Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on June 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Roof Sealant Installation and Application

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238160
New
Inland Empire Job Corps-Request for Quote Roof Design & Build
Solicitation # inland-empire-job-corps-request-quote-roof-design-build
Management & Training Corporation is seeking quotes for a fixed-price design-build subcontract to construct an over-build enclosure for the lower roof of Building G at the Inland Empire Job Corps Center in San Bernardino, California. The project involves designing and installing a roof covering approximately 800 gross square feet, featuring a 3% sloped roof with a single ply, EPDM 60 mil roofing system over wood or metal decking. The scope includes structural framing that extends existing bearing walls or utilizes a new post-beam system, the installation of three LED strip light fixtures with one emergency backup, and strict adherence to OSHA safety standards and the Architectural Barriers Act Accessibility Standard of 2007. The total period of performance is 240 days, with a requirement to complete the work within 100 consecutive business days following the Notice to Proceed. Bids are due by November 2, 2026, and will be evaluated based on overall best value. This is a small business set-aside opportunity open to various SBA certifications. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Bidders must conduct a physical site visit and sign an attendance roster to be eligible. The project is subject to Construction Wage Rate Requirements, necessitating compliance with California prevailing wages and the submission of weekly certified payroll reports. Additionally, all inspections and testing must be conducted by an independent, third-party agency registered in California. Required insurance minimums include 1 million dollars per occurrence for general liability, 1 million dollars for auto, and 500,000 dollars for workers compensation.
Inland Empire Job Corps

POSTED

about 2 hours ago

DEADLINE

in 6 days
NAICS: 238160
New
SLED
Roofing Contractor (EPDM)
San Diego Unified Port District

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 238160
New
SLED
Sheet Metal and Flashing Specialist
San Diego Unified Port District

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 238160
New
International
Residential Roofing Repair and MaintenanceThis subcontract agreement involves the provision of repair, upgrade, and maintenance services for roofing systems on residential property projects managed by Ipswich Borough Council. The selected contractor will work under prime contractors to execute specialized construction tasks using materials such as roofing membranes, tiles, slates, and flashing. All work must be performed in accordance with UK building regulations to ensure the delivery of weather-tight and fully functional roofing systems. The opportunity was posted on October 27, 2026, with a response deadline of November 25, 2026. Classified under NAICS code 238160 and CPV 45260000, the contract focuses on essential residential infrastructure improvements within the jurisdiction of the Ipswich Borough Council.
Ipswich Borough Council

POSTED

about 16 hours ago

DEADLINE

in 28 days
NAICS: 238160
New
SLED
Building Envelope and Finishes
Houston County Board of Commissioners

POSTED

about 17 hours ago

DEADLINE

in about 1 month
NAICS: 238160
New
SLED
EPDM Roofing System (Supply & Install)This subcontract opportunity involves the supply and installation of mechanically-fastened EPDM roofing systems for the Bradley Academy Museum exterior renovation projects. The selected contractor will be responsible for installing EPDM membranes along with all necessary flashing and accessories over prepared substrates, ensuring the final delivery of a fully waterproof roofing system that adheres to all standard roofing codes. Managed by the Tennessee Parks and Recreation agency under NAICS code 238160, the project was posted on October 27, 2026. Interested parties must submit their responses by the deadline of November 17, 2026.
Parks and Recreation

POSTED

about 17 hours ago

DEADLINE

in 20 days
NAICS: 238160
New
SLED
Liquid Applied Membrane SpecialistThis subcontract opportunity is for a Liquid Applied Membrane Specialist to provide waterproofing and sealing services for prime contractors on Glendale Unified School District facility projects in Glendale, California. The selected contractor will be responsible for applying liquid-applied membranes to designated roof areas and penetrations according to project drawings to ensure complete watertight integrity. To qualify for this role, contractors must hold a valid CSLB license and provide the necessary manufacturer installation certifications. Interested parties must submit their responses by November 18, 2026.
Glendale Unified School District

POSTED

about 18 hours ago

DEADLINE

in 22 days
NAICS: 238160
New
SLED
Modified Bituminous Membrane Roofing InstallerThis subcontract opportunity is for a Modified Bituminous Membrane Roofing Installer to perform work on Glendale Unified School District facility projects in Glendale, California. The selected contractor will be responsible for installing Cold Applied 2-Ply Thermoplastic Hybrid Roof Systems, which includes the removal of existing membranes and insulation, filling low spots, installing wood nailers, and applying KEE-Stone HP membranes and flashings in accordance with NRCA manuals. Additional requirements include the installation of metal pans and 8 inch equipment pads to ensure a completely watertight roof. To qualify for this project, contractors must possess a valid CSLB license and undergo criminal background fingerprinting. The final delivery must include both a manufacturer warranty and a 5-year installer warranty. Interested parties must submit their responses by the deadline of November 18, 2026.
Glendale Unified School District

POSTED

about 18 hours ago

DEADLINE

in 22 days
NAICS: 238160
New
SLED
Roofing Improvements Project At Multiple Sites
Solicitation # 009-26/27
The Glendale Unified School District is soliciting bids for a Roofing Improvements Project at multiple sites in Glendale, California, under solicitation number 009-26/27. The project involves the demolition and installation of new roofing systems across various locations, including Balboa, John Marshall, and Thomas Edison Elementary Schools, as well as La Crescenta Elementary School. The contract will be awarded to the lowest responsive responsible bidder. Engineering estimates for the work range from approximately 653,969 dollars for La Crescenta Elementary to over 2 million dollars for Thomas Edison Elementary. The successful contractor must provide all labor, materials, and equipment, adhering to NRCA Roofing and Waterproofing Manual standards and manufacturer specifications. Key requirements include the provision of 100 percent performance and payment bonds, compliance with California prevailing wage laws, and adherence to a three percent participation goal for Disabled Veteran Business Enterprises. Bidders must submit detailed escrow bid documentation and certify compliance with various regulations, including the Iran Contracting Act and Education Code fingerprinting requirements. Final acceptance is contingent upon manufacturer inspection and the issuance of a warranty.
Glendale Unified School District

POSTED

about 18 hours ago

DEADLINE

in 22 days
NAICS: 238160
New
SLED
Sheet Metal Flashing, Trim, and Gutters
Water

POSTED

about 19 hours ago

DEADLINE

in 27 days
NAICS: 238160
New
SLED
Metal Shingle Roofing Installation
Water

POSTED

about 19 hours ago

DEADLINE

in 27 days
NAICS: 238160
New
SLED
Asphalt Shingle Roofing Installation
Water

POSTED

about 19 hours ago

DEADLINE

in 27 days

AI Contract Overview

Show more

The contract titled Roof Sealant Installation and Application involves the professional application of a new rubberized roof sealant with full adherence to manufacturer specifications, encompassing sealing, curing, and comprehensive quality assurance processes. The work is scoped to ensure durable, long-term protection of roofing surfaces through precise technique and materials compliant with industry standards, with all tasks requiring rigorous inspection and documentation to validate performance and compliance. This is a subcontract classified under NAICS code 238160 and set aside exclusively for Service-Disabled Veteran-Owned Small Businesses, reflecting a federal procurement commitment to support veteran-owned enterprises. The opportunity was posted on June 18, 2026, with a response deadline of July 2, 2026, at 4:00 PM. Performance is to be carried out at a location with a zip code of 01434 under the oversight of the Department of Defense through the agency W6QK Acc-Pica. All submissions must align with the requirements outlined in the solicitation, including technical compliance, scheduling, and certification of business eligibility under the SDVOSB set-aside program.

General Info

SDVOSB set-aside for rubberized roof sealant application at 01434 under DoD oversight.

Agency

Department Of Defense → W6QK Acc-Pica

NAICS

238160 - Roofing Contractors

Place of Performance

MA, 01434, USA

Set-Aside

SDVOSBC

Documents

This scope was carved out of W15QKN26QA132.

The full solicitation package (7 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Rubberized Roof Sealant Removal and Replacement, Fort Devens

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QK Acc-Pica
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → W6QK Acc-Pica
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Professional application of new rubberized roof sealant including sealing, curing, and quality assurance per manufacturer specs.

More opportunities from Department Of Defense → W6QK Acc-Pica

Same awarding agency

NAICS: 493190
Federal
Packaging, Preservation, and Marking (PP&M) ServicesThis contract involves the provision of packaging, preservation, and marking services in strict compliance with military standards, requiring that all items be prepared for shipment to Picatinny Arsenal or Foreign Military Sales destinations using MIL-STD-130 compliant UID marking, corrosion protection methods, and military-grade packaging protocols. The work encompasses full containerization to ensure safe, secure, and traceable transport of sensitive defense equipment and components throughout the logistics chain. The contract is classified as a subcontract under NAICS code 493190 and is administered by the Department of Defense through the W6QK Acc-Pica office. It was posted on June 25, 2026, and requires full adherence to U.S. military logistical and identification standards without exceptions, emphasizing durability, traceability, and environmental protection during storage and transit. All deliverables must meet stringent defense logistics requirements to support operational readiness and international defense partnerships.
Other Warehousing and Storage

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Federal
Weapon System Testing and Quality Assurance (QA) ServicesThe contract pertains to comprehensive independent testing and quality assurance services for a weapon system, encompassing First Article Inspection, live-fire endurance evaluations, accuracy and dispersion measurements, environmental resistance testing, and full compliance verification against military standards. These activities are critical to ensuring the system meets rigorous performance, durability, and reliability requirements before field deployment. The work is structured as a subcontract under the Department of Defense, with the contracting office identified as W6QK Acc-Pica, and the North American Industry Classification System code 541380 indicates specialized engineering and technical services. Performance location details are unspecified, and no set-aside provisions or small business preferences are indicated, suggesting the opportunity is open to qualifying firms regardless of size or affiliation. The solicitation was posted in June 2026, and all testing must align precisely with defined military protocols to validate functional integrity under operational conditions.
Testing Laboratories and Services

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332212
Federal
Barrel Forging and Rifling ServicesThe contract involves the manufacturing and processing of M240B machine gun barrels to exact military specifications, encompassing forging, rifling, chambering, and stress-relieving operations to ensure superior accuracy, heat resistance, and durability under sustained fire conditions. All work must meet stringent defense standards for performance and reliability, with the finished barrels intended for military use in high-demand operational environments. The service is classified as a subcontract under NAICS code 332212, linked to the Department of Defense and administered by W6QK Acc-Pica. The solicitation was posted in June 2026, with no set-aside provisions specified. While specific performance location and point of contact details are not provided, the work is expected to be carried out by a qualified industrial partner capable of delivering precision-engineered barrels consistent with military-grade requirements for longevity and combat readiness.
Hand and Edge Tool Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332721
Federal
Precision Machined Fire Control Group ComponentsThe contract entails the precision manufacturing of critical fire control components including trigger housing, sear, hammer, and disconnector, produced through advanced CNC machining, controlled heat treatment, and specialized surface finishing to ensure adherence to stringent military durability and reliability standards. These components must meet exacting tolerances and performance benchmarks required for high-stress operational environments, with process controls in place to guarantee consistency and traceability across production batches. The work is classified as a subcontract under NAICS code 332721, issued by the Department of Defense through the W6QK Acc-Pica office, with the opportunity posted in June 2026. While the place of performance and point of contact details are unspecified, the nature of the project implies a requirement for certified manufacturing facilities capable of handling defense-grade materials and complying with federal quality and security protocols. Production must align with the rigorous expectations of military-grade equipment, ensuring functionality under extreme conditions without compromise.
Precision Turned Product Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 332999
Federal
M240B Machine Gun Final Assembly and IntegrationThe contract entails the final assembly, integration, and configuration of M240B machine guns strictly in accordance with U.S. military specifications and the FN Herstal Technical Data Package. This work includes comprehensive quality assurance protocols, mandatory test firing to verify functionality and reliability, and full compliance with First Article Inspection requirements to ensure all components meet rigorous performance and dimensional standards. All processes must be executed with precision to guarantee operational readiness and consistency with authorized military hardware. The subcontract is classified under NAICS code 332999 and is issued under the Department of Defense through the W6QK Acc-Pica office. The work will be performed in accordance with federal defense contracting requirements, though specific performance location and contact details are not provided. The solicitation was posted on June 25, 2026, and remains active for qualified subcontractors seeking to support defense manufacturing efforts. Participation requires demonstrated capability in small arms final assembly, adherence to technical data packages, and established quality control systems verified through military inspection processes.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 541715
Federal
Rapid Response and Prototyping Process DevelopmentThis subcontract under the Department of Defense, managed by W6QK Acc-Pica, focuses on the development and implementation of rapid prototyping processes for prime contractors supporting US Army DEVCOM AC projects. The primary objective is to address high-priority mission needs by designing agile workflows and prototyping cycles that bridge technical gaps through accelerated research and development. To achieve this, the project requires the use of specialized rapid prototyping facilities and agile development methodologies. The contract deliverables include the creation of comprehensive prototyping frameworks, the production of functional prototypes, and the establishment of streamlined response processes. This effort is categorized under NAICS code 541715, with a response deadline set for March 4, 2031.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541611
Federal
Operational Environment Evaluation & Requirements AnalysisThis subcontract, titled Operational Environment Evaluation & Requirements Analysis, is issued by the Department of Defense under agency W6QK Acc-Pica. The primary objective is to evaluate operational environments for prime contractors on US Army DEVCOM AC projects to identify specific technology transition opportunities. This involves observing and analyzing operational missions, training scenarios, and field situations across military, federal, and civilian sectors, which requires the contractor to be capable of operating within military operational environments. The scope of work culminates in the delivery of detailed operational environment analysis reports and technology gap assessments. Classified under NAICS code 541611, the opportunity was posted on June 2, 2026, with a response deadline set for March 4, 2031.
Administrative Management and General Management Consulting Services

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541330
Federal
Technology Utilization and Integration SupportThe Technology Utilization and Integration Support subcontract, managed by the Department of Defense under W6QK Acc-Pica, focuses on transitioning commercial, academic, and agency technologies into operational capabilities for US Army DEVCOM AC projects. The selected provider will be responsible for identifying transition-ready technologies, assessing maturity levels, and leading multi-disciplinary teams to integrate these technologies into final capabilities. This role requires strong systems engineering capabilities to ensure successful implementation. Key deliverables for this engagement include comprehensive transition plans, detailed integration reports, and the development of functional prototypes. The contract falls under NAICS code 541330 and has a response deadline of March 4, 2031.
Engineering Services

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541715
Federal
Advanced and Innovative Technology Review ServicesThe Advanced and Innovative Technology Review Services subcontract, managed by the Department of Defense under agency W6QK Acc-Pica, focuses on the continuous monitoring and evaluation of advanced technologies for prime contractors supporting US Army DEVCOM AC projects. The scope of work involves analyzing emerging technology trends for government applications and coordinating with academic institutions, government research labs, and various agencies to identify new information sources. Key deliverables include the production of technology review reports, detailed meeting summaries, and curated lists of relevant technologies. This effort falls under NAICS code 541715 and is scheduled with a response deadline of March 4, 2031.
Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

5 months ago

DEADLINE

in over 4 years
View Details
NAICS: 541511
Federal
Software Integration and Interoperability ServicesThe contract awards services to maintain and enhance associative interfaces between ABAQUS and leading third-party CAD tools including Pro/ENGINEER, CATIA, and Wave6, ensuring seamless data exchange and workflow integration for engineering simulation users. The work focuses on sustaining existing interoperability capabilities while advancing functionality to support evolving software versions and user requirements, with an emphasis on reliability, performance, and user experience across multi-platform environments. This effort supports defense-related engineering workflows by bridging design and analysis ecosystems critical to product development and simulation fidelity. The contract is classified as a subcontract under NAICS code 541511 for custom computer programming services, issued by the Department of Defense through its W6QK Acc-Pica agency, with performance required in Waltham, Massachusetts, 02451. Although details such as solicitation numbers and point of contact are not provided, the posting date of May 14, 2026 indicates the agreement is anticipated to commence following a future competitive process. The scope demands deep technical expertise in CAE software architecture, API development, and cross-platform integration to ensure continued compatibility and functionality between industry-standard design tools and ABAQUS simulation solutions.
Custom Computer Programming Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541330
Federal
Custom Engineering Analysis SupportThe contract titled Custom Engineering Analysis Support provides on-demand engineering expertise to support DEVCOM-AC teams with complex simulations, model validation, and advanced use cases requiring specialized technical assistance. This subcontract is issued under NAICS code 541330 for scientific and technical consulting services and is administered by W6QK Acc-Pica under the Department of Defense. The work is performance-based at a designated location in Waltham, Massachusetts with a ZIP code of 02451. Services are mobilized as needed to address urgent or intricate technical challenges that exceed standard capabilities, ensuring timely and precise engineering solutions for defense-related modeling and simulation efforts. The contract does not specify a solicitation number or set-aside type, indicating it is likely an unfunded or task-order-based arrangement within an existing overarching agreement.
Engineering Services

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 611430
Federal
Specialized Engineering Training DeliveryThe contract entails the delivery of specialized instructor-led and virtual training on advanced engineering software modules including ABAQUS/CAE, Composites Modeler, fe-safe, XFlow, and Wave6 to Army engineers. The training is designed to enhance technical proficiency in simulation and analysis tools critical to defense engineering applications, ensuring personnel are equipped to leverage these platforms effectively in mission-critical projects. Instruction must be tailored to meet the technical needs of military engineering teams, emphasizing practical application and real-world problem solving using these industry-standard systems. Performance is required to take place in Waltham, Massachusetts, with a NAICS code of 611430 indicating the work falls under custom computer programming services, specifically within technical training and education. The contract is structured as a subcontract under the Department of Defense’s W6QK Acc-Pica office, with no set-asides specified, indicating open competition among qualified vendors. The solicitation was posted on May 14, 2026, and while no point of contact or specific funding details are provided, the location and software focus suggest a strong alignment with DoD efforts to modernize computational engineering capabilities through targeted technical education initiatives.
Professional and Management Development Training

POSTED

6 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 238160
Closed
Federal
Roof Sealant Removal and Surface Preparation
W6QK Acc-Pica

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 238160
Closed
Federal
Roofing and Waterproofing Services
W6QK Acc-Rsa

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 238160
Closed
Federal
Roofing System Installation
Indian Health Service

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 238160
Awarded
Federal
Provide waterproofing services for office spaces roof
Solicitation # 191N6526Q0066
US Embassy New Delhi

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 238160
Closed
Federal
Design and Construction Services for the FY26 National Roofing Program (NRP) Project #1 – TX068 – Seagoville, TX
Solicitation # W912QR-61215931
W072 Endist Louisville

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 238160
Awarded
Federal
127EAW26Q0033 - Placerville Nursery Roof Replacement
Solicitation # 127EAW26Q0033
Csa Southwest 6 Usda-Fs

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 238160
Awarded
Federal
Roof Repair and Weather Proofing for the Santa Fe Service Unit
Solicitation # 75H70726Q00069
Albuquerque Area Indian Health Svc

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 238160
Closed
Federal
Modified Bitumen Membrane Installation
US Embassy New Delhi

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 238160
Closed
Federal
Roofing and Waterproofing Services
FCC Beaumont

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 238160
Closed
Federal
Full-Service Roof Repair & Weatherproofing – Business Office Building
Albuquerque Area Indian Health Svc

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 238160
Closed
Federal
Roofing System Installation
Department Of Commerce Nist

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 238160
Closed
Federal
Roof Installation
Construction A/e Team 2 Fws

POSTED

4 months ago

CLOSED

4 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS