Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Defense was posted on July 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Quality Inspection and Non-Destructive Testing (NDT) Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541350
New
SLED
HSR26-26 Re-Bid #2 Fresno Building Inspection
Solicitation # HSR26-26
The California High-Speed Rail Authority is soliciting informal bids under solicitation HSR26-26 Re-Bid #2 for a comprehensive on-site building inspection and repair recommendation project for its Fresno Office located at 11111 H Street, Fresno, CA 93721. The selected contractor will be responsible for evaluating all major building systems, including plumbing, sewer, drainage, electrical, HVAC, roofing, security, the building envelope, and life-safety and structural components. Key deliverables include a comprehensive written inspection report with supporting photographs, an executive summary of critical risks, a prioritized list of corrective actions, and rough order-of-magnitude cost estimates for all recommended repairs. The project requires personnel knowledgeable in federal, state, and local building codes, as well as current safety and accessibility standards. The response deadline is November 6, 2026, and the solicitation is categorized under NAICS code 541350. Bidders must provide a valid Class A or Class B license from the California Contractors State License Board and submit several required documents, including a cost sheet, payee data record, and bidder certifications. Evaluation is based on cost reasonableness and past performance, with a 3% to 5% incentive applied for Disabled Veteran Business Enterprise participation. The contract includes strict compliance requirements regarding the Authority's Conflict of Interest Code, the Americans with Disabilities Act, and a ten-year confidentiality survival period. Invoicing is permitted monthly in arrears, and the final report is due five business days after the Authority provides feedback on the initial draft.
California High-Speed Rail Authority

POSTED

about 7 hours ago

DEADLINE

in 9 days
NAICS: 541350
New
SLED
Operation and Management of the Building Department
Solicitation # AD-26-01
The City of Pembroke Pines is soliciting proposals under RFP AD-26-01 for the operation and management of its Building Department. The project utilizes a City-Provided Leadership Model, where the City retains the Chief Building Official and Building Department Operations Manager, while the contractor provides all other necessary administrative, clerical, and technical staff, including Assistant Building Officials, Trade Chiefs, Plan Reviewers, and Inspectors. The selected firm will be responsible for issuing permits, performing inspections, and executing statutory duties in accordance with the Florida Building Code and Broward County Amendments. The contract is for an initial five-year term with one five-year renewal option. Proposals are due by 2:00 pm on November 10, 2026, and must be submitted electronically via the City's e-Procurement Portal. Pricing is based on a proposed percentage of gross revenue derived from building permit fees, with specific daily rates established for key roles such as Assistant Building Officials at 1,500 dollars and Trade Chiefs at 1,000 dollars. Award decisions will be based on the most responsive and advantageous proposal, with preference points available for local Pembroke Pines vendors, Broward County vendors, and Veteran-Owned Small Businesses. Contractors must ensure all personnel have at least three years of relevant experience and hold required state and county certifications. Strict vehicle marking standards are required, including uniform colors and specific City of Pembroke Pines identification. The contractor must also implement a comprehensive Quality Assurance program to track performance metrics such as turnaround times and error rates. Required submittals include a Letter of Intent and a sworn Affidavit of Accuracy.
City Manager's Office

POSTED

2 days ago

DEADLINE

in 13 days
NAICS: 541350
New
SLED
OER Solar Quality Assurance Study and Report
Solicitation # RFP27007093
The State of Rhode Island Office of Energy Resources is soliciting a consultant under RFP27007093 to conduct a Quality Assurance Study and Report for the Renewable Energy Growth Program installations from the 2026-2028 program years. The selected consultant will perform on-site assessments by licensed electricians to ensure systems are safe, high quality, and compliant with NEC and state specifications. Key deliverables include a sampling memo for OER approval, standardized inspection reports for installers and homeowners, a customer feedback survey, and a final report presented in person to the DG Board. The initial contract term is three years starting approximately January 1, 2027, with the possibility of two additional 12-month renewals. Award decisions are based on a weighted scoring system of 106 points, requiring a minimum technical score of 55 points to proceed to cost evaluation. Bidders must provide a detailed cost proposal broken down by specific tasks, ranging from small-scale PV inspections to larger wind and hydropower projects. Mandatory requirements include a Supplemental Bidder Attestation regarding conflicts of interest, an ISBE participation plan for MBE, WBE, or Disability Business Enterprises, and professional certifications such as NABCEP. The consultant must also maintain significant insurance coverage, including 2 million dollars in professional liability and 1 million dollars in commercial general liability and automobile liability.
State of Rhode Island

POSTED

2 days ago

DEADLINE

in 22 days
NAICS: 541350
New
International
PARK VIEW HEALTH AND WELLBEING CENTRE BUILDING SUPERVISOR SERVICES
Solicitation # CAV-FTS-64586
The Cardiff and Vale University Health Board is seeking a qualified consultant for the provision of Building Supervisor Services for the Park View Health and Wellbeing Centre in Ely, Cardiff. Under solicitation CAV-FTS-64586, the appointed supervisor will act as the Health Board's independent representative on-site, providing quality assurance, compliance monitoring, and reporting throughout the construction, commissioning, and handover phases. Key responsibilities include monitoring workmanship and materials against contract documents, inspecting high-risk and concealed work, and maintaining a detailed quality observation and non-conformance log. The contract is estimated at 140,000 GBP excluding VAT and is scheduled as a 90-week appointment, with an assumed 12-month defects period. The successful tenderer will be appointed under an NEC PSC contract and must adhere to strict reporting timelines, including issuing site visit reports within one working day and escalating urgent safety concerns within two hours. Evaluation for the award is based on a Most Economically Advantageous Tender approach, weighted 60 percent for commercial cost and 40 percent for technical quality. Mandatory insurance requirements include 5 million GBP for Professional Indemnity and Public Liability, and 10 million GBP for Employers Liability. The submission deadline for this open procedure is November 16, 2026, with a particular suitability noted for small and medium-sized enterprises.
Cardiff and Vale University Health Board

POSTED

2 days ago

DEADLINE

in 19 days
NAICS: 541350
New
SLED
Third Party Elevator Inspections
Solicitation # 2026-23
The City of Newark, New Jersey, through the Division of Central Purchasing, is soliciting proposals under solicitation number 2026-23 for a Private On-Site Inspection Agency to provide third-party elevator subcode enforcement services. The selected contractor must be authorized by the New Jersey Department of Community Affairs and operate in accordance with N.J.A.C. 5:23-4.14 and the NJBIC. The scope of work requires the agency to provide on-call inspectors under the guidance of the City Construction Code Official, with a minimum staffing requirement of one Elevator Sub-Code Official and at least two full-time elevator inspectors assigned to Newark. The agency must maintain an office staffed at least 40 hours per week and conduct monthly performance review meetings with City representatives to monitor service quality and workload. The contract is for an initial term of three years, with the possibility of two additional one-year renewal terms, totaling a maximum of five years. Proposals must be submitted electronically via the OpenGov e-Procurement Portal by November 24, 2026, at 2:00 pm. Submissions must be divided into a separate technical proposal and cost proposal, accompanied by various certifications, including W-9, Federal Debarment, and disclosures regarding Iran and Russia-Belarus activities. Award decisions will be based on the most advantageous offering that best meets the City's needs, with a focus on responsiveness and the standards of responsibility. Failure to provide required information or submitting inadequate pricing may result in a proposal being deemed non-responsive.
Division of Central Purchasing

POSTED

2 days ago

DEADLINE

in 27 days
NAICS: 541350
New
International
Depot Fire Break & Void Detection Surveys
Solicitation # ocds-h6vhtk-079033
Thameslink Southern Great Northern Limited (TSGN) is seeking a contractor to address fire safety non-compliances across several depots. The project focuses on reviewing existing fire prevention measures within ceiling voids, including fire stopping and fire breaks. The primary deliverable is a comprehensive scope of works for roof void fire protection, which must include fire breaks, fire stopping for existing walls, and a detailed review of void protection aligned with the current fire alarm system. The contract is divided into three geographical lots: Lot 1 covers Bedford, Peterborough, Letchworth, and Welwyn; Lot 2 covers Selhurst, Battersea, Hornsey, Streatham Hill, and Cricklewood; and Lot 3 covers Brighton, Bognor Regis, Hove, Littlehampton, and Horsham. The total estimated value of the project is 540,000 GBP including VAT, with individual lot estimates ranging from 168,000 GBP to 204,000 GBP. The estimated period of performance is one year, from April 26, 2027, to April 25, 2028. Award decisions will be based on a competitive flexible procedure, with evaluation weighted at 60 percent for technical quality and 40 percent for the commercial pricing proposal across all lots. The opportunity is open to small and medium-sized enterprises (SME), and all submissions must be made in English via the electronic portal.
Thameslink Southern Great Northern Limited (TSGN)

POSTED

2 days ago

DEADLINE

N/A
NAICS: 541350
New
SLED
27-004 Inspection Services
Solicitation # 27-004
Solicitation 27-004 is a Request for Proposal issued by the City of Commerce, Georgia, for professional Plan Review and Inspection Services. The contract is designed for an initial one-year term with the possibility of annual renewals for up to three years. To be eligible, firms must demonstrate ICC Residential and Commercial Building Inspection certifications across all trades, including plumbing, heating, air, electrical, and mechanical, as well as expertise in inspecting footings, foundations, concrete slabs, and framing, providing proof of such certifications for the last three years. The City will evaluate proposals based on the completeness of the submission, the applicant's understanding of the services, experience and past performance, and cost. Submissions are due by December 1, 2026, and must include two paper copies, an electronic copy, a notarized Contractor Affidavit complying with the Illegal Immigration Reform and Enforcement Act of 2011, a W-9, and a Vendor Master Form. A 5% bid bond is required with the proposal, and the selected vendor must provide a 100% performance bond along with proof of liability and workman's compensation insurance before commencing work. The contract is governed by Georgia state law and incorporates mandatory federal requirements from 2 CFR Part 200 Appendix II for projects funded with State and Local Fiscal Recovery Funds. Proposals must include a Total All-Inclusive Not to Exceed Maximum Price submitted in a separate envelope.
City of Commerce

POSTED

5 days ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

The contract calls for the provision of non-destructive testing and quality inspection services specifically for Tubing Assemblies to ensure full compliance with government standards prior to acceptance. Tasks include performing a range of non-destructive techniques such as X-ray, dye penetrant, and ultrasonic testing to detect any defects or deviations that could compromise structural integrity or performance. The work is critical to validating conformance and must be executed with precision to meet the stringent requirements associated with Department of Defense procurement. All testing and inspection activities are subject to government oversight and must align with applicable technical specifications and quality control protocols. This is a total small business set-aside under the SBA program, meaning only eligible small businesses may compete for this opportunity. The North American Industry Classification System code 541350 identifies the nature of the work as professional, scientific, and technical services related to mechanical testing. The solicitation was posted on July 20, 2026, with a response deadline of August 10, 2026. The contracting authority is the Department of Defense under the office designation W6QK Acc- Dta, and performance locations are not specified, though the work is tied to government acceptance criteria. The contract is structured as a subcontract, indicating it may flow from a prime contractor or be part of a larger procurement framework supporting defense system components.

General Info

Small business set-aside for DoD non-destructive testing of tubing assemblies using X-ray, dye penetrant, and ultrasonic methods.

NAICS

541350 - Building Inspection Services

Place of Performance

MI, USA

Set-Aside

SBA

Documents

This scope was carved out of PANDTA-24-P-0000_008669.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

RFOP BOAST for Tubing Assembly, NON, NSN: 4710-01-574-9065

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc- Dta
ContactsNo contacts available
OfficeN/A
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Perform non-destructive testing (e.g., X-ray, dye penetrant, ultrasonic) and quality inspections to verify conformance of Tubing Assemblies prior to government acceptance.

More opportunities from Department Of Defense → W6QK Acc- Dta

Same awarding agency

NAICS: 334419
New
Federal
Solicitation for Cable Assembly, Special / NSN: 5995-01-659-9699
Solicitation # W912CH-27-Q-A013
The United States Army Contracting Command Detroit Arsenal is soliciting a total small business set-aside for a firm-fixed price contract to procure special cable assemblies, identified by NSN 5995-01-659-9699 and part number 13678655. The requirement consists of an initial quantity of 15 units with a 100 percent option for an additional 15 units. The procurement is governed by NAICS code 335929 and requires adherence to a specific Technical Data Package available via SAM.gov. Due to export controls, bidders must be certified under the United States/Canada Joint Certification Program to access the technical data. The contract includes a First Article Test Report requirement with delivery due 110 days after award, while production quantities are scheduled for 180 days after contract or upon first article approval, whichever is later. Deliveries are FOB Destination, with inspection and acceptance occurring at the origin. Contractors must comply with ISO 9001:2015 quality standards and Military Packaging Level B, including specific special packaging instructions and MIL-STD-129 marking requirements. Award will be based on the lowest evaluated offer or best value, considering technical requirements, responsibility criteria, and pricing for the full option quantity. Proposals must be submitted electronically via PIEE or email to the designated contract specialist by the specified deadline.
Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332994
New
Federal
60 MM Mortar Mount
Solicitation # W912CH-27-R-A026
The United States Army Contracting Command Detroit Arsenal is soliciting a two-year, Firm-Fixed Price requirement contract for the procurement of 60 MM Mortar Mounts, identified by NSN 1010-01-561-9234 and part number 13017350. This procurement is a Small Business Set-Aside under NAICS code 332994. The scope of work includes the production of 118 units for the first year and an option for an additional 118 units in the second year. Key deliverables include the hardware, an Acceptance Inspection Equipment Report, and a First Article Test Report. The delivery schedule is the primary evaluation factor and is considered significantly more important than price, with higher ratings awarded to proposals that can deliver 30 or more days sooner than the solicited schedule. Access to the associated Technical Data Package is restricted to U.S. Government agencies and contractors with a Distribution Code D and requires certification under the United States/Canada Joint Certification Program. Contractors must comply with strict Controlled Unclassified Information guidelines, including mandatory DoD training and the signing of non-disclosure agreements. Packaging and marking must adhere to MIL-STD-2073-1 and MIL-STD-129, with inspection and acceptance of supplies occurring at the point of origin. Invoicing and payment will be processed electronically through the Wide Area Workflow system. Proposals must be submitted via email to the designated Contract Specialist by the specified deadline.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

2 days ago

DEADLINE

in 15 days
View Details
NAICS: 336992
New
Federal
RECHARGE KIT, VALVE 4210-01-483-9758
Solicitation # W912CH27BA014_SourcesSought
The Army Contracting Command Detroit Arsenal is conducting market research through a Sources Sought Notice, solicitation number W912CH27BA014, to identify qualified vendors for the manufacture of Valve Recharge Kits, NSN 4210-01-483-9758, part number 579K4036. These kits are essential for servicing and resetting fire suppression systems within the M1 Abrams Family of Vehicles. This effort is for government planning purposes only and is not a formal solicitation for proposals. The government is seeking information from both small and large businesses under NAICS code 336992 to determine interest, capabilities, and production lead times. Interested respondents must submit a completed market research survey to Contract Specialist Angelo Wilson by November 5, 2026. A critical requirement for accessing the associated Technical Data Package, which is designated as distribution code D, is having a current DD 2345 Military Critical Technical Data Agreement on file with the Defense Logistics Information Service and active registration in the Joint Certification Program. Small businesses must also certify compliance with the nonmanufacturer rule. Responses should include details on quality management systems and production capabilities, with any proprietary information clearly marked as confidential.
Military Armored Vehicle, Tank, and Tank Component Manufacturing

POSTED

2 days ago

DEADLINE

in 8 days
View Details
NAICS: 541715
New
Federal
Sources Sought: Domestically Produced Hand and Measuring Tools (ACC-DTA CSO Amend 40)
Solicitation # W912CH26S0001
The Army Contracting Command – Detroit Arsenal (ACC-DTA) Commercial Solutions Opening (CSO), solicitation W912CH-26-S-0001, serves as a rapid-acquisition gateway to transition cutting-edge commercial technologies into active defense programs. This vehicle supports a diverse customer base, including the Intelligence and Security Command (INSCOM) and six Portfolio Acquisition Executives, focusing on the development, integration, and sustainment of ground vehicle systems to enhance Army modernization and readiness. The CSO utilizes a streamlined, merit-based, multi-phased evaluation process consisting of solution briefs, presentations, and commercial solution proposals. Awards may be issued through 2028 via FAR Part 12 commercial procedures or non-FAR agreements, such as transaction agreements under 10 U.S.C. 4022 and Cooperative Agreements under 31 U.S.C. 6305. The solicitation encompasses various Areas of Interest (AoI) targeting critical capabilities, including the FALCONS prototype for long-range reconnaissance, TIGER Readiness for the Abrams Main Battle Tank engine supply chain, Counter-Unmanned Aircraft Systems (C-UAS) detection, and the Light Tactical Trailer Heavy Chassis (LTT-HC). Funding ceilings for specific prototypes, such as FALCONS, range from 24 million to 30 million dollars depending on the use of government-provided kits. Key requirements include strict adherence to the Buy American Act and Specialty Metals clauses, with a prohibition on reliance on adversarial foreign nations for critical minerals. Technical evaluations focus on mission viability, affordability, and schedule realism, while administrative requirements include SAM registration, a Unique Entity ID, and compliance with NIST SP 800-171 for handling controlled unclassified information.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

2 days ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS