Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on August 18, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Sole Source Justification

Awarded
1010Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541713
New
SBIR / STTR
USDA SBIR/STTR Topic 8.1 — Forests and Related Resources
Solicitation # USDA-NIFA-TOPIC-8.1
The USDA SBIR/STTR Topic 8.1 solicitation, managed by the National Institute of Food and Agriculture, seeks innovative technologies to enhance the health, productivity, and sustainability of national forests and grasslands. The program prioritizes the development of environmentally sound approaches to increase forest productivity, improve resource sustainability, and create value-added materials from woody resources. Specific areas of interest include sustainable bioenergy, biofuels derived from woody biomass, the impact of climate change on forest health, and the application of nanotechnology in wood-based products. Over a ten-year horizon, the program aims to increase the utilization of woody resources for high-value products and foster forest ecosystems that are more resilient to wildfires, pathogens, and climate-related disturbances. Key goals include improving the economic and environmental methods of sustainable harvesting and enhancing the growth and yield of forest species for more efficient land use. This opportunity is a total small business set-aside restricted to entities with fewer than 500 employees.
National Institute of Food and Agriculture

POSTED

2 days ago

DEADLINE

N/A
NAICS: 541713
New
Federal
Nuclear Technologies Development and Integration SupportThe National Nuclear Security Administration, under the Department of Energy, is forecasting a contract for Nuclear Technologies Development and Integration Support. This initiative is categorized under NAICS code 541713 and is intended to be performed in Maryland. The procurement is listed as a forecast with a posted date of October 18, 2026. Interested parties may coordinate with Chelsea Murphy, the Small Business Program Manager, regarding this opportunity.
National Nuclear Security Administration

POSTED

3 days ago

DEADLINE

N/A
NAICS: 541713
SBIR / STTR
Development of Ultrafast Nonvolatile Memory Based on Sliding Ferroelectricity in Moiré Polar Homostructures
Solicitation # OSW26TZ06-NV005
Office of the Secretary of Defense

POSTED

27 days ago

DEADLINE

in about 21 hours
NAICS: 541713
SBIR / STTR
Monolithic Graphene–CMOS Broadband (UV-LWIR) Focal Plane Arrays for target detection in low-light conditions
Solicitation # OSW26BZ06-DV027
Office of the Secretary of Defense

POSTED

27 days ago

DEADLINE

in about 21 hours
NAICS: 541713
SBIR / STTR
STTR: SHIELDER
Solicitation # DPA26TZ06-DV004
The STTR SHIELDER solicitation, issued by the Department of Defense Small Business Projects Office, focuses on the development and demonstration of innovative nanofabrication hard-mask materials. This federal opportunity is designated as a total small business set-aside under the SBIR/STTR mandate, limiting eligibility to organizations with fewer than 500 employees. Interested parties must submit their responses by the deadline of October 21, 2026. Further details regarding the technical requirements and application process can be found through the provided DARPA solicitation link under reference number DPA26TZ06-DV004.
Small Business Projects Office

POSTED

28 days ago

DEADLINE

in about 9 hours
NAICS: 541713
Federal
Operando Measurements for Electrochemical Surfactant-Mediated Growth Mechanisms for Interconnect MaterialsThe Department of Commerce is seeking technical research support to conduct operando electrochemical measurements focused on surfactant-mediated metal deposition processes. This effort supports the CHIPS Act project titled Electrodeposition of Interconnect Materials and Packaging, with a primary goal of understanding the mechanisms behind the electrochemical deposition of copper and alternative interconnect metals such as rhodium and iridium. The selected contractor will utilize operando measurements and surface science techniques to investigate nucleation and growth processes. Specific research will emphasize how interfacial structures and metal deposition are influenced by the co-adsorption and competitive adsorption of cations, anions, halides, surfactants, suppressors, and other additives. The work is slated to be performed in Gaithersburg.

POSTED

28 days ago

DEADLINE

N/A
NAICS: 541713
Federal
Theoretical/Applied Research ScientistThis subcontract for a Theoretical/Applied Research Scientist supports the Defense Advanced Research Projects Agency within the Department of Defense. The role focuses on conducting high-risk, high-reward research to secure fundamental scientific breakthroughs for prime contractors. Key responsibilities include investigating innovative approaches to drive revolutionary advances through the use of specialized simulation software and high-performance computing. The contractor is required to deliver theoretical models, validated experimental data, and scientific papers while maintaining compliance with NIST SP 800-171 standards for the protection of controlled unclassified information. This opportunity falls under NAICS code 541713 and has a response deadline of June 1, 2027.
Defense Advanced Research Projects Agcy

POSTED

about 2 months ago

DEADLINE

in 7 months
NAICS: 541713
SBIR / STTR
Development of Ultrafast Nonvolatile Memory Based on Sliding Ferroelectricity in Moiré Polar Homostructures
Solicitation # OSW26TZ06-NV005
Solicitation OSW26TZ06-NV005, issued by the Office of the Secretary of Defense, seeks the development of ultrafast, high-endurance, nonvolatile memory technology utilizing sliding ferroelectricity in polar moiré van der Waals homostructures. The objective is to create memory devices that outperform current technologies in speed, endurance, and scalability by leveraging engineered nanoscale polar domains. The project aims for dual-use applications, specifically targeting edge computing, neuromorphic computing, and radiation-tolerant electronics. Performance will be measured by switching speed, switching energy, endurance, retention, readout fidelity, and device-to-device reproducibility. This is a total small business set-aside under the SBIR/STTR mandate for companies with fewer than 500 employees. The contract is structured in phases, with a Phase II base period of 10 to 12 months not to exceed 1,000,000 dollars, and an optional period of 10 to 12 months for an additional 1,000,000 dollars. Awardees may also request up to 50,000 dollars in Discretionary Technical and Business Assistance. Proposals must be submitted via the Defense SBIR/STTR Innovation Portal by October 21, 2026, and will be evaluated based on technical merit, innovation, investigator qualifications, and commercialization potential. Compliance with CMMC and DFARS cybersecurity standards is required to safeguard federal contract information.
Office of the Secretary of Defense

POSTED

about 2 months ago

DEADLINE

in about 9 hours
NAICS: 541713
SBIR / STTR
Engineered Microstructures for Enhanced IR Aperture Performance
Solicitation # OSW26BZ06-NV024
The Office of the Secretary of Defense, through the Office of the Secretary of War, is soliciting proposals under the Small Business Innovation Research program for the development of engineered microstructures to enhance infrared aperture performance. The project seeks innovative powder synthesis and consolidation methods to produce IR-transparent composite ceramics at a scale exceeding 2 by 4 by 0.5 inches, with a long-term goal of producing components in the 3 by 9 inch range or larger. To be suitable for transition, the material must achieve sub-100 nm microstructural features in all phases, porosity below 0.1 percent, and Short-Wave to Mid-Wave Infrared transparency of at least 80 percent. Additionally, the composite must maintain these properties after exposure to 1200 degrees Celsius for 10 minutes and meet a thermal expansion to thermal conductivity ratio of 1.0 micrometers per Watt or less at 1000 degrees Celsius, with a target of 0.5 micrometers per Watt. This solicitation, numbered OSW26BZ06-NV024, is set aside for Small Business Concerns and offers a Phase I base value of 300,000 dollars over a 12-month period of performance, with potential additional TABA funding up to 6,500 dollars. Proposals must be submitted via the Defense SBIR STTR Innovation Portal by October 21, 2026, and must include seven specific volumes covering technical, cost, commercialization, and disclosure data. Awardees are required to maintain active registrations in SAM and the SBA Company Registry and must comply with DFARS 252.204-7012 for safeguarding covered defense information. The government will evaluate the work based on high professional standards, utilizing X-ray diffraction and scanning electron microscopy with energy dispersive spectroscopy to verify technical specifications.
Office of the Secretary of Defense

POSTED

about 2 months ago

DEADLINE

in about 9 hours
NAICS: 541713
SBIR / STTR
Scalable Hard-mask materials with Improved Etch resistance and Low Degradation for Extreme-aspect-Ratio fabrication (SHIELDER)
Solicitation # DPA26TZ06-DV004
The Scalable Hard-mask materials with Improved Etch resistance and Low Degradation for Extreme-aspect-Ratio fabrication (SHIELDER) project is a Small Business Technology Transfer (STTR) solicitation issued by the Defense Advanced Research Projects Agency (DARPA). The objective is to develop innovative nanofabrication hard-mask materials that overcome the physical limitations of current state-of-the-art inorganic films and sputtered metals. The goal is to enable the creation of extreme high-aspect-ratio structures, specifically targeting a 100:1 ratio, with minimal sidewall roughness and precise dimensional control. These materials are intended for use across various platforms, including semiconductor, photonic, MEMS, and quantum devices, and should be compatible with standard plasma fabrication tools such as RIE, ICP, and Bosch Deep RIE. This total small business set-aside opportunity offers a primary award value of 1,500,000 dollars over a 24-month period of performance, with an additional 12-month option valued at 450,000 dollars. Proposers may also be eligible for TABA funding of up to 6,500 dollars in Phase I and 50,000 dollars in Phase II. Proposals will be evaluated on their own individual merit based on technical merit, investigator qualifications, and commercial potential. Submissions must be made via the Defense Solutions Innovation Portal by October 21, 2026. Awardees must adhere to strict security requirements, including CMMC Level 2 self-assessment certification for those handling controlled unclassified information or ITAR-regulated work.
Defense Advanced Research Projects Agency

POSTED

about 2 months ago

DEADLINE

in about 9 hours
NAICS: 541713
SBIR / STTR
Monolithic Graphene–CMOS Broadband (UV-LWIR) Focal Plane Arrays for target detection in low-light conditions
Solicitation # OSW26BZ06-DV027
Solicitation OSW26BZ06-DV027 is a Small Business Innovation Research (SBIR) effort issued by the Office of the Secretary of Defense to develop a wafer-scale, monolithically integrated graphene-on-CMOS image sensor. The project aims to create a compact, low-power, uncooled focal plane array capable of broadband imaging from 300 nm to 10,000 nm (UV-LWIR) to enhance naval ISR target detection in low-light conditions. The primary technical objective is to retire risks associated with graphene material quality, high-yield back-end-of-line transfer, and absorber sensitization, with a specific performance goal of increasing integrated-device carrier mobility to approximately 10,000 cm²/V·s. This Direct to Phase II award has an estimated value of 2,000,000 dollars with a base period of performance of 24 months. Proposals will be evaluated based on technical approach, qualifications of key personnel, and commercial potential, with the contract likely taking the form of a Firm-Fixed-Price or Cost-Plus-Fixed-Fee agreement. Awardees must comply with strict cybersecurity and data safeguarding requirements, including R-DFARS 252.204-7012 and CMMC Phase I self-assessment standards. Submissions must be made via the DSIP portal and include comprehensive technical, cost, and commercialization volumes.
Office of the Secretary of Defense

POSTED

about 2 months ago

DEADLINE

in about 9 hours
NAICS: 541713
SBIR / STTR
Scalable Processing of Large Area, Oriented 2-Dimensional Polymer Films
Solicitation # OSW26TZ06-NV007
Solicitation OSW26TZ06-NV007, issued by the Office of the Secretary of Defense, seeks a scalable and cost-effective method to produce large-area, oriented 2-dimensional polymer (2DP) ensemble films, such as covalent organic frameworks. The primary objective is to overcome current processing limitations that result in insoluble powders or mechanically weak films by developing a process amenable to roll-to-roll manufacturing. The goal is to achieve high structural order and orientation of individual sheets perpendicular to the film plane while minimizing defects like pinholes and stacking errors. The project is structured in three phases: Phase I requires a continuous process producing films 1-50 microns thick at a rate of 100 feet per minute; Phase II aims to increase deposition rates by 2-5 times; and Phase III focuses on scaling to manufacturing-relevant levels with highly aligned domains. This is a Total Small Business Set-Aside under the STTR program, requiring proposing firms to be registered in SAM and the SBA Company Registry. Proposals must be submitted via the Defense SBIR/STTR Innovation Portal by October 21, 2026. Evaluation is based on technical merit, innovation, personnel qualifications, and commercialization potential, with technical soundness being the most important factor. Awardees must comply with strict cybersecurity standards, including CMMC and NIST SP 800-171/172, and provide an intellectual property agreement between the small business and its research partner. All work is expected to be performed at the unclassified level and is subject to government inspection to ensure high professional standards.
Office of the Secretary of Defense

POSTED

about 2 months ago

DEADLINE

in about 9 hours

General Info

Agency

Department Of Defense → W6QM Micc-Ft Rucker

NAICS

541713 - Research and Development in Nanotechnology

Place of Performance

Fort Rucker, AL, 36362, USA

Set-Aside

NONE

Documents

5

25.05.28 Poles and Arms Specifications

PDF, High priority: read this firstspecifications
High

25 Foot Steel Octaflute Streetlight Pole Diagram

PDF, High priority: read this firstspecifications
High

Solicitation 1010: Information Technology Support Services

PDF, High priority: read this firstrfp
High

IDVS - Skin and Wound Care Module Exemption Request

PDF, Low priorityjustification-and-authorization
Low

Rucker+JA+R2020_Redacted.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded
Posted

Justification (J&A)

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → W6QM Micc-Ft Rucker
Contacts1 person available
OfficeFORT RUCKER, AL, 36362, USA
Organization / AgencyDepartment Of Defense → W6QM Micc-Ft Rucker
Office AddressFORT RUCKER, AL, 36362, USA
Contacts
Bettye Whitfield
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
Sole Source Justitication see attachment

More opportunities from Department Of Defense → W6QM Micc-Ft Rucker

Same awarding agency

NAICS: 423610
New
Federal
CCTV Replacement Parts and Hardware SupplierThis small business set-aside subcontract involves the supply of replacement IP cameras, NVR components, cabling, and network hardware for prime contractors supporting W6QM Micc-Ft Rucker projects. The work is performed at Fort Rucker, Alabama, under NAICS code 423610. The supplier is responsible for delivering all necessary replacement hardware and parts, ensuring a one-year warranty is provided for all new components. Strict adherence to regulatory standards is required, specifically compliance with FAR Part 40 and the telecommunications and supply chain security prohibitions outlined in NDAA Section 889. Interested parties must submit their responses by the deadline of November 17, 2026.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

4 days ago

DEADLINE

in 28 days
View Details
NAICS: 811210
New
Federal
Security Camera System Maintenance and Technical SupportThis small business set-aside subcontract involves providing security camera system maintenance and technical support for prime contractors at Fort Rucker under the Department of Defense. The scope of work includes performing both preventative and corrective maintenance, which entails conducting semi-annual inspections based on a 12-point checklist, adjusting camera angles, and ensuring restored system functionality. Additionally, the contractor must provide 24/7/365 emergency response to address critical system outages and deliver semi-annual maintenance reports. Personnel assigned to this project are required to complete AT Level I and iWATCH training. The opportunity is categorized under NAICS code 811210, with a response deadline set for November 17, 2026. Performance of these services will take place at Fort Rucker, Alabama.
Electronic and Precision Equipment Repair and Maintenance

POSTED

4 days ago

DEADLINE

in 28 days
View Details
NAICS: 238210
New
Federal
CCTV Integration and Structured Cabling InstallationThis small business set-aside subcontract involves the installation of Cat6 and fiber optic cabling for prime contractors supporting W6QM Micc-Ft Rucker projects at Fort Rucker, Alabama. The scope of work includes the installation and termination of patch panels, connectors, and PoE network switches to integrate government furnished equipment IP cameras from three remote buildings into a centralized monitoring station. The final deliverable is a fully operational and integrated CCTV network that adheres strictly to DPW specifications. Personnel assigned to this project must complete AT Level I and iWATCH training to ensure site compliance. The project falls under NAICS code 238210 and is managed under the Department of Defense. Interested parties should note the response deadline of November 17, 2026.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

4 days ago

DEADLINE

in 28 days
View Details
NAICS: 561621
New
Federal
W9124G26CBARRACKS
Solicitation # 052917
The Department of Defense is seeking a small business contractor under a firm-fixed price contract to provide security camera maintenance and integration services for four barracks facilities at Fort Rucker, Alabama. The scope of work involves integrating IP cameras and network hardware from Buildings 8354, 8355, and 8356 into a centralized monitoring station in Building 8350, as well as performing semi-annual preventative maintenance inspections based on a 12-point checklist. The contract spans a five-year period, consisting of a 12-month base year for integration and maintenance, followed by four optional 12-month maintenance-only years. Award will be based on the Lowest Price Technically Acceptable (LPTA) process, where quotes are ranked by price and evaluated on a pass/fail basis for technical capability. To be deemed acceptable, offerors must demonstrate a feasible integration approach, a compliant maintenance plan, and the ability to meet strict response times, including a one-hour telephone response and four-hour on-site arrival for critical system failures. Contractors must also commit to a one-year warranty on new parts and labor, adhere to a 250 dollar pre-approval threshold for replacement parts, and ensure personnel complete AT Level I and iWATCH training within 90 days of award. The procurement is a 100 percent total small business set-aside under NAICS code 561621. Interested parties must submit a two-volume proposal consisting of a technical capability narrative and a pricing schedule by November 17, 2026. All work must comply with Fort Rucker building codes and Department of Production Works specifications, with final inspections conducted by the DPW. Repair and replacement parts are funded through a government-established not-to-exceed allowance of 3,000 dollars per year.
Security Systems Services (except Locksmiths)

POSTED

4 days ago

DEADLINE

in 28 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS