Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Inspection and Acceptance Support

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires comprehensive pre-shipment inspection and documentation services to verify that valves comply with all Department of Defense Logistics Agency technical specifications, packaging requirements, and military standards before government acceptance. The work is focused on ensuring product conformity through rigorous quality control measures at the place of performance in Tracy, California, with a ZIP code of 95304-5000. All inspections must be conducted in accordance with DLA protocols to confirm that each valve meets the defined performance, durability, and packaging criteria necessary for military use. This is a subcontract solicitation under NAICS code 811212, with a response deadline of August 6, 2026, and was posted on August 3, 2026. The contracting entity is DLA Dist San Joaquin under the Department of Defense, and participation is open without any specific set-aside designation. The successful bidder must be prepared to deliver detailed documentation alongside inspection results to facilitate timely government acceptance, with no provision for alternative performance locations specified. All activities must align strictly with DLA's established procedures for military-grade valving systems, emphasizing precision, traceability, and adherence to federal standards.

General Info

Pre-shipment inspection of valves at Tracy, CA to ensure DLA technical compliance and military acceptance.

Agency

Department Of Defense → DLA DIST SAN JOAQUINView Agency

NAICS

811212 - Computer and Office Machine Repair and MaintenanceView NAICS

Place of Performance

TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 3

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 1 day

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → DLA DIST SAN JOAQUIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Pre-shipment inspection and documentation to ensure valves meet DLA technical, packaging, and military standards prior to government acceptance.

Similar Contracts

Same NAICS industry code

Installation of AER SystemThe contract involves the on-site installation of the Advantage Plus AER system at a Department of Veterans Affairs facility, with all work to be conducted during regular business hours in full compliance with VA facility protocols, ensuring minimal disruption to operations and adherence to security and safety standards. The work is classified as a subcontract under NAICS code 811212, which pertains to electronic equipment repair and maintenance services, and is managed by the 242-NETWORK Contract Office 02 (36C242). All responses to this solicitation must be submitted by August 10, 2026, at 5:00 p.m., with the opportunity advertised as of August 4, 2026. While specific location details including city, state, and zip code are not provided, the place of performance is clearly defined as a VA facility. There is no set-aside designation indicated, and the contract does not include a designated point of contact within the provided data. Interested parties must review the full solicitation through the provided SAM.gov link to ensure complete understanding of requirements and expectations.

242-NETWORK Contract Office 02 (36C242)

POSTED

about 12 hours ago

DEADLINE

Warranty and Technical Support ServicesThe contract requires the provision of manufacturer-level warranty services for PCR systems, encompassing comprehensive coverage of parts, labor, technical support, and software updates throughout the agreed service period. This obligation ensures that all equipment remains fully operational and current with the latest software enhancements, with all maintenance and repair activities to be conducted at the highest standard of technical proficiency. The warranty must be honored promptly and without undue delay, maintaining system performance and reliability for end users. The contract is a subcontract under the Department of Veterans Affairs, managed by the 246-NETWORK Contracting Office 6, with performance specifically designated for Durham, North Carolina, 27705. It was posted on August 4, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 811212, which pertains to medical and diagnostic equipment repair and maintenance. The contract does not specify any set aside status or small business designation, and the point of contact information is not provided in the published data. Suppliers must respond by the deadline to be considered for award and must demonstrate capacity to deliver all mandated warranty services at the manufacturer’s level.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 12 hours ago

DEADLINE

On-Site Installation and CalibrationThe contract requires the delivery, installation, configuration, calibration, and operational verification of new PCR systems at a designated location in Durham, North Carolina, with an official zip code of 27705. All activities must be performed on-site and coordinated directly with the Contracting Officer’s Representative to ensure compliance with technical and procedural requirements. The work falls under NAICS code 811212, indicating a focus on medical and diagnostic laboratory services, and is structured as a subcontract under the Department of Veterans Affairs, specifically managed by the 246-NETWORK Contracting Office 6. The solicitation was posted on August 4, 2026, with a firm response deadline of August 12, 2026, at 2:00 PM Eastern Time. All responsibilities include ensuring system functionality meets specified standards and that documentation supports successful verification of performance post-installation.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 12 hours ago

DEADLINE

On-Site Commissioning and Start-Up ServicesThe contract outlines the execution of on-site commissioning, functional testing, and start-up services for a generator and load bank system, with a focus on performance verification and seamless integration into the existing infrastructure. All work must be completed at the designated location under the jurisdiction of the Eastern Municipal Water District in California, ensuring the equipment operates within specified parameters and meets all technical and safety standards. The services require skilled personnel to conduct comprehensive system checks, validate operational readiness, and confirm compatibility with connected systems prior to handover. Subcontractors must submit proposals by the deadline of August 24, 2026, and the opportunity is classified under NAICS code 811212, indicating it pertains to industrial and commercial machinery and equipment repair and maintenance. There is no set-aside designation, and the solicitation is open to qualified vendors without geographic or demographic restrictions. The work is expected to be performed on-site, and successful bidders will be responsible for all logistics, equipment, labor, and documentation required to complete the commissioning and start-up process in full compliance with project requirements.

Eastern Municipal Water District

POSTED

DEADLINE

Domestic Manufacturing & Buy American ComplianceThis contract requires comprehensive supply chain audits and certification to verify compliance with the Buy American Act and DFARS 252.225-7001, ensuring that all components are domestically sourced in accordance with federal procurement regulations. The work involves detailed evaluation of manufacturing processes, supplier documentation, and material origins to confirm that end products meet stringent domestic content requirements under the Department of Defense’s maritime supply chain standards. Certification must demonstrate full transparency and traceability of all components from raw material to finished good, with adherence to the specified NAICS code 811212 for industrial machinery and equipment repair. Performance is to be carried out at the designated location in New Cumberland, Pennsylvania, with a strict response deadline of August 14, 2026, following the posting date of August 3, 2026. The solicitation is structured as a subcontract, indicating it is an extension of a broader prime contract within the defense supply chain. Although no set-aside designation is provided, the requirement is embedded within the Department of Defense’s broader initiative to strengthen domestic manufacturing resilience and ensure compliance with statutory sourcing mandates. Contractors must be prepared to deliver rigorous documentation, audit trails, and certification reports that withstand federal scrutiny and uphold the integrity of the domestic sourcing commitments.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Counterfeit Electronic Parts Mitigation

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Bar-Coding and Marking Services per MIL-STD-129The contract involves the application of standardized bar codes and markings on packaging in strict accordance with MIL-STD-129, requiring the use of UCC/ITF-14 or Data Matrix symbologies to ensure accurate and reliable identification throughout the supply chain. All packaging must include properly formatted Ship-To, Ship-From, and Mark-For data to support seamless logistical tracking and handling by the Department of Defense. This service is essential for maintaining compliance with federal military standards and enabling efficient inventory control and distribution operations. The work is classified as a subcontract under NAICS code 811212 and is administered by the Defense Logistics Agency. It was posted on August 3, 2026, with an associated award reference number SPE7MC26P3277. While specific performance locations and point of contact details are not provided, the contract is tied to defense logistics requirements and applies to all packaging under the purview of the Department of Defense. Compliance with MIL-STD-129 is mandatory, and failure to meet these marking and barcoding specifications could result in rejection of delivered goods.

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection & Destination Acceptance SupportThis contract seeks a small business subcontractor to provide post-shipment quality assurance services focused on ensuring product compliance and facilitating destination acceptance for deliveries under the Department of Defense’s Strategic Acquisition Program Directorate. The scope includes performing quality inspections after shipment, managing corrective actions for any rejected deliveries, and providing comprehensive documentation support to assist with inspections at the final destination. The requirement is set aside exclusively for total small businesses under the SBA’s Small Business Set-Aside program, classified under NAICS code 811212, indicating a focus on repair and maintenance services. Proposals must be submitted by August 18, 2026, following the posting date of August 3, 2026, with all work expected to support defense logistics operations and uphold strict quality standards for delivered items.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

Barcoding and Labeling ServicesThe contract requires the application of durable, MIL-STD-129-compliant barcodes and labels to military kits and shipping containers, ensuring accurate tracking and logistics support through the inclusion of NSN, part number, and quantity data. This work must meet strict military standards for durability and readability under operational conditions, and the labels must be securely affixed to ensure longevity during handling and transit. The service is critical for maintaining inventory integrity and supply chain efficiency across Department of Defense operations. The contract is classified as a subcontract, with a solicitation posted on August 3, 2026, and a response deadline of August 11, 2026. It falls under NAICS code 811212 and is associated with the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. All work must be performed at Robins Air Force Base, Georgia, with a zip code of 31098-1887. The contract is not subject to any specified set-aside status and requires full compliance with military barcode standards without exception.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Defense-Compliant Marking, Barcoding, and Traceability ServicesThe contract requires the application of permanent physical markings, 2D Data Matrix barcodes, and labels to items and containers in strict compliance with MIL-STD-129 and RQ017 standards to ensure full traceability for the Department of Defense. All work must adhere to DoD-mandated specifications for durability, readability, and data accuracy to support logistics and supply chain operations across military installations and operations. The services are subcontracted under the ASC COMMODITIES DIVISION and are governed by NAICS code 811212, indicating a focus on industrial and commercial equipment maintenance and repair services. The solicitation was posted on August 3, 2026, with responses due by August 11, 2026, and the place of performance is not specified, suggesting flexibility in execution locations as long as contractual requirements are met. The contract falls under a subcontract arrangement with no set-aside designation, meaning it is open to all qualified entities regardless of business size or ownership status. Interested parties must access the full details via the provided DIBBS link to ensure full alignment with technical and procedural expectations before bidding.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Counterfeit Electronic Parts Detection and AvoidanceThe contract requires the implementation and maintenance of a system designed to detect and prevent the introduction of counterfeit electronic components into the supply chain, ensuring the integrity and reliability of all electronic parts used in defense-related applications. This system must be capable of identifying fraudulent, altered, or substandard components at multiple stages of procurement, manufacturing, and distribution, incorporating advanced verification technologies, inspection protocols, and data tracking mechanisms to mitigate risks associated with counterfeit electronics. The solution must be scalable, adaptable to evolving threats, and fully integrated into existing logistics and quality assurance frameworks. This subcontract is issued under the Department of Defense with a NAICS code of 811212, specifying services related to electronic equipment repair and maintenance. The solicitation is open for responses through August 13, 2026, with no set-aside restrictions indicated. Performance is expected to support defense infrastructure nationwide, though no specific location is designated. The contractor must demonstrate technical proficiency in supply chain security, electronic component analysis, and compliance with federal standards for hardware authenticity, ensuring the system remains effective against both current and emerging counterfeiting techniques without disruption to operational timelines or mission readiness.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Military Shipment Marking and LabelingThe contract entitled Military Shipment Marking and Labeling requires the application of standardized military markings and hazard warning labels to unit containers in strict compliance with MIL-STD-129 and OSHA HazCom standards. This subcontract is issued under a Total Small Business Set-Aside designation, reserving the opportunity exclusively for small businesses as defined by the SBA, and is classified under NAICS code 811212, which pertains to commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on August 3, 2026, with a response deadline of August 18, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Work must be performed in accordance with federal contracting guidelines, though the specific place of performance is not designated in the provided data. All contractors must ensure precise adherence to both military and chemical hazard communication requirements to meet operational and safety standards for defense logistics.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

HEATING ELEMENT, ELE

Solicitation # SPE8E8-26-Q-0447

The contract pertains to the procurement of 86 electrical heating elements, nonimmersion type, identified by NSN 4520-01-391-8325, under solicitation SPE8E8-26-Q-0447, with a required delivery within 90 days of award. The procurement is managed by DLA Dist San Joaquin under the Department of Defense, with performance to occur in Tracy, California, 95304-5000. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the official DLA website, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract incorporates DLA packaging requirements and affirms that covered defense information may apply. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable fluorescent lamps and instruments containing mercury must be shockproof and equipped with a secondary containment boundary in accordance with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies. The point of contact for inquiries is Jennifer Luczkowski, with email and phone provided, and responses are due by August 11, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

PRODUCTION LOT TESTING

Solicitation # SPE7L7-26-T-4560

The contract under solicitation number SPE7L7-26-T-4560 is for Production Lot Testing of an item with NSN 0001S00000062, quantity 449 units, to be delivered within 699 days after award. The work is performance under the Department of Defense through DLA San Joaquin, with the place of performance located in Tracy, California, 95304-5000. The solicitation was posted on August 4, 2026, with proposals due on August 17, 2026, and falls under NAICS code 335910 for other electrical equipment and component manufacturing. The contractor must conduct production lot testing and prepare a formal test report labeled clearly with the contract number and lot/item number, then present it to the Quality Assurance Representative for review. All shipments of PLT reports must be accompanied by signed DD Form 1222 and DD Form 250 or iRAPT receiving reports, a copy of the contract or order, all applicable test reports showing actual results against specified tolerances, material and process certifications, operation and inspection method sheets, and drawings used in manufacturing the tested samples, with proper markings to restrict public disclosure and limit government use as required. Primary point of contact for inquiries is Molly Teegarden, reachable at 614-557-3110 or molly.teegarden@dla.mil.

Battery Manufacturing

POSTED

about 7 hours ago

DEADLINE

VALVE, BUTTERFLY

Solicitation # SPE7MC-26-T-167D

The contract pertains to the procurement of two butterfly valves with part number 24JG56431X and NSN 4820-01-728-8390, supplied by Crane Co Valve Division. The valves are designated as a critical application item and must comply with strict material restrictions, including a complete prohibition on the intentional addition of mercury or mercury-containing compounds, except for specific functional uses in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents approved by NAVSEA. Portable devices containing mercury must be shockproof and feature a secondary containment barrier, as mandated by NAVSEA 5100-003D. The valves are to be delivered FOB origin within 140 days, with no variance allowed in quantity, and are subject to inspection and acceptance at the destination. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with special marking code 00-00 indicating no additional requirements. Palletization follows DLA’s RP001 packaging requirements. Delivery is directed to the designated receiving warehouse in Tracy, California, with a need ship date of January 5, 2027, and an original required delivery date of February 28, 2027. The contract was issued under solicitation SPE7MC-26-T-167D by DLA Dist San Joaquin, a Department of Defense agency, with the point of contact being Paula Mcclary.

Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

BUBBLER, DRINKING FOUNT

Solicitation # SPE8E8-26-T-4957

The contract is for the procurement of 120 units of a bubbling drinking fountain with part number 030774-006 and NSN 4510014733230, awarded under solicitation SPE8E8-26-T-4957 by the Defense Logistics Agency District San Joaquin. Delivery is required within 58 days of contract award, with all items to be shipped FOB origin and inspected and accepted at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific unit packaging, cushioning, and marking requirements, with no special marking codes applied. The item is classified as a critical application item and must adhere strictly to DLA packaging and technical requirements, including the prohibition of intentional use of mercury or mercury-containing compounds, except for specific exempted applications such as batteries, fluorescent lamps, and instrumentation meeting NAVSEA 5100-003D standards, which must include secondary containment. Delivery is to be made to the designated warehouse in Tracy, California, and transportation logistics follow DLA procedural notes C19 and C20. The contract specifies a zero variance on quantity, with a required delivery date of August 4, 2026, and solicitation responses due by August 17, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, and source approval documentation must be submitted under RC001 for any non-conforming suppliers.

Plumbing Fixture Fitting and Trim Manufacturing

POSTED

about 7 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-167F

The contract specifies the procurement of five safety relief valves, identified by NSN 4820-01-521-3089 and part number P052935-00044, manufactured by TIMKEN GEARS & SERVICES INC. The item is designated as a critical application item and must comply with all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, which supersede any other standards including ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and packaging guidelines, with palletization following DLA’s RP001 requirements. The contract requires delivery of all units FOB origin within 140 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The delivery address is DLA Dist San Joaquin in Tracy, California, and the original required delivery date is January 15, 2027, with a need ship date of January 5, 2027. The solicitation, issued under contract number SPE7MC-26-T-167F, was posted on August 4, 2026, with responses due by August 17, 2026, and falls under NAICS code 332911. All shipments must follow DLA Transportation Procurement Notes C19 and C20, and the point of contact for the solicitation is Paula McClary, reachable via email and phone as provided.

Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7L7-26-Q-2111

The contract is for the procurement of two box end assemblies for a gun, identified by NSN 0001S00000053, with a delivery requirement of 330 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item falls under Category I munitions and requires demilitarization in accordance with DoD guidelines. Cybersecurity compliance mandates CMMC Level 2, either through self-assessment or certification by a third-party assessment organization. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or variance requests, and inspection and acceptance occur at the manufacturer’s origin. Government identification must be removed from non-accepted items, and bare items must be physically marked. Item Unique Identification is not required per the service customer’s request. Technical data associated with the item is subject to ITAR or EAR export controls; disclosure to foreign persons, including employees of foreign subsidiaries, is prohibited without prior authorization. Access to export-controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA approval. The solicitation number is SPE7L7-26-Q-2111, issued by DLA San Joaquin, with a response deadline of August 14, 2026, and the place of performance is Tracy, California, 95304-5000. The primary point of contact is Charles Duncan at the provided email and phone number.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 7 hours ago

DEADLINE

FILTER ELEMENT, REVE

Solicitation # SPE8E8-26-T-4955

The contract pertains to the procurement of 131 filter elements for reverse osmosis systems, identified by NSN 4610-01-589-8131, under purchase request 7017286982. Delivery is required within 67 days of award, with performance designated for Tracy, California, ZIP 95304-5000. The solicitation number is SPE8E8-26-T-4955, issued by the DLA San Joaquin under the Department of Defense, with a posted date of August 4, 2026, and a response deadline of August 17, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issuance or award date depending on the acquisition size. The NAICS code 333924 indicates the product category, and the contracting office is managed by Alexis Selby, reachable via email and phone. Government identification must be removed from non-accepted supplies as per RQ011, and all submissions must comply with the DLA packaging standards outlined in RP001.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 7 hours ago

DEADLINE

POLISH, PLASTIC

Solicitation # SPE8E5-26-T-3766

This contract specifies the procurement of Polish, Plastic under solicitation SPE8E5-26-T-3766, with a required delivery of 115 cases to be shipped FOB origin within 82 days, targeting a need ship date of June 24, 2026, and an original delivery deadline of November 29, 2026. The item is identified by NSN 7930-01-669-3161 and is classified as a Type I, non-extendable shelf-life item with a 36-month expiration period, subject to strict packaging and marking requirements per MIL-STD-2073-1E and MIL-STD-129, including special labeling code 32 for shelf-life type. Packaging must comply with DLA’s established standards, using a U code, dry preservative method, and intermediate container D3, without cushioning or dunnage, and must be palletized according to DLA guidelines. The contract enforces zero variance in quantity delivery and mandates inspection and acceptance at the destination, with government identification removed from non-accepted items. Technical and quality requirements are incorporated by reference from the DLA Master List, and the item is subject to Covered Defense Information protocols. Delivery is directed to DLA Distribution San Joaquin in Tracy, CA, and transportation follows DLA procedural notes C19 and C20. The unit of issue is the case, with a total contract value of $115.00 per case, and all terms are governed by the DLA revision in effect at the solicitation date.

Polish and Other Sanitation Good Manufacturing

POSTED

about 7 hours ago

DEADLINE

CONTRACTOR FIRST ARTIC

Solicitation # SPE7MC-26-T-166X

The contract specifies the procurement of a flow control valve for E/I winch hydraulic systems, with material requirements limited to aluminum or bronze. An exception is noted where the original equipment manufacturer has updated the part number to R431002638, which is now acceptable alongside the drawing-referenced part number P50493-0001. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The item is subject to defense information controls under RD002 and must comply with DLA packaging standards under RP001. Tailored higher-level quality requirements apply to both manufacturers and non-manufacturers, and inspection and acceptance must occur at the origin. Government identification must be removed from rejected supplies, and technical data associated with the valve is subject to export controls under ITAR or EAR, prohibiting disclosure to foreign persons without authorization. Access to controlled data is restricted to contractors with approved JCP certification, completed DOD export control training, and formal DLA approval. The NSN is 0001S00000053, with 74 units requested under purchase request 7017697083, delivery due in 499 days after award. The solicitation is issued under SPE7MC-26-T-166X as a total small business set-aside, with the contracting activity managed by DLA District San Joaquin, and responses due by August 17, 2026.

Industrial Valve Manufacturing

POSTED

about 7 hours ago

DEADLINE

ANALYZER-CHARGER, BA

Solicitation # SPE7L7-26-T-4561

The contract pertains to the procurement of 456 units of the 490PT+ Pulse Tech Digital Battery Analyzer Tester & Printer, identified by NSN 6130015109594 and part number 741X890, under solicitation SPE7L7-26-T-4561, awarded as a Total Small Business Set-Aside. Delivery is required FOB origin within 128 days of contract award, with no variance allowed in quantity, and inspection and acceptance occur at the destination facility in Tracy, California. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting commercial standards, and must be marked, labeled, and packaged in accordance with MIL-STD-129 and RP001 packaging guidelines. Hazardous material provisions prohibit intentional addition of mercury or mercury-containing compounds unless exempted for specific functional components such as batteries or sensors, and portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must meet ASTM D3951 for non-hazardous items or FED-STD-313 TQ IP025 for hazardous materials. The unit of issue is each, with a total contract value based on a unit price for 456 units, and shipping must adhere to DLA transport procedures C19 and C20. The solicitation closed on August 17, 2026, with a required delivery date of April 15, 2027, and is managed by the Department of Defense through DLA Dist San Joaquin.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

Freight & Logistics Coordination (FOB Origin)The contract requires the arrangement and management of freight logistics to transport a regulating valve from the supplier’s origin to DLA San Joaquin in Tracy, California, with a strict delivery deadline of 157 days. All packaging and marking must comply with applicable regulations to ensure proper handling and identification throughout the shipping process, and timely delivery is essential to meet operational requirements. The contract is classified as a subcontract under NAICS code 484220, indicating a focus on truck transportation, and operates under FOB Origin terms, meaning the supplier assumes responsibility for the goods until they are loaded onto the carrier at the point of origin. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and is managed by the Department of Defense through DLA District San Joaquin. The place of performance is specifically identified as Tracy, CA, with a ZIP code of 95304-5000, and while no point of contact is listed, the official tracking link is provided for further information. The contract does not specify a set-aside type, meaning it is open to all eligible contractors without preference, and the focus is exclusively on executing a secure, compliant, and on-time shipment of the specified item under FOB Origin conditions.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Materials Compliance & Documentation SupportThe contract seeks consulting support to ensure compliance with hazardous materials regulations, focusing on the preparation of safety data sheets, updating hazardous material listings, and maintaining required regulatory documentation in alignment with FAR 52.223-3 and Federal Standard No. 313. The work is intended to support federal obligations related to the safe handling, labeling, and reporting of hazardous substances, requiring expertise in environmental, health, and safety compliance frameworks applicable to Department of Defense operations. The subcontract is open to qualified providers with demonstrated capability in hazardous materials management and regulatory adherence. The contract was posted on August 3, 2026, with a response deadline of August 14, 2026, and is administered by DLA Dist San Joaquin under the NAICS code 541690 for other scientific and technical consulting services. Performance is required at Tracy, California, with a ZIP code of 95304-5000. All work must be completed in accordance with federal standards and will be subject to oversight by the Department of Defense. Interested parties must submit proposals prior to the stated deadline to be considered for award.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE