Top

Quality and Safety Management Services

Active

State & Local

Response Deadline07/24/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Pennsylvania → Luzerne CountyView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Luzerne County, PA, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 9

subcontract

Response DeadlineJul 24

Submission deadline

Response Deadline

07/24/2026, 04:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyPennsylvania → Luzerne County

ContactsNo contacts available

OfficeN/A

Organization / Agency

Pennsylvania → Luzerne County

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Provision of Quality and Safety Managers to oversee compliance, documentation, inspections, and hazard communication programs on site.

Similar Contracts

Same NAICS industry code

NAICS: 541330

New

SLED

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services through an indefinite-delivery, indefinite-quantity contract for major construction projects across various phases including planning, design, construction, and closeout. The scope encompasses support for multiple delivery methods such as Design Build, Progressive Design Build, and other alternative delivery approaches, with an emphasis on ensuring projects adhere to approved schedules, budgets, and quality standards. This contract will serve as a vehicle for procuring CM services on an as-needed basis to support the Port’s evolving infrastructure initiatives. The contract is categorized under NAICS code 541330 for Architectural, Engineering, and Related Services and is managed by the Port of Seattle’s Construction Management office. Primary point of contact for inquiries is Hala Rabbo, with additional support available through Project Manager Ann Davidson. The solicitation was posted on July 21, 2026, and interested parties can access further details via the Port’s official portal. There is no set-aside classification indicated, and performance is expected to occur at various locations under the Port’s jurisdiction.

Construction Management

POSTED

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, operating within a 24/7/365 environment that demands continuous reliability and safety. The work centers on identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance performance, energy efficiency, occupant comfort, system longevity, and compliance with applicable regulations. All services will be executed through Service Directives and require close collaboration with Aviation Facilities and Infrastructure to meet defined deliverables and operational standards. The contract is structured as an Indefinite-Delivery/Indefinite-Quantity agreement under NAICS code 541330, managed by the Port of Seattle’s Aviation Facilities & Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as Project Manager; inquiries and communications should be directed through their provided contacts. The solicitation was posted on July 21, 2026, with performance expected to take place at the airport. There is no specified set-aside type, and the contract is designed to support ongoing and evolving needs across the airport’s critical infrastructure systems.

Aviation Facilities & Infrastructure

POSTED

DEADLINE

IFB 26-00409, Veeder Root System Upgrade ProjectHampton Roads Transit is soliciting bids for the procurement and installation of Veeder-Root TLS450 Plus fuel and lubricant monitoring systems across its facilities in Hampton Roads, Virginia. The project requires qualified contractors to furnish, install, configure, test, and commission the systems to ensure accurate tracking and management of fuel and lubricant usage. The solicitation, identified as IFB-124728 under the title IFB 26-00409, was posted on July 20, 2026, and bids must be submitted by August 20, 2026, at 7:00 PM EST. The work is to be performed entirely within the Hampton Roads region, and all responses must be submitted through the designated online vendor portal. Interested parties should direct inquiries to Fevrier Valmond, the designated point of contact, via email at fvalmond@hrtransit.org or phone at 757-222-6000.

Hampton Roads Transit

POSTED

DEADLINE

Quality Inspection & Compliance MonitoringThe contract pertains to third-party inspection services aimed at verifying the quality and compliance of crack sealing operations on transportation infrastructure, with specific focus on depth, width, and adhesion properties. The inspections must align with technical standards set by the Texas Department of Transportation and AASHTO, ensuring that all work meets rigorous performance and durability requirements. Comprehensive documentation and detailed reporting are required as part of the quality assurance process to validate compliance and facilitate ongoing maintenance oversight. This subcontract is issued by the Texas Department of Transportation under NAICS code 541330, which categorizes it under architectural, engineering, and related services. The solicitation was posted on July 20, 2026, with a response deadline of August 11, 2026, and is accessible via the Texas SmartBuy portal. Performance of the work is expected to occur across Texas state-maintained roadways, though specific locations are not detailed. The contract emphasizes objective evaluation and transparent reporting to support state-level infrastructure integrity and regulatory compliance.

Texas Department of Transportation

POSTED

DEADLINE

Roadway Inspection and Quality AssuranceThe contract titled Roadway Inspection and Quality Assurance requires the performance of inspections to ensure that all maintenance operations on Texas roadways meet the technical and safety standards established by the Texas Department of Transportation. These inspections focus on verifying surface quality, the appropriateness and condition of materials used, and adherence to safety protocols during execution of work. The effort is critical to maintaining infrastructure integrity and public safety across the state’s transportation network. The contract is structured as a subcontract and falls under NAICS code 541330, indicating it involves architectural, engineering, and related services. The solicitation was posted on July 20, 2026, with a response deadline of August 12, 2026, at 4:00 PM Central Time. All performance is expected to occur within Texas, though specific cities or locations are not detailed in the provided information. The contract is managed by the Texas Department of Transportation under its Texas organizational unit, with no set-aside provisions identified. Interested parties must submit responses through the designated portal at the provided Texas SmartBuy link, and all qualified subcontractors are expected to comply fully with TxDOT’s regulatory and operational guidelines throughout the inspection process.

Texas Department of Transportation

POSTED

DEADLINE

Inspection and Quality Assurance SupportThe contract involves providing on-site inspection and quality assurance support for infrastructure projects under the Texas Department of Transportation, focusing on verifying work quality, documenting completed tasks, and assisting the prime contractor during TxDOT acceptance inspections. This subcontract requires personnel to be physically present at project sites to ensure compliance with technical standards, maintain accurate records of construction progress, and serve as a liaison during official inspections to facilitate smooth acceptance processes. The opportunity is open for submissions until August 12, 2026, and is classified under NAICS code 541330, which pertains to engineering services. It is positioned as a subcontract and does not specify any set-aside status or organizational type restrictions. The place of performance is unspecified in the posted data but will be tied to active TxDOT projects across the state. Interested parties must access the full solicitation through the provided Texas SmartBuy portal link to understand scope expectations, deliverables, and contract terms.

Texas Department of Transportation

POSTED

DEADLINE

Inspection and Quality Control SupportThis contract seeks support for inspection and quality control activities related to field verification of material placement, compaction, and grading on transportation projects to ensure full compliance with Texas Department of Transportation standards. The work involves on-site monitoring and documentation to verify that construction practices meet engineered specifications and regulatory requirements, with a primary focus on ensuring structural integrity and long-term performance of roadways and related infrastructure. All tasks must be performed in alignment with TxDOT protocols and may include testing, reporting, and coordination with project teams to resolve non-conformances in a timely manner. The opportunity is structured as a subcontract under NAICS code 541330, indicating it relates to engineering services, and is posted on the Texas SmartBuy portal with a response deadline of August 12, 2026. While the solicitation number is not provided, the contract is managed by the Texas Department of Transportation and will be performed somewhere within the state of Texas without a specified city or zip code. The scope does not indicate any set-aside classifications, and there is no designated point of contact listed, suggesting that all inquiries should be directed through the provided portal link. Interested parties must submit their proposals before the deadline to be considered for award.

Texas Department of Transportation

POSTED

DEADLINE

Electrical Engineering Design Services for Parks InfrastructureThe City of Issaquah is seeking qualified firms to provide professional electrical engineering design services for public park infrastructure, focusing on lighting, power distribution, and control systems. The scope requires full compliance with Washington State electrical codes and standards, and all deliverables must be stamped by a licensed Professional Engineer (PE) to ensure regulatory adherence and public safety. This subcontract opportunity is open to firms capable of delivering detailed, code-compliant designs that support the city’s infrastructure improvements, with a strong emphasis on reliability, energy efficiency, and long-term maintainability of park systems. The solicitation was posted on July 20, 2026, and responses are due by August 14, 2026, at 11:00 PM Eastern Time. The NAICS code 541330 identifies this as engineering services, specifically electrical engineering, and the contract is classified as a subcontract under the city’s broader public works initiative. While no set-aside type is specified, applicants must be prepared to meet all applicable state and local requirements for public infrastructure projects. Proposals should demonstrate prior experience with municipal park projects, familiarity with Washington State regulatory frameworks, and the ability to coordinate with other design and construction teams to ensure seamless integration of electrical systems into park environments.

POSTED

DEADLINE

RFQ PARKS- On-Call Electrical Engineering Consultants for Parks & Recreation ProjectsThe City of Issaquah’s Parks and Community Services Department is soliciting qualified electrical engineering consultants on an on-call basis to support a variety of electrical engineering needs for parks and recreation projects. These services may range from supporting larger capital improvements to addressing one-time or urgent engineering requirements, with work being issued through individual task orders that align with the format outlined in Professional Services Agreement—Attachment C. The City plans to select up to two firms to ensure broad expertise and flexibility in addressing diverse project demands, though no minimum volume of work is guaranteed and the timing and extent of assignments will vary significantly. Interested firms must respond by the deadline of August 14, 2026, with all submissions directed to the designated point of contact, Robin Spear, at the City of Issaquah. The solicitation is open to qualified electrical engineering consultants capable of delivering professional services within Washington State, particularly in support of municipal parks and recreation infrastructure. There is no set-aside designation specified, and while no guaranteed work volume exists, selected firms will be contacted as needs arise, with each task order independently authorized and managed. Proposals should demonstrate relevant experience, capacity, and ability to meet the City’s technical and operational expectations across a range of electrical engineering applications.

POSTED

DEADLINE

Geotechnical Report Writing & Peer ReviewThe contract entails the preparation and peer review of comprehensive geotechnical reports for municipal projects undertaken by the City of Issaquah in Washington. The work requires detailed analysis and documentation of site conditions, design parameters, and engineering recommendations to support infrastructure development, with an emphasis on accuracy, thoroughness, and compliance with industry standards. Subcontractors must demonstrate expertise in geotechnical engineering practices and the ability to deliver technically sound reports that inform project design and safety decisions. The opportunity is posted as a subcontract with a NAICS code of 541330, indicating it falls under engineering services, and is open for response until August 14, 2026. While no set-aside provisions or specific organizational requirements are specified, bidders are expected to have the qualifications and experience necessary to handle complex geotechnical evaluations for public infrastructure. The place of performance and point of contact details are not provided, but all work is related to municipal projects within Issaquah, Washington, and proposals must be submitted via the designated public procurement portal by the stated deadline.

POSTED

DEADLINE

Earth Retaining Structure DesignThe City of Issaquah is seeking a subcontractor to design earth retaining structures including retaining walls, soil nail walls, and reinforced soil slopes to support park grading, trail access, and erosion control efforts in hilly terrain. The work must address complex geotechnical challenges inherent to steep landscapes, ensuring structural stability, long-term durability, and environmental compatibility. The design scope requires engineering solutions that integrate with natural topography while meeting safety and regulatory standards for public infrastructure. The solicitation was posted on July 20, 2026, with responses due by August 14, 2026, under NAICS code 541330 for engineering services. This is a subcontract opportunity, indicating the selected firm will work under a prime contractor or larger project team. The place of performance is in Issaquah, Washington, and all work must comply with local and state requirements for land development and geotechnical engineering. Interested parties should submit proposals through the provided public purchase portal before the deadline.

POSTED

DEADLINE

Foundation Design & Shallow/Deep Foundation AnalysisThe contract seeks to evaluate soil data to determine appropriate foundation systems for various park structures including restrooms, pavilions, and bridges, with recommendations for spread footings, driven piles, or drilled shafts based on geotechnical conditions. The work requires technical analysis of subsurface conditions to ensure structural stability and compliance with engineering standards for public infrastructure. The solicitation is classified as a subcontract under NAICS code 541330, indicating it pertains to engineering services, and is issued by the City of Issaquah in Washington. Submission deadlines are set for August 14, 2026, with the opportunity posted on July 20, 2026, and all work is expected to be performed at park locations within the city. There is no set-aside designation specified, and the contract is open to qualified subcontractors with expertise in geotechnical evaluation and foundation design for municipal projects.

POSTED

DEADLINE

More opportunities from Pennsylvania → Luzerne County

Same awarding agency

New

SLED

RFP #26-07-001 LCTA Engineering For Bus Stop Improvements

POSTED

DEADLINE

Surveying and Site Layout ServicesLuzerne County is seeking qualified contractors to provide comprehensive surveying and site layout services for project sites within the county, with a focus on topographic surveys, boundary determination, and construction layout accuracy. The solicitation is issued as a subcontract opportunity under NAICS code 541370, which categorizes it under surveying and mapping services, and it is open to respondents who can deliver precise geospatial data and field verification necessary for infrastructure and development projects. The contract requires adherence to high standards of measurement and documentation to ensure alignment with engineering designs and regulatory land use requirements. Interested parties must submit their proposals by August 5, 2026, at 3:00 PM Eastern Time, with all work expected to be performed within Luzerne County, Pennsylvania. The opportunity does not specify a set-aside classification, meaning it is open to all eligible businesses regardless of size or ownership characteristics. All submissions must demonstrate technical competence in modern surveying equipment, experience with local land regulations, and the ability to coordinate with construction teams. The contract details are accessible via the provided PennBid portal link, and applicants are urged to review all requirements carefully before responding.

Surveying and Mapping (except Geophysical) Services

POSTED

DEADLINE

Roadway Paving and Asphalt ServicesLuzerne County is seeking qualified contractors to perform grading, base preparation, and asphalt paving for roadways, parking lots, and access roads under a subcontract opportunity with NAICS code 237310. The solicitation was posted on July 17, 2026, with a response deadline of August 5, 2026, at 3:00 PM. Work is to be performed within Luzerne County, Pennsylvania, though specific project locations within the county are not detailed. No set-aside provisions or small business preferences are indicated, and the contract is open to general subcontractors who meet technical and performance requirements. All submissions must be made through the PennBid portal at the provided URL, and no point of contact information is listed for inquiries.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Concrete Forming and PlacementThe contract titled Concrete Forming and Placement involves the execution of formwork construction, reinforcement installation, and concrete pouring for structural components including slabs, walls, and foundations. This subcontract is issued by Luzerne County in Pennsylvania and is categorized under NAICS code 238110, which corresponds to concrete work services. The opportunity was posted on July 17, 2026, with a response deadline set for August 5, 2026, at 3:00 PM, requiring all proposals to be submitted prior to this time. Work under this contract is to be performed within Luzerne County, and bidders must be prepared to meet project-specific standards for structural integrity, safety, and timeline adherence without additional guidance provided through point of contact information. Participation is limited to subcontractors eligible to fulfill the scope of concrete forming and placement activities as defined in the solicitation.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Plumbing and Piping Systems InstallationThe contract titled Plumbing and Piping Systems Installation involves the comprehensive installation of plumbing systems within buildings or facilities, encompassing water supply, drainage, and gas piping. It is classified as a subcontract under NAICS code 238220 and is issued by Luzerne County in Pennsylvania, with performance expected to occur within Luzerne County. The solicitation was posted on July 17, 2026, and responses are due by August 5, 2026, at 3:00 PM Eastern Time. The contract does not specify a set-aside type or organizational requirements, and no point of contact information is provided. Interested parties must access the opportunity through the provided PennBid link to submit proposals.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Electrical Installation and Wiring ServicesThe contract titled Electrical Installation and Wiring Services pertains to the installation of electrical systems for commercial or infrastructure projects within Luzerne County, Pennsylvania, and includes wiring, conduits, electrical panels, and lighting fixtures. It is categorized as a subcontract with a NAICS code of 238210, indicating it falls under electrical contracting services. The solicitation was posted on July 17, 2026, and responses are due by August 5, 2026, at 3:00 PM. The place of performance is specifically identified as Luzerne County, though no further geographic details or office address information are provided. The contracting agency is Luzerne County under the state of Pennsylvania, and while no point of contact is listed, the opportunity can be accessed via the provided PennBid portal link.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

DEADLINE

Foster Township - Community Park (0325-602062.33)Sealed bids for the Foster Township Community Park project are being solicited online via the PennBid Program, with a deadline of August 5, 2026, at 11:00 A.M. prevailing time, and bid results will be publicly disclosed during the Township Supervisors meeting on the same day at 6:30 P.M., with results posted at http://PennBid.bonfirehub.com. The project is divided into two separate contracts: Project A involves the supply and installation of play structures, safety surfacing, ADA-accessible paths, picnic tables, signs, and other site amenities, while Project B entails the construction of a basketball court and pickleball court. Each project will be awarded independently to the lowest responsive and responsible bidder. All bidding documents, including specifications, drawings, and contract forms, are available at no cost on the PennBid portal. Bidders must submit a bid security equal to 10% of their total bid amount in the form of a certified check, bank draft, or approved bid bond. Successful contractors must furnish performance and payment bonds totaling 100% of the contract value, issued by a surety approved by Foster Township. The project is subject to Pennsylvania’s Public Works Employment Verification Act, requiring submission of the Public Works Employment Verification Form with each bid, and compliance with the Pennsylvania Human Relations Act, which mandates equal employment opportunity without discrimination based on race, age, color, religion, sex, ancestry, national origin, or handicap. Certified weekly payrolls must be submitted, and contractors must adhere to minimum wage requirements set forth in the contract documents. Bidders must also comply with OSHA regulations, the Americans with Disabilities Act, Pennsylvania’s Construction Code Act, and the Pennsylvania Steel Products Procurement Act. All equipment must meet ASTM F1487 or CSA Z-614 standards and carry age-appropriate labeling at eye level, and pavement-marking materials must be delivered in original sealed packaging with proper labeling. Bids must be completed electronically on the PennBid system, including full completion of all line items and acknowledgment of any addenda. Bidders are required to provide their Federal ID and UEI numbers, a non-collusion affidavit, evidence of authority to operate in Pennsylvania, and a complete set of certifications including those related to non-segregated facilities, illegal alien labor, contractor responsibility, and the Right to Know Law. No bid may be withdrawn within 60 days after bid opening, and the Owner reserves the right to reject any or all

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Keystone Human Services Homes Remodel RebidKeystone Human Services is seeking a qualified general contractor to remodel three single-story residential properties in the Wilkes-Barre area to meet ADA accessibility standards, with work encompassing comprehensive interior and exterior improvements including ramps, renovated bathrooms with new plumbing fixtures, new HVAC systems, updated lighting and electrical work, new finishes, vinyl siding, windows, driveway regrading, sidewalk leveling, and the addition of accessible outdoor decks and porches. Bidders are required to submit a lump-sum proposal for all three properties—bidding on only one or two is strictly prohibited—and must do so electronically via the PennBid platform by 10:00 a.m. on June 16, 2026. Attendance at a mandatory prebid meeting and site walkthrough on May 26, 2026, at 6 Valleyview Drive, Swoyersville, PA, is required for all prospective bidders. All project documents, including specifications, drawings, and bid forms, are accessible solely through PennBid, with no paper sets provided; questions must be submitted through the portal and will be answered publicly by the architect until June 9, 2026. The project is partially funded by the Redevelopment Assistance Capital Program, and while the contract is structured under AIA A201–2017 standards, it functions as a firm fixed price agreement with stipulated sum payment terms and includes allowances for landscaping and electrical work at each site. Submittals must adhere to strict documentation requirements, including compliance verification, manufacturer installation instructions, warranty certifications, and approved mockups, with inspections and acceptance occurring on-site under the authority of the architect, who serves as the initial decision maker. The contractor is responsible for all testing, coordination, and closeout documentation, including submission of bond certificates, insurance, lien waivers, and proof of tax compliance, with no federal acquisition regulation clauses applied. The estimated contract value derived from allowances totals $30,000, though this is not indicative of the full contract sum, as base bid pricing remains unspecified.

Residential Remodelers

POSTED

DEADLINE

Subcontractor and Supplier Coordination & Bonding Compliance

Other Accounting Services

POSTED

DEADLINE

Site Preparation and Grading

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Asphalt Supply (Materials Only)

Asphalt Paving Mixture and Block Manufacturing

POSTED

DEADLINE

Traffic Striping and Pavement Marking Installation

All Other Specialty Trade Contractors

POSTED

12 days ago

DEADLINE

in 3 days

View Details