Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Rotor Pole and Field Winding Inspection and Refurbishment

Active

Federal

Response Deadline09/08/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails comprehensive inspection, cleaning, testing, and refurbishment of rotor pole assemblies and field windings across all three generating units, with specific focus on insulation integrity assessments and precise reassembly alignment to ensure optimal operational performance. All work must meet rigorous technical standards to maintain the reliability and efficiency of the generating assets, requiring skilled labor and specialized equipment for handling high-voltage electrical components. The scope demands thorough documentation of findings and repairs, ensuring compliance with industry and military-grade maintenance protocols. Awarded as a subcontract under the Department of Defense’s W076 Endist Tulsa agency, the opportunity is classified under NAICS code 811310 and has a response deadline of September 8, 2026, with proposals due by 7:00 PM. The place of performance is designated as location 24568, though specific city or state details are not provided. Interested parties must submit their responses by the stated deadline to be considered, with no set-aside provisions indicated. The solicitation was posted on August 6, 2026, and can be accessed through the official SAM.gov portal.

General Info

Inspection, cleaning, testing, and refurbishment of rotor pole assemblies and field windings for three generating units under DoD contract.

Agency

Department Of Defense → W076 Endist TulsaView Agency

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and MaintenanceView NAICS

Place of Performance

24568, OK, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 6

subcontract

Response DeadlineSep 8

Submission deadline

Response Deadline

09/08/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W076 Endist Tulsa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → W076 Endist Tulsa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Inspection, cleaning, testing, and refurbishment of rotor pole assemblies and field windings on all three generating units, including insulation checks and reassembly alignment.

Similar Contracts

Same NAICS industry code

363-27 District 2 Electrical Maintenance

Solicitation # SRC0000041115

The contract titled 363-27 District 2 Electrical Maintenance is a solicitation issued by the Ohio Department of Transportation, District 2, for the provision of electrical equipment maintenance and repair services. It was posted on August 7, 2026, with a response deadline of August 27, 2026, at 5:00 PM. The services are to be performed within the state of Ohio and are intended to support the ongoing operational needs of transportation infrastructure under the jurisdiction of District 2. This solicitation is categorized under SLED, indicating it is targeted toward state, local, or educational entities, and no specific set-aside or NAICS code is designated, leaving eligibility open to qualified contractors without restriction based on small business or other program categories. All proposals must be submitted through the Ohio Buys portal before the deadline to be considered for award.

Odot-district 2, Dot-dept Of Transportation

POSTED

about 16 hours ago

DEADLINE

Equipment Maintenance and Refueling ServicesThe contract entails ongoing maintenance, refueling, and recovery services for all heavy equipment rented during the performance period, ensuring continuous operational readiness and support. Services are required to be performed at the designated place of performance in Cristobal and are intended to sustain the functionality and availability of equipment under contract. The work is classified under NAICS code 811310, which pertains to mechanical repair and maintenance activities, and the contract is structured as a subcontract within the Department of Defense procurement framework. The solicitation was posted on August 7, 2026, with a response deadline of August 20, 2026, at 4:00 p.m. The contracting office is identified as 0410 Aq Hq Contract under the Department of Defense, though specific contact information and detailed agency office details are not provided. All bidders must be prepared to meet service requirements without specified set-aside classifications, and the contract will be managed through the SAM.gov platform with the designated UI link for further submission and reference.

0410 Aq Hq Contract

POSTED

about 17 hours ago

DEADLINE

Emergency DME Repair Services (24/7)The contract is for emergency repair services on critical DME equipment outside normal business hours, requiring rapid diagnostics and either on-site or mobile response capabilities. It is a subcontract under a Small Business Set Aside designation, limiting eligibility to qualified small businesses as defined by the SBA. The North American Industry Classification System code 811310 applies, indicating the work falls within medical and dental equipment repair and maintenance. The services must be available 24 hours a day, seven days a week, to ensure uninterrupted operation of vital medical devices for the Department of Veterans Affairs. Performance is designated for Pittsburgh, Pennsylvania, with a zip code of 15215, and the solicitation was posted on August 7, 2026, with responses due by September 8, 2026. The contracting office is the 244-NETWORK Contract Office 4 under the Department of Veterans Affairs, though no specific point of contact or detailed address information is provided.

244-NETWORK Contract Office 4 (36C244)

POSTED

about 17 hours ago

DEADLINE

in about 1 month

DME Repair & Maintenance ServicesThe contract seeks qualified small businesses to provide repair and maintenance services for wheelchairs and other durable medical equipment, ensuring all items are restored to first-class condition through thorough cleaning, functional testing, and recertification for safe reuse. The work must meet stringent standards to guarantee equipment reliability and patient safety, with all repairs performed in accordance with established medical device protocols. This is a Small Business Set Aside under NAICS code 811310, exclusively available to businesses certified as small by the SBA. Performance is required at a designated location in Pittsburgh with a zip code of 15215, and responses must be submitted by September 8, 2026. The contract is administered by the Department of Veterans Affairs through its 244-NETWORK Contract Office 4, and while no specific point of contact is listed, interested parties can access additional details via the provided SAM.gov link. The solicitation is structured as a subcontract, indicating it may be awarded as part of a larger federal procurement initiative, with the expectation that successful vendors will deliver consistent, high-quality service to support veteran healthcare needs.

244-NETWORK Contract Office 4 (36C244)

POSTED

about 17 hours ago

DEADLINE

in about 1 month

Technical Support and Commissioning ServicesThe contract encompasses on-site installation support, commissioning, and training services for ship engineers aboard the USNS COMFORT, specifically focused on the operation and maintenance of Edro laundry units. Technical personnel will be required to deploy to the vessel to oversee the proper setup, functional verification, and handover of the equipment, ensuring full operational readiness. Comprehensive training will be provided to the ship’s engineering crew to enable them to independently perform routine operation, preventive maintenance, troubleshooting, and minor repairs of the laundry systems in accordance with manufacturer specifications and naval operational standards. This subcontract, issued under NAICS code 811310 and managed by the Department of Defense through Mschq Norfolk, mandates timely execution with a response deadline of August 12, 2026. Performance is to be completed at the vessel’s designated location, identified by the address code 53470, and must align with the specific technical and safety requirements of a U.S. Navy hospital ship environment. The scope emphasizes hands-on, practical instruction tailored to military personnel, ensuring sustained mission capability without reliance on external technical support after commissioning.

POSTED

about 17 hours ago

DEADLINE

Equipment Integration, Testing, and DeliveryThe contract involves the final assembly, hydraulic and PTO integration, operational testing, and delivery of a complete equipment package to Byron, Georgia, with requirements for on-site setup and verification to ensure full functionality. All work must be completed and validated at the specified delivery location, emphasizing precision in integration and rigorous testing to meet operational standards. The procurement is structured as a subcontract under NAICS code 811310, associated with the USDA ARS AFM APD agency, and targets a specific technical scope requiring specialized expertise in equipment integration and field deployment. Responses to this solicitation are due by August 17, 2026, at 7:00 PM, with the posting date listed as August 7, 2026. The place of performance is strictly limited to Byron, GA, with a zip code of 31008, and no alternative delivery or setup locations are authorized. While no set-aside type or point of contact is provided, the nature of the work implies a need for qualified subcontractors with demonstrated capabilities in agricultural equipment systems, hydraulic integration, and post-installation verification under field conditions. Failure to meet the specified integration and testing criteria may result in rejection or non-compliance.

USDA Ars Afm Apd

POSTED

about 17 hours ago

DEADLINE

BATTERY PREVENTATIVE MAINTENANCE (BPM), MHE PREVENTATIVE AND CORRECTIVE MAINTENANCE SERVICES FOR DLA DISTRIBUTION NORFOLK, VA (DDNV)

Solicitation # SP330026Q0194

The contract solicits comprehensive preventative and corrective maintenance services for material handling equipment (MHE) and battery preventative maintenance (BPM) at the Department of Defense’s DLA Distribution Norfolk, Virginia facility. The effort is designated as a total small business set-aside under FAR 19.5, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 811310 for industrial and commercial machinery and equipment repair and maintenance. Work performance is focused entirely in Norfolk, Virginia, with the contracting office located in New Cumberland, Pennsylvania. All responses must be submitted by August 14, 2026, at 5:00 PM Eastern Time, following a solicitation issued on July 15, 2026. The primary point of contact is Brian Keckler, reachable via phone or email, and the solicitation is published on SAM.gov under number SP330026Q0194.

DLA Distribution

POSTED

about 17 hours ago

DEADLINE

16--ACTUATOR,ELECTROMEC, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QFB12

The contract solicitation pertains to the repair or modification of an electromechanical actuator identified by NSN 7R-1680-016891302-H5, with a quantity of four units required. The technical documentation reference is TDP VER 001 and the reference number is 06391-05801-106, indicating specific engineering and procedural guidelines for the work. Delivery is mandated under FOB origin terms, meaning the responsibility for transportation and associated costs shifts to the buyer upon shipment from the seller’s location. The solicitation is issued under N0038326QFB12 by the Naval Supply Systems Command Weapon Systems Support, under the Department of Defense, and is posted as a presolicitation with a response deadline of September 21, 2026. The contracting office is located in Philadelphia, Pennsylvania, and the primary point of contact is Taylor M. O’Connor, reachable via email or phone for official inquiries related to the requirement. No set aside type has been designated, and the NAICS code is not specified, suggesting the opportunity remains open to all eligible contractors without socioeconomic preferences.

Navsup Weapon Systems Support

POSTED

about 17 hours ago

DEADLINE

in about 1 month

REMOVE AND REPLACE THE EXISTING MOTOR FAN DRIVE SHAFT BEARINGS (5 EACH)

Solicitation # 70Z02426Q0000166

Contractor is required to remove and replace five existing motor fan drive shaft bearings at USCG Base Boston in Massachusetts, furnishing all labor, materials, equipment, and supervision necessary to complete the work per the attached Scope of Work. The submission must include a firm fixed price quote with a detailed breakdown of costs and the lead time for parts, along with a completed SF18 form. The contract is subject to the Service Contract Labor Standards under FAR 52.222-41, ensuring compliance with prevailing wage and benefits requirements. The NAICS code is 811310 with a size standard of $12.5 million, and the PSC code is J031. The solicitation number is 70Z02426Q0000166, posted on August 7, 2026, with responses due by August 12, 2026, at 9:00 PM ET. No set aside is applied, and the contracting office is part of the Department of Homeland Security, specifically USCG Base Boston. Primary point of contact is Beverly A. Primm, with secondary contact Peter Psanis, both reachable via provided phone numbers and email addresses for inquiries or submissions.

Base BOSTON(00024)

POSTED

about 17 hours ago

DEADLINE

49--28007 EBFD PP AUTOMATIC GREASING SYSTEM

Solicitation # 140R4026Q0086

The contract solicitation 140R4026Q0086/0001, issued by the Bureau of Reclamation’s Upper Colorado Regional Office for an automatic greasing system at Elephant Butte Dam in New Mexico, seeks a firm fixed price solution for the installation of three systems servicing 330 lubrication points across turbine units during the restricted maintenance season from October 15 to February 15. Each system must be fully integrated with existing infrastructure, compatible with VSG Green grease, and equipped with automated controls capable of weekly and monthly lubrication cycles with manual override, alarm outputs, and shutoff valves. The contractor must demonstrate a minimum of five prior installations of wicket gate greasing systems, providing verifiable customer references, and must designate a certified safety representative trained in lockout/tagout procedures who will be present for all hazardous operations. All work must comply with OSHA, NEC70E, NFPA, and Reclamation Safety and Health Standards, with electrical power infrastructure—including 230VAC cabling, breakers, and disconnects—provided entirely by the contractor, as only 120VAC is available on-site. The solicitation mandates extensive documentation including as-built drawings in .dwg format, a commissioning plan, parts lists, warranty information, and previous experience records. Delivery is FOB destination at Elephant Butte Dam, with performance beginning September 1, 2026, and ending February 15, 2027. Payment must be submitted via the Treasury’s Invoice Processing Platform, requiring electronic submission with a signed copy emailed to Samantha Colt prior to IPP submission; reimbursement is tied to successful commissioning and acceptance at the worksite. Contractors must obtain all required permits through EBFD operations, manage waste disposal at their own expense, and adhere to strict aesthetic and safety labeling standards, including MIL-STD-129 for any radioactive components. Offerors must maintain active SAM registration with valid UEI and CAGE codes, self-certify small business status under NAICS 811310 with a $12.5 million size standard, and disclose any adverse legal or contractual history per FAR 52.209-7. Special requirements include prohibitions on contractor access to EBFD equipment, no on-site housing, and compliance with EPA BioPreferred guidelines. The evaluation prioritizes technical acceptability over price, with the lowest technically acceptable offer likely to be selected, though no formal LPTA

Upper Colorado Regional Office

POSTED

about 17 hours ago

DEADLINE

61--MOTOR,ALTERNATING C, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QMA92

The contract solicitation pertains to the repair or modification of an alternating current motor, identified by NSN 7R-6105-008807012-EK, with a quantity of 14 units required. Technical Data Package Version 011 governs the specifications, and delivery terms are set at FOB origin, meaning the contractor is responsible for loading the items at their location and transportation costs begin after that point. The solicitation, issued under N0038326QMA92, was posted on August 7, 2026, with responses due by September 22, 2026, at 04:00 UTC. It is classified as a presolicitation, indicating it is an early-stage notice to gauge industry interest before formal procurement begins, and no set-aside provisions are identified. The contracting activity is the Naval Supply Systems Command Weapon Systems Support, operating under the Department of Defense, with the office located in Philadelphia, Pennsylvania, zip code 19111-5098. Primary point of contact is Ethan T. Stein, reachable via email at ETHAN.T.STEIN.CIV@US.NAVY.MIL or by phone at (215) 697-2983. The place of performance is unspecified, and the official solicitation can be viewed on SAM.gov through the provided link.

Navsup Weapon Systems Support

POSTED

about 17 hours ago

DEADLINE

in about 1 month

16--GEARBOX ASSEMBLY,AI, IN REPAIR/MODIFICATION OF

Solicitation # N0038326QFB14

The contract solicitation pertains to the repair or modification of a gearbox assembly identified by NSN 7R-1680-016926171-H5, with a single unit required and delivery terms set at FOB origin. It is part of a presolicitation notice issued under solicitation number N0038326QFB14, published on August 7, 2026, with responses due by September 21, 2026. The procurement is managed by the Naval Supply Systems Command Weapon Systems Support under the Department of Defense, with the office located in Philadelphia, Pennsylvania. The primary point of contact is Taylor M. OConnor, reachable via email or phone for inquiries regarding requirements or submission procedures. No set-aside classification or NAICS code is specified, indicating the opportunity is open to all eligible contractors. The place of performance has not been defined, and all deliverables must be shipped from the supplier’s location.

Navsup Weapon Systems Support

POSTED

about 17 hours ago

DEADLINE

in about 1 month

More opportunities from Department Of Defense → W076 Endist Tulsa

Same awarding agency

IFPC/M-SHORAD Instructional Facility

Solicitation # W912BV27SSH01

The U.S. Army is moving forward with the development of a new instructional facility at Fort Sill, Oklahoma, designed to train soldiers on the operation and maintenance of the Indirect Fire Protection Capability and the Maneuver-Short Range Air Defense systems. This facility is a strategic asset aimed at advancing the Army’s air defense readiness by producing highly skilled operators and maintainers capable of ensuring airspace dominance and protecting ground forces against evolving aerial threats. The project supports the broader goal of fielding one Divisional Air Defense Battalion per division, emphasizing hands-on, realistic training to rapidly prepare soldiers for global deployment. To accelerate delivery and optimize costs, the government is pursuing non-traditional procurement methods beyond standard federal acquisition regulations, seeking industry input on the most effective project delivery models such as Progressive Design-Build, Design-Build to Budget, or Construction Manager at Risk. The solicitation, identified as W912BV27SSH01, is open for market research responses through August 28, 2026, with submissions directed to Julie S. Hill and Daniel Foyil of the U.S. Army Corps of Engineers. The project falls under NAICS code 236220 and is managed by the Office of Endis Tulsa, with construction to take place at Fort Sill. Industry stakeholders are encouraged to engage early to help shape the procurement strategy and ensure the timely fielding of this critical infrastructure.

Commercial and Institutional Building Construction

POSTED

about 17 hours ago

DEADLINE

Helping Agencies Phase 3, Tinker AFB, OK

Solicitation # W912BV26RA031

The U.S. Army Corps of Engineers, Tulsa District, intends to award a sole-source contract to Cape Fox Expeditionary for Phase 3 work at Building 1 on Tinker Air Force Base in Oklahoma, under the Revolutionary FAR Overhaul authority. This contract will require comprehensive design and engineering services, along with all materials, labor, equipment, and quality control necessary to install humidity control systems and repair interior administrative spaces. The work builds directly on existing Phase 1 and Phase 2 contracts already being performed by Cape Fox, justifying the sole-source approach. The contract will be issued on a Firm Fixed Price basis, with the North American Industry Classification System code 236220 and an 8(a) Sole Source set-aside designation under the small business size standard of $45 million. Interested parties must submit documentation demonstrating their technical capability to meet the requirements by 3:00 p.m. CT on August 7, 2026, to the identified Contract Specialist. This notice serves only as an informational solicitation and is not a request for competitive proposals; responses will be evaluated solely to determine whether a competitive procurement is warranted. The government retains full discretion to proceed without competition based on the submissions received. The contract, identified by solicitation number W912BV26RA031, will be administered by the Tulsa District of the Corps of Engineers, with primary point of contact Cheyenne Redemann, and performance location in Midwest City, Oklahoma.

Commercial and Institutional Building Construction

POSTED

about 17 hours ago

DEADLINE

Bearing Refurbishment and Alignment ServicesThe contract encompasses the disassembly, inspection, refurbishment, and precision alignment of generator and turbine bearings during reassembly, requiring detailed technical expertise to ensure optimal performance and longevity of critical rotating equipment. Work must be performed to exacting standards with emphasis on dimensional accuracy, surface finish, and mechanical integrity throughout each phase of the process. The effort is classified as a subcontract under NAICS code 811310 and is solicited by the Department of Defense through its W076 Endist Tulsa office, with performance anticipated at the location identified by the city code 24568. All work must be completed within the specified timeframe, with proposals due by September 8, 2026, at 7:00 PM, and the opportunity was posted on August 6, 2026. There is no set-aside designation or additional eligibility criteria outlined, and the contract does not provide point of contact information through the public posting.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Field Lead Reinsulation and Electrical Insulation ServicesThe contract covers the reinsulation of field leads and high-voltage components, requiring the complete removal of existing insulation and the application of new dielectric materials to restore electrical integrity. The work involves precise handling of high-voltage systems and includes comprehensive testing to ensure compliance with safety and performance standards. Services must be performed in accordance with industry best practices for electrical insulation remediation, with an emphasis on reliability and long-term durability under operational conditions. The place of performance is designated as location 24568, and the work is to be executed under a subcontract arrangement. Issued by the Department of Defense under the agency name W076 Endist Tulsa, this opportunity falls under NAICS code 811310, which pertains to repair and maintenance services for electrical equipment. The solicitation was posted on August 6, 2026, with a response deadline of September 8, 2026, at 7:00 PM. Interested parties must submit proposals by the stated deadline, and while no set-aside classification or point of contact is provided, all submissions must align with the technical requirements outlined for the reinsulation process and associated electrical testing protocols.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Machine Condition Monitoring (MCM) System InstallationThe contract calls for the supply, installation, and commissioning of a Machine Condition Monitoring (MCM) system, encompassing sensors, data acquisition hardware, and seamless integration with existing plant control systems. The scope requires full lifecycle support from deployment to operational readiness, ensuring real-time monitoring capabilities are fully functional within the facility’s infrastructure. All components must meet stringent reliability and performance standards to support continuous industrial operations without disruption. The contract is classified as a subcontract under NAICS code 334511, issued by the Department of Defense through the W076 Endist Tulsa office, with performance required at a location identified by the city code 24568. The solicitation was posted on August 6, 2026, and submissions are due by September 8, 2026, at 7:00 PM. There is no set-aside designation, and no point of contact is listed, indicating bidders must rely solely on the public posting for submission guidelines and requirements.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

DEADLINE

in about 1 month

Hydroelectric Generator Stator Rewinding and Core ReplacementThe contract entails the complete design, manufacture, testing, and installation of new stator coils and core laminations for Unit 1 of a hydroelectric generator, encompassing the full replacement of the stator winding and upgrades to the clamping system to ensure operational integrity and efficiency. This scope requires precision engineering and rigorous quality control throughout every phase, from fabrication to on-site commissioning, with all work tailored to meet the performance and safety standards of heavy-duty hydroelectric infrastructure. The contract, titled Hydroelectric Generator Stator Rewinding and Core Replacement, was posted on August 6, 2026, with a response deadline of September 8, 2026, and is classified as a subcontract under NAICS code 335313 for Electric Motor, Generator, and Transformer Manufacturing. It is associated with the Department of Defense through its agency W076 Endist Tulsa and requires performance at a location identified only by the city code 24568. No set-aside provisions or point of contact details are specified, and all submissions must align with the technical and contractual requirements defined in the solicitation.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

DEADLINE

in about 1 month

Eufaula Powerhouse Hydroelectric Generator Rewind

Solicitation # CY103

The U.S. Army Corps of Engineers, through its Tulsa district office under the Department of Defense, is seeking information from qualified vendors regarding the rewind of the hydroelectric generator at the Eufaula Powerhouse. This sources sought notice, identified by solicitation number CY103 and issued on August 6, 2026, aims to gather market insight to determine the availability of capable contractors for this specialized infrastructure project. The work, classified under NAICS code 237990 for other construction support activities, will be performed at the Eufaula Powerhouse in Oklahoma, and responses must be submitted by September 8, 2026, at 7:00 PM Eastern Time. Interested parties should direct inquiries to Clinton Yandell, the primary point of contact, or Dario Rissone, the secondary contact, both reachable via email or phone through the Corps of Engineers. The notice does not constitute a request for proposal or a commitment to award a contract, and no set-aside preferences are indicated for small businesses or other categories.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

in about 1 month

Midwest City Water Tower

Solicitation # W912BV26RA027

The U.S. Army Corps of Engineers Tulsa District is soliciting bids for the construction of a 500,000-gallon elevated storage tank and a high-service pump station in Midwest City, Oklahoma, under solicitation W912BV26RA027. The project, classified under NAICS code 237110, involves building new water infrastructure to enhance pressure in the southeastern distribution system, including approximately 650 linear feet of 12-inch ductile iron pipe, reconfiguration of existing 18-inch and 16-inch piping at the Titan Tower Tank site, and modifications at 15th Street and Westminster Road. All work must comply with erosion and sediment control standards, stormwater permitting requirements, and applicable federal, state, and local codes. The estimated contract value ranges from $10 million to $25 million, with a projected performance period of 450 calendar days. The solicitation is restricted to firm-fixed price contracts awarded using the Lowest Price Technically Acceptable approach, with no tradeoffs permitted between cost and technical merit. A pre-bid site visit was conducted on July 22, 2026, and the attendee list is available in the attachments. Proposals are due by August 6, 2026, and the procurement is unrestricted, open to all business sizes with no socioeconomic set-asides. The place of performance is exclusively in Midwest City, Oklahoma, and all deliveries and construction activities must occur on-site. Contract administration is managed by the Tulsa District with primary point of contact Tyler Godwin, and additional points of contact include Justin Hodd, Robert Clancy, and Midwest City representatives Corrie Evenson, Koren Steele, Matt Thomas, and Dan Cole. Payment will be processed through the U.S. Army Corps of Engineers Tulsa District using agency code W912BV, and invoicing is expected to follow standard DOD Wide Area Workflow procedures. No specific packaging, marking, inspection criteria, or special contract requirements like security clearances or key personnel qualifications are detailed in the pre-solicitation materials, and Section K representations and certifications will be provided in the formal solicitation document.

Water and Sewer Line and Related Structures Construction

POSTED

DEADLINE

15kV Switchgear & Station Service Replacement at Lake Tenkiller, OK

Solicitation # W912BV26RA032

The U.S. Army Corps of Engineers – Tulsa District is preparing to solicit a contract for the replacement of 15kV switchgear and station service systems at Lake Tenkiller, Oklahoma, with an estimated construction value between five and ten million dollars. This pre-solicitation notice outlines a design-bid-build project that will be awarded as a Small Business Set-Aside under FAR 19.5 using the Lowest Price Technically Acceptable evaluation method, with no tradeoffs permitted. The scope includes full removal and replacement of aging electrical infrastructure such as 15kV switchgear, station service transformers, 480V switchgear, asbestos-containing cable trays, and associated cabling, along with installation of new front-accessible double-ended 480V switchgear, high-resistance grounded wye transformers, new 15kV cables and potheads, updated control and annunciation wiring, modified protective relay settings, automatic transfer functionality, arc flash mitigation switches, and relocation of the lighting transformer. The project will require reconfiguration of the diesel generator to a wye-grounded system with high-resistance grounding. The contract is classified under NAICS code 238210, with a small business size standard of $19 million, and falls under the Product Service Code Y1NZ for construction of other utilities. The anticipated solicitation is scheduled for issuance on or about July 20, 2026, with proposals due on or about August 19, 2026. The estimated construction duration is 900 calendar days, and performance will take place at Paradise Hill, Oklahoma. All questions and correspondence should be directed to the primary point of contact, Tyler Godwin, or the secondary contact, Dario Rissone, at the Tulsa District office. This pre-solicitation notice serves only to gather industry input and does not constitute a request for proposals or guarantee of contract award; no reimbursement will be provided for costs incurred in responding to this notice.

Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 1 month ago

DEADLINE

Cancellation Notice - Architect-Engineer (A-E) for Environmental National Environmental Policy Act (NEPA) SERVICES

Solicitation # W912BV25R0006

The U.S. Army Corps of Engineers Tulsa District, acting on behalf of the Southwestern Division’s Regional Planning and Environmental Planning Center, has issued a cancellation notice for Sources Sought Announcement W912BV-25-R-0006, which sought to establish an indefinite delivery contract for Architect-Engineer services focused on Environmental National Environmental Policy Act (NEPA) compliance. The initiative aimed to secure qualified firms to provide NEPA-related environmental planning and analysis services across the Southwestern Division’s area of responsibility, including Texas, Oklahoma, Louisiana, Arkansas, and southern Kansas, as well as any additional assigned projects. The solicitation was intended to support both military and civil works missions within this region by ensuring timely and compliant environmental reviews. The cancellation was announced on May 14, 2026, under the NAICS code 541330 for Engineering Services, with no set-aside designation specified. The contracting office is located in Tulsa, Oklahoma, and primary points of contact are Sharon Newsome and Robert Reed, who can be reached via phone and email for further inquiries. Although the original solicitation sought to establish a long-term procurement mechanism for ongoing environmental services, this specific effort has been withdrawn without replacement or resolicitation indicated. All interested parties are advised that no further action will be taken under this announcement, and future opportunities may be released separately.

Engineering Services

POSTED

DEADLINE

Fabricated Tainter Gate Components Supply

Metal Tank (Heavy Gauge) Manufacturing

POSTED

DEADLINE

Non-Destructive Testing (NDT) and Inspection

Building Inspection Services

POSTED

DEADLINE