Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Structural Repair Design and Sustainment Engineering

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract involves providing engineering services focused on the design and validation of structural repair solutions for damaged or degraded aircraft components. The objective is to ensure continued airworthiness and maintain fleet readiness, supporting sustained operational capabilities. It is a subcontract opportunity issued by the Department of Defense, specifically under the office identified as W6QK Acc-Rsa, with the work to be performed in Huntsville, zip code 35806. The contract falls under the NAICS code 811310, which pertains to commercial and industrial machinery and equipment (except automotive and electronic) repair and maintenance. Although there is no specified type of set-aside or organization type, the solicitation was posted on May 27, 2026. The scope emphasizes engineering expertise in structural repair design and sustainment, critical to the longevity and safety of military aircraft components.

General Info

Provide engineering design and validation for structural repair of military aircraft components in Huntsville.

Agency

Department Of Defense → W6QK Acc-Rsa

NAICS

811310 - Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

Place of Performance

Huntsville, AL, 35806, USA

Set-Aside

NONE

Documents

This scope was carved out of MZB-A-SS26-2387.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Limited Course Justification Award

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedMay 27

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QK Acc-Rsa

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QK Acc-Rsa

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Design and validate structural repair solutions for damaged or degraded aircraft components to maintain airworthiness and fleet readiness.

Similar Contracts

Same NAICS industry code

Kubota M8200 Clutch Replacement

Solicitation # kubota-m8200-clutch-replacement

Management & Training Corporation is soliciting bids for the clutch replacement of a Kubota M8200 tractor with front wheel assist, located at the Earle C. Clements Job Corps Center in Morganfield, Kentucky. The contractor is responsible for providing all transportation, labor, supervision, tools, and materials necessary to diagnose and repair the clutch assembly and power take-off system. The scope of work includes disassembling tractor components, replacing friction discs, bearings, oil seals, and O-rings, resurfacing the flywheel, and replacing hydraulic pipes and filters as needed. All work must be performed according to manufacturer specifications and verified through rigorous testing of clutch engagement and PTO operation under load before final acceptance by the Facility Maintenance Department. This is a fee-for-service contract awarded on a best-value basis, with a submission deadline of November 3, 2026. Eligible bidders include various small business categories, including VOSB, SDVOSB, WOSB, and HUBZone concerns. Proposals must include a bid sheet with a lump sum fee, a completed supplier packet with a W-9, proof of insurance, and detailed information regarding labor, parts, and warranties. The contract incorporates several Federal Acquisition Regulation clauses, including requirements for combating trafficking in persons, equal opportunity for veterans and workers with disabilities, and compliance with Service Contract Labor Standards for wages in Kentucky.

Earle C. Clements Job Corps Center

POSTED

about 7 hours ago

DEADLINE

Bus Fire Suppression System Maintenance

Solicitation # WMATA-0000010906

The Washington Metropolitan Area Transit Authority is seeking proposals for the maintenance of bus fire suppression systems under solicitation number WMATA-0000010906. This procurement falls under NAICS code 811310, focusing on commercial and industrial machinery and equipment repair and maintenance. The solicitation was posted on October 28, 2026, and requires all responses to be submitted by the deadline of November 4, 2026. Interested parties can access further details and manage their bids through the official WMATA supplier portal.

Washington Metropolitan Area Transit Authority

POSTED

about 7 hours ago

DEADLINE

Kubota Excavator Bucket and Plate RepairThis subcontract for the Jefferson Parish Government in Louisiana involves structural metal repair and fabrication for a 2018 Kubota Excavator. The scope of work requires the removal and replacement of the cutting edge on a 24 inch bucket as well as a 1/4 inch steel plate on the back of the machine. The contractor must utilize heavy duty welding and metal cutting tools to deliver a fully repaired excavator with a functional bucket edge and back plate. The project falls under NAICS code 811310 and requires the contractor to maintain Commercial General Liability insurance of 1 million dollars per occurrence. Interested parties must submit their responses by November 4, 2026, at 5:00 PM.

Jefferson Parish Government

POSTED

about 16 hours ago

DEADLINE

Elevators and Chairs Lifts Inspection Maintenance & Repair

Solicitation # 2027-IFB-059

The Charleston County School District is soliciting bids under solicitation number 2027-IFB-059 for the inspection, maintenance, and repair of 78 elevators and chair lifts. The contract is structured for a one-year base period with four optional one-year renewal periods. The scope of work requires a comprehensive preventative maintenance program consisting of quarterly service, including lubrication, testing, and cleaning, as well as emergency repair capabilities to ensure a safe operational environment. All work must adhere to American National Standards Institute (ANSI) codes and best modern practices, with all replacement parts being new. For repairs exceeding 2,500 dollars, the contractor must provide a specific scope of work and quote for authorization. Award will be determined based on a Best Value approach, with price accounting for 60 points of the evaluation. Bidders must provide unit pricing for quarterly inspections, normal and non-normal business hour labor rates, and specific Category 1 and Category 5 test charges. The solicitation requires bidders to disclose any OSHA fines from the last three years and jobsite fatalities from the last five years. Submissions must be made through the designated procurement portal, and the district reserves the right to employ an elevator consultant to evaluate the contractor's performance. All contracts are governed by South Carolina law and require compliance with the Davis-Bacon Act and Equal Employment Opportunity regulations.

Facilities Management

POSTED

about 18 hours ago

DEADLINE

in about 5 hours

WIOHDR30R - Overhead Door Repair and Maintenance- MDOT/SHA Wicomico county

Solicitation # WIOHDR30R

Solicitation WIOHDR30R is an Invitation for Bids issued by the Maryland State Highway Administration for overhead door repair and maintenance services at the Salisbury Shop in Wicomico County. The scope of work includes semi-annual preventative maintenance for 23 doors, totaling six service visits over a three-year period, as well as on-call repair services. The contractor must provide all necessary tools, lubricants, and a 25-foot electric scissor lift, ensuring that all replacement parts are new and of first quality. All work must adhere to manufacturer specifications, building codes, and industry best practices, with the vendor required to rework any faulty workmanship at no cost to the state. This is a single-award contract that will be granted to the responsive and responsible Certified Small Business with the lowest total bid price. To qualify, bidders must be registered with the State Department of Assessments and Taxation and eMaryland Marketplace Advantage, possess at least two years of continuous experience in professional overhead door services, and utilize their own employees rather than subcontractors. Bids must be submitted as a single package via eMMA by November 18, 2026, and must include a signed price form, a bid affidavit, reference checks from the last five years, and documentation of minimum qualifications. Invoicing is permitted up to twice monthly following the acceptance of work.

State Highway Administration

POSTED

about 18 hours ago

DEADLINE

Mower Assembly, Delivery, and Personnel TrainingThis subcontract for the City of Clermont Public Works involves the final assembly, pre-delivery inspection, and transport of six mowers. The selected contractor is responsible for ensuring all units are fully assembled, serviced, and tested before providing F.O.B. Destination delivery to Clermont, Florida. In addition to equipment delivery, the contractor must conduct comprehensive on-site training for personnel covering the safe operation and ongoing maintenance of the machinery. The ultimate goal of the agreement is to provide the agency with fully operational mowers and a staff of trained operators.

Public Services - Public Works

POSTED

about 18 hours ago

DEADLINE

Bumper Crane Specialized InspectionThe Bumper Crane Specialized Inspection subcontract, managed by the California Operations Division, requires qualified crane technicians to perform quarterly inspections of bumper cranes for prime contractors on VTA facility projects. The primary objective of these services is to ensure operational safety and strict adherence to compliance standards, with the successful delivery of detailed quarterly inspection reports as the key deliverable. This opportunity falls under NAICS code 811310 and was posted on October 27, 2026. Interested parties must submit their responses by the deadline of December 10, 2026.

Operations Division

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Bucket Truck Inspection and Dielectric TestingThe Bucket Truck Inspection and Dielectric Testing subcontract, managed by the Operations Division in California, requires a qualified provider to perform critical safety and maintenance services for prime contractors on VTA facility projects. The scope of work includes conducting mechanical inspections, annual dielectric testing to ensure insulation integrity, and quarterly maintenance on bucket truck lifting mechanisms. To ensure compliance and safety standards, the contractor must employ certified dielectric testers. Key deliverables for this engagement include the submission of detailed dielectric test reports and comprehensive quarterly maintenance logs. Interested parties should note that the response deadline for this opportunity is December 10, 2026. The contract falls under NAICS code 811310, focusing on commercial and industrial machinery repair.

Operations Division

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Fall Protection System InspectionThis subcontract opportunity, titled Fall Protection System Inspection, involves performing quarterly safety inspections of horizontal and vertical fall protection systems for prime contractors working on VTA facility projects. The scope of work focuses on inspecting horizontal lifelines and vertical anchors to ensure full compliance with safety regulations, requiring the use of certified fall protection inspectors to deliver detailed inspection reports and safety compliance certifications. The project is managed by the Operations Division in California under NAICS code 811310. Interested parties must submit their responses by the deadline of December 10, 2026. Further details regarding the solicitation can be accessed through the provided procurement portal.

Operations Division

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Crane and Hoist Inspection and Preventive MaintenanceThis subcontract for Crane and Hoist Inspection and Preventive Maintenance involves providing essential safety and maintenance services for VTA facility projects. The scope of work includes performing quarterly, annual, and quadrennial inspections and preventive maintenance on various equipment, specifically monorail cranes ranging from 1/2 to 1 ton, jib cranes up to 2 tons, and underhung cranes. The selected contractor is responsible for ensuring regulatory compliance by filing mandatory Certificates of Testing with the California Department of Industrial Relations. Key deliverables include the submission of completed inspection reports and the verified filed certificates. This opportunity is managed by the Operations Division in California, with a response deadline set for December 10, 2026.

Operations Division

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Commercial Fitness Equipment Preventative Maintenance and RepairThis subcontract opportunity is for the provision of on-site preventative maintenance and repair services for commercial fitness equipment within the City of Pittsburgh Department of Parks and Recreation. The selected contractor will be responsible for performing quarterly maintenance according to manufacturer guidelines for brands such as Nautilus, Precor, and Life Fitness. Key deliverables include the completion of deficiency checklists and the submission of detailed maintenance reports, with a requirement to respond to all service requests within one business day. To be eligible, the contractor must be an Authorized Service Provider. This project falls under NAICS code 811310 and is intended for prime contractors working on city projects. Interested parties must submit their responses by November 23, 2026, at 5:00 PM.

Parks & Recreation

POSTED

about 20 hours ago

DEADLINE

Fitness Equipment & Repairs

Solicitation # 2026-IFB-223

The City of Pittsburgh Office of Management and Budget, on behalf of the Department of Parks and Recreation, is soliciting bids under solicitation number 2026-IFB-223 for the purchase of fitness equipment and associated repairs. The contract covers services at various recreation and Healthy Active Living center fitness rooms, with a primary performance period from December 1, 2026, through November 30, 2028, and two optional one-year renewals. The selected contractor must be an authorized equipment distributor or service provider for manufacturers such as Nautilus, Precor, Life Fitness, and Matrix. Key deliverables include quarterly preventative maintenance for each piece of equipment, the submission of completed checklists to facility supervisors, and scheduled replacement recommendations based on maintenance findings. The contract will be awarded to the lowest responsive and responsible bidder. Bidders must provide a Performance Bond and Payment Bond each equal to 100 percent of the contract price within ten days of the award notice. Compliance requirements include adherence to the Americans with Disabilities Act, the Pittsburgh Code of Ordinances regarding non-discrimination, and the City Service Worker Prevailing Wage Ordinance. Additionally, the city has established participation goals for minority-owned, women-owned, LGBTQIA+-owned, and veteran-owned small businesses, with a specific minimum goal of five percent participation for veteran-owned small businesses. Bids must be submitted electronically by November 23, 2026, and include a vendor questionnaire, W-9, and required certification forms. Payment for services is intended to be processed within 45 calendar days of invoicing, provided invoices are submitted within 30 days of work completion.

Parks & Recreation

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → W6QK Acc-Rsa

Same awarding agency

Aerospace Hardware & Seal SupplyThis small business set-aside subcontract, managed by the Department of Defense agency W6QK Acc-Rsa, involves the supply of aviation-grade seals, gaskets, fasteners, and O-rings for prime contractors working on Department of the Army UH-60 helicopter projects. The provider is responsible for sourcing certified aerospace-grade elastomers and hardware that strictly adhere to OEM specifications and the Buy American Statute. Key deliverables include the provision of certified hardware kits and the implementation of unique item identifiers for embedded subassemblies. The opportunity is categorized under NAICS code 423840, with a response deadline set for December 1, 2026.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

in about 1 month

Specialized NDT (Non-Destructive Testing) ServicesThis small business set-aside subcontract involves providing specialized non-destructive testing services for Department of the Army UH-60 helicopter projects. The contractor is responsible for detecting cracks, corrosion, and catastrophic damage using ultrasonic equipment and inspection kits through methods such as X-ray, Magnetic Particle, and Dye Penetrant testing. All work must be performed by personnel holding NAS410 or equivalent certification to ensure the delivery of accurate inspection reports and airworthiness certifications. Managed by the Department of Defense under agency W6QK Acc-Rsa, the opportunity falls under NAICS code 811310. Interested parties must submit their responses by the deadline of December 1, 2026.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Precision Machining & Component FabricationThis subcontract, titled Precision Machining and Component Fabrication, involves the production of replacement parts, brackets, and housings for gearbox radiator assemblies used in Department of the Army UH-60 helicopter projects. The scope of work requires the use of CNC machining, milling, and turning to process aerospace-grade alloys in strict accordance with form, fit, and function technical data. All deliverables must comply with the Buy American Statute to ensure the delivery of qualified machined replacement components. Managed by the Department of Defense under agency W6QK Acc-Rsa, this opportunity is designated as a Total Small Business Set Aside under NAICS code 332710. The solicitation was posted on October 27, 2026, with a response deadline set for December 1, 2026.

POSTED

DEADLINE

in about 1 month

Radiator Core & Heat Exchanger RepairThis small business set-aside subcontract, managed by the Department of Defense agency W6QK Acc-Rsa, involves specialized repair, cleaning, and refurbishment of radiator cores and heat exchanger elements. The work supports prime contractors on Department of the Army UH-60 helicopter projects to ensure components meet continued airworthiness standards. Technical requirements include chemical cleaning, pressure leak testing using specialized rigs, brazing, soldering, and fin straightening. The opportunity is categorized under NAICS code 811310 and was posted on October 27, 2026, with a response deadline of December 1, 2026. The selected contractor will be responsible for utilizing industrial cleaning solvents and pressure testing equipment to deliver fully refurbished heat exchangers and radiator cores.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

in about 1 month

Pre-Solicitation Synopsis for the Overhaul of the CH-47 Swashplate, Controllable

Solicitation # W58RGZ-27-R-A021

POSTED

DEADLINE

Amendment 0004 Overhaul of RADIATOR GEARBOX

Solicitation # W58RGZ-26-B-0016

Solicitation W58RGZ-26-B-0016 is a total small business set-aside for the inspection and overhaul of UH-60 radiator gearboxes (NSN 1615-01-158-9514, P/N 70361-03004-103) to ensure continued airworthiness per Army Regulation 70-62. The contract is structured as a five-year Firm-Fixed-Price Indefinite Delivery Indefinite Quantity (IDIQ) agreement. The scope includes the disassembly, inspection, and repair of components, with specific deliverables including overhauled units, scrap management for assets beyond economical repair, and the provision of required containers. Award will be granted to the responsive and responsible bidder offering the lowest total price based on the provided pricing template. Amendment 0004 extends the proposal submission deadline to November 30, 2026, at 5:00 PM CST, due to the discontinuation of PADDS. Eligible bidders must be registered in SAM.gov under NAICS code 336413. Key requirements include compliance with ISO 9001:2000 quality standards, CMMC level 2 self-assessment, and strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-130N for item unique identification. Invoicing and receiving reports are managed through the Wide Area WorkFlow (WAWF) system. Performance involves a tiered delivery schedule, with initial Product Verification Audit assets due 60 days after award and subsequent overhauled units delivered at a maximum rate of 12 per month.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

in about 1 month

Military Plans Specialist Support ServicesThe Military Plans Specialist Support Services subcontract provides operational and strategic planning advisory support for prime contractors on W6QK Acc-Rsa projects located in Jordan. The scope of work involves developing physical security and force protection plans, leading crisis action and deliberate planning through JOPES and APEX, and supporting military exercises using MDMP and JOPP. Key deliverables include the production of formal military orders, executive briefings, and comprehensive force protection strategies. Qualified personnel must possess an active Secret security clearance and maintain CENTCOM theater entry eligibility. This opportunity falls under NAICS code 541611 and is associated with the Department of Defense. Interested parties should note the response deadline of November 4, 2026.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Military Plans Specialist Support Services

Solicitation # ASGJOCS0011

The Military Plans Specialist Support Services contract, solicitation number ASGJOCS0011, provides operational and strategic planning advisory support to the Area Support Group-Jordan (ASG-J) Operations Directorate (S-3). The contractor is responsible for coordinating and executing operational and contingency plans, exercises, and force protection programs to support United States Army Central (USARCENT) and USCENTCOM entities. Key duties include developing physical security and force protection plans (30%), leading deliberate and crisis action planning using JOPES/APEX (30%), supporting exercises through the Military Decision Making Process and Joint Operational Planning Process (20%), and providing inter-agency representation and staff coordination (20%). Personnel must possess an active Secret security clearance, meet CENTCOM medical and theater entry requirements, and be eligible for overseas travel, with anticipated business travel within the USCENTCOM area of responsibility up to 20% of the time. The position follows a standard civilian non-personal service baseline per FAR 37.104, with a typical work week of Sunday through Thursday and approximately 1,920 productive hours per year. Required expertise includes proficiency in Army regulations regarding Base Operations Support-Integrator (BOS-I), the U.S.-Jordanian Defense Cooperation Agreement, and the ability to author formal military orders and executive briefings. The submission deadline for this sources-sought effort is November 4, 2026.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Supply of Anchor Plate, Wire RThis small business set-aside subcontract, issued by the Department of Defense agency W6QK Acc-Rsa, requires the manufacture and supply of 254 specialized Wire R anchor plates, part number 10252128-39. The project is designated for prime contractors supporting defense procurement and will be performed at Fort Bliss, Texas. The contractor must adhere to strict quality and packaging standards, including MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130, while ensuring all wood materials are ISPM 15 compliant. Mandatory qualifications include ANSI/ISO/ASQ 9001:2015 or AS 9100 certification and access to the Joint Certification Program. Responses for this opportunity are due by December 2, 2026.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Anchor Plate, Wire R

Solicitation # W31P4Q27RA011

Solicitation W31P4Q27RA011 is a 100% small business set-aside for a firm fixed price, one-time buy contract to manufacture 254 units of Anchor Plate, Wire R, part number 10252128-39, under NAICS code 332510. The procurement is managed by the Department of Defense for the M-D6 weapon system, with delivery set for Fort Bliss, Texas, on a FOB Destination basis. Award will be granted to the responsive and responsible offeror representing the lowest overall cost to the government. Eligible vendors must maintain an active certification in the Joint Certification Program to request necessary drawings from the contracting office. The contractor is required to adhere to high-level quality standards, specifically ANSI/ISO/ASQ 9001:2015 or AS 9100. Strict compliance is required for packaging and marking per MIL-STD-2073-1, MIL-STD-129, and MIL-STD-130, including the use of ISPM 15 compliant wood packaging materials. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Hardware Manufacturing

POSTED

DEADLINE

in about 1 month

Sources Sought for Overhaul/Repair/Upgrade of the UH-60/AH-64 T700 Turbine Engine Supervisory Control Unit

Solicitation # W58RGZ-27-R-A016

This sources sought announcement is issued by the Department of Defense to conduct market research for the overhaul, repair, and upgrade of Turbine Engine Supervisory Control Units. The requirement covers a quantity range between 150 and 1,860 units, which includes 310 units designated for Foreign Military Sales. The effort falls under NAICS code 336412 with a size standard of 1,500 employees. While Triumph Engine Control Systems, LLC is currently the only known approved source, the government is seeking to identify other potential capable sources to determine the feasibility of a competitive acquisition. Interested parties must submit their company name, business size, socio-economic status, and detailed point of contact information to the designated contract specialist. This notice is for planning purposes only and does not constitute a request for proposal or a commitment from the government. Because a Depot Maintenance Work Requirement is unavailable, contractors are encouraged to pursue Source Approval Requests to become an approved provider. All responses must be submitted electronically by the specified deadline.

Aircraft Engine and Engine Parts Manufacturing

POSTED

DEADLINE

DoD Unique Identification (UID) MarkingThis subcontract involves the permanent marking of compressor units for prime contractors supporting US Army Aviation and Missiles Command projects. The scope of work requires the use of industrial laser marking systems to perform laser etching or tagging of components, ensuring full traceability and compliance with DFARS 252.211-7003. The final deliverables must be units featuring verified, scannable Department of Defense unique identification marks. Managed by the Department of Defense agency W6QK Acc-Rsa, the work is to be performed at Fort Bliss, Texas. The opportunity was posted on October 15, 2026, with a response deadline of November 26, 2026. The project falls under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Post-Installation Warranty and Maintenance Support

257-NETWORK Contract Office 17 (36C257)

POSTED

CLOSED

PBA Industrial Equipment Maintenance FY26

Solicitation # W519TC26QA124

POSTED

CLOSED

USNS BURLINGTON MAIN PROPULSION DIESEL ENGINES MAINTENANCE AND REPAIRS

Solicitation # N3220526Q7166

POSTED

CLOSED

J--R6 HEAVY EQUIPMENT BPA - Setup

Solicitation # 140F0S25Q0011

Over Sat G/s Fws

POSTED

DEADLINE

J045--Heater Bundle Replacement in Boiler Plant One time Repair

Solicitation # 36C25926Q0493

Network Contract Office 19 (36C259)

POSTED

CLOSED

HVAC Preventive Maintenance Services for National Weather Service Offices in Honolulu, Lihue and Kahului.

Solicitation # 142060-26-0022

Department Of Commerce Noaa

POSTED

CLOSED

RFI -Bearcat Maintenance Services

Solicitation # RFI05122026

POSTED

CLOSED

TheroFisher Fourier Transform Infrared Spectrometer Repair

Solicitation # N6660426Q0320

Nuwc Division Newport

POSTED

CLOSED

Self Contained Breathing Apparatus (SCBA) Flow Testing and Cleaning

Solicitation # M0068126Q0050

Commanding General

POSTED

CLOSED

Fire System Repairs at the FEMA Selma Transportable Housing Storage Site (THSS)

Solicitation # 70FB8026I00000008

Community Survivor Assistance SEC

POSTED

CLOSED

Elevated Work Platform (EWP) Systems Maintenance and Repair

Solicitation # FA442726P0036

FA4427 60 Cons Lgc

POSTED

DEADLINE

Hanel Rotomat Storage Maintenance

Solicitation # RFI1813769

FA4484 87 Cons Pk

POSTED

CLOSED

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS