This Solicitation opportunity from California was posted on September 23, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

RFQ #SHARC-658 SELF-CONTAINED BREATHING APPARATUS (SCBA) MAINTENANCE, TESTING, TRAINING, AND DISPOSAL

Closed

SHARC-658State & Local

Submission Closed10/08/2026, 08:30:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 811310

New

SLED

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310, focusing on commercial and industrial machinery and equipment repair. The solicitation was posted on November 2, 2026, with a strict response deadline of November 4, 2026. Interested parties must submit their responses through the official WMATA supplier portal by the specified cutoff time.

Washington Metropolitan Area Transit Authority

POSTED

DEADLINE

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting lump sum bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, no cab or loader, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The scope of work requires the contractor to provide all transportation, labor, supervision, and new manufacturer-specification parts to diagnose and repair the clutch assembly and power take-off system. Key technical requirements include replacing friction discs, bearings, oil seals, and O-rings, as well as resurfacing the flywheel and replacing hydraulic pipes and filters as necessary. The contractor must perform final operational testing to verify proper engagement and disengagement before the Facility Maintenance Department accepts the work. This solicitation is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone concerns. Interested bidders must submit a bid sheet, completed supplier packet (including W-9 and self-certification), proof of insurance, and any applicable SBA certification letters to Angie Mahoney by November 3, 2026, at 3:00 PM CST. Award will be based on best value, considering the contractor's qualifications, experience, and the detail of their written proposal. The contract is subject to various federal regulations, including Service Contract Labor Standards under Wage Determination 2015-4687 Revision 31, Buy American preferences, and mandatory training and security requirements.

Earle C. Clements Job Corps Center

POSTED

DEADLINE

Vehicle Armoring and Ballistic IntegrationThis subcontract involves providing specialized vehicle armoring and ballistic integration services for prime contractors supporting Oil and Gas Development Company Limited security projects in Lakki Marwat, KPK, Pakistan. The scope of work includes stripping vehicle interiors to install ballistic steel or composite armor plates within the doors, pillars, and floors, as well as reinforcing braking and suspension systems to accommodate the additional weight of the armor. The contractor is required to deliver fully road-worthy vehicles that adhere to international ballistic standards and comply with PPRA rules. Interested parties must respond by November 16, 2026, to fulfill these technical requirements under NAICS code 811310.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

System Maintenance & Field OperationsThis subcontract for System Maintenance and Field Operations involves providing physical maintenance, battery swapping, and equipment repair for prime contractors managing shared micromobility projects for the City of Syracuse Department of Public Works. The selected provider will be responsible for executing specific maintenance protocols for units and infrastructure using specialized tools and vehicles, while adhering to a strict repair timeline and providing a comprehensive maintenance manual. The primary objective is to deliver a well-maintained fleet supported by detailed repair logs and documented uptime. This opportunity falls under NAICS code 811310, with a response deadline set for December 4, 2026.

Department of Public Works

POSTED

DEADLINE

Maintenance of Fire Suppression System for HAZMAT lockers (Yokosuka Naval Base)

Solicitation # N6264927QB005

Solicitation N6264927QB005 is for the semi-annual and annual maintenance and certification of fire suppression systems for HAZMAT lockers at the Puget Sound Naval Shipyard Yokosuka and Intermediate Maintenance Facility (PSNS&IMF) in Yokosuka, Japan. The scope of work specifically covers Pyro-Chem Monarch and ANSUL I-101 industrial fire suppression systems or similar equivalents. The contract is structured as a firm-fixed unit price agreement with a base year running from December 1, 2026, to November 30, 2027, and four subsequent option years extending through November 30, 2031. Performance will take place on-site at Berth 12 or other prearranged locations within Fleet Activities Yokosuka. Award will be based on the most advantageous offer, considering technical capability and price. This solicitation is restricted to sources authorized to operate and do business in Japan per DFARS 252.225-7042, and prime contractors based outside of Japan must provide proof of incorporation to demonstrate compliance. Key requirements include the installation of maintenance and certification labels according to NFPA standards and the use of Wide Area WorkFlow (WAWF) for electronic invoicing. Offerors must maintain an active registration in the System for Award Management (SAM) and submit quotations on an all-or-none basis to be eligible for award.

Navsup Flt Logistics Ctr Yokosuka

POSTED

DEADLINE

LEKTRIEVERS and MOVABLE SHELVING UNITS MAINTENANCE SERVICE CONTRACT-BASE PLUS FOUR OPTION YEARS WESTERN AREA POWER ADMINISTRATION DESERT SOUTHWEST REGIONThe Western Area Power Administration, under the Department of Energy, is forecasting a maintenance service contract for Lektrievers and movable shelving units within the Desert Southwest Region. This requirement is designated as a small business set-aside under NAICS code 811310, with the primary place of performance located in Arizona. The contract structure consists of a base period followed by four option years. The current incumbent for these services is Business and Office System Services LLC. Interested parties can coordinate with the Small Business Program Managers for further details regarding this upcoming procurement opportunity.

Western Area Power Administration

POSTED

DEADLINE

EO 14398 WAPA SNR: Tracy Substation KT2A Transformer RefurbishmentThe Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the Tracy Substation KT2A Transformer Refurbishment project. This contract falls under NAICS code 811310 and is focused on the specialized refurbishment of transformer equipment. The procurement is listed with a posted date of November 1, 2026. Transfluid Services, Inc. is identified as the incumbent contractor for this work. Interested parties may coordinate with the Small Business Program Managers for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

PCB REFURBISHMENTThe Western Area Power Administration, under the Department of Energy, has issued a forecast for a PCB Refurbishment contract. This project is categorized under NAICS code 811310 and is designated as a small business set-aside. The work is expected to be performed in Colorado, with Bennett-Alvarado, Inc. listed as the incumbent contractor. The forecast was posted on November 1, 2026. Interested parties can coordinate with the Small Business Program Managers, specifically Tetrault or Teves, for further information regarding this acquisition.

Western Area Power Administration

POSTED

DEADLINE

Western Area Power Administration (WAPA) Sierra Nevada Region (SNR) requires a Contractor to replace the KY1A bushings at the Trinity Substation using government furnished bushings.The Western Area Power Administration Sierra Nevada Region is seeking a contractor to perform the replacement of KY1A bushings at the Trinity Substation located in California. This project involves the installation of bushings provided by the government. This opportunity is forecasted as a small business set-aside under NAICS code 811310. The contract is managed by the Department of Energy, with Springfield Solutions LLC listed as the incumbent contractor.

Western Area Power Administration

POSTED

DEADLINE

ANNUAL PREVENTATIVE MAINTENNCE FOR OVERHEAD DOORS AND ROLLING GATES ANNUAL (Base plus Four Option Years) WESTERN AREA POWER ADMINISTRATION DESERT SOUTHWEST REGIONThe Western Area Power Administration, under the Department of Energy, is forecasting a contract for annual preventative maintenance of overhead doors and rolling gates within the Desert Southwest Region. The project is structured as a base year with four additional option years and will be performed in Arizona. This opportunity is designated as a small business set-aside under NAICS code 811310. The incumbent contractor for these services is A.S.A.P. Door Repair & Service, Inc.

Western Area Power Administration

POSTED

DEADLINE

Corning KY3A Transformer Refurbishment for the Western Area Power AdministrationThe Western Area Power Administration, an agency under the Department of Energy, has issued a forecast for the refurbishment of the Corning KY3A Transformer. This project is designated as a small business set-aside under NAICS code 811310 and is scheduled for performance in California. The procurement process is managed by the Small Business Program Managers, with Springfield Solutions LLC identified as the incumbent contractor. Interested parties can find further details through the official Department of Energy acquisition forecast.

Western Area Power Administration

POSTED

DEADLINE

PHILIP O&M FIRE SYSTEM UPGRADE ELECTRICAL PORTION, EO 14398The Western Area Power Administration, under the Department of Energy, has issued a forecast for the Philip O&M Fire System Upgrade Electrical Portion, identified as EO 14398. This project focuses on electrical work associated with fire system upgrades and will be performed in South Dakota. The procurement is categorized under NAICS code 811310, and the current incumbent contractor for these services is API Group Life Safety USA LLC. The forecast was posted on November 1, 2026, and is listed as an other type of set-aside. Interested parties can coordinate with the Small Business Program Managers, specifically Tetrault and Teves, for further information regarding this acquisition.

Western Area Power Administration

POSTED

1 day ago

DEADLINE

N/A

AI Contract Overview

The County of Riverside, on behalf of the Riverside County Sheriff’s Office Corrections Division, is soliciting quotations under RFQ SHARC-658 for comprehensive maintenance, testing, training, and disposal services for Self-Contained Breathing Apparatus (SCBA) equipment. To maintain operational readiness and ensure the safety of personnel in high-risk custody environments, the agency requires certified on-site mobile testing services. This includes recurring structural inspections, hydrostatic safety re-qualification, and professional component replacement performed in accordance with OSHA, NFPA, and DOT standards to minimize equipment turnaround times and avoid station shortfalls. Beyond technical maintenance, the contract encompasses essential training to ensure staff remain proficient in the operation, inspection, and deployment of SCBA equipment according to agency policies. Additionally, the selected provider will be responsible for the professional removal and disposal of end-of-life components, such as compressed air cylinders, following manufacturer guidelines and regulatory requirements to reduce liability. Interested parties must submit their responses by October 8, 2026, with the primary point of contact being John J Farrar.

General Info

Riverside County seeks SCBA maintenance, testing, training, and disposal services by October 8, 2026.

Agency

California → County of Riverside

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

CA, USA

Set-Aside

NONE

Documents

18 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedSep 23

Solicitation

Response DeadlineOct 8

Deadline has passed

Submission Closed

10/08/2026, 08:30:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyCalifornia → County of Riverside

Contacts1 person available

OfficeN/A

Organization / AgencyCalifornia → County of Riverside

Office AddressN/A

Contacts

John J Farrar

contact@example.gov

+1 (555) 000-0000

Full Description

The Riverside County Purchasing & Fleet Department on behalf of the Riverside County Sheriff’s Office (RSO), Corrections Division, is soliciting quotations for Self-Contained Breathing Apparatus (SCBA) Maintenance, Testing, Training, and Disposal as detailed in this RFQ. The Riverside County Sheriff’s Office (RSO), Corrections Division, utilizes Self-Contained Breathing Apparatus (SCBA) equipment to safeguard personnel operating within high-risk, toxic, and hazardous custody environments. To ensure strict operational safety and full compliance with state and federal regulations, these high-pressure life-safety cylinders require specialized recurring structural inspection, hydrostatic safety re-qualification, and professional component replacement when needed. The purpose of this request is to secure certified, on-site mobile testing services to minimize equipment turnaround times, avoid station shortfalls, and ensure continuous mission readiness at each detention facility. Due to the critical nature, the equipment requires consistent professional maintenance, periodic testing, and manufacturer-compliant servicing to ensure safe operation and regulatory compliance. SCBA cylinders must undergo hydrostatic testing, performance inspections, and component servicing in accordance with OSHA, NFPA, and DOT standards. Training is also an essential component for SCBA equipment. Staff must remain proficient in proper operation, inspection, deployment, and handling to ensure equipment is used safely and effectively. Regular training helps maintain operational readiness and supports adherence to agency policies and established correctional procedures. In addition, SCBA equipment has defined service life limits. Certain components, including compressed air cylinders, must be removed from service and disposed of in accordance with manufacturer guidelines and regulatory requirements. Proper end-of-life disposal ensures safety, reduces liability, and maintains inventory accountability.