Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

SOURCES SOUGHT FOR “AUTOMATED LOGIC CORPORATION (ALC)” DIRECT DIGITAL CONTROL (DDC), NAVFAC HAWAII PROJECTS AT MARINE CORPS BASE HAWAII

Active
N62478CON31FY2611Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → Navfacsyscom HawaiiView Agency

NAICS

334512 - Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance UseView NAICS

Place of Performance

HI, 96734, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSources Sought
Posted

Sources Sought

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Navfacsyscom Hawaii
Contacts1 person available
OfficePEARL HARBOR, HI, 96860-3139, USA
Organization / Agency
Department Of Defense → Navfacsyscom Hawaii
View Agency Profile
Office AddressPEARL HARBOR, HI, 96860-3139, USA
Contacts
JESSICA SHIMODA

Full Description

Show more

The Government intends to procure, under only one responsible source, where no other suppliers or service will satisfy the agency requirements for MCON Project P-1003 3D MLR Armory Expansion, Marine Corps Base Hawaii (MCBH), Kaneohe Bay, Oahu, Hawaii.  The Naval Facilities Engineering Systems Command, Hawaii is conducting market research to determine if other potential products/sources can provide a Direct Digital Control that has the same requirements/specifications as the Automated Logic Direct Digital Control (DDC) manufactured by Automated Logic, 1150 Roberts Boulevard, Kennesaw, GA 30144.  The alternate product/source must meet the following requirements/specifications:   



  1. Equipment shall be tested and listed by a Nationally Recognized Testing Laboratory (NRTL). 


  1. Equipment shall utilize BACNet communication protocol. 


  1. Must be able to seamlessly integrate into the existing ALC Utility Monitoring and Control System (UMCS) to allow configuration and programming functions without alternatives such as Java Application Control Engines (JACE) technology. 


  1. Standardization on a single product for ease in maintenance. 


  1. Having a local maintenance organization/contractor for support. 


  1. Minimizing and standardizing spares. 


  1. Interchangeable and interoperable with MCBH existing ALC DDC systems. 


  1. Minimizing and standardizing training costs for MCBH maintenance staff 



This notification is for market research purposes only and should not be construed as a commitment of any kind by the U.S. Government to issue a solicitation, request for proposals, quotes or invitation for bids or award a contract.  



Interested parties with a comparable product meeting the requirements described in this announcement are invited to submit complete technical data, information and specifications in order for the Government to conduct an evaluation of your product to ensure compatibility with the existing system.  Technical response shall be typed, at least 11 point Times New Roman or larger and shall not exceed 2 pages single-sided 8.5 by 11 inch pages and submitted in Adobe PDF format.  Also, provide company information and point of contact (name, title, email, phone, mailing address). 



The Government will not reimburse any responder for any costs associated with information submitted in response to this sources sought announcement.  Any information provided to the Government in response to this request for information (RFI) will become U.S. Government property and will not be returned.  All proprietary or classified information will be treated appropriately.  The Government reserves the right to disregard any submittal that is incomplete or vague.  Please do not submit your company brochure. 



Interested parties shall submit information and specifications to Ms. Jessica Shimoda, Contract Specialist at jessica.a.shimoda.civ@us.navy.mil. Interested parties responding to this announcement by Wednesday, July 28, 2026 at 2:00 p.m. Hawaii Standard Time will be considered.

Similar Contracts

Same NAICS industry code

NAICS: 334512
New
DIBBS
SWITCH, THERMOSTATICThis contract pertains to the procurement of a thermostatic switch identified by NSN 5930-00-327-8000 and part number 975-0002-001, with a required quantity of 41 units to be delivered within 141 days under a total small business set-aside. The item must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specification standards. The supplier is prohibited from using ozone-depleting chemicals or intentionally adding mercury or mercury-containing compounds, except in limited exempted cases such as batteries, fluorescent lights, sensors, or specific naval instruments, with any mercury-containing components requiring secondary containment and shock-proof design per NAVSEA 5100-003D. Packaging must adhere to DLA standards including MIL-STD-129 labeling, and if hazardous under FED-STD-313, must meet TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, though DLA requirements always take priority. Palletization must follow RP001, and all materials must be delivered FOB origin with zero variance in quantity. Inspection and acceptance occur at the destination, and the technical data referenced is incomplete but the delivered item must fully meet its intended functional and performance criteria. The solicitation is issued by the Department of Defense’s Maritime Supply Chain under the NAICS code 334512, with Bryan Fair listed as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

in 15 days
View Details
NAICS: 334512
New
DIBBS
GAGE, COMPOUND PRESSThis contract pertains to the procurement of seven compound press gauges, identified by NSN 6685016781282 and part number 69020, under solicitation SPE4A6-26-T-08UP, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 164 days from the award date, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the manufacturer’s facility. The item must be marked as a critical application item and labeled with special marking code 05 for delicate instruments, following MIL-STD-129 for labeling and MIL-STD-2073-1E for packaging, with preservation methods specified as preservative coating and dry storage. Packaging and shipment must adhere to DLA’s procurement packaging requirements and cannot contain mercury or mercury compounds in any preservation, packaging, or labeling materials, consistent with IP056 and broader mercury restrictions that allow only functional exceptions in batteries, lighting, instruments, and weapon systems under strict containment guidelines per NAVSEA 5100-003D. All suppliers must comply with tailored higher-level quality requirements, zero-defect sampling standards under MIL-STD-1916 or ASQ H1331, and verification levels for critical, major, and minor attributes, with non-conforming items subject to removal of government markings. The contract imposes stringent source approval documentation through RC001, mandates use of calibrated measuring and test equipment per RT001, and applies covered defense information protocols under RD003. Delivery is directed to DLA Distribution San Joaquin in Tracy, California, with a need ship date of January 10, 2027, and original delivery deadline of February 11, 2027. The unit of issue is each, at an agreed price of $7.00 per unit, for a total value of $49.00. The solicitation incorporates technical and quality standards referenced in the DLA Master List, with revisions controlled by the award date for simplified acquisitions. All documentation, sampling, and quality procedures must align with government-prescribed methodologies, and failure to meet any requirement may result in rejection at origin. Electronic procurement and compliance tools are referenced for unit of issue conversion and procurement documentation, and the primary point of contact is John Schaefer at DLA.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
INDICATOR, PRESSUREThe contract specifies the procurement of one pressure indicator with NSN 6685016992355 under solicitation SPE4A5-26-T-304A, with delivery required within 20 days to FPO AP 96692 aboard the USS Montgomery LCS 8. The item must be delivered FOB origin, with no tolerance for quantity variance, and is subject to inspection and acceptance at the point of origin. Packaging must comply with DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 and Federal Standard 313, with non-hazardous items requiring commercial packaging and all packaging labeled per MIL-STD-129. Palletization must follow RP001 guidelines, and hazardous materials must meet IP025 requirements. Sampling inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise specified, with attributes classified as critical, major, or minor assigning corresponding verification levels or AQLs. The contract mandates use of traceable shipping methods only, prohibiting parcel post, and directs vendors to use the VSM system with RDD 777 for shipment tracking. The unit of issue is each, with one unit ordered at a unit price of $1.00 and total price of $1.00. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List as of the solicitation issue date, and all documentation must align with SAR and identification protocols. The original required delivery date is July 15, 2026, and the point of contact is Leon Watson with the Department of Defense.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
TRANSMITTER, PRESSURThis contract is for the procurement of two pressure transmitters with part number PGT-GP-1500-G-2 and NSN 6685015400723, classified as a critical application item under specification MIL-P-24212C. Delivery is scheduled within 171 days from the contract award, with FOB origin terms and zero tolerance for quantity variance. All items must comply with DLA packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129, including palletization per RP001 and special handling for hazardous materials under IP025 and IP056, which strictly prohibit mercury or mercury compounds in preservation, packaging, and marking except for exempted functional uses such as batteries or sensors specifically authorized by NAVSEA. Portable instruments containing mercury must include a secondary containment barrier per NAVSEA 5100-003D. Inspection and acceptance occur at origin, with sampling governed by MIL-STD-1916 or equivalent zero-based plans, assigning verification levels or AQLs based on attribute criticality. The supplier must adhere to ISO 9001:2015 quality requirements and ensure all measuring and test equipment is calibrated and documented. The item must be shipped to the DLA Distribution facility in New Cumberland, Pennsylvania, with the delivery deadline set for January 22, 2027, and a required ship date of January 17, 2027. Technical and quality requirements are referenced via R-numbers from the DLA Master List, and all provisions are controlled by the solicitation revision dated May 3, 2021.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → Navfacsyscom Hawaii

Same awarding agency

NAICS: 561210
New
Federal
Facility Support ServicesThe solicitation for Facility Support Services at the Marine Corps Reserve Training Center in Kaneohe Bay, Hawaii, under solicitation number N6247826R2433, seeks qualified contractors to provide comprehensive custodial, pest control, grounds maintenance, and minor repair services for buildings, structures, and grounds. The contract is structured as an 8(a) competed set-aside under NAICS code 561210, utilizing simplified acquisition procedures, and is designed as a one-year base contract with up to five option years, extending potential performance to 66 months. Recurring work is defined by CLINs for each base and option year, while non-recurring work is separately priced under specified specifications (1503010, 1503020, 1503050, and 1503060, Spec Item 3 and 4). All work must align with the Integrated Pest Management Plan and adhere to required standards and frequencies detailed in attachments, including Attachment 1503050-03 for grounds maintenance schedules. Offerors must submit pricing proposals via the PIEE Solicitation Portal, with completeness of all required submissions being mandatory for eligibility; failure to include any item renders the proposal ineligible. The government will evaluate proposals using FAR 52.212-2 and intends to award without discussions, requiring offerors to include their best terms in the initial submission. Contractors must be registered in SAM.gov with accurate and matching CAGE Code and Unique Entity ID to ensure timely payment via Electronic Funds Transfer, as mandated by FAR 52.232-33. Offerors must complete FAR 52.212-3 for commercial products and services representations and certify their business size and socioeconomic status, including 8(a), HUBZone, SDVOSB, or WOSB eligibility. Insurance requirements stipulate adherence to Annex 0200000 with no umbrella coverage allowed, and labor costs must include payroll burdens such as workers’ compensation, unemployment, and social security. The Service Contract Act applies to certain performance, and CMMC Level 1 cybersecurity compliance is required for contractors and subcontractors. All trade personnel performing inspections or repairs must be qualified at the journeyman level, and contractors must attest to filing the most recent VETS-4212 report if applicable. Amendments have been issued to extend the proposal due date and incorporate RFI
Facilities Support Services

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
Federal
Market Research for Architect-Engineer Services for Civil Engineering Projects at Various Locations, Naval Facilities Engineering Systems Command (NAVFAC) Hawaii AreasThe U.S. Navy’s Naval Facilities Engineering Systems Command Hawaii is conducting market research to identify qualified firms capable of providing Architect-Engineer services for civil engineering projects across various locations within its operational area. The solicitation, identified as N62478CON33FY2601, is posted under NAICS Code 541330 and seeks industry input on the availability of firms with specialized experience in civil engineering design and related disciplines. Submission of responses is required by Thursday, August 6, 2026, at 12:00 p.m. Hawaii Standard Time. Interested parties must review and respond to the attached documentation, including Firm Information, Specialized Experience requirements, and Key Personnel qualifications to ensure alignment with the government’s needs. Responses must demonstrate capability to perform work at Joint Base Pearl Harbor-Hickam and surrounding areas in Hawaii. The primary point of contact for inquiries is Brittney Lazo, with Kris Nakashima-Wong serving as the secondary contact, both reachable via official Navy email addresses. All materials must be submitted through the SAM.gov platform, and no formal procurement is guaranteed as this is purely a sources sought notice to assess industry capacity.
Engineering Services

POSTED

6 days ago

DEADLINE

in 15 days
View Details
NAICS: 541330
Federal
Indefinite Delivery/Indefinite Quantity Contract for Architect-Engineer Services for Utility Projects at Various Locations under the Cognizance of Naval Facilities Engineering Systems Command, HawaiiThe solicitation N6247826R5058 is for an Indefinite Delivery/Indefinite Quantity (IDIQ) contract to procure Architect-Engineer services for utility projects across various locations under the cognizance of Naval Facilities Engineering Systems Command, Hawaii, with an estimated contract value not to exceed $249,000,000 and a guaranteed minimum of $3,000. The contract will be awarded via Firm-Fixed Price task orders, targeting highly qualified firms capable of delivering design and engineering services for military utility infrastructure, including new construction projects with estimated costs of $20 million or more and repair/renovation projects of $15 million or more completed within the last ten years. Required services encompass project documentation using DD Form 1391, concept development through FACD workshops and design charrettes, development of Design-Build and Design-Bid-Build construction documents, comprehensive engineering studies such as geotechnical and hydrographic surveys, cost and schedule risk analysis, and post-construction award support. Technical disciplines must include Principal-in-Charge, Civil, Electrical, Telecommunications, Architect, Structural, Mechanical, Fire Protection, Geotechnical, and Fuels/Petroleum/Oils/Lubricant (POL), with the POL engineer having specific experience in aviation and marine diesel fuel systems on military land-based facilities. Proposals must be submitted electronically via email or DoD SAFE in a single Adobe PDF file not exceeding 8GB, with hard copies and facsimile submissions prohibited. All offers must include a completed SF330 form and be received by 2:00 p.m. Hawaii Standard Time on Wednesday, August 12, 2026. Offerors must maintain an active SAM registration and provide their Unique Entity Identifier and CAGE number. Compliance with all instructions is mandatory and serves as a pass/fail gate; failure to submit required attachments or follow formatting guidelines will disqualify the proposal. Evaluation is based on nine weighted factors in descending order of importance: Specialized Experience, Professional Qualifications, Past Performance, Quality Control Program, Program Management and Capacity, Firm Location, Sustainable Design, Commitment to Small Business, and Volume of Work as a tiebreaker. Past performance is limited to projects listed under the specialized experience criterion. Small business participation is a major focus, requiring large businesses to submit three recent Individual Subcontracting Reports and all offerors to complete Attachment D on historical small business utilization. Small business
Engineering Services

POSTED

7 days ago

DEADLINE

in 21 days
View Details
NAICS: 541611
Federal
Small Business Subcontracting & Reporting SupportThe contract titled Small Business Subcontracting & Reporting Support seeks administrative and compliance services to manage federal subcontracting plans, with a focus on tracking small business utilization, establishing and monitoring subcontracting goals, and ensuring accurate electronic Subcontracting Reporting System eSRS submissions. The work is required to support compliance with federal regulations governing small business participation in Department of Defense contracts and will involve ongoing data collection, analysis, and reporting to meet federal oversight requirements. This effort is scoped to support Navfacsyscom Hawaii within the Department of Defense, with performance taking place at Joint Base Pearl Harbor Hickam in ZIP code 96860. The NAICS code 541611 indicates the services fall under Management Consulting Services, aligning the work with advisory and compliance functions rather than direct procurement or construction. The solicitation was posted on June 24, 2026, with responses due by August 13, 2026, and the opportunity is classified as a subcontracting support engagement, though no specific set aside status is indicated. Contractors must demonstrate expertise in federal subcontracting compliance, experience with eSRS systems, and the ability to deliver timely and accurate reporting to meet government accountability standards.
Administrative Management and General Management Consulting Services

POSTED

29 days ago

DEADLINE

in 21 days
View Details
NAICS: 541620
Federal
Sustainable Design & LEED ConsultingThe contract seeks qualified firms to integrate sustainable design principles into military infrastructure projects under the Department of Defense, specifically for facilities located at Joint Base Pearl Harbor-Hickam with a zip code of 96860. The work centers on achieving certification through recognized sustainability standards such as LEED, Envision, or the Guiding Principles for Sustainable Federal Buildings, with a strong emphasis on energy efficiency and water conservation measures. Contractors will be expected to provide expert consulting services that align with NAICS code 541620, which covers environmental consulting, ensuring that all design and planning activities meet federal sustainability benchmarks while supporting long-term operational resilience. This is a subcontract opportunity with a posted date of June 24, 2026, and a response deadline of August 13, 2026, administered by Navfacsyscom Hawaii. There is no specified set-aside classification, and the solicitation number is not provided. The project’s success hinges on the contractor’s ability to deliver technically sound, certified sustainable solutions that reduce environmental impact without compromising mission readiness or structural integrity. All work must be conducted in compliance with federal guidelines and tailored to the unique environmental and logistical conditions of the Pacific region, particularly within a military context where durability and sustainability must coexist.
Environmental Consulting Services

POSTED

29 days ago

DEADLINE

in 21 days
View Details