This Government Contract opportunity from Government of Canada was posted on April 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Repair and Overhaul of Submarine Safety-Critical Valves

Closed

International

Submission Closed06/16/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Equipment Upkeep, Repair & Replacement at Corpus Christi State Supported Living Center (CCSSLC)

Solicitation # HHS0017404V2

The Texas Health and Human Services Commission is seeking competitive bids to establish a contract for equipment upkeep, repair, and replacement at the Corpus Christi State Supported Living Center, identified by solicitation number HHS0017404V2. The contract aims to ensure continued operational integrity of facility equipment through routine maintenance, timely repairs, and necessary replacements, with an anticipated start date of September 1, 2026. Bidders must submit responses by August 25, 2026, at 10:30 a.m. Central Time, and all communications and official updates will be posted via the Texas SmartBuy portal. An optional on-site visit is scheduled for August 7, 2026, at 10:30 a.m. at 902 Airport Rd, Corpus Christi, TX 78405, where bidders can review requirements and tour the facility, though attendance is not mandatory and will not affect bid eligibility. Bidders must notify Richard Castaneda or Debbie Salinas if planning to attend the visit. All questions and clarifications must be submitted by August 12, 2026, at 5:00 p.m. Central Time, with official responses provided via addendum posted on the Electronic State Business Daily no later than August 17, 2026. The solicitation is managed by the Health and Human Services Commission, with Isaiah Wilczynski listed as the primary point of contact for procurement inquiries. The contract type is a standard solicitation without a specific set-aside designation, and performance will occur exclusively at the Corpus Christi facility in Texas. Bidders are expected to understand the scope of work through the issued documentation, with the expectation that all services will support the long-term functionality and safety of equipment critical to resident care and facility operations.

Health and Human Services Commission

POSTED

DEADLINE

Warranty and Post-Delivery Support ServicesThe contract requires the provision of warranty-period repair, replacement, technical support, and field service for an electric bone drill, all in strict accordance with the manufacturer’s warranty terms. Services must be delivered promptly and effectively to ensure continued operational reliability of the device, with a focus on minimal downtime and full compliance with established technical and safety standards. All support activities, including diagnostics, parts replacement, and on-site field service, are to be performed in accordance with the manufacturer’s specifications and within the defined warranty period. This is a small business set-aside subcontract under NAICS code 811310, assigned to the Department of Veterans Affairs through the 262-NETWORK Contract Office 22. The performance location is specified as San Diego, CA, with a zip code of 92161. The solicitation was posted on August 4, 2026, and responses are due by August 12, 2026. Only entities qualifying as small businesses under SBA guidelines are eligible to bid, and the contract is structured to prioritize local or regional service providers capable of meeting the technical and logistical demands of supporting medical equipment in a federal healthcare environment.

262-NETWORK Contract Office 22 (36C262)

POSTED

DEADLINE

Preventative Maintenance of T2100 Treadmill ST for Cardiac Stress TestingThe contract requires timely execution of comprehensive preventative maintenance on T2100 Treadmill ST units utilized in cardiac stress testing environments, encompassing mechanical and electrical inspections, precision calibration, safety testing, and software diagnostics to ensure operational integrity and patient safety. All work must adhere to established clinical and equipment standards to maintain the reliability of these critical medical devices used in diagnostic procedures. The contract is designated as a subcontract under NAICS code 811310 and is managed by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7, with a strict response deadline of August 5, 2026, at 4:00 PM. The scope demands specialized technical expertise and compliance with medical equipment maintenance protocols, though specific location details and point of contact information are not provided. All activities are expected to be performed with precision to support the continuous functionality of treadmills integral to cardiac stress testing workflows.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

Post-Delivery Technical Support and Maintenance ServicesThe contract covers ongoing maintenance, calibration, and repair services for the Steris AMSCO 600LS sterilization unit located at the Boise VA Medical Center, ensuring continuous operational reliability of this critical healthcare equipment. Services are required to be performed in accordance with manufacturer specifications and industry standards to maintain compliance with safety and sterilization protocols essential for patient care. The work is classified under NAICS code 811310, indicating it is a technical maintenance and repair service, and is structured as a subcontract under the Department of Veterans Affairs through Rpo East. The solicitation was posted on August 4, 2026, with a response deadline of August 7, 2026, indicating a short turnaround for proposers to submit qualifications and service plans. The place of performance is tied directly to the Boise VA Medical Center, requiring on-site presence and rapid response capabilities for emergency repairs. The contract does not specify a set-aside status or point of contact, and no detailed funding or performance metrics are included in the provided data, but the nature of the equipment necessitates qualified technicians with experience in high-level medical sterilization systems.

POSTED

DEADLINE

Post-Delivery Support and Maintenance Services

255-NETWORK Contract Office 15 (36C255)

POSTED

DEADLINE

Notice of Intent to Sole Source: Transition to Wired RaycoWylie LMI Configuration - Craft Portal Cranes

Solicitation # LMI_Sources_Sought

The U.S. Navy, through NAVFACSYSCOM Atlantic, has issued a notice of intent to sole source the transition to the Wired RaycoWylie LMI configuration for Craft Portal Cranes, with the solicitation number LMI_Sources_Sought. This action is aimed at securing specialized equipment modifications and integration services that require exclusive technical expertise, with no competitive bids anticipated under current conditions. The opportunity is open for responses until August 11, 2026, at 8:00 PM Eastern Time, with interested parties encouraged to submit feedback prior to the deadline to ensure all relevant capabilities are considered for this non-competitive procurement. The work will be performed at a location in Virginia, specifically designated by the address 64304, while the office overseeing the procurement is located in Norfolk, Virginia, within the Department of Defense. Lisa Sumpter serves as the primary point of contact for this solicitation and can be reached via email at lisa.a.sumpter.civ@us.navy.mil. The contract will be managed under the agency's authority, and the place of performance is situated in Virginia within the same jurisdiction as the procuring office. As no NAICS code or set-aside classification has been provided, the procurement is being treated as a standard government acquisition under the Office’s direct control, with no indication of small business or other socioeconomic preferences. All information and correspondence must be directed to the designated point of contact, and further details can be accessed through the provided SAM.gov link.

Navfacsyscom Atlantic

POSTED

DEADLINE

Autonomous Mower Maintenance Service

Solicitation # FA4690SS01

The U.S. Department of Defense, through the 28th Contracting Squadron at Ellsworth Air Force Base in South Dakota, is seeking information on capable providers to perform maintenance services for Renubot Autonomous Mowers in accordance with the attached Performance Work Statement. This request targets vendors who can deliver compatible maintenance solutions aligned with Renubot software systems and is issued as a Small Business Set Aside, meaning only small businesses are eligible to respond. The solicitation, identified as FA4690SS01, is strictly for market research and does not constitute a request for proposals or an invitation to submit offers. Interested parties must submit responses by August 7, 2026, to indicate their ability to meet the specified service requirements. All work is to be performed at Ellsworth AFB with a ZIP code of 57706, and inquiries should be directed to Aaron Fox-Snider or Martelangelo Surop through the provided contact details.

POSTED

DEADLINE

Repair of Kell-Strom T-400 Riveter

Solicitation # N68520-26-SIMACQ-JC00000-0250

The Navy’s Naval Air Systems Command is seeking to sole-source the repair of a legacy T-400 riveter, asset number 65923043611, to Kell-Strom Tool Co. as the only known source capable of performing the complex, iterative repair process required. This unit demands a specialized troubleshooting methodology where faults are only revealed after prior issues are resolved, necessitating repeated test-and-repair cycles that typically involve custom fabrication or replacement of nearly all internal components to restore proper clamping, alignment, and riveting capabilities. Kell-Strom’s unique access to OEM-licensed technical data, proprietary tooling, and specialized test facilities makes it the only responsible contractor capable of meeting the demanding technical and timeline requirements. The work includes initial diagnostic inspection, ongoing serial repair cycles, component fabrication or procurement, and final calibration to meet original equipment manufacturer specifications. Deliverables include a fully restored and tested riveter, a detailed repair and fabrication summary documenting all faults and replacement parts, and a certified test report verifying compliance with P&WC OEM safety, precision, and performance standards. The solicitation, issued under number N68520-26-SIMACQ-JC00000-0250 with a response deadline of August 19, 2026, will be evaluated based on technical capability, price, and past performance. The place of performance is Cherry Point, North Carolina, and the contract falls under NAICS code 811310 with no set-aside designation. Primary point of contact is Daniel Collins of the Department of Defense, based at Patuxent River, Maryland.

Naval Air Systems Command

POSTED

DEADLINE

Airfield Vehicle Gates Maintenance and Repair Services

Solicitation # FA480026Q0087

The contract solicitation FA480026Q0087 is a Small Business Set Aside under NAICS code 811310 for comprehensive airfield vehicle gates maintenance and repair services at Joint Base Langley-Eustis and Langley Air Force Base in Virginia. The contractor is responsible for supplying all labor, tools, equipment, supplies, and management necessary to perform preventative maintenance, emergency repairs, and initial comprehensive repairs on eight designated slide gates, ensuring 100% operational readiness at all times. Services are to be performed three times annually during the base year and four times annually during each option year, with 24/7 emergency response capability. The contract is firm fixed price and includes multiple option years extending through August 2031, with deliveries and performance centered at Langley Air Force Base. The Performance Work Statement, Wage Determination, and detailed Quality Control Plan requirements are integral to execution, and all work must comply with strict government specifications requiring zero-error reporting and full compliance with the PWS. Proposals must be submitted in three structured volumes—Price, Technical, and Past Performance—with strict page limits of 18, 30, and 8 pages respectively, formatted in Times New Roman 12-point font, single-spaced, with one-inch margins. Technical acceptability hinges on three sub-factors: personnel holding a Certified Gate Automation Technician credential, demonstrated capability to perform all PWS requirements, submission of a draft Quality Control Plan, and a 60-day plan for initial repairs. Past performance is evaluated as acceptable or unacceptable, with an unacceptable rating disqualifying the offeror. Price is evaluated for completeness, realism, and reasonableness, and the award will be made through a trade-off process that considers all three factors equally, not as a lowest price technically acceptable procurement. Contractors must comply with stringent security and personnel requirements, including Tier 1 background investigations, CAC issuance protocols, and adherence to DoD and Air Force security standards. Key personnel must be identified in writing, carry visible ID badges, and maintain contractor-marked communications. Access to the installation is tightly controlled, with all personnel requiring formal requests, identification badges, and vehicle passes, which must be returned upon departure or contract termination. Invoicing is exclusively through WAWF, and compliance with numerous FAR and DFARS clauses—ranging from whistleblower protections and cybersecurity requirements to prohibitions on hexavalent chromium and procurement from restricted regions—is mandatory. All submissions must be sent electronically to the

POSTED

DEADLINE

Vertical Reciprocating Conveyor (VRC) Repair

Solicitation # N32253-26-Q-0070

The Pearl Harbor Naval Shipyard & IMF is initiating a sole-source, firm-fixed-price contract under the Revolutionary FAR Overhaul to secure commercial structural repairs and hardware replacement for a Vertical Reciprocating Conveyor located on its Dry Dock. The procurement is restricted to Ducworks Inc., the original equipment manufacturer, as the Naval Sea Systems Command has confirmed that only Ducworks possesses the proprietary engineering data and specialized drawings necessary to perform the work, and no third parties are authorized or licensed to access this information. This action is justified under RFO 12.201-1 and publicized in compliance with RFO 12.202(a) and RFO 5.101(a), ensuring adherence to simplified procedures for commercial services. The contract will be issued under solicitation number N32253-26-Q-0070 with a response deadline of August 6, 2026, at 12:30 AM HST. While the intent is to award without competition, any responsible source may submit a capability statement or proposal prior to the deadline to demonstrate technical capability and access to the required proprietary information. All submissions must be sent electronically to Colby Teruya and Lyndon Paloma at the designated Navy email addresses. The Government retains full discretion to determine whether competition is warranted based on responses received.

Pearl Harbor Naval Shipyard IMF

POSTED

DEADLINE

AIRFIELD LEAKING TRANSFORMER

Solicitation # 31125260000817

The contract requires the comprehensive removal and replacement of existing airfield lighting transformers at U.S. Coast Guard Base Cape Cod on Joint Base Cape Cod in Buzzards Bay, Massachusetts, with new units meeting precise technical specifications. The scope covers three primary transformers: two single-phase 37.5 KVA units from McGraw Edison—Transformer 413 near Building 614 and Runway 23, and Transformer 523 near Building 614 and Runway 14—and one three-phase 1500/1680 KVA unit from ABB, which was previously misidentified in the Statement of Work as Transformer 232177 but must now be replaced according to the corrected description: Transformer 138613, located adjacent to Building 3181 apron, with a 1000/1120 KVA rating, 4160GRDy/2400 high voltage, 480Y/277 low voltage, and 329 gallons of mineral oil. The contractor is responsible for verifying all existing transformer details, securing power, removing and disposing of old units at their own expense off-base, installing new transformers per manufacturer guidelines, and restoring full operational functionality with testing. Special attention is required for the ABB transformer regarding potential oil leaks, including thorough investigation and submission of replacement or repair feasibility analysis. An optional fourth transformer, a 15 KVA single-phase unit from Southeastern Transformer Co near Building 195 and Runway 5, is available for separate bid consideration. The contract imposes strict performance, safety, and compliance obligations. All work must be completed within 45 calendar days of the Notice to Proceed, with equipment delivered FOB destination. Personnel must be fully qualified, with skilled labor and on-site supervision that can read, write, and speak English, and who are authorized to approve minor changes under $2,000. Daily logs must be submitted weekly to the Contracting Officer’s Representative (COR), who also conducts inspections and final acceptance. The contractor must comply with NFPA 70, FAA regulations, OSHA standards, Joint Base Cape Cod fire and safety protocols, including mandatory hot work permits for welding or burning. Environmental and hazardous material rules apply: all displaced materials require proper documentation via bill of lading, landfill receipts, and recycler permits, and any hazardous substances used or encountered must be reported immediately to the COR with

POSTED

DEADLINE

Water Blast System Service, Repair, & Training

Solicitation # W911N2-26-Q-A011

The contract, identified as W911N2-26-Q-A011, is a sole-source, indefinite-delivery/indefinite-quantity (IDIQ) firm-fixed-price agreement for annual preventive maintenance, repair, and training services on water blast systems at Letterkenny Army Depot in Chambersburg, Pennsylvania. The base performance period runs from August 24, 2026, to August 23, 2027, with four additional one-year option periods extending through August 23, 2031, for a potential total contract value between $20,000 and $250,000. Services encompass comprehensive evaluation, maintenance, and restoration of water blast systems, pressure pots, handheld guns, and recirculation systems to 100% operational status, including the training of depot technicians on safety, operation, and certification. All work is governed by the Performance Work Statement and must comply with OSHA, NFPA 70, ASME B31.3, NEMA 250, and LEAD Regulation 385-1 standards, with 100% Acceptable Quality Level required for deliverables. The contractor must be registered in SAM.gov and must provide all labor, tools, materials, and travel expenses under a firm-fixed-price structure without discussions, indicating a Lowest Price Technically Acceptable award approach. Performance is restricted to standard work hours on weekdays, excluding federal holidays, and requires pre-visit coordination with government representatives. All personnel must undergo background checks, complete AT Level I, iWATCH, and OPSEC training within 30 days of assignment, and adhere to strict physical security and hazardous material handling protocols with full compliance to GHS and HazCom labeling. Payment will be processed via Wide Area WorkFlow using Electronic Funds Transfer through the Defense Finance and Accounting Service, and the Contracting Officer’s Representative and Technical Point of Contact will oversee inspection, acceptance, and compliance with the Quality Assurance Surveillance Plan. A Contract Manager must be designated and approved by the government, and any organizational conflicts of interest must be disclosed and mitigated immediately. The contract includes no set-aside provisions, and while socioeconomic categorization and size status are solicited, no offeror responses have been documented. The contract’s unique requirements also mandate strict environmental compliance, immediate reporting of incidents, certified equipment inspections, and adherence to DoD-access policies for unbadged personnel.

W6QK Lad Contr Office

POSTED

about 20 hours ago

DEADLINE

in 7 days

AI Contract Overview

The contract involves the comprehensive refurbishment, dimensional inspection, material testing, and recertification of used submarine valves to meet original military specifications, ensuring they are restored to full operational capability and safety standards. All work must maintain full traceability and documentation throughout each phase, from initial receipt of components to final approval, with rigorous quality control measures applied to validate performance and material integrity. This includes verifying compliance with all relevant military standards and ensuring that every part processed can be uniquely identified and its history fully recorded. The work is classified as a subcontract under the NAICS code 811310 and is issued by the Department of National Defence of the Government of Canada, with performance required to occur in British Columbia. The solicitation was posted on April 29, 2026, and responses must be submitted by June 16, 2026. The valves in question are safety-critical components used in submarine systems, meaning any failure could have serious operational or life-safety consequences, necessitating precision, adherence to strict protocols, and accountability at every step of the overhaul process.

General Info

Repair and overhaul of submarine valves to military specs, including inspection, testing, and recertification.

Agency

Government of Canada → Department of National Defence

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

British Columbia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedApr 29

subcontract

Response DeadlineJun 16

Deadline has passed

Submission Closed

06/16/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

Office AddressN/A

ContactsNo contact information available

Full Description

Refurbishment, dimensional inspection, material testing, and recertification of used submarine valves to original military specifications, with full traceability and documentation.