Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, December 9 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Precision Machining for Pump and Motor Components

Open

State & Local

Response Deadline01/07/2027, 03:00:00 PM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract opportunity, titled Precision Machining for Pump and Motor Components, involves the fabrication of custom or replacement machined parts used for the repair and rebuild of electric motors and pumps. The selected provider will utilize CNC milling, turning, or grinding equipment to ensure all components meet original equipment manufacturer specifications. These parts are to be delivered either to the designated repair facility or directly to the Inland Empire Utilities Agency. Managed by the Contracts and Procurement Department of the Inland Empire Utilities Agency in California, the contract falls under NAICS code 332710. Interested parties must submit their responses by January 7, 2027. It is important to note that any contractor performing work on-site is required to maintain valid registration with the Department of Industrial Relations.

General Info

Precision machining of pump and motor components for Inland Empire Utilities Agency by 2027.

Agency

California → Contracts & Procurement Department of Inland Empire Utilities Agency

NAICS

332710 - Machine Shops

Place of Performance

CA, USA

Set-Aside

NONE

Documents

This scope was carved out of RFP-VC-26-012.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Electric Motor Pump and Mixer Repairs and Rebuilds

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 10

subcontract

Response DeadlineJan 7

Submission deadline

Response Deadline

01/07/2027, 03:00:00 PM PSTin about 2 months

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyCalifornia → Contracts & Procurement Department of Inland Empire Utilities Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyCalifornia → Contracts & Procurement Department of Inland Empire Utilities Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies machined parts for the repair and rebuild of electric motors and pumps for prime contractors on Inland Empire Utilities Agency (IEUA) projects. Fabricates custom or replacement components to meet OEM specifications using CNC milling, turning, or grinding equipment. Requires DIR registration if performing work on-site. Delivers machined components to the repair facility or agency.

Similar Contracts

Same NAICS industry code

Manufacture and Supply of Bearing and Oil Seal Retainers

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

Supply of Cargo Hook Latches

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Precision Machining and Finishing of Cocking PiecesThis subcontract for the DLA Weapons Support Land Supply Chain involves the precision machining and surface finishing of cocking pieces. The selected provider will be responsible for machining cast components using CNC mills and grinders in strict accordance with TDP Rev B Gen 2 and Drawing NR 19200 13058658. A critical component of the scope is the execution of First Article Testing for critical gun parts to ensure all delivered items are fully inspected and approved. To qualify for this project, contractors must maintain ITAR and EAR registrations, hold JCP certification, and meet CMMC Level 2 security standards. The work is categorized under NAICS code 332710 and will be performed in New Cumberland. Interested parties must submit their responses by November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Supply of Shaft Assembly, Shouldered (NSN 3040015425340)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 3 hours ago

DEADLINE

Manufacture of Sleeve Bushings (NSN 3120-00-728-1218)This subcontract involves the manufacture of 28 sleeve bushings under NSN 3120-00-728-1218 for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires precision machining to meet specific technical standards, with a strict prohibition on the use of additive manufacturing. All finished bushings must be inspected at the origin prior to delivery. To be eligible, contractors must maintain ISO 9001:2015 or SAE AS9100 quality systems and hold JCP certification to ensure authorized access to ITAR and EAR data. Additionally, the provider must demonstrate CMMC Level 2 compliance. The solicitation was posted on November 12, 2026, with a response deadline of November 20, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Precision Machining and Fabrication of Aviation Rod End Connectors

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Threaded Pin-Rivets (Source-Controlled)

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

Manufacture of Cylinder Compression Tester Adapters

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

Swaging Tool Hardware Kit Manufacturing/SupplyThis subcontract involves the manufacture and supply of six hardware kits for swaging tools to support prime contractors on DLA Weapons Support projects. The contractor is responsible for assembling the kits according to NSN 5331-01-543-1965, ensuring all packaging meets MIL-STD-2073-1 Appendix D and marking adheres to MIL-STD-129. Quality control must be maintained via the DLA Master List, and all deliverables must comply with the Buy American Act. Managed by the Department of Defense under the DLA Weapons Support LSO Combat Vehicles and Armament, this opportunity is designated as a Total Small Business Set-Aside under NAICS code 332710. The solicitation was posted on November 12, 2026, with a response deadline of November 27, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 3 hours ago

DEADLINE

Brake Disc Manufacturing

DLA WEAPONS SUPPORT STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 3 hours ago

DEADLINE

Manufacturing of Linear Actuating Cylinder PistonsThis subcontract involves the manufacture of 391 linear actuating cylinder pistons for prime contractors supporting the Department of Defense DLA Weapons Support Land Supplier Operations. Production must strictly adhere to Basic Drawing NR 19207 12344830 Revision D and TDP Rev B Gen 2. The contract mandates the use of traditional subtractive or formative manufacturing processes, explicitly prohibiting the use of additive manufacturing. Eligible bidders must be Women-Owned Small Businesses and maintain ISO 9001:2015, JCP certification, and CMMC Level 2 compliance. All completed units must be delivered in full compliance with DLA technical data. The place of performance is located in Anniston, Alabama, with a response deadline of November 23, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

Precision Machining and Finishing of Steering Bell Cranks

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 3 hours ago

DEADLINE

More opportunities from California → Contracts & Procurement Department of Inland Empire Utilities Agency

Same awarding agency

Specialized Equipment Transport and DeliveryThe Specialized Equipment Transport and Delivery subcontract involves the pick-up and delivery of heavy industrial equipment, specifically electric motors, pumps, and mixers, for prime contractors working on Inland Empire Utilities Agency projects. The selected provider will be responsible for transporting this equipment between agency sites and off-site repair facilities utilizing flatbed trucks and cranes or hoists for loading and unloading. To ensure operational safety and efficiency, the contractor must employ drivers with Commercial Driver's Licenses and maintain the capability to deliver equipment within a 24-hour emergency response window. This opportunity is managed by the Contracts and Procurement Department of the Inland Empire Utilities Agency in California, with a response deadline set for January 7, 2027.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

in about 2 months

OEM Parts Supplier (Pumps, Motors, Mixers)This subcontract opportunity is issued by the Contracts and Procurement Department of the Inland Empire Utilities Agency in California for the supply of Original Equipment Manufacturer replacement parts. The selected supplier will be responsible for sourcing and delivering genuine OEM-certified components, such as windings, impellers, bearings, and seals, for pumps, submersible mixers, and electric motors. These parts are to be delivered directly to either the prime contractor or the designated IEUA facility. To be eligible for this contract, the supplier must maintain status as an authorized distributor or supplier of OEM parts. The solicitation was posted on November 10, 2026, and the deadline for responses is January 7, 2027. This procurement falls under NAICS code 423830, focusing on the specialized distribution of industrial equipment components.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

in about 2 months

Electric Motor, Submersible Pump, and Mixer Repair ServicesThis subcontract opportunity involves providing specialized mechanical repair and rebuild services for electric motors, submersible mixers, and submersible pumps to support prime contractors on Inland Empire Utilities Agency projects. The scope of work includes off-site repairs, diagnostic testing, and failure analysis to determine and implement necessary corrective actions. Upon completion, the contractor must deliver the repaired equipment along with a comprehensive report detailing the as-found conditions and supporting photographs. To be eligible, contractors must possess a valid California Contractor’s License and maintain registration with the Department of Industrial Relations for public works. This solicitation, managed by the Contracts and Procurement Department of the Inland Empire Utilities Agency, has a response deadline of January 7, 2027.

Electronic and Precision Equipment Repair and Maintenance

POSTED

DEADLINE

in about 2 months

Electric Motor Pump and Mixer Repairs and Rebuilds

Solicitation # RFP-VC-26-012

The Inland Empire Utilities Agency (IEUA) is soliciting proposals under RFP-VC-26-012 for mechanical repair and rebuild services for electric motors, submersible mixers, and submersible pumps. These services are to be provided on an as-needed basis over an initial three-year contract term, with a requirement for emergency response within 24 hours of notice. The scope includes off-site repairs, machining of parts, and pick-up and delivery at designated locations. All repairs must utilize OEM parts unless otherwise approved, and the vendor must provide a one-year warranty on both parts and labor. Each repair must be accompanied by a completion report detailing as-found conditions, corrective actions, and supporting photographs. The agency intends to award contracts to multiple qualified firms based on the best overall value, evaluating proposers on company experience, technical capabilities, service delivery, quality assurance, and cost. Potential awardees may be subject to facility site visits to validate their capabilities. Proposals must be submitted electronically via the PlanetBids portal by January 7, 2027, and must include a firm-fixed fee schedule, a non-collusion affidavit, and a Public Works Contractor Registration Certification. Payment is handled electronically via ACH, with an option for expedited payment in exchange for a discount. Contractors must adhere to all Labor Code provisions and provide certificates of insurance and original endorsements before commencing work.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 2 months

Steel Fabrication & SupplyThis subcontract for Steel Fabrication and Supply involves the manufacture and delivery of welded steel racking components for prime contractors working on Inland Empire Utilities Agency facility projects. The scope of work includes the production of rack frames, beams, and base plates based on approved engineered drawings, as well as the application of required industrial finishes to ensure all components are code-compliant upon delivery to the project site. Managed by the Contracts and Procurement Department of the Inland Empire Utilities Agency in California, the opportunity is categorized under NAICS code 332312. The solicitation was posted on October 29, 2026, with a response deadline set for December 17, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

in about 1 month

Civil Site Work & Surface RestorationThis subcontract for Civil Site Work and Surface Restoration involves providing excavation, trenching, and restoration services for prime contractors working on Inland Empire Utilities Agency facility projects. The scope of work specifically includes trenching for fire service piping and the subsequent restoration of disturbed areas through landscaping, concrete pouring, and asphalt paving to ensure sites are returned to their pre-construction condition. All project activities must strictly adhere to the 2024 GreenBook (SSPWC) standards. The opportunity is managed by the Contracts and Procurement Department of the Inland Empire Utilities Agency in California, with a response deadline set for December 17, 2026.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

in about 1 month

Seismically Engineered Pallet Racking SystemThis subcontract involves the design, supply, and installation of a seismically engineered welded steel pallet racking system for prime contractors working on Inland Empire Utilities Agency facility projects. The scope of work includes performing GPR slab scanning, developing layout drawings for over 250 positions, and the installation of frames, beams, and seismic anchors to ensure a fully labeled and compliant system. To qualify for this project, contractors must hold a Class A or B license and provide a stamp from a California-licensed structural engineer. The solicitation was posted on October 29, 2026, with a response deadline of December 17, 2026. The project falls under NAICS code 238990 and is managed by the Contracts and Procurement Department of the Inland Empire Utilities Agency in California.

All Other Specialty Trade Contractors

POSTED

DEADLINE

in about 1 month

Fire Protection System Design & InstallationThis subcontract opportunity involves the design, permitting, and installation of a complete automatic fire sprinkler system for facility projects managed by the Inland Empire Utilities Agency. The selected contractor will be responsible for performing hydraulic calculations and installing all necessary components, including sprinkler heads, piping, riser assemblies, and backflow prevention equipment. Additionally, the contractor must manage all permit applications and coordinate inspections with the City of Chino and the Chino Valley Fire District to ensure the delivery of a fully operational system. To be eligible for this project, contractors must hold a valid California Contractor License C-16. The solicitation was posted on October 29, 2026, with a response deadline of December 17, 2026. This work falls under NAICS code 238220 and is administered through the Contracts and Procurement Department of the Inland Empire Utilities Agency in California.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

in about 1 month

RP5 Storage Building Improvements

Solicitation # IFB-VC-26-006

The Inland Empire Utilities Agency is soliciting bids for the RP5 Storage Building Improvements project, which involves a turnkey conversion of Warehouse 1 at Regional Plant No. 5 into a long-term storage facility. The scope of work includes the engineered design, permitting, and installation of a welded steel pallet racking system and an automatic fire sprinkler system. The project must be completed within 300 calendar days from the Notice of Award, with an engineer's estimate of probable cost set at 377,000 dollars. Award will be based on the lowest overall total cost submitted in the Bid Price Schedule. Bids must be submitted electronically via the PlanetBids System by December 17, 2026, at 2:00 PM. Required submission documents include a signed cover letter, completed bid forms, a 10 percent bid bond, and various certifications such as a Non-Collusion Affidavit and Public Works Contractor Registration. The project follows the 2024 Edition of the Standard Specifications for Public Works Construction, with specific modifications including liquidated damages of 500 dollars per calendar day and defined markups for force account work. Final acceptance is contingent upon a successful punch list walk-through, City of Chino approvals, and the submission of comprehensive closeout documentation including as-built layouts and manufacturer warranties.

Other Building Equipment Contractors

POSTED

DEADLINE

in about 1 month

Transformer Maintenance Training and SOP DevelopmentThe Transformer Maintenance Training and SOP Development subcontract, issued by the Contracts and Procurement Department of Inland Empire Utilities Agency in California, focuses on enhancing technical capabilities for transformer projects. The selected contractor is responsible for drafting Standard Operating Procedures specifically for oil sample collection and conducting on-site technical training for Agency personnel. This training encompasses the safe execution of oil sampling and the proper utilization of IR cameras. To ensure professional quality and safety, the trainer must adhere to ASNT Thermography standards. The primary deliverables for this engagement include the finalized written SOP documents and the successful completion of all scheduled training sessions. Interested parties must respond by December 23, 2026, under NAICS code 611430.

Professional and Management Development Training

POSTED

about 1 month ago

DEADLINE

in about 1 month

Transformer Oil Testing and AnalysisThis subcontract opportunity, titled Transformer Oil Testing and Analysis, is issued by the Contracts and Procurement Department of the Inland Empire Utilities Agency in California. The selected contractor will provide specialized laboratory analysis of insulating liquids for prime contractors working on agency transformer projects. The scope of work involves performing detailed chemical and physical analyses of oil samples to detect degradation indicators or contaminants using professional laboratory equipment. All testing and analysis must be conducted in strict accordance with ASTM D923 standards. The contractor is responsible for delivering comprehensive laboratory test results and detailed analysis reports. Interested parties should note that the response deadline for this opportunity is December 23, 2026, and the work falls under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 1 month ago

DEADLINE

in about 1 month

Installation of External Transformer Oil Sampling DevicesThis subcontract involves the installation of standardized external oil sampling devices for prime contractors working on Inland Empire Utilities Agency transformer projects. The selected provider will be responsible for selecting and installing temperature-rated seals, hoses, and fittings to ensure leak-proof oil collection that does not require access to internal compartments. All work must result in fully installed and operational devices that adhere to ASTM D923 and NFPA 70E standards. Eligible candidates must hold a valid California C-20 license. This opportunity is managed by the Contracts and Procurement Department of the Inland Empire Utilities Agency in California, with a response deadline set for December 23, 2026.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 1 month ago

DEADLINE

in about 1 month

Earlier notices in this NAICS code

Posted before this notice, open and closed

Custom Machining and Fabrication Services

POSTED

DEADLINE

Sign Post Hardware and Accessory Supply

Planning and Public Works

POSTED

DEADLINE

Sign Hardware & Mounting Supplier

POSTED

DEADLINE

Hastelloy Coreholder Fabrication and Supply

Texas A&M University

POSTED

CLOSED

Industrial Flanges

POSTED

DEADLINE

in about 23 hours

Hydraulic and Pneumatic Fittings Supplier

Long Beach Public Utilities Department

POSTED

DEADLINE

Precision Machining and Component Fabrication

Santa Clara Valley Water District (Valley Water)

POSTED

DEADLINE

Prop Battery Door Supplier

Dallas Area Rapid Transit

POSTED

CLOSED

Precision Component Manufacturing (Conversion Kit)

Dallas Area Rapid Transit

POSTED

CLOSED

On-Call Fabrication, Machining, Welding & Specialized Mechanical Repair Services

Solicitation # RFQ-000873

City of Baltimore, Bureau of Procurement

POSTED

DEADLINE

Fire Hose Fittings and Hardware Supply

Jefferson Parish Government

POSTED

CLOSED

Supply of Custom Cut A1111BS Components

Department of the California Highway Patrol

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Get full access

Join 750+ contractors already using CLEATUS