Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Shipboard Safety Control Integration

Active

Federal

Response Deadline10/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The Shipboard Safety Control Integration subcontract involves performing critical safety control modifications for prime contractors on DLA naval equipment contracts. The primary scope of work is the installation of manually operated, two-handed control systems on commercial laundry presses to ensure full compliance with NSTM 655 2.6.1G naval safety standards. The project requires the delivery of a safety-certified control interface that is electrically compatible with 440V/60Hz/3PH systems. Managed under the Department of Defense through Construction & Equipment Containers, this effort falls under NAICS code 811310. The place of performance is designated as FPO 96661. Interested parties must adhere to the timeline established by the posting date of October 14, 2026, with a response deadline set for October 26, 2026.

General Info

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

FPO, AP, 96661, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE8ED-27-T-0108.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

LAUNDRY PRESS, COMMERCI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 14

subcontract

Response DeadlineOct 26

Submission deadline

Response Deadline

10/26/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs safety control modifications for prime contractors on DLA naval equipment contracts. Installs manually operated, two-handed control systems on commercial laundry presses to meet NSTM 655 2.6.1G naval safety standards. Ensures electrical compatibility with 440V/60Hz/3PH systems. Delivers a safety-certified control interface.

Similar Contracts

Same NAICS industry code

Furnish Labor, Materials and Equipment to Repair

Solicitation # 245

The Jefferson Parish Government is soliciting bids under Bid Event No. 245 for the provision of labor, materials, tooling, and equipment to repair and inspect various cranes at the Bonnabel, Suburban, Elmwood, and Duncan Eastbank pump stations. The scope of work includes specific repairs such as installing ground buss and strobes, replacing resistor banks, rewinding hoist motors, and replacing bridge limit switches across several Shawbox, P&H, and Kranco cranes. All work must be completed within 180 calendar days from the date of the purchase order issuance and performed during standard operating hours of 7:00 a.m. to 5:00 p.m., Monday through Friday. The contractor is required to provide detailed inspection reports for each crane and submit firm written quotes for any additional repairs discovered during the process. The contract will be awarded to the lowest responsive and responsible bidder. Compliance requirements are stringent, requiring bidders to provide a notarized bid affidavit covering criminal history and employee status verification, as well as a corporate resolution proving the signatory's authority. Bidders must meet specific insurance minimums, including 1,000,000 dollars for Commercial General Liability and Business Automobile Liability, and 500,000 dollars for Worker's Compensation. All technical work must adhere to OSHA, CMAA, ANSI, and NEC standards, with a requirement that all crane components originate from a single major recognized brand from an OEM source that is a CMAA/HMI member.

Jefferson Parish Government

POSTED

about 8 hours ago

DEADLINE

in about 1 month

Press Brake Installation and TestingThis subcontract for the Texas A&M University System Space Collaboration Facility involves the professional installation and testing of a hydraulic press brake. The scope of work requires the contractor to perform mechanical installation, precision leveling, electrical connections, and comprehensive calibration using specialized testing tools to ensure the equipment is fully operational. The project must be completed and delivered by November 19, 2026. Interested parties should note that the solicitation was posted on October 14, 2026, with a response deadline of October 29, 2026. The work falls under NAICS code 811310 and is managed through the Texas A&M University procurement system.

Texas A&M University

POSTED

about 9 hours ago

DEADLINE

Overhead Hoist Maintenance and Emergency RepairThis small business set-aside subcontract, issued by the Department of Defense for the 316 Cons Pk, involves providing unscheduled routine and emergency repairs for electric and manual hoists at Andrews Air Force Base. The selected contractor will support prime contractors on Air Force facility projects by responding to service calls and utilizing OEM Operation and Maintenance manuals to ensure all hoist systems are fully repaired and operational. Qualified technicians must possess formal training in OSHA, ASME, ANSI, and DAFMAN 91-203 standards. This opportunity falls under NAICS code 811310, with a response deadline set for October 30, 2026.

FA2860 316 Cons Pk

POSTED

about 10 hours ago

DEADLINE

MTU Diesel Engine Field Overhaul and Technical SupportThe MTU Diesel Engine Field Overhaul and Technical Support subcontract involves providing specialized on-site technical support, diagnostics, and maintenance for MTU diesel engines supporting Naval Surface Warfare Center, Philadelphia Division projects. Key technical responsibilities include executing field diagnostics, vibration analysis, and borescope inspections utilizing heavy-lift rigging and MTU diagnostic software. The contractor is required to deliver comprehensive field service reports and documentation for all completed maintenance actions. Performance will take place in Philadelphia, Pennsylvania, and requires personnel to be MTU Certified Technicians. Due to the nature of the work on Navy piers, all staff must possess the necessary security clearances for site access. This opportunity is categorized under NAICS code 811310 and is managed under the Department of Defense.

Nswc Philadelphia Division

POSTED

about 10 hours ago

DEADLINE

Call for Solutions - Bavaria Area Commercial Refrigeration Services

Solicitation # HQC0102704

The Defense Commissary Agency is seeking innovative commercial solutions for refrigeration maintenance services at commissaries located in the Bavaria area, specifically in Grafenwoehr and Vilseck. This requirement, issued under solicitation HQC0102704 as a Commercial Solutions Opening, encompasses comprehensive preventative, unscheduled, and 24/7/365 emergency maintenance for commercial product refrigeration systems to ensure continuous operations and prevent inventory loss. The government is looking for a provider with proven expertise in commercial grocery settings who can offer rapid on-site emergency response and transparent fixed-price quoting and reporting procedures. The anticipated period of performance is for up to five years, potentially structured as a base period with one or more option periods. Awardees must ensure full compliance with German and European Union statutory requirements, as well as Department of War statutory, safety, and warranty standards. Interested vendors were required to submit a Phase 1 Solution Brief by October 14, 2026. Evaluation focuses on technical capabilities, alignment of the service model with government value-driven goals, and adherence to local commercial standards for preventative maintenance.

Defense Commissary Agency- Eur Area

POSTED

about 10 hours ago

DEADLINE

YUMA VMS MODERNIZATION

Solicitation # N3220527Q7017

Solicitation N3220527Q7017 is an Invitation for Bid issued by MSCHQ Norfolk for the YUMA EPF Video Management System (VMS) Upgrade. The project requires technical services to replace Video Management Servers VMS1 and VMS2 and upgrade the system to the Ocularis version currently installed on EPF-13 for the vessel EPF-8. Work will be performed at Lamberts Point in Norfolk, Virginia, with a performance period from November 16 to December 18, 2026. The scope includes utilizing Government Furnished Equipment for the upgrade, conducting comprehensive tests and inspections of the JSCE and JRSS systems to ensure hardware and software functionality, and providing on-site crew training on new operational procedures and view setups for JRSS/JSCE and JWICS systems. This acquisition is set aside for Women-Owned Small Businesses under NAICS code 811310. The contract is a Firm Fixed Price arrangement, and bidders must provide a detailed cost breakdown including labor hours, hourly rates, travel, and materials. Award is typically based on the lowest responsive and responsible bidder. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses, including Buy American and Service Contract Labor Standards. Responses are due by October 22, 2026.

POSTED

about 10 hours ago

DEADLINE

Overhead Hoist Maintenance Joint Base Andrews

Solicitation # SSNFA2860

The Department of Defense, through the 316 Cons Pk office, is issuing a sources sought notice for a small business set-aside contract to provide comprehensive maintenance, testing, and certification for overhead hoists and associated equipment at Joint Base Andrews and Davidsonville, Maryland. The scope of work requires the contractor to furnish all labor, transportation, equipment, and supervision for annual certified inspections and both routine and emergency service call repairs. All work must be performed by qualified technicians with formal training and must adhere to OSHA, ASME, ANSI, and DAFMAN 91-203 standards, as well as original equipment manufacturer specifications. Key deliverables include the submission of a Quality Control Plan within 15 calendar days of award and the provision of certification inspection certificates to the Contracting Officer's Representative within five business days of completion. For payment, the contractor must provide service tickets annotated by the COR and follow specific reimbursement protocols for parts, requiring a single invoice for items under 3,000 dollars and three competitive quotes for items exceeding that amount. Access to Joint Base Andrews requires the submission of detailed personnel and vehicle information, and strict adherence to installation security policies regarding prohibited weapons and controlled substances is mandatory.

FA2860 316 Cons Pk

POSTED

about 10 hours ago

DEADLINE

Motor Rotor Assembly Repair_Rev1

Solicitation # N3904026S3204

The Portsmouth Naval Shipyard is conducting market research via a sources sought notice to identify capable firms for a firm fixed price contract to inspect, report, repair, and test a Hansome Energy Systems A.C. motor rotor assembly. The primary technical requirement involves addressing damaged shaft impeller threads that exceed simple hand work repair. Work must be performed in accordance with Hansome Energy Systems drawing A-326-239 Rev C and Submarine Maintenance Standard 5320-081-045 Rev CHG-3. The contractor will be required to provide a condition trouble report, written test results, a work completion report, and a certificate of compliance. If repairs are not feasible, the contractor must provide a quote for a replacement motor shaft assembly. The project will be executed at the contractor's location, with the final delivery of materials to Kittery, Maine, by February 1, 2027, under FOB Destination terms. Access to OEM proprietary data and submarine maintenance standards is required. Interested organizations must provide their company details and a tailored capability statement to the primary point of contact, Alyssa Scarelli. This notice is for informational purposes only and does not constitute a solicitation or a commitment by the government to award a contract.

Portsmouth Naval Shipyard Gf

POSTED

about 10 hours ago

DEADLINE

in about 23 hours

Workshop Machinery and Hydraulic Systems TechnicianThis subcontract opportunity is for a Workshop Machinery and Hydraulic Systems Technician to support prime contractors on Durham County Council fleet projects. The selected provider will be responsible for the repair and maintenance of general workshop machinery, specifically focusing on hydraulic pumps, valves, and industrial metal containers. Additionally, the contractor must perform preventative maintenance on powered equipment support tools in accordance with CPV 50500000 standards to ensure all systems remain fully operational. The contract was posted on October 13, 2026, with a response deadline of November 17, 2026. Operating under NAICS code 811310, the project is managed by the Durham County Council. Interested parties can find further details through the official tender notice provided by the agency.

Durham County Council

POSTED

about 23 hours ago

DEADLINE

in about 1 month

MOT and DVSA ATF Lane Equipment SpecialistThis subcontract for the Durham County Council involves providing specialized maintenance, calibration, and repair services for vehicle testing equipment. The scope of work focuses on the calibration of emissions equipment, headlight testers, and brake testers, with a specific requirement to maintain the DVSA ATF lane located at the Meadowfield Depot. All services must strictly adhere to DVSA standards for MOT equipment calibration and ATF lane operations to ensure the delivery of certified, operational testing facilities. The opportunity is categorized under NAICS code 811310 and was posted on October 13, 2026. Interested parties must submit their responses by the deadline of November 17, 2026, at 12:00 PM. The primary objective of the contract is to ensure that all vehicle testing equipment used for fleet projects remains compliant and fully functional according to regulatory requirements.

Durham County Council

POSTED

about 23 hours ago

DEADLINE

in about 1 month

002468 - Contract for Fleet Equipment Maintenance and Potential Repair

Solicitation # OPEN20252200

Durham County Council is seeking a contractor for the ongoing maintenance, calibration, and potential repair of workshop equipment across four of its facilities. These workshops support a fleet of approximately 1,100 vehicles and 3,000 items of powered equipment, including MOT testing capabilities at all sites and a DVSA ATF lane at the Meadowfield Depot. Because the council operates 24/7 to support the community, the contractor must perform repairs and inspections at the earliest opportunity to minimize downtime and maximize the utilization of testing bays. The contract, identified by solicitation number OPEN20252200, has an estimated total value of 105,000 GBP excluding VAT. The initial performance period is scheduled from January 4, 2027, to January 3, 2030, with the possibility of two 12-month extensions extending the term to January 3, 2032. Award decisions will be based on a weighted evaluation consisting of a pricing schedule at 60 percent and responses to four technical questions at 10 percent each. Tenders must be submitted via the OPEN Portal by November 17, 2026, at 12:00pm.

Durham County Council

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Standby Generator Preventative Maintenance, Repairs and Testing Services

Solicitation # FIN2026-231Q

The City of Barrie is seeking quotations for the provision of comprehensive preventative maintenance, inspection, deficiency repairs, demand and emergency repair services, and testing for approximately twenty-eight standby generators located in the City of Barrie and the Township of Oro-Medonte. The scope of work includes annual, semi-annual, and quinquennial maintenance in accordance with CAN/CSA C282:19 standards, OEM recommendations, and TSSA and ESA standards. Key requirements include the ability to meet a 1 hour and 30 minute emergency response time, the provision of portable generators as temporary replacements, and the submission of detailed reporting for all inspections and repairs. All work must be witnessed by a City employee, and hazardous materials must comply with Ontario WHMIS and flammable liquids regulations. The contract is expected to be executed the week of December 14, 2026, with an initial term and the possibility of two additional one-year extensions. Award selection is based on a three-stage evaluation process consisting of mandatory submission requirements, a rated technical evaluation requiring a minimum score of 36.00 points, and pricing, which is weighted at 40 points. Qualified respondents must be a single legal entity and provide technicians certified as Truck and Coach Technicians (310T), Industrial or Construction Electricians (442A/309A), or EGSA Journeymen. Additionally, technicians must hold valid CSA Z462 Electrical Safety and Lockout/Tagout training. Selected suppliers must maintain general liability insurance of 2 million dollars per occurrence and 5 million dollars aggregate, as well as 2 million dollars in automobile liability insurance. A performance security deposit of 10 percent of the total contract value is required. Invoicing is to be submitted monthly via electronic funds transfer. All quotations must be submitted electronically through the Bidding System by November 10, 2026, at 2:00 PM local time.

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

MIL-STD-129 Compliant Packaging ServicesThis subcontract involves providing specialized packaging, marking, and labeling services for prime contractors fulfilling DLA supply contracts. The scope of work requires the packaging of five pressure tanks in strict accordance with ASTM D3951, marking and labeling per MIL-STD-129, and palletization following RP001 DLA Packaging Requirements for Procurement. The completed units are to be delivered to DLA Distribution New Cumberland. This effort is managed under the Department of Defense with a designated NAICS code of 488510, and the response deadline for the solicitation is October 26, 2026.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Pressure Tank Supplier (NSN 5430014979981)This subcontract through Construction and Equipment Containers involves the supply of five pressure tanks for prime contractors fulfilling Department of Defense DLA supply contracts. The specific requirement is for NSN 5430014979981, corresponding to Crane Carrier Company part number 313-0005. All units must be manufactured or sourced in strict accordance with the technical specifications outlined in the DLA Master List of Technical and Quality Requirements RA001, and additive manufacturing is strictly prohibited unless authorized by the ESA. The contract is categorized under NAICS code 332313 with performance taking place in New Cumberland. Delivery terms are established as FOB Origin. Interested parties should note the response deadline of October 26, 2026, to ensure compliance with the solicitation timeline.

Plate Work Manufacturing

POSTED

about 5 hours ago

DEADLINE

Cable Reel Supplier (NSN 8130-01-588-2485)This subcontract involves the manufacture or procurement of one cable reel for prime contractors supporting Department of Defense projects under DLA Troop Support. The supplier must ensure the product strictly adheres to NSN 8130-01-588-2485 specifications and complies with the DLA Master List of Technical and Quality Requirements. Quality control must be performed in accordance with MIL-STD-1916 or ASQ H1331, with packaging meeting ASTM D3951 and MIL-STD-129 standards. The completed cable reel is to be delivered FOB Origin to Albany, Georgia. This opportunity is categorized under NAICS code 332311 and is managed by Construction and Equipment Containers. Interested parties must respond by October 26, 2026.

Prefabricated Metal Building and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

Manufacturing and Supply of DISC, REEL (NSN 8130-01-172-1541)

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services is issued by Construction and Equipment Containers under the Department of Defense. The contractor is responsible for providing specialized packaging and palletization for prime contractors fulfilling DLA supply contracts, specifically focusing on the delivery of tanks secured on pallets and labeled for military transport. All work must be performed in New Cumberland, Pennsylvania, and must adhere to strict regulatory standards, including RP001, MIL-STD-129, ASTM D3951 for commercial packaging, and TQ requirement IP025/FED-STD-313 for hazardous materials. The opportunity was posted on October 14, 2026, with a response deadline of October 26, 2026. It falls under NAICS code 488510, covering freight transportation arrangement. Interested parties can find further details through the provided DIBBS solicitation link.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Rubber Liquid Storage Tank ManufacturingThis subcontract involves the manufacture of nine warranted rectangular rubber liquid storage tanks for Construction and Equipment Containers to support DLA supply contracts. The tanks must be fabricated according to part number 52-C-8247-1 for water storage and are designated as Critical Application Items. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 326111. The contractor is required to ensure all units feature identification marking in accordance with MIL-STD-130N and maintain strict compliance with the Buy American Act as specified in DFARS 252.225-7001. The solicitation was posted on October 14, 2026, with a response deadline of October 26, 2026.

Plastics Bag and Pouch Manufacturing

POSTED

about 5 hours ago

DEADLINE

Packaging Cushioning Material SupplierThis subcontract involves the supply of specialized packaging cushioning material for prime contractors working on Department of Defense projects under Construction and Equipment Containers. The supplier is required to provide eight units of material matching NSN 8145013533277, ensuring full compliance with MIL-STD-2073-1E and the DLA Packaging Requirements for Procurement RP001. The contract specifies a delivery timeline of 167 days with shipping terms set as FOB Origin. Performance for this requirement is centered in Tracy, California, under NAICS code 326150. Interested parties must have responded by the deadline of October 26, 2026.

Urethane and Other Foam Product (except Polystyrene) Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Raw Materials for Spider Welded AssemblyThis subcontract, managed by Construction & Equipment Containers for the Department of Defense, involves the supply of raw metal stock and shapes required for the Spider Welded Assembly. The provider is responsible for sourcing materials that strictly adhere to the technical specifications for NSN 3510-01-123-8877 and delivering these certified raw materials directly to the designated fabrication facility in Tracy, California. To ensure full compliance with material grade and domestic origin requirements, the contractor must provide comprehensive Mill Test Reports and Certificates of Conformance. This effort supports prime contractors operating under DLA Troop Support supply contracts, with the procurement falling under NAICS code 333310.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 5 hours ago

DEADLINE

Fabrication and Welding of Spider Welded AssembliesThis subcontract involves the fabrication and welding of Spider Welded Assemblies for prime contractors supporting DLA Troop Support supply contracts. The contractor is required to deliver 11 completed and warranted assemblies to DLA Distribution San Joaquin, ensuring all work adheres to NSN 3510-01-123-8877 and the DLA Technical and Quality Master List of Requirements. Strict adherence to MIL-STD-2073-1E and MIL-STD-129 is mandatory for packaging and marking, and the use of additive manufacturing is explicitly prohibited. Managed under the Department of Defense through Construction and Equipment Containers, the project falls under NAICS code 332999. Performance will take place in Tracy, California. Interested parties must note the response deadline of October 26, 2026, to be considered for this requirement.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

Flame Arrester, Vent Supply (NSN 5430-01-724-2662)This subcontract, issued by Construction & Equipment Containers for the Department of Defense, requires the manufacture or sourcing of one Flame Arrester Vent under NSN 5430-01-724-2662. The selected provider must ensure the component adheres to specific technical data and follows strict quality control measures, including sampling per MIL-STD-1916 or ASQ H1331 and marking in accordance with MIL-STD-129. Additionally, the contractor is responsible for providing Safety Data Sheets per 29 CFR 1910.1200 if any hazardous materials are involved in the production or delivery of the unit. The project falls under NAICS code 332912 and will be performed in Herlong. Interested parties must submit their responses by October 26, 2026. The final deliverable is a fully completed and inspected flame arrester unit that meets all specified military and safety standards for DLA supply contracts.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Hardigg/Pelican Shipping and Storage ContainersThis subcontract involves the supply of four specialized high-durability shipping and storage containers for prime contractors supporting Department of Defense DLA supply contracts. The required units must match NSN 8145-01-641-3213 and Part Number IM2600-X0000, adhering strictly to Hardigg or Pelican specifications. To ensure quality and compliance, all products must be packaged according to ASTM D3951 and marked in accordance with MIL-STD-129. Managed by Construction and Equipment Containers, the contract falls under NAICS code 339999 with the place of performance located in New Cumberland, Pennsylvania. The solicitation was posted on October 14, 2026, with a response deadline set for October 26, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 5 hours ago

DEADLINE

Commercial Laundry Press SupplyThis subcontract involves the supply of Model 53VANE commercial laundry presses to prime contractors supporting Department of Defense supply contracts for the USS BENFOLD DDG 65. The equipment must meet specific electrical requirements of 440V/60Hz/3-Phase and adhere to MIL-STD-129 and MIL-STD-2073-1E standards for packaging and marking to ensure suitability for naval shipboard use. The agreement specifies that the completed and warranted laundry presses are to be delivered FOB Destination. Managed under NAICS code 423850, the contract is associated with Construction and Equipment Containers and requires performance at FPO 96661.

Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS