Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Specialized Facility Integration (Nuclear/Hazardous Materials)

Active

Federal

Response Deadline10/01/2026, 11:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Specialized Facility Integration (Nuclear/Hazardous Materials), involves the installation and integration of the UltraSep platform within high-security or hazardous environments for the Department of Energy. Performed in Los Alamos, the scope of work includes facility modification, piping and instrumentation integration, and installation within regulated nuclear materials processing areas to deliver a fully commissioned operational system. The project is managed by Triad, a DOE contractor, under NAICS code 238220. Due to the nature of the work, personnel must possess hazardous material handling certifications and valid DOE security clearances. The response deadline for this opportunity is October 1, 2026.

General Info

Triad seeks UltraSep platform installation in Los Alamos for DOE by October 1, 2026.

Agency

Department Of Energy → Triad - DOE ContractorView Agency

NAICS

238220 - Plumbing, Heating, and Air-Conditioning ContractorsView NAICS

Place of Performance

Los Alamos, NM, 87545, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-22794.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

TECHNOLOGY LICENSING OPPORTUNITY: UltraSep Acoustic Separation Platform

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 8

subcontract

Response DeadlineOct 1

Submission deadline

Response Deadline

10/01/2026, 11:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Energy → Triad - DOE Contractor

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Energy → Triad - DOE Contractor

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Installs and integrates the UltraSep platform into high-security or hazardous environments for prime contractors on DOE projects. Performs facility modification, piping and instrumentation (P&ID) integration, and installation within regulated nuclear materials processing areas. Requires hazardous material handling certifications and DOE security clearances. Delivers a commissioned operational system.

Similar Contracts

Same NAICS industry code

ICE 8A - Ft Benning Improvements

Solicitation # 70CMSW25R00000011

This firm-fixed-price task order, issued under a MACC multiple-award IDIQ contract by the Department of Homeland Security Immigration and Customs Enforcement, provides design-build services for life, safety, and operational improvements at Fort Benning, Georgia. The project has an estimated magnitude between 4.0 million and 4.5 million dollars and a period of performance not to exceed 365 days from the date of award. The scope of work includes the installation of aluminum awnings at the shipping and receiving dock and Fiske Range, turf replacement at Fiske Range, the demolition and site restoration of Building 2294, gutter and drainage improvements at Building 234, and the replacement and maintenance of commercial HVAC systems across Buildings 2949, 234, 1836, and 19. Additionally, the contractor will perform general facility improvements for Building 301 and the DAGr Team facility. Award will be based solely on the lowest total evaluated price, though the government will also evaluate the offeror's technical approach, design resources, and the validity of their methodology. Proposals must be submitted in two volumes: a technical and safety volume and a pricing volume using the provided CSI division template. The contract is subject to the Davis-Bacon Act, requiring prevailing wage rates and specific paid sick leave provisions. Key administrative requirements include the submission of payment requests via the Invoice Processing Platform accompanied by certified payroll, and the provision of performance and payment bonds. Final inspection and technical assistance will be managed by the Contracting Officer's Representative.

Bristol Alliance of Companies

POSTED

about 9 hours ago

DEADLINE

PIDC Project 3 - Dorm RTU Replacement and SCADA

Solicitation # 872287

This firm-fixed-price task order, issued under an 8(a) MACC IDIQ, involves the replacement and upgrade of Rooftop HVAC Units (RTUs) for the Alpha, Bravo, Charlie, and Delta dorms, as well as a SCADA system upgrade at the Port Isabel Detention Center in Los Fresnos, Texas. The project objective is to replace corroded and obsolete equipment with high-quality, coastal weather-resistant, and durable systems that exceed commercial standards. The scope includes removing existing RTUs, replacing necessary piping, electrical, and ducting, and installing new SCADA software and two chemical feed pumps in compliance with Texas Commission of Environmental Quality standards. The estimated magnitude of the project is between 1.2 million and 1.5 million dollars, with a period of performance of 365 days from the date of award. Award will be based solely on the lowest total evaluated price, provided the offeror demonstrates a sound technical approach, appropriate design resources, and a comprehensive quality control and safety program. Key requirements include the submission of a Quality Control Plan, a safety plan, and the designation of a Project Manager with at least five years of relevant federal contracting experience. The contractor must also provide a one-year warranty for installation and craftsmanship and ensure all personnel pass required background checks for site access. Compliance with the Davis-Bacon Act and associated executive orders regarding wages and sick leave is mandatory. All payment requests must be submitted electronically via the Invoice Processing Platform and accompanied by certified payroll.

Bristol Alliance of Companies

POSTED

about 9 hours ago

DEADLINE

RFQ7593 Smoke Detector Installation

Solicitation # RFQ7593

Management & Training Corporation (MTC) is soliciting bids for a fee-for-service subcontracting opportunity to provide smoke detector installation and fire system services at the Sierra Nevada Job Corps Center in Reno, Nevada. The scope of work requires the replacement of 43 smoke detectors across specific dormitory rooms, including 12 detectors in rooms 11, 15, and 18, 12 detectors in room 19, and 19 detectors in rooms 20 and 21. The contractor must ensure all installed detectors communicate with the fire panel and that all work adheres to NFPA standards and local Authority Having Jurisdiction requirements. Bids must be submitted via email to Tom Williams by 3:00 PM PST on September 18, 2026. To be considered, applicants must provide a completed bid sheet, proof of insurance, and a supplier packet containing a W-9, self-certification form, and acceptance of terms and conditions. This opportunity is open to various small business set-asides, including SDB, WOSB, HUBZone, and Veteran-Owned businesses, under NAICS code 238220. Award decisions will be based on the best value as determined by MTC. The contract mandates compliance with Service Contract Labor Standards and Wage Determination No. 2015-5595 Revision 28 for labor rates in Washoe and Storey counties. Additionally, subcontractors must provide a 12-digit Unique Entity ID and certify their debarment status under FAR 52.209-6 if the subcontract exceeds 30,000 dollars. Strict adherence to government and Department of Labor guidance regarding the protection of sensitive and proprietary information is required.

Sierra Nevada Job Corps Center

POSTED

about 9 hours ago

DEADLINE

2026-Clearfield-Bldg E8 Welding HVAC

Solicitation # 2026- Clearfield- Welding Bldg. E8 HVAC Replacement

Management & Training Corporation (MTC) is seeking fixed-price lump sum bids for a subcontracting opportunity to replace the 20hp motor connected to the rooftop HVAC system at the Clearfield Job Corps Center in Clearfield, Utah. The scope of work includes the complete removal and replacement of the existing motor, electrical hookup, system testing, commissioning, and the provision of onsite training and maintenance manuals for facility personnel. Bidders must conduct a physical site visit and sign the attendance roster to be eligible for award. The project requires the contractor to handle all permits, fees, and the removal of all construction debris and packaging from the site. Bids are due by September 19, 2026, at 3:00 PM MST and must be submitted via email to the designated points of contact. Submissions must include a signed MTC Bid for Lump Sum Contract form, a detailed cost breakout on company letterhead, and a bid bond guarantee from a surety company with at least an A- rating. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Award decisions will be based on overall best value. The contract is subject to federal regulations, including the Davis-Bacon Act for prevailing wages in Davis County, Utah, and the Contract Work Hours and Safety Standards Act. Compliance with OSHA requirements and federal, state, and local codes is mandatory. Selected contractors must provide a 12-digit Unique Entity ID (UEI) and a 9-digit Tax ID via the MTC Supplier Self-Certification form. Payment will be processed through pay applications using AIA G702 and G703 forms based on a submitted Schedule of Values. Performance and payment bonds must be submitted within five business days of receiving an Intent to Award letter.

Management & Training Corporation

POSTED

about 9 hours ago

DEADLINE

CBP7664 Wellness HVAC Compressor Replacement

Solicitation # CBP7664

Management & Training Corporation is seeking bids for a subcontracting opportunity to replace a failed HVAC/refrigeration compressor at the Wellness facility of the Sierra Nevada Job Corps Center in Reno, Nevada. The project is structured in five phases: preparation and environmental safety, demolition and removal, installation of an OEM-specified compressor and related components, system testing and commissioning, and final closeout. The contractor must ensure full restoration of cooling capacity and operational efficiency while adhering to EPA Section 608 regulations for refrigerant recovery. The work must be completed within 30 consecutive business days following a written Notice to Proceed. Bids will be evaluated based on overall best value, considering price, quality, and delivery schedules. For bids equal to or greater than 25,000 dollars, a bid bond of 20 percent of the base bid is required, along with performance and payment bonds from an A-rated surety company. Submission requirements include a signed bid sheet, a detailed bid breakout, and verification of a physical site visit. Contractors must comply with Davis-Bacon Act wage determinations for Washoe County and provide self-certification of their business size and socioeconomic category per FAR 52.219-8. Final payment is contingent upon the submission of a Notice of Final Completion, certified payroll reports, and two sets of operation and maintenance manuals.

Sierra Nevada Job Corps Center

POSTED

about 9 hours ago

DEADLINE

Replace Shower Diverters in two (2) Dorms

Solicitation # replace-shower-diverters-two-2-dorms

This project involves the removal and replacement of shower diverters in eight bathrooms across two dormitories located in Indiana. The scope of work includes replacing existing Powers brand diverters with Delta or comparable models featuring readily available parts, as well as repairing or replacing any deteriorated piping leading into the diverters. The solicitation is open to various small business categories, including SDB, WOSB, HUBZone, and SDVOSB entities under NAICS code 238220. Proposals must be submitted via email to Tammy Swallows at Atterbury Job Corps by September 14, 2026, at 3:00 PM.

Adams & Associates

POSTED

about 9 hours ago

DEADLINE

This is a subcontracting opportunity to replace a chiller in McKinney, TX.

Solicitation # subcontracting-opportunity-replace-chiller-mckinney-tx

Serrato Corporation is seeking bids for a subcontracting opportunity to replace a failing 246-ton air-cooled chiller at the North Texas Job Corps Center, specifically in Building 214/215 located in McKinney, Texas. The scope of work includes the demolition and disposal of the existing unit and the installation and startup of a like-kind, similar model replacement. Additionally, the project requires the installation of a JACE 9000 central integration point for building automation controls to manage the chiller, pumps, boiler, and four multi-zone air handling units. The contractor must also perform cleaning and inspection of the air handling units, replace belts, install four 3-way control valves, and replace three of the four air handler VFDs. Bids must be submitted by September 18, 2026, and quotes must remain valid for 90 days. Required submission documentation includes manufacturer equipment specifications, Form 1413 for Davis-Bacon Act certified payroll compliance for work exceeding 2,000 dollars, and a Certificate of Liability Insurance naming Serrato Corporation as the holder. Insurance minimums include 1 million dollars for Commercial General Liability and Comprehensive Automobile Liability, and 500,000 dollars for Employers Liability. This opportunity is set aside for various small business categories, including SDB, WOSB, HUBZone, and SDVOSB. Primary points of contact for the project are Stacy Smith and Roy Henderson.

Serrato Corporation DBA North Texas Job Corps

POSTED

about 9 hours ago

DEADLINE

AAL-0880-02 HVAC and Electrical Upgrades Fairbanks

Solicitation # AAL-0880-02

Solicitation AAL-0880-02 involves HVAC and electrical upgrades at the Fairbanks FSS facility in Alaska. The scope of work includes the replacement of the chiller, four AC units, and chilled-water piping, along with associated electrical system upgrades. Key requirements include modifying Panel P1 and HVAC circuits and ensuring the provision of temporary and redundant cooling throughout the construction period to maintain operational continuity. The project concludes with startup, testing, commissioning, FAA training, punch-list completion, and final closeout. The estimated construction magnitude for this project is between 250,000 and 500,000 dollars, with a proposed start date of April 15, 2027. This opportunity is categorized under NAICS code 238220 and is set aside for various small business categories, including Small Disadvantaged Business, Women-Owned Small Business, HUBZone, and Veteran-Owned Small Business. The primary point of contact for this solicitation is Masanori Akers.

PTSI Managed Services Inc.

POSTED

about 9 hours ago

DEADLINE

Main Building 1 Wing 5 – Six Rooftop HVAC Unit Replacement – Glenmont Job Corps Center

Solicitation # S26-010

The Glenmont Job Corps Center is soliciting proposals from qualified, New York State licensed contractors for the replacement and installation of HVAC equipment within Main Building No. 1, Wing 5 (Education Building) in Glenmont, New York. The project involves replacing two 7.5-ton split-system units for the auditorium, one 6-ton rooftop unit for the library and computer lab, and one 12.5-ton rooftop unit for the north and east wing classrooms. Additionally, the scope includes installing four 2-ton ductless mini-split heat pump systems, removing a window air-conditioning unit, and abandoning two 5-ton rooftop units in place. Comprehensive associated work encompasses demolition, roof curbs and penetrations, ductwork, refrigerant and condensate piping, electrical work, controls, structural roof evaluations, and fire alarm and duct smoke detector installations, concluding with testing, balancing, and commissioning. This solicitation is set aside for various small business categories, including SDB, WOSB, HUBZone, and Veteran-Owned Small Businesses. The project must be completed within 210 calendar days following the written Notice to Proceed, and the facility will remain operational throughout the construction period. Key deadlines include a pre-proposal site walkthrough on September 10, 2026, with vendor questions due by September 14, 2026. Final proposals must be submitted by September 21, 2026, at 4:00 PM ET. All work must comply with applicable New York State codes, safety regulations, and environmental requirements.

Adams and Associates, Inc.

POSTED

about 9 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) 1091 – Glazing/Welding/Heavy Mechanics Bldg

Solicitation # 26-140

This project involves the replacement of a pad-mounted gas-fired packaged HVAC unit at the Glazing, Welding, and Heavy Mechanics Building (1091) in Indiana. The existing 10-ton Carrier unit, which utilizes R-22 refrigerant, will be replaced with a new 12.5 SEER packaged unit using non-R22 refrigerants such as R-410A or R-454B. The scope of work requires the reuse of existing ductwork, electrical disconnects, and thermostat wiring. Following installation, the old unit and any recovered refrigerant must be labeled and left at the maintenance building for parts and reuse. The solicitation is managed by Adams and Associates, Inc., with a response deadline of October 5, 2026. This opportunity is set aside for various small business categories, including Small Disadvantaged, Women-Owned, HUBZone, and Veteran-Owned businesses. Interested parties should contact Tammy Swallows for further information regarding this NAICS 238220 project.

Adams & Associates, Inc.

POSTED

about 9 hours ago

DEADLINE

Replace HVAC Systems in the following buildings on our campus –1.) ABL Dormitory

Solicitation # 26-141

Adams & Associates, Inc., operating for the U.S. Department of Labor, is soliciting a single lump sum contract to replace HVAC systems at the ABL Dormitory within the Atterbury Job Corps Center in Indiana. The project involves replacing existing R-22 Bryant gas-fired furnaces and condensing units with new 12.5 SEER packaged units utilizing non-R22 refrigerants such as R-410A or R-454B. The scope includes the installation of compatible coils and the reuse of existing electrical disconnects, ductwork, and thermostat wiring. All recovered refrigerant must be labeled and left on-site. Eligible bidders must be registered in SAM.gov with a valid Unique Entity ID and hold a valid Indiana Contractor's License. A mandatory site visit is scheduled for September 23, 2026, with final proposals due by October 5, 2026. Award decisions will be based on best value, evaluating price (60 points), quality (20 points), past performance (10 points), and schedule (10 points). The contractor must provide a sequenced construction schedule within 10 days of the Notice to Proceed and guarantee all workmanship for one year. Payment terms are Net 30, contingent upon the submission of certified payroll records, a completed SF 1413, and the release of liens. Compliance with EPA, OSHA, and Davis-Bacon Act wage determinations is required.

Adams & Associates, Inc.

POSTED

about 9 hours ago

DEADLINE

AAL-0810-01 Sitka (SIT) Flight Service Station (FSS) Fire Esc

Solicitation # AAL-0810-01

Solicitation AAL-0810-01 is a design-build construction project for the Sitka Flight Service Station in Sitka, Alaska. The primary objective is to design and construct an access stair platform serving the third floor of the facility. The comprehensive scope of work includes conducting a site survey, obtaining necessary permits, developing the final design, executing construction, performing inspections, completing the punch-list, and providing final as-built drawings. The project has an estimated construction magnitude between 250,000 and 500,000 dollars and is proposed to start on February 1, 2027. This opportunity is set aside for small businesses, including small disadvantaged businesses, women-owned small businesses, HUBZone small businesses, and veteran-owned or service-disabled veteran-owned small businesses. The solicitation was posted on September 11, 2026, with a response deadline of September 25, 2026, and falls under NAICS code 238220.

PTSI Managed Services Inc.

POSTED

about 9 hours ago

DEADLINE

More opportunities from Department Of Energy → Triad - DOE Contractor

Same awarding agency

TECHNOLOGY LICENSING OPPORTUNITY: SonicCoat

Solicitation # S-193603

SonicCoat is a technology licensing opportunity from Los Alamos National Laboratory featuring a non-invasive ultrasonic evaluation system for catalyst coatings in electrochemical devices. Utilizing Acoustic Resonance Spectroscopy, the system employs a transducer to measure the thickness and uniformity of coatings, such as platinum in fuel cells and electrolyzers, by analyzing shifts in resonant tones. This non-destructive method allows for real-time, in-line quality control without the need to pause production or utilize destructive laboratory sampling, resulting in higher yields, reduced material waste, and improved device performance. The technology is currently at TRL 4 with a patent pending and is applicable to various markets including battery manufacturing, solar energy, and semiconductor fabrication. This opportunity is available for exclusive or non-exclusive licensing to existing companies or startups. Interested parties should contact the licensing department at Los Alamos National Laboratory by the response deadline of December 11, 2026.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

TIDAL: Target-Induced Droplet Assembly of Ligands

Solicitation # S-197478

Developed by Los Alamos National Laboratory, TIDAL (Target-Induced Droplet Assembly of Ligands) is a programmable protein-only material that utilizes nanobodies fused with encapsulation peptides to create dynamic, liquid-like droplets through phase separation. This technology allows for the precise concentration of binders upon encountering a target ligand, enabling a versatile platform for resin-free protein purification, high-sensitivity diagnostics, and the creation of slow-release drug depots. It can also function intracellularly to sequester and neutralize harmful proteins associated with viral infections or cancer. The technology is currently at TRL 3 with a patent pending and is available for exclusive or non-exclusive licensing through the Department of Energy contractor, Triad. Key market applications span biopharmaceutical manufacturing, therapeutics, and biotechnology. Interested parties can contact Caleb Ledgerwood or Lindsay Augustyn via the provided licensing email to explore commercial partnerships for this innovation.

Research and Development in Biotechnology (except Nanobiotechnology)

POSTED

DEADLINE

TECHNOLOGY LICENSING OPPORTUNITY: AmineBind ML

Solicitation # S-196258

AmineBind ML is a descriptor-based software and machine learning surrogate model developed by Los Alamos National Laboratory to accelerate the discovery of amine-based carbon capture materials. By utilizing SMILES strings as molecular inputs, the Python-based toolkit predicts CO2 binding energies far more rapidly than traditional density functional theory. The model was trained on approximately 20,000 electronic-structure calculations, allowing researchers to screen millions of candidate chemistries in minutes to identify materials that optimize the balance between CO2 uptake and regeneration temperatures. This technology is particularly applicable to direct air capture, specialty chemicals, and computational chemistry, offering a streamlined pipeline that integrates atomic-scale predictions with mesoscale modeling. Currently at TRL 3 with a patent pending, the software is available for exclusive or non-exclusive licensing through Los Alamos National Laboratory to support the development of high-performance sorbents and the reduction of trial-and-error in laboratory campaigns.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Software Integration & Tool Development (T5032)The Software Integration and Tool Development subcontract under T5032 supports the Department of Energy by developing and maintaining software infrastructure for the SCACS toolkit. The project focuses on software engineering to create APIs for material design engineers and the integration of the Simulator Collection into functional software packages. Technical execution involves the use of Git version control and CI/CD pipelines to ensure the delivery of a deployable software toolkit. This opportunity is managed by Triad, a DOE contractor, with performance taking place in Los Alamos, New Mexico. The contract falls under NAICS code 541511 and was posted on August 18, 2026, with a response deadline of February 16, 2027.

Custom Computer Programming Services

POSTED

DEADLINE

Multiscale Physics Simulation EngineeringThe Multiscale Physics Simulation Engineering subcontract, managed by Triad for the Department of Energy, focuses on integrating high-fidelity atomic physics models into engineering-scale finite element workflows for DOE technology licensees. By embedding machine-learned physics into finite element analysis, the project bridges the gap between atomic-scale simulations and continuum-scale engineering tools to produce a functional multiscale simulation workflow capable of outputting critical hot-spot and current-steering data. This technical effort requires the use of specific FEA software and multiscale modeling toolkits to achieve its objectives. The project is based in Los Alamos, New Mexico, and falls under NAICS code 541330. The response deadline for this opportunity is February 16, 2027.

Engineering Services

POSTED

DEADLINE

AI/ML Model Development (Graph Neural Networks)This subcontract, managed by Triad for the Department of Energy, focuses on the acceleration and optimization of the SCACS platform for DOE technology licensees. The project involves implementing Graph Neural Networks to speed up atomic-site-projected conductivity methods, utilizing million-atom microstructure datasets to train models and optimizing AI inference for physics-grounded predictions. The final deliverable is an optimized and accelerated AI simulation engine. The work will be performed in Los Alamos, New Mexico, and requires the use of High-Performance Computing clusters and GPU acceleration frameworks. The opportunity was posted on August 18, 2026, with a response deadline of February 16, 2027, falling under NAICS code 541511.

Custom Computer Programming Services

POSTED

DEADLINE

Simulator Collection for Atomic to Continuum Scales (SCACS)

Solicitation # S-196281

The Simulator Collection for Atomic to Continuum Scales (SCACS), identified by solicitation number S-196281, is an AI-driven multiscale simulation platform developed by Los Alamos National Laboratory to predict spatially varying, direction-dependent thermal and electrical transport in systems of up to one million atoms. By utilizing proprietary Site-Projected Thermal Conductivity (SPTC-AI) and Site-Projected Electronic Conductivity (SPEC-AI) modules, the toolkit bridges the gap between high-fidelity atomistic physics and continuum-scale engineering models. The system employs graph neural networks and FEniCSx-based solver modules, such as sptc2fem and spec2fem, to generate precise temperature and current maps while maintaining atomic-scale anisotropy. This allows engineers to identify localized hot-spots and transport pathways that are typically missed by conventional continuum models, reducing simulation runtimes from days to minutes. Currently at Technology Readiness Level 4 with a pending U.S. patent and associated software T5032, SCACS is offered as a licensing opportunity through the Richard P. Feynman Center for Innovation. The technology is designed for seamless integration with industry-standard finite-element solvers like Abaqus and has broad commercial applications in semiconductor advanced packaging, fusion energy systems, aerospace, battery thermal management, and quantum device manufacturing. The opportunity is managed by the Department of Energy via Triad, with a response deadline of February 16, 2027.

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

TECHNOLOGY LICENSING OPPORTUNITY: SiloGetter

Solicitation # S-167718

SiloGetter is a technology developed by Los Alamos National Laboratory featuring a 3D-printable siloxane composite designed to capture hydrogen in sealed electronics, vacuum instruments, and metal containers. The material utilizes a palladium-on-carbon catalyst and DEB embedded in a gas-permeable siloxane polymer to absorb over 80 percent of encountered hydrogen. This innovation allows for the creation of custom, high-surface-area shapes via direct ink writing using nozzles as fine as 400 microns, providing a durable alternative to brittle pellets or loose powders. The composite is significantly more efficient than previous versions, carrying roughly 50 percent getter by weight, which is nearly ten times the capacity of earlier materials. It remains chemically stable at temperatures up to 75 degrees Celsius, ensuring mechanical integrity and high absorption efficiency. This technology is particularly applicable for microelectronics packaging, aerospace components, and ultrahigh vacuum scientific instrumentation. The opportunity is currently at TRL 4 with a pending U.S. patent and is available for exclusive or non-exclusive licensing.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Hydrogen-Safe System Integration

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Getter Coating and Thin Film Integration

Semiconductor Machinery Manufacturing

POSTED

DEADLINE

Hydrogen-Scavenging Material Production

Other Basic Inorganic Chemical Manufacturing

POSTED

DEADLINE

TECHNOLOGY LICENSING OPPORTUNITY: Multidimensional Mass Fingerprinting for Antibiotic-Resistant Bacteria (MultiScan-AR)

Solicitation # S-191477

MultiScan-AR, developed by Los Alamos National Laboratory, is a high-resolution diagnostic technology designed to identify pathogens and their antibiotic-resistance profiles in minutes to hours. By utilizing multidimensional tandem mass spectrometry and a specialized data pipeline, the system captures detailed molecular fingerprints that reveal resistance-linked features often invisible to standard strain-typing tools. The technology is compatible with existing benchtop and portable mass spectrometry instruments, allowing clinics and field laboratories to enhance their diagnostic capabilities without requiring new hardware. This technology licensing opportunity is targeted at clinical diagnostics, point-of-care testing, public health biosurveillance, and field-deployable medicine. It aims to reduce reliance on culture-dependent workflows and prior knowledge of suspected organisms, thereby improving treatment decisions and slowing the spread of drug-resistant infections. The opportunity is currently at TRL 3 with a patent pending, and interested parties can pursue exclusive or non-exclusive licensing agreements through the Los Alamos National Laboratory licensing program.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS