerors may respond to one, two, or all three areas, with submissions due no later than 5:00 PM CDT on August 10, 2026, and evaluated using a sustainment-first hierarchy that prioritizes Integrated Sustainment and Lifecycle Support Strategy, DMSMS Mitigation and Parts-Sourcing Agility, Reverse Engineering and Advanced Manufacturing Maturity, and Specialized Mobile Heavy Equipment and Locomotive Capabilities. Proposals are assessed as either Acceptable or Unacceptable on technical merit and Fair and Reasonable or Not Fair and Reasonable on price, with award based on Best Value trade-off as defined by the FY26 NDAA, not Lowest Price Technically Acceptable. All submissions must be electronically delivered via the designated CSO portal in compliance with specified format rules—five single-sided pages or fifteen slides for the initial solution brief—and must not be marked confidential, though proprietary data must be clearly identified and is protected under FOIA for five years. Performance is centered at Anniston Army Depot, Alabama, with delivery timelines requiring rapid response to spare parts needs, including Class 4 and Class 9 components sourced outside traditional federal supply chains within three calendar days. Contractors must adhere to AS9100 quality standards, implement Configuration Management procedures, and produce non-proprietary Level 3 Technical Data Packages through reverse engineering and advanced manufacturing techniques such as 3D printing. Packaging, preservation, and marking must align with defense quality systems, though specific MIL-STDs for these functions are not prescribed. Payment processing is exclusively through the Payment Invoicing and Evaluation Engine (PIEE), and all offerors must maintain a current Unique Entity ID and active SAM.gov registration, with no small business or socioeconomic certifications required at this pre-award phase. The contract vehicle supports task orders with a general twelve-month performance period and is governed under FAR Part 12 Commercial Item Procedures using a fixed-price structure; contractors must obtain necessary security clearances if foreign-owned, and no work may commence without a formal written directive from the Contracting Officer. Point
Engineering Services

POSTED

9 days ago

DEADLINE

in 17 days
View Details
NAICS: 541330
Federal
Configuration Management & Quality Assurance ServicesThe contract requires the provision of Configuration Management and quality assurance services to maintain technical data integrity, ensure complete part traceability, and uphold compliance with AS9100 and MIL-STD-31000 standards throughout sustainment operations. These services are critical to supporting the Department of Defense’s ongoing maintenance and logistics efforts, with performance centered in the 36201 zip code area. The work is structured as a subcontract under NAICS code 541330, targeting specialized engineering and technical consulting services aligned with defense aviation and systems sustainment requirements. All activities must demonstrate rigorous adherence to industry-standard quality protocols to prevent discrepancies, ensure consistency in documentation, and support audit readiness across the product lifecycle. Bids are due by August 10, 2026, at 10:00 PM, following a solicitation posted on July 22, 2026. There is no set-aside classification specified, and while the specific contracting office address details are not provided, the agency responsible is W6QK Acc Anad under the Department of Defense. The contract does not designate a point of contact publicly, and full details can be accessed through the official SAM.gov portal. Successful bidders will be expected to deliver consistent, auditable CM processes that safeguard technical accuracy, enable efficient parts replacement and repair, and uphold strict defense quality regulations without deviation.
Engineering Services

POSTED

15 days ago

DEADLINE

in 5 days
View Details
NAICS: 811310
Federal
Depot-Level Overhaul & Recapitalization ServicesThe contract requires performance of depot-level overhaul, testing, inspection, and sustainment services for legacy ground combat vehicles, artillery systems, and Department of Defense locomotives, with work to be conducted primarily at Anniston Army Depot in Alabama, zip code 36201, or at remote temporary duty locations as needed. The scope encompasses comprehensive recapitalization efforts to restore and maintain operational readiness of aging military equipment critical to land-based combat and logistics operations. All work must meet stringent DoD technical and quality standards to ensure safety, reliability, and extended service life of the systems involved. The solicitation is structured as a subcontract under the North American Industry Classification System code 811310, which pertains to repair and maintenance of industrial and commercial machinery and equipment. The opportunity was posted on July 22, 2026, with a firm deadline for response set for August 10, 2026, at 10:00 PM Eastern Time. The awarding agency is the Department of Defense, specifically under the office identifier W6QK Acc Anad, indicating procurement activity managed through the Army’s logistics and sustainment command structure. The contract is likely intended to support the continued operational deployment of legacy platforms as modernization programs are phased in.
Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

15 days ago

DEADLINE

in 5 days
View Details
NAICS: 423830
Federal
Agile Sourcing of Class 4 & Class 9 Obsolete ComponentsThe contract calls for the rapid sourcing, testing, packaging, and delivery of obsolete Class 4 electronics and Class 9 components impacted by Diminishing Manufacturing Sources and Material Shortages, with all deliveries required to be completed within three calendar days of request. This subcontract is focused exclusively on addressing urgent supply chain gaps for critical defense-related components, ensuring operational continuity for systems relying on aging or discontinued parts. Failure to meet the three-day delivery window may result in non-compliance, and the work must be performed at the specified location with a zip code of 36201. The solicitation was posted on July 22, 2026, with responses due by August 10, 2026, and falls under NAICS code 423830, which covers wholesale trade of electronic parts and equipment. The contracting agency is the Department of Defense through its office W6QK Acc Anad, indicating this effort supports military systems and readiness. While no set-aside designation is provided, the nature of the work demands a highly responsive supplier with existing infrastructure for sourcing hard-to-find electronic components, rigorous testing protocols, and secure packaging capabilities to meet defense standards.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

15 days ago

DEADLINE

in 5 days
View Details