This Combined Synopsis/Solicitation opportunity from Department Of Justice was posted on August 29, 2024. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Shrink Wrapper FOB Destination Virginia

Closed

SV160-24Federal

Submission Closed09/06/2024, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 333993

New

Federal

Vertrod Thermal Impulse Pneumatic Heat Sealer SupplierThis 8(a) sole source subcontract through the NASA Shared Services Center involves the procurement of two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for prime contractors operating at the NASA-Stennis Space Center. The required equipment must feature 48 inch seal lengths in both 3/8 inch and 1/2 inch widths, single side heater bars, and pneumatic low pressure jaw close safety systems. To meet operational standards, all machines must be compatible with ISO7 clean room environments. The supplier is responsible for delivering two fully configured and tested units, which include a 3 year limited warranty. This procurement falls under NAICS code 333993 and was posted on October 28, 2026, with a response deadline of November 2, 2026.

NASA Shared Services Center

POSTED

DEADLINE

Sealing Machines for CHOP Shop

Solicitation # 80NSSC26948111Q

NASA Shared Services Center is seeking to procure two Vertrod 48 PS Thermal Impulse Pneumatic Pivot Style Heat Sealer Machines for the Critical Hardware Operational Processing shop at the Stennis Space Center. These machines will be used to create airtight and watertight seals for poly and aclar bags containing fittings, seals, o-rings, and crush washers, with one unit designated for a general clean room and the other for a newly constructed ISO7 clean room. The required equipment must be made in the USA, feature 48-inch seal lengths with one machine at 3/8 inch width and one at 1/2 inch width, and include a pneumatic low-pressure jaw close safety system, safety switch indication lights, and a three-year limited warranty. This procurement is being conducted under NAICS code 333993 as a commercial item acquisition following FAR Part 12. NASA intends to award a sole source contract to Government Affairs Institute, Inc. under the authority of FAR 12.102(a) and FAR 19.8 as an 8(a) set-aside. Interested organizations must submit capability statements to the primary point of contact, McKenzie Hanson, by 3:00 p.m. CST on November 2, 2026, to determine if the procurement will be competed. All items are to be shipped to Building 9166 at the Stennis Space Center in Mississippi.

NASA Shared Services Center

POSTED

DEADLINE

Supply of Filler Opening Cap (NSN 5340016340030)This subcontract involves the sourcing or manufacture of a Filler Opening Cap, identified by NSN 5340016340030, to support prime contractors delivering for the DLA Weapons Support Land Supply Chain under the Department of Defense. The selected provider must ensure the component complies with the DLA Master List of Technical and Quality Requirements and adheres to RP001 DLA Packaging Requirements for Procurement. The scope of work requires the delivery of one physical unit to a specified destination in Chambersburg, Pennsylvania. This opportunity falls under NAICS code 333993, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Downhole Deployment Valve (DDV) Supply and InstallationThis subcontract involves the supply and installation of specialized Downhole Deployment Valves for prime contractors operating on Oil & Gas Development Company Limited projects in Pakistan. The scope of work includes deploying and setting valves at precise depths to isolate the wellbore or manage fluid flow during tool deployment, as well as the subsequent actuation and retrieval of these valves according to the established drilling program. To ensure operational safety and quality, all provided equipment must strictly adhere to API standards for downhole hardware. The primary objective of the contract is the delivery of fully installed and functional Downhole Deployment Valves. Interested parties must submit their responses by November 12, 2026.

Oil & Gas Development Company Limited (OGDCL)

POSTED

DEADLINE

Yellow Adhesive Supplier (NSN 8040-01-663-3917)This subcontract through the Defense Logistics Agency requires the supply of specialized yellow adhesive, identified by NSN 8040-01-663-3917, for prime contractors. The material must adhere to specifications for either Lockheed Martin P/N LMAML015F3/TU or 3M P/N 7000058946. Key requirements include a minimum extendable shelf life of 12 months and the provision of SDS and HCS labels in accordance with 29 CFR 1910.1200. The contract specifies the delivery of four 5.0-ounce units FOB Destination to Camp Lemonnier in Djibouti. All packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 standards. This procurement falls under NAICS code 333993, with a response deadline set for November 2, 2026.

Defense Logistics Agency

POSTED

DEADLINE

Purchase of Cardboard Baler

Solicitation # F2027043

Tarrant County is soliciting bids for the replacement of a cardboard baler at the Tarrant County Recycling Center under solicitation number F2027043. The project requires the awarded vendor to provide all labor and materials for the uninstallation and removal of the existing equipment and the installation of a new open-end automatic shear baler. Technical requirements for the new unit include an auto-tie system, a wire run-out sensor, a minimum total press weight of 25,350 pounds, a nominal hopper size of 30 by 30 inches, and a bale size of 30 inches wide by 40 inches deep with variable length. Safety features such as hinged access doors with safety interlocks for both the bale chamber and feed hopper are mandatory. Bidders must submit a vendor quote form, product specification sheets, warranty information, and oil and electrical system requirements. The contract will be awarded to the lowest bidder who meets all technical specifications and bids on all required items. All delivery costs, including labor, travel, fuel, freight, and the removal of current equipment, must be included in the installation pricing. Bidders must adhere to Tarrant County's General and Special Terms and Conditions, which include mandatory criminal background checks for personnel accessing county facilities and strict data security protocols for any IT-related solutions. The county also emphasizes its Historically Underutilized Businesses policy, targeting a 20 percent good faith goal for HUB participation. Invoices must be submitted to the Tarrant County Auditor's Office and reference a purchase order number, with payment typically issued within 30 days of receipt.

POSTED

DEADLINE

Biopharmaceutical Automated Fill Machine Isolator

Solicitation # 134-202627-001

Wilson Community College is soliciting proposals for the design, fabrication, and installation of an Automated Fill Machine Isolator unit for the Biomanufacturing Education and Skills Training (BEST) Center of Eastern North Carolina. The system will be integrated into simulated cleanrooms to provide a capstone training experience for students, focusing on manual aseptic processing and operator skill development rather than high-throughput production. The project encompasses multiple phases, including engineering and design, fabrication, Factory Acceptance Testing, onsite installation, commissioning, and final acceptance. While full GMP validation is not required, the equipment must meet OSHA standards and carry appropriate safety certifications from organizations such as ASME, UL, NEMA, or the American Gas Association. The contract is expected to be completed within one year of the effective date, with onsite installation anticipated after August 11, 2027. Payment is structured around milestone deliverables, with final payment contingent upon written acceptance by the BEST Center following successful inspection and training. Vendors must provide a comprehensive technical proposal, pricing, and certifications of financial condition, along with at least three customer references. The state also maintains an option for a maintenance agreement featuring two preventive safety inspections per year. Proposals are due by November 10, 2026, and will be evaluated based on a narrative consensus of strengths and weaknesses.

Wilson Community College

POSTED

DEADLINE

5600 Combo L’ Sealer and Tunnel Combination Machine SupplierThis subcontract agreement involves the supply of one 5600 Combo Fully Automatic L Sealer and Tunnel Combination Machine intended for prime contractors working on State of Ohio Department of Administrative Services projects. The equipment package includes a machine with a 19 by 14 by 6 inch seal area, a precision temperature control tunnel, a 36F 3 ft Flighted Infeed Conveyor, and a Model 18-12SW Flexible Skate-wheel Conveyor. All provided machinery must exceed OSHA safety standards and be delivered as a fully functional unit accompanied by a spare parts kit. The procurement is managed by the Das105000 General Services Division Lzrs under NAICS code 333993. The solicitation was posted on October 16, 2026, with a response deadline set for November 2, 2026.

Das105000 General Services Division Lzrs

POSTED

DEADLINE

5600 Combo, Fully Automatic L’ Sealer and Tunnel Combination Machine

Solicitation # SRC0000042083

The State of Ohio Department of Administrative Services is soliciting quotes for one 5600 Combo Fully Automatic L Sealer and Tunnel Combination Machine for use in Copy Center production. The equipment must feature a production speed of up to 30 packages per minute, a maximum seal area of 19 inches long by 14 inches wide by 6 inches high, and a variable speed drive from 0 to 95 FPM. Technical specifications include a chamber size of 18 inches wide by 7 inches high by 38 inches long and a precision temperature controller ranging from 0 to 400 degrees. The procurement also includes a 36F 3 ft flighted infeed conveyor, a Model 18-12SW 18 inch wide flexible skate-wheel conveyor, and a spare parts kit. Due to a 51 inch width entry restriction at the print shop, the machine must be delivered in separate pieces and assembled on-site. The awarded supplier must provide itemized pricing for installation and training. Safety is a critical requirement, as the machine must exceed OSHA safety standards with a fully enclosed seal area and safety interlocks on all doors, as well as built-in self-diagnostics on the control panel. Selection will be based on the lowest responsive and responsible quote. All bidders must be fully registered as suppliers with the State of Ohio through OhioBuys, OhioPays, and the Ohio Secretary of State.

Das105000 General Services Division Lzrs

POSTED

DEADLINE

Solicitation # 967-0928-27

The County of Solano, through the Sheriff's Office - Office of Emergency Services, is soliciting bids under RFQ 967-0928-27 for the procurement and delivery of one fully assembled, operational sandbagging machine. This equipment is intended to enhance emergency preparedness and operational resilience during flood and storm events by enabling the rapid production of up to 1,200 sandbags per hour with a four-person crew. The machine must feature a heavy-duty welded steel frame with a minimum 10-gauge steel hopper, forklift pockets, and a digital control panel. Key technical requirements include adjustable fill weights from 1 to 5,000 pounds, compatibility with various bag materials and fill substances such as sand, gravel, and soil, and the integration of dual hopper agitators, an industrial sewing system, and a compatible generator for use in locations without utility power. The contract is governed by the laws of the State of California and requires delivery F.O.B. destination to Fairfield, California, with a target delivery date of November 15, 2026. Award will be granted to the lowest responsive and responsible bidder. Proposers must submit their bids electronically via the OpenGov portal by November 2, 2026, including a vendor application, a signed signature page, and proof of non-debarment via SAM.gov. The successful vendor must provide a minimum two-year or one-million-cycle manufacturer's warranty and maintain comprehensive general liability and workers' compensation insurance. Additionally, vendors must comply with Cal/OSHA requirements regarding hazardous materials and provide Material Safety Data Sheets if applicable.

Sheriff's Office - Office of Emergency Services

POSTED

DEADLINE

Solicitation # 2027-RFQ-00168

The California Human Resources Department in Redwood City is soliciting quotes under solicitation number 2027-RFQ-00168 for the purchase, installation, setup, and ongoing maintenance of a high-volume folder/inserter machine. The equipment must be capable of folding, inserting, and sealing various standard mail pieces, including multi-page documents and return envelopes, to ensure secure and efficient government mail operations. Vendors are required to provide detailed equipment specifications, capacity, software licensing, and compatibility details with existing workflows. The selection process will prioritize the best overall value, weighing cost against reliability, operational efficiency, and service support. Interested parties must submit their responses by the deadline of November 10, 2026. Primary coordination for this project is handled by Financial Management Analyst Carling Luk and Mail Services Supervisor Victor Morales.

Human Resources Department

POSTED

DEADLINE

Medical Device Logistics and DeliveryThis subcontract for Medical Device Logistics and Delivery involves the secure and timely transport of sterile medical implants for prime contractors supporting SUNY Upstate Medical University projects. The service requires the use of climate-controlled vehicles and sterile handling equipment to execute cold-chain or sterile-environment transport, ensuring just-in-time delivery to the surgical center in Syracuse, New York. To qualify for this engagement, the provider must maintain HIPAA compliance and hold all necessary DOT medical transport certifications. The contract falls under NAICS code 333993 and is managed through the State University of New York.

State University of New York (SUNY)

POSTED

about 1 month ago

DEADLINE

N/A

General Info

Agency

Department Of Justice → Inc Federal Prison Industries

NAICS

333993 - Packaging Machinery Manufacturing

Place of Performance

Petersburg, VA, 23804, USA

Set-Aside

NONE

Documents

Contract Clauses and Evaluation Factors

specifications

High

SV016024 - Shrink Wrapper Procurement

4 pages · rfq

High

SV0160-24 Shrink Wrapper RFQ

2 pages · rfq

High

SV160-24 Statement of Work - Shrink Wrapper

6 pages · sow

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update

PhaseClosed

PostedAug 29

Combined Synopsis

Notice updatedAug 29

Notice details unchanged. Attachments may have changed.

Response DeadlineSep 6

Deadline has passed

Submission Closed

09/06/2024, 06:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Justice → Inc Federal Prison Industries

Contacts1 person available

OfficeHopewell, VA, 23860, USA

Organization / AgencyDepartment Of Justice → Inc Federal Prison Industries

Office AddressHopewell, VA, 23860, USA

Contacts

Wesley Newell

contact@example.gov

Full Description

Unicor, SV160-24, Shrink Wrapper FOB Destination Virginia SOLICITATION: Issued as Request for Quote (RFQ) for a Firm-Fixed-Price, Definite Delivery-Definite Quantity type contract. Vendor to supply: one (1) Shrink Wrapper delivered FOB Destination to: Unicor, Petersburg Print Warehouse 1100 River Road, Hopewell, VA 23860 STATEMENT OF WORK: Attached and provides details of the shrink wrapper and it's delivery. Questions for this solicitation will be addressed in writing to: contact@example.gov. AWARD METHODOLOGY: This acquisition will be procured in accordance with FAR Part 12 - Acquisition of Commercial Items and Part 13 - Simplified Acquisition Procedures. The Government intends to evaluate quotes and award a contract that is the best overall value to the government, in accordance with FAR 52.212-1(g). The Government reserves the right to require the quoter to submit additional information as necessary to support a pre-award determination of responsibility. CONTRACTOR'S RESPONSIBILITY: It is the responsibility of the Contractor to follow any Special Security Requirements of the correctional facility where the work is performed in the performance of the contract and to consider the effects of those security requirements in the pricing of the proposal. Contractor will be subject to NCIC check to enter federal property for delivery unless a commercial shipping service is used. PERIOD OF PERFORMANCE: UNICOR's desired delivery is 30 calendar days or sooner from receipt of purchase order issued. Vendors are required to provide their best manufacturing/delivery time for evaluation. Delivery schedule will be established at time of award. OFFERS: Signed and dated offers are submitted by email to: contact@example.gov The date and time for receipt of quotes is: Friday, September 6, 2024, at 2:00 p.m. EASTERN STANDARD TIME (EST). Do not send offers via U.S. mail. Offers shall be submitted on the SF1449. OMB Clearance 1103-0018. Offer must indicate Solicitation No. SV0160-24, time specified for receipt of offer, name, address and Page 2 of 37, telephone number of offeror, technical description of the items being offered in sufficient detail to evaluate compliance with the requirements in the solicitation, terms of any expressed warranty, price and any discount terms. Offer must include acknowledgment of all amendments, if any. THE FOLLOWING INFORMATION IS REQUIRED TO BE COMPLETED BY THE OFFEROR: SAM UNIQUE ENTITY NUMBER:_______________________________________ VENDOR'S POINT OF CONTACT: _____________________________________ VENDOR'S TELEPHONE & FAX NUMBER: _____________________________ VENDOR'S EMAIL ADDRESS: ________________________________________ VENDOR'S BUSINESS SIZE FOR NAICS CODE 333993: Small Business (Y or N): _____________ By submission of an offer, the offeror acknowledges the requirement that a prospective awardee shall be registered in the SAM database (System Award Management) prior to submitting a quote, during performance and through final payment of any contract resulting from this solicitation. The Contracting Officer is Wesley Newell at contact@example.gov.