Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Backflow Valve Replacement Parts and Components

Active

Federal

Response Deadline08/20/2026, 04:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the supply of OEM or approved replacement parts for backflow prevention assemblies, including components such as check valves, relief valves, seals, gaskets, test cocks, and repair kits. These parts must meet stringent quality and compatibility standards to ensure the safe and reliable operation of backflow prevention systems. The procurement is structured as a subcontract under a Small Business Set Aside designation, exclusively available to small businesses, and is classified under NAICS code 423730 for plumbing and heating equipment and supplies merchant wholesalers. The solicitation was posted on August 4, 2026, with a response deadline of August 20, 2026, at 4:00 PM. Performance of the contract is expected to occur in San Francisco, California, with a ZIP code of 94128. The contracting agency is the Department of Homeland Security, operating through Base ALAMEDA, and interested parties must submit responses through the official SAM.gov portal. The nature of the requirement emphasizes adherence to approved technical specifications and availability of parts to support ongoing maintenance and compliance with water safety regulations.

General Info

Small business subcontract for OEM backflow parts in San Francisco, DHS procurement, SAM.gov submission.

Agency

Department Of Homeland Security → Base ALAMEDA(00031)View Agency

NAICS

423730 - Warm Air Heating and Air-Conditioning Equipment and Supplies Merchant WholesalersView NAICS

Place of Performance

San Francisco, CA, 94128, USA

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 20

Submission deadline

Response Deadline

08/20/2026, 04:00:00 PM UTCin 15 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Homeland Security → Base ALAMEDA(00031)

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Homeland Security → Base ALAMEDA(00031)

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide OEM or approved replacement parts for backflow prevention assemblies such as check valves, relief valves, seals, gaskets, test cocks, and repair kits.

Similar Contracts

Same NAICS industry code

Supply of Commercial Walk-In Refrigeration Doors and ComponentsThe contract seeks the supply of three commercial-grade walk-in refrigeration doors complete with all necessary components including gaskets, hinges, latches, seals, and hardware, ensuring full compliance with manufacturer specifications and industry standards for commercial refrigeration systems. All components must meet rigorous performance and safety requirements to guarantee durability, energy efficiency, and proper sealing under continuous operational use in commercial environments. This is a subcontract under a Small Business set-aside program, open exclusively to SBA-certified small business categories including Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business. The North American Industry Classification System code is 423730, indicating distribution of building materials and supplies for plumbing and heating equipment. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and the performance location and point of contact information are not specified, though the opportunity is accessible via the SBA’s online procurement portal.

Management & Training Corporation

POSTED

about 23 hours ago

DEADLINE

HVAC Equipment and Materials SupplyGwinnett County Public Schools is seeking subcontractors to supply HVAC units, ductwork, controls, thermostats, and related components in full compliance with public school specifications. The solicitation, posted on August 4, 2026, requires responses by September 10, 2026, at 8:00 PM, and is classified as a subcontract under NAICS code 423730 for HVAC equipment distribution. All materials must meet the technical and quality standards established by the school district, ensuring compatibility, durability, and energy efficiency for educational facilities. The place of performance and specific delivery locations are not detailed in the posted data, but the work is intended to support infrastructure upgrades across Gwinnett County schools in Georgia. Subcontractors must be prepared to fulfill the full scope of supply requirements with no deviations from established specifications, and all proposals should be submitted through the official state procurement portal linked in the solicitation.

Gwinnett County Public Schools

POSTED

DEADLINE

in about 1 month

Flooring Materials SupplyThe contract requires the supply of all necessary flooring materials including sheet vinyl, vinyl composite tile, adhesives, transition strips, and underlayment, all of which must comply with the project’s technical specifications. Along with the materials, detailed technical documentation must be provided to ensure proper installation and compliance, and all items must be delivered directly to the designated job site in Redwood City, California, with a ZIP code of 94065. The procurement is structured as a subcontract under NAICS code 423730, which relates to building material and supplies merchant wholesaling. The solicitation was posted on August 4, 2026, with a firm deadline for responses set for August 12, 2026, at 9:45 p.m. The contracting authority is the City of Redwood City, California, and interested parties must submit their bids through the provided online portal.

City of Redwood City

POSTED

DEADLINE

Material Supply – Irrigation Components and PipingThe contract is for the supply of all specified irrigation components and piping, including PVC piping, sprinkler heads, control valves, wiring, and valve boxes, with mandatory certified product data and test reports to ensure compliance and quality. All materials must meet required standards and be accompanied by proper documentation certifying performance and reliability. This is a subcontract under a Small Business Set Aside classification, designated as a total set-aside for small businesses, and is classified under NAICS code 423730 for wholesale trade of agricultural supply materials. The opportunity was posted on August 4, 2026, with a response deadline of August 20, 2026, and is managed by the Department of Defense through its DCSo Richmond Division #1, with performance expected to be carried out at a location with zip code 23237.

Dcso Richmond Division #1

POSTED

DEADLINE

Major Equipment and Material Supply

San Mateo County Community College District

POSTED

DEADLINE

HVAC System Component Supply and Replacement Parts ProvisionThe City of Vernon is seeking a subcontractor to supply replacement HVAC system components including compressors, thermostats, fans, motors, coils, and refrigerants to support ongoing repair operations. The contract requires timely delivery of these critical parts to ensure minimal disruption to building systems and maintain operational continuity across municipal facilities. The solicitation is open for responses through August 12, 2026, and the work must be performed at or delivered to Vernon, California, with the zip code 90058. The NAICS code 423730 indicates this is categorized under HVAC and Refrigeration Equipment and Supplies Merchant Wholesalers. The nature of the contract as a subcontract suggests the winning party will likely provide parts to another contractor or vendor already engaged in maintenance or repair services for the city.

POSTED

DEADLINE

Plumbing Materials and Fixtures SupplyThe City of Mountain View is seeking suppliers to provide approved plumbing materials and fixtures for use in repairs and installations across its facilities. The contract covers a wide range of essential components including pipes, fittings, valves, fixtures, water heaters, and related plumbing system elements, all of which must meet specified standards for quality and compatibility with municipal infrastructure. This subcontract opportunity is open to qualified vendors capable of reliably delivering these materials to support ongoing maintenance and construction needs within the city. The solicitation was posted on August 4, 2026, with a response deadline of September 3, 2026, at 10:00 PM Pacific Time. The North American Industry Classification System code for this procurement is 423730, which corresponds to plumbing, heating, and air-conditioning equipment and supplies merchant wholesalers. Performance of the contract will be centered in Mountain View, California, with a designated zip code of 94041. Bidders must ensure compliance with all technical and logistical requirements for supplying materials to city facilities, though no specific set-aside preferences or organizational type restrictions are indicated. Interested parties can access the full solicitation details through the provided online portal.

City of Mountain View

POSTED

DEADLINE

Supply of OEM Water Heater ComponentsThe contract calls for the supply of original equipment manufacturer replacement parts for the AquaPlex Turbopower 96 water heater, specifically including the blower motor, gas valve, ignitor, gasket, and flame rod. All components must be genuine OEM parts with accompanying compatibility documentation to ensure proper function and safety in the existing system. Delivery is required directly to the job site, with no intermediaries, and the supplier must guarantee that each part meets the original specifications to avoid performance issues or system failure. This is a subcontract under the Small Business Administration set-aside program, reserved exclusively for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business entities. The NAICS code 423730 indicates the scope pertains to plumbing, heating, and air-conditioning equipment and supplies merchant wholesalers. The solicitation was posted on August 4, 2026, with a firm response deadline of August 14, 2026, and is managed by Adams & Associates Keystone Red Rock Job Corps. All bids must adhere to SBA certification requirements, and performance is expected to comply with federal procurement standards even though the place of performance and contact details are not specified.

Adams & Associates Keystone Red Rock Job Corps

POSTED

DEADLINE

HVAC Equipment Supply (Condenser Units and Coils)Exceed, LLC dba Pinellas County Job Corps Center is seeking to procure two commercial condensing units, one rated at 20 tons and the other at 15 tons, along with an OEM DX cooling coil, all of which must comply with Energy Star and Federal Energy Management Program standards. The equipment must utilize either R-32 or R-454B refrigerant to meet current environmental and efficiency requirements. This subcontract is set aside for small business concerns including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses, ensuring priority consideration for eligible disadvantaged and veteran-owned enterprises. The solicitation was posted on August 4, 2026, with responses due by August 7, 2026, and the North American Industry Classification System code is 423730, indicating the focus on wholesale trade of heating, air-conditioning, and refrigeration equipment. The place of performance and agency address details are not specified, but the contract is linked to the Pinellas County Job Corps Center through the SBA opportunity portal.

Exceed, LLC dba Pinellas County Job Corps Center

POSTED

DEADLINE

HVAC Equipment and Furnace SupplyAdams & Associates, Inc. is seeking a small business supplier to provide a new furnace unit that meets specific efficiency, size, and fuel type requirements for installation at a Job Corps Center. The contract encompasses the full scope of delivery and handling necessary for proper installation, ensuring the equipment is transported and prepared in accordance with facility standards. This is a subcontract under a small business set-aside program that prioritizes eligibility for Small Business, Small Disadvantaged Business, Women-Owned Small Business, HUBZone Small Business, Veteran-Owned Small Business, and Service-Disabled Veteran-Owned Small Business concerns. The North American Industry Classification System code for this opportunity is 423730, indicating it falls under plumbing, heating, and air-conditioning equipment and supplies merchant wholesalers. Responses are required by August 7, 2026, with the solicitation posted on August 4, 2026, and the performance location is tied to the Job Corps Center where the HVAC replacement is needed.

Adams & Associates, Inc.

POSTED

DEADLINE

Specialty Trade Coordination & SupplierThe contract titled Specialty Trade Coordination & Supplier is a subcontract under the SBA set-aside programs, designated for small businesses including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. It involves the supply of essential construction materials such as drywall, paint, light fixtures, and plumbing fixtures, along with the coordination of specialty trades required for project execution. The scope may also include support for hazardous material abatement activities, necessitating expertise in compliant and safe handling procedures. The solicitation was posted on August 4, 2026, with a response deadline of August 20, 2026, and is classified under NAICS code 423730, which pertains to building material and supplies merchant wholesalers. The contract is managed by the Management & Training Corporation, with performance likely tied to the Maui HBI Classroom Repair project as indicated by the provided UI link, though specific location details are not enumerated. Participation is restricted to eligible small business concerns certified under SBA programs, emphasizing support for underserved and veteran-owned enterprise participation in federal contracting.

Management & Training Corporation

POSTED

DEADLINE

Specialty Piping Materials SupplyThe contract seeks the supply of underground piping materials including HDPE, PVC, and steel pipe along with associated fittings, valves, and related components for use in infrastructure projects under the jurisdiction of Montana. The scope encompasses the provision of high-quality, code-compliant materials suitable for long-term underground installation, with an emphasis on reliability and durability under varied environmental conditions. The vendor is expected to support just-in-time delivery schedules and provide comprehensive logistics coordination to ensure timely and efficient material placement at project sites. The solicitation is structured as a subcontract and falls under NAICS code 423730, which corresponds to plumbing and heating equipment and supplies merchant wholesalers. Responses are due by August 24, 2026, with the opportunity posted on August 3, 2026. The place of performance and exact delivery locations are not specified in the data, indicating that work may be distributed across multiple sites within Montana. Interested parties must engage through the provided online portal to submit proposals, and the contract does not indicate any set-aside provisions for small businesses or other designated categories.

POSTED

DEADLINE

More opportunities from Department Of Homeland Security → Base ALAMEDA(00031)

Same awarding agency

Compliance Documentation and Reporting ServicesThe contract titled Compliance Documentation and Reporting Services is a small business set aside awarded under the SBA program, targeting qualified small businesses to provide comprehensive compliance documentation services. Responsibilities include preparing and submitting detailed compliance reports, test records, repair logs, and certification forms that meet both federal and local regulatory standards, with particular emphasis on the secure handling and protection of personal data. The work is performance-based and must adhere to strict regulatory frameworks to ensure operational and legal compliance for the Department of Homeland Security. The contract is associated with NAICS code 541611 and is to be performed at a specified location in San Francisco with a ZIP code of 94128. It was posted on August 4, 2026, with a response deadline of August 20, 2026. This is a subcontract opportunity under the Base ALAMEDA (00031) agency, with the parent organization being the Department of Homeland Security. All submissions must meet the required compliance and data security protocols, and bidders are expected to demonstrate capability in managing regulated documentation workflows within a federal government environment.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Mandatory Site Visit Support and Access CoordinationThe contract requires support to a prime contractor in executing a mandatory site visit at a facility in San Francisco, ZIP 94128, under the jurisdiction of the Department of Homeland Security at Base ALAMEDA. The subcontractor must coordinate and secure necessary base access permissions, participate in the on-site walk-through, gather field data, and accurately document the conditions and precise locations of valves. This effort is critical to fulfilling contractual obligations tied to the prime’s broader scope and must be completed by the response deadline of August 20, 2026. The solicitation is designated as a Small Business Set Aside, total, with NAICS code 541620, indicating it falls under Engineering Services and is reserved exclusively for small businesses. All activities must align with federal security protocols and occur within the designated performance location without deviation.

Environmental Consulting Services

POSTED

DEADLINE

Backflow Prevention Device Testing and RepairThe contract requires the inspection, testing, repair, and routine maintenance of backflow prevention assemblies to ensure full compliance with applicable codes and standards. This includes the complete disassembly of units, replacement of defective or worn components, reassembly, and rigorous pressure testing to verify proper functionality. All work must be performed to industry best practices and regulatory requirements, ensuring the protection of public water supplies from contamination risks. This is a Small Business Set Aside subcontract under NAICS code 238220, issued by the Department of Homeland Security through Base ALAMEDA. The opportunity is open for response until August 20, 2026, with performance expected to take place in San Francisco, ZIP 94128. The contracting vehicle is specifically reserved for small businesses, emphasizing support for qualified small business contractors to fulfill essential public health and safety infrastructure maintenance.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Replacement of Pollution Boom at Base Alameda

Solicitation # 31090PR260000346

This contract is a total small business set-aside under FAR 19.5 for the replacement of a pollution boom at Base Alameda in California, with the NAICS code 237990 indicating it falls under other heavy and civil engineering construction. The solicitation, numbered 31090PR260000346, was posted on July 20, 2026, and responses are due by email to the contracting officer and contract specialist no later than August 7, 2026. A single, optional site visit is available for interested offerors, and questions must be submitted by July 31, 2026, to ensure timely responses prior to the closing of the solicitation. The contractor is required to perform all tasks specified in the Statement of Work as well as any implied tasks necessary to complete the pollution boom replacement, with the performance location firmly established at Alameda, CA, 94501. While the contract does not specify pricing, delivery schedules, FOB terms, or detailed evaluation factors in the available documentation, it is understood that the work will be inspected and accepted at the performance site by the Government, represented by the Department of Homeland Security through Base Alameda. All submissions must be submitted electronically via email, and while attachments to the solicitation contain essential details including the full Statement of Work, those documents are not included in the provided metadata. The set-aside status restricts eligibility exclusively to qualified small businesses, and no other socioeconomic preferences or special requirements such as security clearances, key personnel designations, or option clauses are referenced. No payment office, invoicing method, contracting officer’s representative, or accounting data is explicitly provided; therefore, offerors must rely on the point of contact information to clarify administrative requirements.

Other Heavy and Civil Engineering Construction

POSTED

DEADLINE

Backflow Valve Assembly Repair

Solicitation # 20180PR260000071

This solicitation for Backflow Valve Assembly Repair is set aside exclusively for small businesses and is issued under NAICS code 238220 by the Department of Homeland Security, through Base ALAMEDA (00031), with the contracting office located in Alameda, CA. The work is to be performed in San Francisco, CA, with a submission deadline of August 20, 2026, at 4:00 PM. A mandatory site visit is scheduled for August 13, 2026, at 11:00 AM, and interested vendors must submit a completed BASE ACCESS LIST to both the primary and secondary points of contact to gain entry. All questions must be submitted by August 14, 2026, to ensure timely response prior to proposal closing. Offers must be emailed to the designated contracting officer and contract specialist, with no alternative submission method specified. The Statement of Work requires the contractor to perform all specified and implied tasks necessary for valve assembly repair, though detailed technical specifications, performance standards, and deliverables are contained in attachments not available here. No contract value, pricing details, evaluation factors, inspection criteria, packaging requirements, or invoicing procedures are provided in the available information, and no FAR clauses, representations, or socioeconomic certifications beyond the small business set-aside designation are explicitly outlined. The solicitation does not indicate the presence of options, key personnel requirements, organizational conflict of interest provisions, or formal security clearance levels, though base access control necessitates personal identification submission. The contract type is listed as “combined,” and no amendments are noted. Offerors are expected to fully comply with all requirements stated in the full solicitation package, including any unstated technical or administrative conditions embedded in the supporting documents.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

DEADLINE

Forklift Purchase

Solicitation # 71111PR260000205

The U.S. Coast Guard is seeking a single diesel-powered pneumatic forklift, specifically a Kalmar DCG160-12 model, for use on the pier at Yerba Buena Island in San Francisco, California. The forklift must have a lift capacity of 36,000 pounds with a 1,200 mm load center and be equipped with a mast revised per Amendment 001 to accommodate lifting large buoys up to 9 feet in diameter and 35 feet in length using a sling through the top bale, rather than scooping from below; this modification is essential for safely moving buoys on and off semi-truck beds during transportation to refurbishment centers. Additional required features include an overhead guard with rear-view mirrors, standard forks measuring approximately 94 inches by 8 inches by 4 inches, and pneumatic tires. The requirement is branded name only, and delivery must be FOB destination to the specified location. This solicitation, numbered 71111PR260000205, is issued as a combined synopsis under FAR subpart 12.6 and is a small business set aside under NAICS code 423830 for industrial machinery wholesalers, classified under PSC code 3930 for self-propelled warehouse trucks. Offers must be submitted via email to the contracting officer and contract specialist by August 10, 2026, and must include technical specifications, total price with shipping, estimated delivery date, and the point of contact with legal authority to bind the company. All offerors must maintain an active SAM.gov registration and have completed the FAR 52.212-3 representations and certifications, excluding paragraphs (d) and (t). Offers must remain valid for at least 30 days, and the government will award to the lowest-priced technically acceptable offer. Applicable clauses include those on trafficking in persons, text messaging while driving, and payment via electronic funds transfer.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Replace Corroded Cleat on Base Alameda Pier

Solicitation # 31090PR260000347

This solicitation, numbered 31090PR260000347, is a small business set-aside under FAR 19.5 for the replacement of Cleat #16:J at Coast Guard Base Alameda in California, with a estimated contract value between $25,000 and $100,000. The work involves full removal of the existing cleat and installation of a new 24-inch, 15-ton capacity cleat with a powder-coated finish matching the existing infrastructure, all to be completed within 60 calendar days after the Notice to Proceed. Performance must occur on Coast Guard Island, Alameda, with strict coordination required around active cutter operations, adherence to OSHA regulations, the U.S. Coast Guard Safety and Environmental Health Manual COMDTINST M5100.47, and all applicable federal, state, and local codes. The procurement follows a Lowest Price Technically Acceptable (LPTA) strategy, where offers are first evaluated for technical acceptability—requiring complete and reasonable addressing of the Statement of Work—and only technically acceptable offers are considered for award based on the lowest price. Offers must be submitted via email to the contracting officer and contract specialist by 19:00 Eastern Time on July 31, 2026, with submissions limited to 9MB per email and required to be on company letterhead, including SAM representation, technical approach, and detailed pricing. A single site visit is permitted, requiring prior coordination with the primary and secondary points of contact. Contract administration is governed by a Firm Fixed Price structure with invoicing exclusively through the Invoice Processing Platform, and payment is processed via the USCG Finance Center in Chesapeake, Virginia. Contractors must comply with stringent access and security requirements, including mandatory U.S. citizenship or lawful permanent residency for all personnel, completion of background investigations for facility access, CUI handling training, and flow-down of security clauses to subcontractors. Clause 52.204-9 mandates personal identity verification, and all contractors must maintain current SAM registration, including UEI and CAGE codes, with additional disclosures required if using covered telecommunications equipment. The contract includes no specified packaging, marking, or bar-coding requirements, and all deliverables must be fully cleaned up and restored upon completion.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Environmental Compliance and CUI SupportThe subcontract titled Environmental Compliance and CUI Support is set to assist a prime contractor with critical federal regulatory functions, including environmental compliance reporting, controlled unclassified information (CUI) management, training recordkeeping, and the proper flow-down of federal requirements to subcontractors and team members. The work is specifically focused on ensuring adherence to federal standards related to environmental regulations and information security, with an emphasis on accurate documentation and operational compliance. The contract is designated as a Small Business Set Aside under NAICS code 541620, indicating it is reserved for small business concerns, and is managed by the Department of Homeland Security through its Base Alameda office. Performance of the contract will be based in McKinleyville, California, with a zip code of 95519, and all work must be completed in accordance with federal guidelines governing CUI handling and environmental reporting. The opportunity was posted on July 28, 2026, with a response deadline of August 21, 2026, at 7:00 PM Eastern Time, leaving potential bidders a limited window to submit proposals. There is no identified point of contact for inquiries, and all submissions must be made through the SAM.gov portal using the provided link to ensure formal consideration. The nature of the work demands strong familiarity with federal compliance systems and the ability to support prime contractor obligations under DHS directives.

Environmental Consulting Services

POSTED

DEADLINE

Jet Fuel Hauling and TransportationThe contract titled Jet Fuel Hauling and Transportation involves the safe and compliant movement of evacuated Jet A fuel from a designated site to an approved disposal or recycling facility, adhering strictly to all applicable Department of Transportation and Environmental Protection Agency hazardous materials regulations. The work is classified as a subcontract under a Small Business Set Aside, designated for total small business participation, and is governed by the NAICS code 484220 for hazardous waste transportation. Performance is required to occur in McKinleyville, California, with a zip code of 95519, and all activities must ensure environmental safety, regulatory compliance, and proper documentation throughout the hauling process. The solicitation was posted on July 28, 2026, with a response deadline of August 21, 2026, at 7:00 PM local time. The contracting agency is the Department of Homeland Security, operating under Base ALAMEDA(00031), and the work is intended to support federal obligations related to hazardous material management. Only small business entities eligible under SBA guidelines may submit bids, and the contractor must have the necessary certifications, equipment, and trained personnel to handle Jet A fuel as a Class 3 flammable liquid under hazmat standards. Failure to meet regulatory requirements or missed deadlines will result in disqualification, and the selected vendor will be expected to maintain ongoing compliance during operations.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Fuel Tank Evacuation and Hazardous Waste Disposal ServiceThe contract requires the complete evacuation, cleaning, and disposal of residual Jet A fuel from storage tanks at USCG Sector Humboldt Bay in McKinleyville, California, with strict adherence to EPA and OSHA regulations throughout all phases. The scope includes safe containment of hazardous materials, transportation to approved disposal facilities, and proper documentation to ensure full regulatory compliance. The work must be performed by a qualified contractor capable of handling hazardous waste under federal environmental and occupational safety standards. This is a Small Business Set Aside subcontract under NAICS code 562910 for hazardous waste collection and treatment, intended solely for small businesses. The solicitation was posted on July 28, 2026, with a response deadline of August 21, 2026, and the performance location is specifically designated as McKinleyville, ZIP 95519. The contracting office is part of the Department of Homeland Security under Base ALAMEDA, though no point of contact is listed, and bidders must submit proposals through the provided SAM.gov link. All activities must be completed in strict compliance with applicable federal regulations governing hazardous material handling and disposal.

Remediation Services

POSTED

DEADLINE

Fuel Removal at Sector Humboldt Bay Fuel Farm

Solicitation # 70Z03126QALAM0002

The contract addresses the removal and proper disposal of contaminated fuel from two 10,000-gallon Jet A fuel tanks at the Sector Humboldt Bay Fuel Farm in McKinleyville, California, requiring the contractor to supply all personnel, equipment, transportation, tools, materials, and supervision necessary to complete the task in full compliance with OSHA and EPA regulations. The scope includes the safe evacuation of fuel, handling of waste materials, and environmentally sound disposal practices to ensure regulatory adherence and safety throughout the operation. This solicitation, numbered 70Z03126QALAM0002, is a Small Business Set Aside under NAICS code 562910 and was posted on July 28, 2026, with a response deadline of August 21, 2026. The contracting office is located in Alameda, California, under the Department of Homeland Security, and the primary point of contact is David Gibson, with Shawn Jenkins as the secondary contact. The work must be performed at the specified location in McKinleyville, and interested parties must submit proposals through the designated SAM.gov portal before the stated deadline.

Remediation Services

POSTED

DEADLINE

Coast Guard Southwest District Electronic Security Systems (ESS) Modernization

Solicitation # 70Z03126QALAM2020

The U.S. Coast Guard is seeking to award up to three Blanket Purchase Agreements (BPAs) under a total small business set-aside to provide complete, turn-key modernization of Video Surveillance Systems and Physical Access Control Systems across the Coast Guard District Southwest Area of Operations, which includes California, Arizona, Nevada, and Utah. This solicitation, numbered 70Z03126QALAM2020, is issued as a combined synopsis and request for quote under FAR Subpart 12.6 and is strictly for commercial services classified under NAICS code 561621 with a size standard of $25 million. The requirement is unfunded at the BPA level, with pricing negotiated individually at the order level, though a specific project for an Electronic Security System security plan at Sector Humboldt Bay, McKinleyville, CA, requires detailed pricing breakdowns for labor, materials, and equipment with a 30-day performance period. Offerors must be registered in SAM.gov with completed FAR 52.212-3 representations, and submissions must include current, accurate certification statements, a point of contact authorized to bind the company, and acknowledgment of all amendments. The closing date for offers is August 7, 2026, and offers must remain valid for at least 30 days. Evaluation will be based on a best-value tradeoff where non-price factors—technical approach and past performance—are more important than price. The technical evaluation will assess the reasonableness of the proposed management approach for overseeing projects across the large geographic area and the qualifications of key personnel through submitted resumes. Past performance must include at least three recent, relevant contracts within the last five years, each with contact details. Pricing will be analyzed for completeness and reasonableness using FAR 15.404-1 techniques, but will not be scored. Offerors must also comply with multiple security and regulatory requirements including NIST SP 800-53 Rev. 5, NIST SP 800-116 Rev. 1, and the Revised 508 Standards for accessibility, and must implement Multi-Factor Authentication, provide a Software Bill of Materials prior to installation, and adhere to cybersecurity and supply chain risk management protocols. All deliverables must be formally accepted by the Contracting Officer’s Representative, with full system acceptance contingent on visual verification, remediation of all Critical and High vulnerability findings, and completion of operator training. A mandatory

Security Systems Services (except Locksmiths)

POSTED

DEADLINE