Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 30 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Reliability and Environmental Testing (Simulated Space)

Active

Federal

Response Deadline10/16/2026, 10:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for the Naval Research Laboratory under the Department of Defense focuses on reliability and environmental testing for semiconductor devices used in space environment projects. The contractor is responsible for measuring performance parameters under simulated operational space conditions, analyzing temperature effects, and identifying specific failure modes using radiation sources and thermal vacuum chambers. The scope of work involves performing detailed failure analysis and delivering comprehensive reliability reports for prime contractors. This project is based in Washington, DC, with a response deadline of October 16, 2026, and falls under NAICS code 541380.

General Info

DoD subcontract for semiconductor reliability and environmental testing for space projects in DC.

Agency

Department Of Defense → Naval Research LaboratoryView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Washington, DC, 20375, USA

Set-Aside

NONE

Documents

This scope was carved out of N0017326R0008.

The full solicitation package (10 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Optoelectronics, Power Electronics and Radiation Effects

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 16

subcontract

Response DeadlineOct 16

Submission deadline

Response Deadline

10/16/2026, 10:00:00 PM UTCin 29 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Naval Research Laboratory

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Naval Research Laboratory

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs reliability testing and failure analysis of semiconductor devices for prime contractors on Naval Research Laboratory (NRL) space environment projects. Measures performance parameters under simulated operational space conditions, analyzes temperature effects, and identifies failure modes. Utilizes thermal vacuum chambers and radiation sources. Delivers reliability and failure analysis reports.

Similar Contracts

Same NAICS industry code

First Article Test (FAT) Services

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

Product Verification Testing (PVT) and Quality InspectionThis subcontract involves providing independent testing and verification services for prime contractors on DLA supply contracts, specifically focusing on Product Verification Testing (PVT). The work is governed by Procurement Note E05 and Reference QAP 19200 13033856, requiring the use of metrology and inspection equipment such as CMMs and calipers, as well as destructive testing facilities, to verify dimensions according to Drawing 19200 13033856. The final deliverables include comprehensive test reports and verified PVT samples. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. Classified under NAICS code 541380, the opportunity was posted on September 17, 2026, with a response deadline of September 28, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 15 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract for the Department of Defense ASC Commodities Division involves providing technical testing and validation services for prime contractors on DLA Aviation projects. The scope of work focuses on executing First Article Testing and Production Lot Testing to ensure aerospace components meet all technical and quality specifications using specialized facilities capable of measuring precise tolerances. All activities are performed under the oversight of a Government Quality Assurance Representative, with the final delivery consisting of comprehensive test reports and validation data. The project is categorized under NAICS code 541380 and is to be performed in Jacksonville, Florida. Interested parties must respond by September 25, 2026, following the posting date of September 17, 2026.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

First Article Test (FAT) for Gearbox Brake BandsThis subcontract involves performing First Article Testing for gearbox brake bands to support prime contractors on Department of Defense supply contracts. The selected provider will validate manufacturing by verifying dimensions, material properties, and functional performance of the initial unit against the Technical Data Package using precision measurement tools and testing rigs. The final deliverable for this effort is a comprehensive First Article Test Report. The project is managed by the ASC Supplier OE and AF Div within the Department of Defense and will be performed at Hill AFB. Eligible candidates must possess a certified quality lab or a certified quality control department to meet the technical requirements. The solicitation was posted on September 17, 2026, with a response deadline of September 25, 2026, under NAICS code 541380.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

Hardware Quality Assurance & Inspection

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Critical Application Item Certification/Testing

Defense Logistics Agency

POSTED

about 15 hours ago

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract with the Department of Defense ASC Commodities Division involves performing Production Lot Testing and Quality Certification for prime contractors delivering DLA Aviation supply contracts. The primary objective is to verify that manufactured blind rivets adhere to technical NSN specifications by utilizing materials testing laboratory equipment to validate material composition, dimensions, and strength. All activities must comply with DLA quality management standards, culminating in the delivery of a completed and signed Production Lot Test report. The project is categorized under NAICS code 541380 and will be performed in San Diego, California. Interested parties must respond by September 25, 2026, following the posting date of September 17, 2026.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Shock Extension Testing and Reporting

LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Production Lot Testing and CertificationThis subcontract for Production Lot Testing and Certification supports the Department of Defense, specifically the Land Supplier Operations Vehicle Support agency. The contractor is responsible for performing approved testing for prime contractors delivering DLA Land and Maritime supply contracts to validate the quality of NSN 2590016834807. Key duties include executing the Production Lot Test plan, measuring results against specified tolerances, and coordinating directly with the Quality Assurance Representative. The contractor must generate essential documentation, including DD Form 1222 and DD Form 250/iRAPT receiving reports, and deliver the final signed PLT report and certification documents. The work is performed at Fort Bliss, Texas, under NAICS code 541380. The solicitation was posted on September 17, 2026, with a response deadline of September 28, 2026.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 15 hours ago

DEADLINE

Production Lot Testing and Reporting ServicesThis subcontract for Production Lot Testing and Reporting Services supports the Department of Defense through the ASC Commodities Division. The selected provider will perform quality assurance testing for prime contractors on DLA Aviation supply contracts, utilizing specialized facilities to conduct Production Lot Testing on supplied hardware. The contractor is responsible for delivering formal test reports that adhere to data item description DI-NDTI-80809B. Performance will take place at Tinker AFB, and the opportunity falls under NAICS code 541380. The response deadline for this requirement is September 25, 2026.

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

Electrical Assembly Testing and Quality Validation Services

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

First Article Testing and Validation

ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → Naval Research Laboratory

Same awarding agency

Microsoft Exchange Server - Enterprise License

Solicitation # N0017326Q5635

The Naval Research Laboratory is issuing a Request for Quotations (RFQ) for a total small business set-aside to procure Microsoft Exchange Server licenses and software assurance. This firm-fixed-price procurement, categorized under NAICS code 541519, specifically requires Microsoft Exchange Server Enterprise Licenses and Standard 1-User Client Access Licenses (CALs). The requirement includes three-year software assurance to ensure all software updates are provided for the duration of the term. This solicitation supersedes previous RFQs that were canceled due to updated part numbers. The procurement is strictly a brand-name requirement, and all items must be new equipment; remanufactured or gray market items are prohibited. Vendors must be an Original Equipment Manufacturer (OEM), an authorized dealer, distributor, or reseller capable of maintaining OEM warranty and service standards, and they must provide manufacturer documentation verifying their authorized status. The government will evaluate offers using the Lowest Price Technically Acceptable method, ranking quotes from lowest to highest price and conducting technical evaluations to ensure compliance with specifications. Deliveries are to be made to the Naval Research Laboratory in Monterey, California, with FOB Destination being the preferred method. All supplies must be received in full working order to be accepted.

Other Computer Related Services

POSTED

about 20 hours ago

DEADLINE

in about 8 hours

R&D Semiconductor Material SupplyThis subcontract, titled R&D Semiconductor Material Supply, supports the Naval Research Laboratory within the Department of Defense by providing specialized materials for growth and fabrication projects. The scope of work involves the procurement and delivery of high-purity semiconductor wafers, precursors, and specialized chemicals, with a specific focus on wide bandgap semiconductor research. All deliverables must adhere to strict quality and safety standards, including ASTM-D-3951-18 for packaging and FED STD 313-F for the handling of hazardous materials. The contract is categorized under NAICS code 334413 and is to be performed in Washington, DC. Interested parties must respond by October 16, 2026, following the posting date of September 16, 2026. The primary objective is the consistent supply of raw materials and substrates necessary for advanced research and development initiatives conducted by prime contractors.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

TS/SCI Semiconductor Modeling and DesignThis subcontract for the Naval Research Laboratory involves performing theoretical research and numerical modeling of electronic and atomic structures to support classified projects. The scope of work focuses on developing physics-based numerical models for power electronic, microwave, and optoelectronic devices utilizing high-performance computing. The project requires the delivery of design models and classified technical reports. Due to the nature of the work, personnel must possess a TS/SCI clearance to operate within secure compartmented information facilities in Washington. The response deadline for this opportunity is October 16, 2026.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Structural and Electrical Characterization ServicesThis subcontract for Structural and Electrical Characterization Services supports prime contractors on projects for the Naval Research Laboratory within the Department of Defense. The scope of work involves performing comprehensive atomic, crystalline, and electrical analysis of semiconductor materials. Technical requirements include the use of optical microscopy, XRD, electron microscopy, I-V/C-V measurements, and Hall effect analysis, as well as utilizing stylus profilometry and network and spectrum analyzers for microwave characterization. The selected provider will be responsible for delivering detailed characterization reports and data. This opportunity is categorized under NAICS code 541380 and is based in Washington, DC. The response deadline for this requirement is October 16, 2026.

Testing Laboratories and Services

POSTED

DEADLINE

Semiconductor Fabrication and Processing ServicesThis subcontract for Semiconductor Fabrication and Processing Services supports Naval Research Laboratory R&D projects by providing physical fabrication and processing of semiconductor devices for prime contractors. The scope of work includes removing residual oxides through wet chemistry and plasma processes, performing metal deposition using shadow and lithographic masks, and fabricating diodes, FETs, solar cells, and optical detectors. The project requires the use of non-radiative deposition equipment and plasma processing, with all work adhering to FED STD 313-F and ASTM-D-3951-18 standards. The contract is managed by the Department of Defense for the Naval Research Laboratory, with performance taking place in Washington, DC. The primary deliverables are fabricated integrated circuits and devices. Interested parties must respond by October 16, 2026, under NAICS code 334413.

Semiconductor and Related Device Manufacturing

POSTED

DEADLINE

Advanced GNSS Simulator

Solicitation # N0017326RFIMA01

This notice is a Sources Sought/Request for Information issued by the Naval Research Laboratory to identify industry sources capable of providing a high-precision, multi-channel Advanced Global Navigation Satellite System (GNSS) Simulator suite. The requirement consists of two discrete simulation units designed to support Position, Navigation, and Timing research. The first unit must support a wide array of constellations including GPS, GLONASS, BeiDou, Galileo, NavIC, QZSS, and specialized capabilities for Low Earth Orbit Alternative Navigation and lunar S-band PNT. The second unit focuses on GPS simulation with specific capabilities for four-element Controlled Reception Pattern Antenna testing to emulate phase-coherent RF wavefronts. Both units must adhere to strict physical and electrical specifications, including 19-inch rack mounting, specific RF connector types, and TPM 2.0 security compliance. Interested parties must submit a capability statement including technical specifications, commerciality data, and past performance. This announcement is for informational and planning purposes only and does not constitute a formal request for quotes or a guarantee that an award will be made.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

Optoelectronics, Power Electronics and Radiation Effects

Solicitation # N0017326R0008

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Underwater modems

Solicitation # N0017326Q0026

The Naval Research Laboratory intends to award a sole source purchase order to delResearch of Sandwich, MA, for the procurement of specialized underwater modems. This action is being conducted under solicitation number N00173-26-Q-0026 using Simplified Acquisition Procedures, as the purchase does not exceed the $250,000 simplified acquisition threshold. The requirement is classified under NAICS code 334290 and Product Service Code 5845. While this is not a request for competitive proposals, interested parties may submit evidence of their capability to respond to the requirement to determine if competitive procurement would be advantageous to the government. The notice was posted on September 16, 2026, with a response deadline of September 18, 2026. All inquiries and correspondence should be directed to the primary point of contact, Natalie Waugh.

Other Communications Equipment Manufacturing

POSTED

DEADLINE

in about 2 hours

Elionix Boden 100 Electron Beam Writing System Service Contract

Solicitation # N0017326NODS01

The Naval Research Laboratory (NRL-DC) Institute of Nanoscience intends to award a sole source, firm fixed price contract to SEMTECH Solutions, Inc. to maintain the Elionix Boden-100 electron-beam writing system, specifically serial number H50072. The primary objective is to ensure full operability and minimize downtime for NRL researchers. The contract spans a total period of performance of five years, consisting of one base year and four option years. The vendor is required to provide qualified service engineers who must pass an abbreviated background check via form SECNAV 5512/1. Key service requirements include unlimited phone support and on-site emergency visits during standard business hours, with an average on-site response time of three work days. The contract covers all labor, travel expenses, and the provision of Elionix parts and consumables at no additional cost, excluding damages from misuse or natural disasters. Annual deliverables include the replacement of the thermal field emission filament source and aperture component, electron beam column alignment, and field stitch tests to verify system specifications. While third-party components are not formally covered, the vendor is expected to use best efforts to maintain their functionality.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

in about 11 hours

Azimuth and Elevation Terminal Gearbox Inspection ServicesThis subcontract for the Naval Research Laboratory involves the disassembly and detailed inspection of specialized terminal gearboxes for Navy projects in Washington, DC. The scope of work requires the processing of two Azimuth and two Elevation gearboxes, specifically focusing on internal components for part number NSTN 7540-01-152-8067 to evaluate wear and operational integrity. The contractor must utilize precision measurement tools and heavy industrial gearbox handling facilities to complete the task. The final deliverable consists of comprehensive disassembly and inspection reports for all four gearboxes. This effort falls under NAICS code 811310 and is managed by the Department of Defense.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 3 hours

GEARBOX EVALUATION

Solicitation # N0017326-Q-5533

The Naval Research Laboratory intends to award a firm-fixed price purchase order to Machinists, Inc. on a sole source basis for the disassembly and inspection of four heavy terminal gearboxes. The scope of work specifically includes two Azimuth Terminal Gearboxes and two Elevation Terminal Gearboxes, identified by NSTN 7540-01-152-8067. This procurement is being conducted under Simplified Acquisition Procedures in accordance with FAR Part 13.106-1(b) for purchases not exceeding the simplified acquisition threshold of 350,000 dollars. The requirement is classified under NAICS code 332999 with a size standard of 750 million and Product Service Code H329. While this is a notice of intent and not a request for proposals, interested parties may identify their capabilities within three calendar days of publication to demonstrate that competition would be advantageous to the government. The primary point of contact for this action is Erik Wells. Performance is expected to take place in Washington, District of Columbia.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

in about 3 hours

Supply of TrueWave®-XL Ocean Single Mode FiberThis subcontract involves the supply of 200 kilometers of TrueWave-XL Ocean Single Mode uncoloured fiber for prime contractors supporting Naval Research Laboratory projects. The materials must be new, non-remanufactured, and sourced from non-gray-market channels. To ensure warranty validity, the provider must be an Original Equipment Manufacturer, authorized dealer, distributor, or reseller and provide the necessary manufacturer documentation. The contract is managed by the Department of Defense for the Naval Research Laboratory under NAICS code 335921. The required fiber is to be delivered to Washington, DC. The solicitation was posted on September 14, 2026, with a response deadline of September 18, 2026.

Fiber Optic Cable Manufacturing

POSTED

DEADLINE

in about 8 hours

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS