Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Roofing System Installation

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 238160
New
Inland Empire Job Corps-Request for Quote Roof Design & Build
Solicitation # inland-empire-job-corps-request-quote-roof-design-build
Management & Training Corporation is seeking quotes for a fixed-price design-build subcontract to construct an over-build enclosure for the lower roof of Building G at the Inland Empire Job Corps Center in San Bernardino, California. The project involves designing and installing a roof covering approximately 800 gross square feet, featuring a 3% sloped roof with a single ply, EPDM 60 mil roofing system over wood or metal decking. The scope includes structural framing that extends existing bearing walls or utilizes a new post-beam system, the installation of three LED strip light fixtures with one emergency backup, and strict adherence to OSHA safety standards and the Architectural Barriers Act Accessibility Standard of 2007. The total period of performance is 240 days, with a requirement to complete the work within 100 consecutive business days following the Notice to Proceed. Bids are due by November 2, 2026, and will be evaluated based on overall best value. This is a small business set-aside opportunity open to various SBA certifications. For bids equal to or greater than $25,000, a bid bond of 20% of the base bid is required, and the awarded contractor must provide performance and payment bonds from a surety with at least an A- rating. Bidders must conduct a physical site visit and sign an attendance roster to be eligible. The project is subject to Construction Wage Rate Requirements, necessitating compliance with California prevailing wages and the submission of weekly certified payroll reports. Additionally, all inspections and testing must be conducted by an independent, third-party agency registered in California. Required insurance minimums include 1 million dollars per occurrence for general liability, 1 million dollars for auto, and 500,000 dollars for workers compensation.
Inland Empire Job Corps

POSTED

about 2 hours ago

DEADLINE

in 6 days
NAICS: 238160
New
SLED
Roofing Contractor (EPDM)
San Diego Unified Port District

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 238160
New
SLED
Sheet Metal and Flashing Specialist
San Diego Unified Port District

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 238160
New
International
Residential Roofing Repair and MaintenanceThis subcontract agreement involves the provision of repair, upgrade, and maintenance services for roofing systems on residential property projects managed by Ipswich Borough Council. The selected contractor will work under prime contractors to execute specialized construction tasks using materials such as roofing membranes, tiles, slates, and flashing. All work must be performed in accordance with UK building regulations to ensure the delivery of weather-tight and fully functional roofing systems. The opportunity was posted on October 27, 2026, with a response deadline of November 25, 2026. Classified under NAICS code 238160 and CPV 45260000, the contract focuses on essential residential infrastructure improvements within the jurisdiction of the Ipswich Borough Council.
Ipswich Borough Council

POSTED

about 16 hours ago

DEADLINE

in 28 days
NAICS: 238160
New
SLED
Building Envelope and Finishes
Houston County Board of Commissioners

POSTED

about 17 hours ago

DEADLINE

in about 1 month
NAICS: 238160
New
SLED
EPDM Roofing System (Supply & Install)This subcontract opportunity involves the supply and installation of mechanically-fastened EPDM roofing systems for the Bradley Academy Museum exterior renovation projects. The selected contractor will be responsible for installing EPDM membranes along with all necessary flashing and accessories over prepared substrates, ensuring the final delivery of a fully waterproof roofing system that adheres to all standard roofing codes. Managed by the Tennessee Parks and Recreation agency under NAICS code 238160, the project was posted on October 27, 2026. Interested parties must submit their responses by the deadline of November 17, 2026.
Parks and Recreation

POSTED

about 17 hours ago

DEADLINE

in 20 days
NAICS: 238160
New
SLED
Liquid Applied Membrane SpecialistThis subcontract opportunity is for a Liquid Applied Membrane Specialist to provide waterproofing and sealing services for prime contractors on Glendale Unified School District facility projects in Glendale, California. The selected contractor will be responsible for applying liquid-applied membranes to designated roof areas and penetrations according to project drawings to ensure complete watertight integrity. To qualify for this role, contractors must hold a valid CSLB license and provide the necessary manufacturer installation certifications. Interested parties must submit their responses by November 18, 2026.
Glendale Unified School District

POSTED

about 18 hours ago

DEADLINE

in 22 days
NAICS: 238160
New
SLED
Modified Bituminous Membrane Roofing InstallerThis subcontract opportunity is for a Modified Bituminous Membrane Roofing Installer to perform work on Glendale Unified School District facility projects in Glendale, California. The selected contractor will be responsible for installing Cold Applied 2-Ply Thermoplastic Hybrid Roof Systems, which includes the removal of existing membranes and insulation, filling low spots, installing wood nailers, and applying KEE-Stone HP membranes and flashings in accordance with NRCA manuals. Additional requirements include the installation of metal pans and 8 inch equipment pads to ensure a completely watertight roof. To qualify for this project, contractors must possess a valid CSLB license and undergo criminal background fingerprinting. The final delivery must include both a manufacturer warranty and a 5-year installer warranty. Interested parties must submit their responses by the deadline of November 18, 2026.
Glendale Unified School District

POSTED

about 18 hours ago

DEADLINE

in 22 days
NAICS: 238160
New
SLED
Roofing Improvements Project At Multiple Sites
Solicitation # 009-26/27
The Glendale Unified School District is soliciting bids for a Roofing Improvements Project at multiple sites in Glendale, California, under solicitation number 009-26/27. The project involves the demolition and installation of new roofing systems across various locations, including Balboa, John Marshall, and Thomas Edison Elementary Schools, as well as La Crescenta Elementary School. The contract will be awarded to the lowest responsive responsible bidder. Engineering estimates for the work range from approximately 653,969 dollars for La Crescenta Elementary to over 2 million dollars for Thomas Edison Elementary. The successful contractor must provide all labor, materials, and equipment, adhering to NRCA Roofing and Waterproofing Manual standards and manufacturer specifications. Key requirements include the provision of 100 percent performance and payment bonds, compliance with California prevailing wage laws, and adherence to a three percent participation goal for Disabled Veteran Business Enterprises. Bidders must submit detailed escrow bid documentation and certify compliance with various regulations, including the Iran Contracting Act and Education Code fingerprinting requirements. Final acceptance is contingent upon manufacturer inspection and the issuance of a warranty.
Glendale Unified School District

POSTED

about 18 hours ago

DEADLINE

in 22 days
NAICS: 238160
New
SLED
Sheet Metal Flashing, Trim, and Gutters
Water

POSTED

about 19 hours ago

DEADLINE

in 27 days
NAICS: 238160
New
SLED
Metal Shingle Roofing Installation
Water

POSTED

about 19 hours ago

DEADLINE

in 27 days
NAICS: 238160
New
SLED
Asphalt Shingle Roofing Installation
Water

POSTED

about 19 hours ago

DEADLINE

in 27 days

AI Contract Overview

Show more

This subcontract opportunity, managed by the Department of Defense through DLA Mechanicsburg, involves the installation of a comprehensive roofing system. The scope of work includes the application of roofing membranes, flashing, insulation, and all related components necessary to ensure effective waterproof protection for the facility. The project is categorized under NAICS code 238160. Interested parties must submit their responses by the deadline of September 4, 2026, at 8:30 PM. The official solicitation was posted on August 17, 2026.

General Info

DoD subcontract for roofing installation at DLA Mechanicsburg; responses due September 4, 2026.

Agency

Department Of Defense → SPRMM1 DLA Mechanicsburg

NAICS

238160 - Roofing Contractors

Place of Performance

PA

Set-Aside

NONE

Documents

This scope was carved out of SPRMM126QMH99.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

MONITOR,20.1 INCH

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → SPRMM1 DLA Mechanicsburg
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Installation of roofing membrane, flashing, insulation, and related components for waterproof protection.

More opportunities from Department Of Defense → SPRMM1 DLA Mechanicsburg

Same awarding agency

NAICS: 488410
New
Federal
MIL-SPEC Packaging and Preservation for Mechanical AssembliesThis subcontract involves providing specialized preservation, packaging, and marking services for mechanical conduit assemblies supporting prime contractors on DLA Mechanicsburg supply contracts. The scope of work requires the use of industrial marking and labeling equipment to ensure all items are processed and delivered ready for FOB Destination shipment. Compliance is mandatory with specific military standards, including MIL-STD-2073 for packing and preservation, as well as MIL-STD-129 and SPI 03950-10184 for package marking. This Department of Defense requirement falls under NAICS code 488410 and is managed by the SPRMM1 DLA Mechanicsburg agency.
Motor Vehicle Towing

POSTED

about 20 hours ago

DEADLINE

in 16 days
View Details
NAICS: 332710
New
Federal
Manufacture of Mechanical Conduit AssembliesThis subcontract involves the manufacture of custom mechanical conduit assemblies for prime contractors supporting DLA Mechanicsburg. The scope of work requires the fabrication of three specific assemblies identified by NIINs 017027712, 017027714, and 017027719. All production must strictly adhere to TDP Version 002 and specified CAGE codes, with physical identification meeting MIL-STD-130, Rev N standards. To qualify, the provider must possess precision machining equipment and maintain CMMC certification. It is explicitly noted that additive manufacturing is prohibited for these components. The opportunity is categorized under NAICS code 332710 and is managed by the Department of Defense.
Machine Shops

POSTED

about 20 hours ago

DEADLINE

in 16 days
View Details
NAICS: 334111
New
Federal
Supply of Flat Panel Monitors (NSN 7025-01-738-4182)This subcontract involves the procurement and delivery of 20 flat panel monitors, identified by NSN 7025-01-738-4182, to support prime contractors for DLA Mechanicsburg. The selected provider is responsible for manufacturing or procuring the monitors according to specified Cage Codes, ensuring all items undergo quality assurance and are marked in accordance with MIL-STD-130, REV N. Additionally, all products must be preserved and packed following MIL-STD-2073 guidelines before being delivered to destination PA5CTQ. To qualify, the contractor must provide proof of being an OEM CAGE code holder or an authorized distributor and must maintain CMMC Level 1 self-certification. This requirement falls under NAICS code 334111 and is managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency.
Electronic Computer Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 3 days
View Details
NAICS: 332710
New
Federal
CONDUIT ASSEMBLY,ME
Solicitation # SPRMM127QGA28
Solicitation SPRMM1-27-Q-GA28, issued by DLA Mechanicsburg on October 27, 2026, seeks quotes for the manufacture and supply of multiple Conduit Assembly, ME units. The requirement includes specific National Item Identification Numbers (NIINs) and requires the items to be physically identified according to MIL-STD-130, Rev N. The procurement is issued under SEPA-EAF Authority, with delivery expected as soon as possible on a FOB Destination basis. Inspection and acceptance are both designated to occur at the origin. The contract mandates strict adherence to quality and packaging standards, specifically MIL-STD-2073-1 for preservation and MIL-STD-129 for marking. Offerors must be authorized distributors of the original manufacturer and must provide the Original Equipment Manufacturer (OEM) CAGE code and part number if they are not the manufacturer. Technical acceptability is the primary evaluation factor, with a prohibition on additive manufacturing unless specifically authorized. Administrative requirements include electronic invoicing via the Wide Area Workflow (WAWF) system and compliance with cybersecurity standards under DFARS 252.204-7012 and CMMC certification levels.
Machine Shops

POSTED

about 20 hours ago

DEADLINE

in 16 days
View Details
NAICS: 332710
New
Federal
CHASSIS,VME,12 SLOT
Solicitation # SPRMM126QMB73
Machine Shops

POSTED

about 20 hours ago

DEADLINE

in 29 days
View Details
NAICS: 333998
New
Federal
MONITOR,FLAT PANEL
Solicitation # SPRMM126QKH35
This solicitation, issued by DLA Mechanicsburg, is for the manufacture and delivery of 20 flat panel monitors (NSN 7025-01-738-4182). The procurement will be awarded based on the Lowest Price Technically Acceptable (LPTA) criteria. Offerors must provide the Original Equipment Manufacturer (OEM) CAGE code and part number, and authorized distributors must provide proof of authorization on company letterhead. Technical acceptability may be verified through original quotations, invoices, or contractual agreements from approved sources. The contract requires strict adherence to MIL-STD-130 for marking and MIL-STD-2073 for packaging, with specific DLR labeling requirements for applicable items. Inspection and acceptance will occur at the origin, and the contractor is responsible for all quality assurance and the maintenance of inspection records for 365 days post-delivery. Payment and invoicing must be processed electronically via PIEE-WAWF using the SPRMM1 DoDAAC. Additionally, the contractor must comply with CMMC Level 1 self-certification and various cybersecurity and trade agreement certifications, including the Buy American Act.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 20 hours ago

DEADLINE

in 3 days
View Details
New
Federal
48--VALVE,REGULATING,FL
Solicitation # SPRMM126QKJ13
The Department of Defense, through DLA Maritime Mechanicsburg, is conducting a sources sought market survey under solicitation SPRMM126QKJ13 for the procurement of 13 regulating valves. The required items are identified by NSN 7H-4820-011728194 and part number 73850-2MOD1. This is a Foreign Military Sales requirement, and the final destination will be provided upon request. The government has determined that it is uneconomical to purchase the data rights or reverse engineer the part, and as such, it does not own the technical data required for the repair or purchase of this item from additional sources. The government intends to solicit and negotiate with a single source under the authority of FAR 6.302-1, though it is currently seeking capability statements and interest from all responsible sources to determine if a competitive procurement is warranted. This action is designated as a total small business set-aside. Interested parties must submit their responses by December 11, 2026. The government is specifically requesting information regarding the commercial status of the item per FAR 2.101(b), typical delivery lead times, and whether FOB Origin and Inspection/Acceptance Origin terms are acceptable. All inquiries and submissions should be directed to Alexander Davies.

POSTED

about 20 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 339999
New
Federal
MIL-SPEC Marking and DLR PackagingThis subcontract, titled MIL-SPEC Marking and DLR Packaging, involves providing specialized marking and packaging services for prime contractors under DLA/NAVSUP supply contracts. The scope of work focuses on the physical identification of IMU-NT3 units in accordance with MIL-STD-130 and the application of DLR labels featuring yellow text on a blue background per MIL-STD-129. Additionally, the contractor is responsible for applying specific color-coded SMIC code markings, including L1, S1, and D4/D5/D7. The project requires the execution of palletization and final packaging following MIL-STD-1330 standards to ensure units are ready for transport. Managed by the Department of Defense through the SPRMM1 DLA Mechanicsburg agency, the opportunity falls under NAICS code 339999. The response deadline for this requirement is November 9, 2026.
All Other Miscellaneous Manufacturing

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 334413
New
Federal
Precision Manufacture of Inertial Measurement Unit (IMU-NT3)This subcontract, managed by the Department of Defense through SPRMM1 DLA Mechanicsburg, involves the precision manufacture of Inertial Measurement Unit (IMU-NT3) hardware components for prime contractors on DLA/NAVSUP supply contracts. The scope of work requires the fabrication and assembly of units in strict accordance with TDP Version 002 and design reference DTS10095-01-002. The contractor must adhere to rigorous quality and regulatory standards, including MIL-STD-130 and MIL-STD-129, while implementing a comprehensive Counterfeit Detection and Avoidance Program (CDAP) to ensure supply chain traceability. Final deliverables consist of completed IMU-NT3 hardware units accompanied by full traceability documentation. The opportunity is categorized under NAICS code 334413.
Semiconductor and Related Device Manufacturing

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 334417
New
Federal
IMU-NT3
Solicitation # SPRMM127QGA27
This solicitation, issued under Emergency Acquisition authority by DLA Mechanicsburg, seeks the manufacture of the IMU-NT3 (NIIN: 016939087) in accordance with the design represented by Cage Code 34NS0 and Technical Data Package version 002. Award evaluations will be conducted using the Lowest Price Technically Acceptable (LPTA) criteria. The contract requires strict adherence to MIL-STD-130 for physical identification and MIL-STD-2073-1 for preservation and packaging, with specific requirements for domestic and overseas shipments. Inspection and acceptance will occur at the origin, with the contractor maintaining primary responsibility for quality assurance and record retention for 365 days following final delivery. The procurement mandates the use of PIEE-WAWF for electronic submission of invoices and receiving reports. Offerors who are not the original equipment manufacturer must identify the OEM and, if acting as a distributor, provide signed proof of authorization on company letterhead. Additionally, any hazardous materials delivered under this contract require the submission of GHS-compliant labels and Safety Data Sheets to NAVSUP WS Code N242 prior to award. The solicitation also incorporates the Federal Acquisition Supply Chain Security Act prohibitions and requires offerors to certify their tax liability and criminal conviction status.
Electronic Connector Manufacturing

POSTED

2 days ago

DEADLINE

in 13 days
View Details
NAICS: 334412
New
Federal
OSCILLOSCOPE
Solicitation # SPRMM126QHD57
Solicitation SPRMM1-26-Q-HD57, issued by DLA Mechanicsburg, is a small business set-aside request for the manufacture and delivery of an oscilloscope, NSN 6625-01-716-1472. The required item must conform to the design represented by Cage Code 82199, reference number MXO4-B2410, and Technical Data Package version O04. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) criteria, with technical acceptability defined as full compliance with solicitation instructions and no exceptions taken to the terms. The procurement is being conducted under FAR Part 18 Emergency Acquisition Flexibilities. The contractor is responsible for all inspection and acceptance at the point of origin, with records maintained for 365 days post-delivery. Packaging must adhere to MIL-STD-2073-1, with specific requirements for domestic and overseas shipments, and physical identification must comply with MIL-STD-130, Rev N. All invoicing and receiving reports must be submitted electronically via the PIEE-WAWF system. Offerors who are not the original equipment manufacturer must identify the OEM, their CAGE code, and the specific part number being offered. The final deadline for the receipt of offers is October 30, 2026, at 4:30 PM local time.
Bare Printed Circuit Board Manufacturing

POSTED

2 days ago

DEADLINE

in 3 days
View Details
NAICS: 332919
New
Federal
VALVE,SAFETY RELIEF
Solicitation # SPRMM126QGG52
This solicitation, issued by DLA Mechanicsburg, is a total small business set-aside for the manufacture of safety relief valves for the MK-91 MOD-3 (GMFCS) NATO. Award will be determined based on the Lowest Price Technically Acceptable (LPTA) criteria. The procurement mandates higher-level inspection and requires the finished products to meet the design specifications represented by Cage Codes 4J831 and 71905, specifically referencing drawing 2888350. All items must be physically identified per MIL-STD-130, Rev N, and packaged according to MIL-STD-2073. The contract imposes rigorous quality assurance requirements, including the submission of test procedures for government approval via DD Form 1423 prior to production. The contractor must perform a non-destructive First Article Test on one unit and conduct 100 percent production lot testing. Inspection and acceptance will occur at the origin. Administrative requirements include the electronic submission of invoices and receiving reports through PIEE-WAWF and the mandatory identification of the Original Equipment Manufacturer (OEM) and their CAGE code for any offerors acting as distributors.
Other Metal Valve and Pipe Fitting Manufacturing

POSTED

2 days ago

DEADLINE

in 20 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 238160
Closed
Federal
Roofing Systems Installation
Mp-Regional Office

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
Federal
Roofing and Waterproofing Services
W6QM Micc-Fdo Ft Sam Houston

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
Federal
New TPO Roofing System Installation
Base PORTSMOUTH(00027)

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
Federal
Roofing System Installation
W6QM Micc-Ft Knox

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Awarded
Federal
Z--REPLACE ROOFS AND VENTS FORT CRONKHITE, GOGA
Solicitation # 140P8626R0002
Pwr GOGA(86000)

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 238160
Awarded
Federal
Z--Roof Replacement National Weather Service (NWS) We
Solicitation # 1305M326Q0290
Department Of Commerce Noaa

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 238160
Awarded
Federal
Z--HSTR GW and FW Roof Replacement
Solicitation # 140P6026Q0046
Mwr Midwest REGION(60000)

POSTED

2 months ago

DEADLINE

N/A
View Details
NAICS: 238160
Awarded
Federal
Birch Creek Roofing Replacement
Solicitation # 1240LT26Q0117
Csa Intermountain 8 Usda-Fs

POSTED

2 months ago

CLOSED

2 months ago
View Details
NAICS: 238160
Closed
Federal
B101 and B136 Roof Repairs
Solicitation # W50S8S26QA012
W7NU Uspfo Activity Ohang 180

POSTED

2 months ago

CLOSED

about 2 months ago
View Details
NAICS: 238160
Closed
DIBBS
Roofing System Installation
ASC SUPPLIER OPER AE AND AF DIV

POSTED

2 months ago

CLOSED

2 months ago
View Details
NAICS: 238160
Closed
DIBBS
Roofing System Installation
ASC COMMODITIES DIVISION

POSTED

2 months ago

CLOSED

2 months ago
View Details
NAICS: 238160
DIBBS
Roofing System Installation
Defense Logistics Agency

POSTED

2 months ago

DEADLINE

N/A
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS