Top

Quality Testing and Compliance Verification (Third-Party Lab Services)

Active

State & Local

Response Deadline08/27/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Nebraska → Lincoln Electric SystemView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

NE, USA

Set-Aside

NONE

Documents

This scope was carved out of 102-26.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Purchase Aluminum Wire

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 12

subcontract

Response DeadlineAug 27

Submission deadline

Response Deadline

08/27/2026, 07:00:00 PM UTCin 14 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyNebraska → Lincoln Electric System

ContactsNo contacts available

OfficeN/A

Organization / Agency

Nebraska → Lincoln Electric System

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Independent laboratory testing of aluminum conductor samples to verify compliance with ASTM B232 and LES performance standards prior to delivery.

Similar Contracts

Same NAICS industry code

NAICS: 541380

New

SLED

Legionella & Pathogen Laboratory Testing

California Department of Veterans Affairs

POSTED

DEADLINE

Quarterly Water Sampling & Field Collection Support

California Department of Veterans Affairs

POSTED

DEADLINE

RFQ #27-08, On-Call Materials and Field Testing Services - Annual Contract

Solicitation # PE-67500-NONST-2027-000000168

Henry County is seeking statements of qualifications to establish a shortlist of pre-qualified firms for an annual contract providing on-call comprehensive materials and field testing services. The selected contractor will be responsible for providing all necessary labor, materials, equipment, and services to meet the requirements of the agreement. Interested firms must submit their qualifications to the Henry County Purchasing Department in McDonough, Georgia, by 3:00 PM local time on September 9, 2026. Submissions cannot be withdrawn for sixty days following the closing date, and the county maintains the right to reject any proposals or waive technicalities.

Henry County Board of Commissioners

POSTED

DEADLINE

Wastewater Collection System Flow Monitoring Services

Solicitation # RFP005-26-27-AMS

The City of Columbia, South Carolina, is seeking proposals for Wastewater Collection System Flow Monitoring Services under solicitation number RFP005-26-27-AMS. This procurement opportunity is managed by the city's procurement department, with Angela M Seymour serving as the primary point of contact for interested parties. The solicitation was posted on August 12, 2026, and requires all responses to be submitted by the deadline of September 3, 2026, at 5:00 PM. All inquiries regarding the solicitation must be submitted through the IonWave platform, while technical issues related to the platform should be directed to the procurement department.

POSTED

DEADLINE

Radioactive Material Notification & Labeling Compliance

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Radioactive Materials Notification and Compliance

FLUID HANDLING DIVISION

POSTED

DEADLINE

Product Verification Testing (PVT) Services

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Hazardous Materials Compliance & Packaging Services

POSTED

DEADLINE

Hazardous Material Labeling and Compliance

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling Services

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

First Article Testing (FAT) Services for Defense Components

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Radioactive Materials Labeling and Documentation

POSTED

DEADLINE

More opportunities from Nebraska → Lincoln Electric System

Same awarding agency

NAICS: NA

New

SLED

Unable to decompose prime contract due to system outage

POSTED

DEADLINE

Purchase Street Light Poles

Solicitation # 103-26

Lincoln Electric System is soliciting formal bids under solicitation 103-26 for the purchase and delivery of fiberglass street light poles. The requirement consists of 93 heavy-duty 20-foot embedded round black poles and 72 heavy-duty 20-foot embedded round gray poles, both featuring 3x3.5 inch tenons and a 19-foot height. All items must be delivered FOB to 2620 Fairfield Street, Lincoln, Nebraska. The bid process is a two-step unsealing, with a clarification deadline of August 19, 2026, and a final submission deadline of August 27, 2026, at 2:00 PM CT. Bidders must submit their proposals electronically via the LES Online Procurement System in .pdf or .zip format, as paper submissions are not accepted. Key contractual requirements include providing a specific delivery timeline, a product guarantee, and indemnification against patent infringement. The award is likely based on a low-price technically acceptable basis, and any price escalation must be clearly detailed in the bid. Compliance with fair employment practices and all applicable laws is mandatory. Payment will be issued to the Accounts Payable office in Lincoln, Nebraska, following successful inspection and acceptance of the goods at the destination.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

Specialty Freight and Reel Transport (Heavy/Over-Dimensional Shipping)

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Aluminum Conductor (ACSR 26/7) Manufacturing and Supply

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

DEADLINE

Purchase Aluminum Wire

Solicitation # 102-26

Lincoln Electric System (LES) is soliciting bids under solicitation number 102-26 for the purchase and delivery of 28,500 feet of ACSR 26/7 aluminum conductor, specifically size 556.5 kcmil with the code name DOVE. The material must comply with ASTM B232 standards and be delivered on six reels, consisting of three reels of 6,000 feet and three reels of 3,500 feet. Physical constraints for the reels include a maximum flange diameter of 72 inches, a maximum width of 54 inches, and a maximum gross weight of 10,000 lbs. All deliveries are to be made to the LES facility located at 9445 Rokeby Rd, Lincoln, NE 68526. Proposals must be submitted electronically via the LES Online Procurement System in a single .pdf or .zip file by August 27, 2026, at 2:00 PM CT. Bidders are required to provide their own delivery dates and specify FOB terms, although the contract indicates that transportation charges are to be paid by the vendor. Payment is set at Net30 and is contingent upon successful inspection and testing at the destination. Evaluation is based on price, with an escalator clause utilized for bid comparisons, and bidders must provide detailed technical specifications and performance guarantees. This is a local SLED procurement and does not follow federal FAR guidelines.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Purchase Swage Tooling

Solicitation # 101-26

Lincoln Electric System is soliciting formal bids under solicitation number 101-26 for the purchase and delivery of a complete swage tooling system. The required equipment includes a battery-powered hydraulic pump compatible with Milwaukee M18 batteries, a 10-foot hydraulic hose with swivel and quick-disconnect fittings, head assemblies with removable dies for specific connectors, an inspection gauge, and carrying cases for all components. The tooling must be capable of performing uniform 360-degree compressions and must meet or exceed national standards including ANSI, NEMA, IEEE, and ASTM. The procurement is managed by the LES Procurement Department, with a bid due date of August 27, 2026, at 2:00 PM CT. All submissions must be uploaded as a single PDF or ZIP file via the LES Online Procurement System. Delivery is required FOB Lincoln, Nebraska, to the LES Operations Center. Payment terms are set at Net30. All inquiries must be submitted through the clarifications tab of the bid portal. Final acceptance of the equipment is contingent upon successful testing and verification of compliance with LES specifications at the destination.

Special Die and Tool, Die Set, Jig, and Fixture Manufacturing

POSTED

DEADLINE

Drainage and Crushed Rock Supply/InstallationThe contract involves the installation of 106 linear feet of 6-inch drainage pipe alongside the placement of 214 tons of 3-inch screened crushed rock to create sub-base and drainage layers, targeting infrastructure improvement related to water management and ground stability. The work is classified under NAICS code 237310, indicating it falls within the sewer and water line and related structures construction category, and is structured as a subcontract opportunity. All materials and labor must meet specified engineering standards to ensure proper functionality and longevity of the drainage system. The solicitation was posted on August 6, 2026, with responses due by August 25, 2026, at 7:00 PM, providing potential contractors approximately three weeks to prepare and submit proposals. The project is managed by Lincoln Electric System in Nebraska, though exact performance location details are not specified, and interested parties must access the full details through the provided UI link to understand scope expectations, technical requirements, and submission protocols.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Precast Fire Wall Procurement and Foundation InstallationThe contract entails the procurement of PCI-certified precast concrete fire wall panels and columns, along with the installation of pier foundations measuring 60 inches in diameter and 27 feet 6 inches in overall length, to provide structural support for a critical infrastructure project. These components must meet stringent industry standards for fire resistance and structural integrity, ensuring compliance with safety and performance requirements. The work involves precise manufacturing, transportation, and on-site installation of the precast elements, with the foundation work requiring specialized equipment and techniques to ensure load-bearing capacity and long-term durability. This subcontract is issued by the Lincoln Electric System in Nebraska, with a posted date of August 6, 2026, and a response deadline of August 25, 2026. The NAICS code 327330 confirms the scope relates to precast concrete product manufacturing. The place of performance and detailed contact information are not specified, but bidders are directed to the provided online portal for full details and submission guidelines. All proposals must demonstrate capability in handling certified precast systems and executing complex foundation installations under rigorous quality control standards.

POSTED

DEADLINE

Transformer Pad and Oil Containment Concrete Formwork and PouringThe contract involves the construction of a transformer pad and oil containment area with full compliance to HDR specifications, encompassing all aspects of concrete work including formwork design and installation, reinforcement placement, pouring, jointing, and proper curing procedures. The scope is focused on delivering a durable, code-compliant concrete structure designed to safely support electrical infrastructure and contain potential oil leaks, requiring precision in material handling and construction techniques to meet engineering standards. This subcontract is issued by Lincoln Electric System in Nebraska with a posting date of August 6, 2026, and a mandatory response deadline of August 25, 2026. The work falls under NAICS code 238110, indicating it is classified as concrete work for construction projects. While specific location details and point of contact information are not provided, the performance location is within Nebraska and bidders must submit proposals through the designated online portal before the stated deadline to be considered for award.

Poured Concrete Foundation and Structure Contractors

POSTED

DEADLINE

Auger Cast Pile Installation for Transformer PadThe contract mandates the installation of 18-inch diameter Continuous Flight Auger (CFA) piles to support the transformer pad foundation, encompassing all phases of the work including drilling, grouting, reinforcement placement, and rigorous quality control measures aligned with specified engineering standards. The work must be executed with precision to ensure structural integrity and long-term stability of the foundation, adhering strictly to technical requirements and industry best practices for deep foundation systems. The project is listed under NAICS code 238910 for specialized trade contractors and is configured as a subcontract opportunity posted by Lincoln Electric System in Nebraska, with a response deadline of August 25, 2026. No specific location or point of contact is provided in the data, but all work is expected to occur at the facility site where the transformer pad is to be constructed. Compliance with all engineering specifications and quality assurance protocols is mandatory, and bidders must demonstrate capability in performing CFA pile installations to meet the project’s structural and safety demands.

Site Preparation Contractors

POSTED

DEADLINE

Site Demolition and Existing Foundation RemovalThe contract entails the complete removal of existing concrete foundations and all associated site preparation activities at the 30th & A Substation, requiring full demolition, debris removal, and thorough site clearing to ensure the area is properly prepared for future work. All phases of the project must be executed in compliance with safety and environmental standards, with the contractor responsible for managing and disposing of debris appropriately. The work is classified under NAICS code 238990 and is structured as a subcontract, with bids due by August 25, 2026, at 7:00 PM. The project is managed by Lincoln Electric System in Nebraska, though specific location details and point of contact information are not provided in the posting. Interested parties must review the full details via the provided online link to ensure full compliance with all requirements and expectations.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Concrete Foundation S-26-20

Solicitation # 100-26

The Lincoln Electric System is soliciting bids for the Concrete Foundation S-26-20 project at the 30th & A Substation in Lincoln, Nebraska, identified as Bid #100-26, with a submission deadline of August 25, 2026 at 2:00 PM CST. This procurement, conducted under a two-step unsealing process, requires all bids to be submitted exclusively through the LES Online Procurement System, with no paper copies accepted. The scope encompasses the installation of concrete foundations for the transformer replacement, including mobilization, demolition, auger-cast pile installation, oil containment structures, drainage piping, crushed rock placement, and precast fire wall pier foundations. Specific work must occur during a scheduled substation outage, with a preliminary start date of October 12, 2026, and bidders are required to propose their own completion date. All bids must adhere strictly to the incorporated Contract Documents, which include Instructions to Bidders, Performance and Labor and Material Payment Bonds, General and Special Conditions, Technical Specifications, Drawings, and all written modifications. Contractors must comply with stringent technical, legal, and administrative requirements. Concrete work must meet ACI 301 and applicable building codes, with material specifications governed by ASTM standards for reinforcing and aggregates. Reinforcing steel must be shipped with permanently attached, non-removable plastic or metal tags matching Shop Drawing mark numbers, and mechanical splices require protective plastic caps. Testing and inspection are overseen by an independent agency hired by the Owner, with compressive strength criteria requiring average three-test results to meet or exceed the 28-day design strength and no individual test falling more than 500 psi below. Core testing must average at least 85% of specified strength with no single core below 75%. Bidders must conduct an onsite inspection and are held fully responsible for understanding site conditions. Key personnel, including drilled pier installers and foremen, must have five years’ experience on similar projects, while precast engineers must be licensed Nebraska professionals. Payment will be based on actual unit quantities using unit prices listed in the proposal sheet, though pricing details are currently unspecified. Bonds, required in an amount not less than the contract price, must be submitted with the signed contract and remain in force for at least one year after final payment. The contract is subject to federal and Nebraska labor laws, including non-discrimination provisions under the Nebraska Fair Employment Practice Act and the Civil Rights Act of

Poured Concrete Foundation and Structure Contractors

POSTED

7 days ago

DEADLINE

in 12 days

View Details