Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Supply of Chart Recording Units (Part No. 875D559)

Active

International

Response Deadline09/14/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails the supply of seven chart recording units with part number 875D559, to be delivered to two Canadian Forces bases: five units to CFB Halifax and two units to CFB Esquimalt. Each unit must be individually serialized and marked with a Unique Item Identifier in accordance with Canadian Forces standards, and all packaging must comply with the required military specifications to ensure proper handling, storage, and traceability throughout the supply chain. The procurement is classified as a subcontract under NAICS code 334514, and the contracting authority is the Department of National Defence on behalf of the Government of Canada. The tender was posted on August 4, 2026, with a response deadline of September 14, 2026, at 7:00 PM, and the place of performance spans British Columbia and Nova Scotia, reflecting the locations of the recipient bases.

General Info

Seven serialized chart units delivered to CFB Halifax and CFB Esquimalt per Canadian Forces standards.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

334514 - Totalizing Fluid Meter and Counting Device ManufacturingView NAICS

Place of Performance

British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineSep 14

Submission deadline

Response Deadline

09/14/2026, 07:00:00 PM UTCin about 1 month

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of seven chart recording units (part number 875D559), with five units to CFB Halifax and two to CFB Esquimalt. Units must be serialized, UID-marked, and packaged per Canadian Forces standards.

Similar Contracts

Same NAICS industry code

49--MAINTENANCE KIT,VEHICU

Solicitation # SPE7L326Q1194

DLA Land And Maritime

POSTED

about 7 hours ago

DEADLINE

METER,FLOW RATE IND

Solicitation # N0010426QYAF0

This contract pertains to the repair of the METER,FLOW RATE IND under a fixed-price arrangement with strict adherence to military specifications and quality standards. The work must comply with MIL-STD-1330 for oxygen/nitrogen cleaning, MIL-STD-130 Rev N for marking, and all repair processes must follow contractor-approved procedures, drawings, and technical directives. The item must be free from mercury contamination, with any intentional use of mercury requiring prior written approval and the installation of warning plates. Performance is governed by a one-year warranty from the date of delivery, with defects discoverable within 45 days of discovery subject to correction. The contract mandates the use of Workflow Pro and requires full compliance with Buy American and Small Business Set-Aside provisions, including a total small business set-aside and restrictions on pass-through charges. All inspections and testing must align with original manufacturer specifications, with contractor records retained for 365 days after final delivery. Packaging must conform to MIL-STD-2073, and only authorized distributors of the original manufacturer may submit offers, requiring proof of authorization. The contract is issued under Navy Procurement Command NAVSUP-WSS in Mechanicsburg, Pennsylvania, with Jessica Harpel listed as the point of contact for workflow and contractual matters. Payment will be processed via Wide Area Workflow, and all contractual documents are deemed issued upon electronic transmission. The solicitation requires compliance with security prohibitions, national defense priority ratings, and specific distribution controls on technical documents, including NOFORN and Official Use Only classifications. Any changes to design, material, or part number must be formally approved by the Contracting Officer using designated code classifications. The contract includes an option to increase quantity up to 365 units and prohibits subcontracting without full alignment to all obligations. The item is intended for use in submarine and surface ship systems, necessitating stringent environmental controls and contamination prevention protocols. All parties must adhere to the Defense Federal Acquisition Regulation Supplement and related deviation clauses issued through February and March 2026.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Solicitation # SPE7M226T6120

The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 113 units of an ohmmeter identified by NSN 6625015557261, with delivery required to W1A8 DLA DISTRIBUTION within 70 days of award. This procurement is issued as a Request for Quote under solicitation number SPE7M26T6120, with responses due by August 17, 2026. The item must be sourced exclusively from approved suppliers: FLUKE model 1507 with manufacturer code 89536 or AD751 with part number 2427890. No technical specifications, plans, or drawings are provided, and only electronic submissions are accepted. This is a Small Business Set Aside under NAICS code 334514, meaning only small businesses are eligible to compete. All responsible sources may submit quotes if received before the deadline, and no hard copies of the solicitation are available. The full solicitation must be accessed online via the SAM.gov link provided, and all inquiries must be directed via email to the designated point of contact.

DLA Land And Maritime

POSTED

DEADLINE

Solicitation # SPE7M126T262F

The U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for 15 voltmeters with NSN 6625012862888 under solicitation number SPE7M126T262F, with a requirement to deliver to DLA Dist San Joaquin by 343 days after award. The only approved source for this item is 50423 3440A-M113, and no technical specifications, plans, or drawings are provided. This is a combined solicitation set aside exclusively for SBA-certified Women-Owned Small Businesses under the WOSB program, with NAICS code 334514. All responsible sources qualifying as WOSBs may submit electronic quotes, which must be received by the deadline of August 17, 2026. Hard copies are not available, and submissions must be made electronically through the SAM.gov portal linked in the solicitation. The point of contact for questions is listed as DibbsBSM@dla.mil with further details available via the DIBBS website using the solicitation number. The contracting office is located in Columbus, Ohio, and performance location details are not specified.

DLA Land And Maritime

POSTED

DEADLINE

66--TEST SET,INTERFACE

Solicitation # SPE7M126T256X

The contract seeks the procurement of 63 units of the TEST SET, INTERFACE with NSN 6625014745998, to be delivered in two lines—25 units and 38 units—both to DLA DISTRIBUTION ALBANY within 168 days of award. Only approved sources are eligible to quote: 1PWR4 3535230 and 75Q65 3535230. The solicitation is issued as an RFQ under number SPE7M126T256X, posted on August 6, 2026, with responses due by August 17, 2026. No hard copies are available; all quotes must be submitted electronically through the designated SAM. gov portal. Specifications, plans, or drawings are not provided, and any responsible source may submit a quote if received by the deadline. The contracting office is the DLA Land and Maritime under the Department of Defense, located in Columbus, Ohio, with inquiries directed to the buyer via the email provided in the solicitation document. The NAICS code is 334514, indicating the procurement relates to navigational, measuring, electromedical, and control instruments manufacturing.

DLA Land And Maritime

POSTED

DEADLINE

RFP Pan and Tilt systems and ancillary equipment

Solicitation # WS5795563495

The Government of Canada through Public Works and Government Services is seeking proposals for the supply of three Pan & Tilt systems along with associated ancillary equipment to support RF measurements conducted on mobile lab masts. These systems will be used to accurately point antennas and sensor structures in the National Capital Region, ensuring precise data collection for technical and scientific applications. The equipment must be capable of reliable operation in field conditions and delivered to Ottawa, Ontario, to meet operational requirements. Proposals must be submitted by August 18, 2026, in response to solicitation number WS5795563495, which was posted on July 31, 2026. The procurement falls under NAICS code 334514, classifying it within the communication equipment manufacturing sector. All submissions should be directed to Alexandra Nadeau, the designated Contracting Authority, via email at alexandra.nadeau@tpsgc-pwgsc.gc.ca. This opportunity is open to all eligible offerors with no specific set-aside restrictions, and detailed information can be accessed through the Canada Buys portal.

Department of Public Works and Government Services

POSTED

DEADLINE

SWITCH, LIQUID LEVEL

Solicitation # SPE4A5-26-T-332P

This contract pertains to the procurement of a liquid level switch with part number 9144-G504 and NSN 6680-01-692-1616, requiring the delivery of one unit within 20 days to the USS MANCHESTER LCS 14 at FPO AP 96691. The item must be delivered FOB destination with no tolerance for quantity variation, and inspection and acceptance occur at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with specific preservation methods including dry climate control and no use of mercury or mercury compounds in any phase of packaging or preservation. Palletization follows DLA packaging requirement RP001, and the unit is to be shipped using the fastest traceable means, explicitly excluding parcel post. All marking, containment, and documentation adhere to designated military standards and include the special marking code indicating no additional requirements. The contract is issued under solicitation SPE4A5-26-T-332P by the Department of Defense, with delivery required no later than June 2, 2026, and the supplier must be registered in DLA’s vendor system. The point of contact for the order is Hien-Van Trinh, and the shipment is tied to the RDD 777 designation and project code ZJ7 TP 2.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

NRP, EMI FILTER A001

Solicitation # SPE7M1-26-T-250C

The contract pertains to the procurement of one unit of an EMI Filter designated as NRP, EMI FILTER A001 with NSN 6625-01-620-5168, issued under solicitation SPE7M1-26-T-250C by the Department of Defense through the Maritime Supply Chain. The item must be delivered within ten days to Camp Arifjan in Kuwait, with delivery terms FOB origin and no tolerance for variance in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking instructions with no special marking required. The supply may contain batteries and is subject to DLA packaging requirements and the removal of government identification from non-accepted supplies. Cybersecurity compliance is mandated at CMMC Level 2 via self-assessment, and the contract applies covered defense information protocols. Transportation and shipment logistics are governed by DLAD procedural notes, and the item must be delivered no later than August 3, 2026. The supplier, AZACHOROK CONTRACT SERVICES, LLC, is obligated to adhere to all technical and quality requirements referenced from the DLA Master List, and the unit of issue is specified as each (EA) per DoD standards.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

TRANSMITTER, LIQUID QUA

Solicitation # SPE4A5-26-T-331Y

Offerors must comply with strict prohibitions on providing covered telecommunications equipment or services as mandated by FAR 52.204-24 and DFARS 252.204-7016, and are required to confirm adherence to domestic material restrictions under the Berry Amendment and Buy American Act, with the Berry threshold reduced to $150,000. Non-domestic sourcing requires full disclosure to the point of contact, and all offers must reflect accurate dealer or distributor certifications. Quantity ranges are strongly encouraged for quoting due to fluctuating demand on open purchase requests, enabling buyers to consolidate or adjust quantities without administrative overhead, though this exception does not extend to Auto IDC. Offers submitted after the closing date must include a “No Bid” on DIBBS with an anticipated quote date or reason for non-submission to avoid assumption of non-procurability. Small business joint ventures must submit required representations for designated categories under FAR provisions, and all contractors must register through the upcoming AMPS system to maintain access to the Vendor Shipment Module, with VSM WebServices users needing schema updates by the specified deadline. Additive manufacturing is currently prohibited unless prior approval is granted by the contracting officer, and any proposal involving AM-produced items will be deemed ineligible for award. The solicitation covers 3 units of a liquid quench transmitter under NSN 6680-01-144-0840, with a 170-day delivery window, and is issued by the Department of Defense through the ASC Supplier Oper OEM Division. APEX Accelerators offer free support to businesses seeking to engage in government contracting.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

METER, IMPELLER TYPE

Solicitation # SPE4A6-26-T-12WW

The contract specifies the procurement of one impeller-type meter, part number 9078-01 from Howell Laboratories Inc, under NSN 6680-01-652-0060, with delivery required within 20 days FOB destination. The item is designated as a critical application and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Sampling follows MIL-STD-1916 or a comparable zero-based plan, with unspecified attributes treated as major and acceptance requiring zero non-conformances unless otherwise stated. Mercury or mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, except for functional uses in portable fluorescent lamps and instruments, which must include a secondary containment boundary per NAVSEA 5100-003D. The item is not hazardous per HMIC review and has no shelf life requirement. Unit of issue is each, with no quantity variance permitted. Delivery is to the USS FRANK E PETERSEN JR DDG 121 at FPO AP 96691 via vessel shipment, with transportation instructions governed by DLAD PROC NOTES C19 and C20. Supplier must adhere to DLA packaging and marking directives, and the contract prohibits government identification removal from non-accepted supplies. The solicitation was issued on August 5, 2026, with a response deadline of August 13, 2026, under contract number SPE4A6-26-T-12WW.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electromagnetic Flowmeter Supply – 12" Industrial GradeThe contract entails the supply of a 12-inch electromagnetic flowmeter equipped with a matching flange, specifically designed for precise water flow measurement in industrial applications. The device must comply with recognized industrial standards to ensure accuracy, durability, and reliability under demanding operational conditions. This subcontract is issued by the National Water Commission under the Government of Jamaica and is categorized under NAICS code 334514, which corresponds to the manufacturing of measuring and controlling devices. The solicitation was posted on August 5, 2026, and the place of performance is not specified beyond the jurisdiction of Jamaica. Interested vendors are directed to the official e-procurement portal for further details and submission guidelines.

National Water Commission

POSTED

DEADLINE

Re-Tender. CP1386/25. Supply of 12" Electromagnetic Flowmeter with Matching Flange

Solicitation # GOJEP-7799230

National Water Commission

POSTED

DEADLINE

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

Diving,Reel and Light,Signal

Solicitation # W8482-275400/A

The Department of National Defence is seeking bids for the supply of diving reels and signal lights to be delivered to Canadian Forces Base Halifax in Nova Scotia and Canadian Forces Base Esquimalt in British Columbia. Two line items each for diving reels and signal lights are specified: 100 diving reels with part number DITD-REEL-001 and 400 signal lights with part number 450STROBE-MT, with equal quantities allocated to each base. Both items are assigned the same GSIN code N7810, and the manufacturers are JULIAN JAMES RICHARD TAYLOR for the diving reels and PACIFIC SCUBA INDUSTRIES for the signal lights. Bidders wishing to propose equivalent or substitute products must provide the brand name, model, part number, and NCAGE code of the alternate item. All bids must be submitted on a Delivery Duty Paid basis, meaning the supplier is responsible for all costs and risks until delivery at the specified locations. The solicitation, numbered W8482-275400/A, was posted on July 24, 2026, with a response deadline of August 10, 2026, and documents may be submitted in either English or French. The contracting authority is Funto Oyebolu, and the Crown reserves the right to engage in further negotiations with suppliers following the bidding process.

POSTED

about 14 hours ago

DEADLINE

Office furniture sub-category 2 - Desk - Base Only

Solicitation # W6766-26-CS089

This solicitation under Supply Arrangement E60PQ-140003/D seeks the supply of electronic height-adjustable desk bases categorized as Product Sub-Category 2, for delivery to 60 Moodie Drive in Ottawa, Ontario, within the National Capital Region. Only suppliers who are already pre-qualified under this specific supply arrangement are eligible to bid directly; non-SA holders may submit proposals but must simultaneously apply for and secure the applicable supply arrangement prior to award, and the government is under no obligation to delay award pending their qualification. The desk bases must be electronically adjustable with a height range of 28.3 inches to 46.5 inches and compatible with tabletops measuring between 39.4 and 63 inches in length and 23.6 to 27.6 inches in depth, with functional equivalence to the specified product allowed if all technical criteria are met. Delivery is mandatory to the designated location, and installation is handled exclusively by Public Services and Procurement Canada, with no responsibility placed on the supplier. The requirement carries no security clearance obligations, and no specific packaging, marking, or invoicing instructions are detailed. The solicitation closes on August 10, 2026, and responses must be submitted electronically through the Government Electronic Tendering Service. Contract award is not guaranteed to follow lowest price technically acceptable principles, and no formal evaluation factors, weights, or contract value estimates are disclosed. The contracting authority is Gabriella Sabou, and general inquiries regarding supplier qualification may be directed to the designated procurement email. No contract clauses, representations, certifications, or accounting data are included within the provided documentation.

Wood Office Furniture Manufacturing

POSTED

about 14 hours ago

DEADLINE

Snap-On Versatest Digital Monitor

Solicitation # W8486-270946/A

The Department of National Defence, through the Government of Canada, is seeking to procure Snap-On Versatest Digital Monitors under solicitation number W8486-270946A, with a response deadline of August 8, 2026. Each unit must be accompanied by a Certificate of Calibration dated no more than 90 days prior to delivery, which is scheduled for January 15, 2027. The solicitation was posted on Buyandsell on July 23, 2026, and remains open for 15 calendar days to allow for submissions. All offers must be directed to Viktoria Melnichuk, the Contracting Authority, via email at viktoria.melnichuk@forces.gc.ca or by phone at 613-302-1534. The place of performance is in Canada, and no specific set-aside or NAICS code is indicated for this procurement.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 14 hours ago

DEADLINE

Solicitation # W8482-275277/A

The Department of National Defence is seeking bids for two identical gaskets, part number M2000471, manufactured by ONDA SPA, with each line item requiring a quantity of 75 units to be delivered to CFB Halifax, Nova Scotia and CFB Esquimalt, British Columbia respectively. These items fall under GSIN 5330 and NCAGE A5900, and bidders may propose equivalent or substitute products provided they clearly specify the brand, model, part number, and NCAGE of their alternative offering. The procurement is subject to a preference for Canadian goods and services, and all bids must be submitted on a Delivery Duty Paid basis, meaning the supplier is responsible for all costs and risks until delivery at the specified locations. The solicitation, identified by number W8482-275277/A, was posted on July 24, 2026, with a response deadline of August 11, 2026. Documents may be submitted in either official language of Canada, and the Crown reserves the right to negotiate with any supplier. Primary contact for inquiries is Keith Provick, Contracting Authority, reachable via email at keith.provick@forces.gc.ca.

Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 14 hours ago

DEADLINE

Refuellers and Aerial Devices Vehicles Spare Parts

Solicitation # W8486-270862/A

The Department of National Defence is seeking bids for spare parts required for Refuellers and Aerial Devices Vehicles, with delivery mandated to 25 Canadian Forces Supply Depot in Montreal, Quebec and 7 Canadian Forces Supply Depot in Edmonton, Alberta on or before November 30, 2026. The procurement covers 42 distinct line items including screws, gaskets, seals, couplings, filters, lighting components, terminal boxes, ground rods, regulators, switches, and hose reels, each identified by National Stock Number (NSN), General Supply Identification Number (GSIN), part number, and CAGE code. All items must be new, conform to the latest approved drawings and specifications as of the offer closing date, and be marked with the manufacturer’s name and part number either stamped, etched, or affixed via high-standard adhesive label. Packaging must adhere to Canadian Forces specifications—items listed must be single-unit packaged under D-LM-008-036/SF-000, while specific items like the nozzle require compliance with D-LM-008-001/SF-001 and D-LM-008-002/SF-001 marking standards. Palletization is required for shipments exceeding 0.566 cubic meters or 15.88 kilograms, using standard 1.22 m x 1.02 m wood pallets with four-way forklift access, a maximum height of 1.19 meters, and no more than 2.54 cm of overhang, with items grouped by stock number and mixed loads clearly labeled. All wood packaging must meet ISPM 15 standards. Bids must be submitted electronically via email to DLP53BidsReceiving.DAAT53receptiondessoumissions@forces.gc.ca by 2:00 PM EDT on July 11, 2026, and structured into four sections: technical offer, financial offer, completed submission and declaration forms, and additional information. Offerors must provide the exact part number and CAGE code for each item, and may propose equivalent or substitute products with full identification. The award will be based on the lowest evaluated price across all NSNs, with strict pass/fail criteria requiring full compliance with mandatory technical specifications—failure to supply correct part numbers will result in non-compliance. All items are to be delivered under DDP Incoterms 20

Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

about 14 hours ago

DEADLINE

NFS(Pacific) Seating

Solicitation # W0103-19103199

The Department of National Defence is seeking the purchase, delivery, and installation of office seating—specifically rotary chairs and stools—at CFB Esquimalt in Victoria, British Columbia, under Supply Arrangement E60PQ-120001/H. The requirement is solicited through the General Stream of pre-qualified suppliers, with non-SA holders eligible to bid only if they simultaneously apply for and receive a supply arrangement from the Supply Arrangement Authority; however, contract awards will not be delayed pending such evaluations. All work must be completed and accepted by October 31, 2026, with the contract term extending through October 31, 2027. Deliveries are required under DDP Incoterms® 2020 to the Naden Building NAD092, meaning the contractor assumes all costs and risks until goods are installed at the site. The award will follow a Lowest Price Technically Acceptable (LPTA) methodology, where only offers meeting all mandatory technical, environmental, and compliance requirements are eligible, and the lowest-priced compliant bid receives the award. Offerors must certify compliance with Canadian Content, environmentally preferable packaging standards (requiring reusable, returnable, or recyclable materials), and anti-forced labor provisions, and must submit completed Offer Submission and Declaration Forms. There are no security requirements, no key personnel specifications, and no organizational conflict of interest clauses beyond general Code of Conduct adherence, but contractors must notify Canada within ten days of any change in their place of business to maintain Canadian Supplier status. Invoices must include the contract number, client reference, procurement business number, and certification of delivery and accuracy, and must be submitted electronically. All records must be retained for up to seven years after final payment for audit purposes. Proposals must be emailed to Ila.Jordan@forces.gc.ca by August 7, 2026, using the Government Electronic Tendering Service for amendments and updates, and can be submitted in English or French.

Institutional Furniture Manufacturing

POSTED

about 14 hours ago

DEADLINE

CFSME Out-Service Training: Plumbing and Heating Technician (PH Tech)

Solicitation # W2037-27-0421/A

The Department of National Defence is seeking qualified suppliers to deliver out-service training for the DP1 Plumbing and Heating Technician trade at the Canadian Forces School of Military Engineering, with the course scheduled to begin on 6 October 2026. The training must be conducted by an accredited academic institution at a recognized post-secondary vocational institute, and all instructional content and delivery standards must be provided and supervised by such an institution. This procurement is governed by the Policy on Reciprocal Procurement, limiting eligibility to Canadian suppliers and suppliers from designated trading partners, as defined in the solicitation’s annex. The requirement is issued under Solicitation Number W2037-27-0421/A, with responses due by 21 August 2026. The contracting authority is Maura Archibald, who can be reached at Maura.Archibald@forces.gc.ca, and the Crown reserves the right to negotiate terms with any submitted offers. The training will be delivered across one of the three Atlantic Canadian provinces: New Brunswick, Nova Scotia, or Prince Edward Island.

Apprenticeship Training

POSTED

about 14 hours ago

DEADLINE

IT Professional Services

Solicitation # W8485-27-TBIPS-KB14501

This procurement is open exclusively to pre-qualified suppliers under the Task Based Informatics Professional Services (TBIPS) agreement, specifically those holding Tier 1 status under EN578-170432, and requires the provision of three senior-level professional services: one Network Support Specialist (Level 3) for Stream 4, one Telecommunication System Specialist (Level 3) for Stream 7, and one Applications/Software Architect (Level 3) for Stream 1. The work is to be performed primarily at CFB Trenton and Astra in Ontario and demands a Secret security clearance for all personnel, with no document safeguarding requirements beyond the clearance. The estimated effort totals 600 person-days annually—240 days each for the Network and Telecommunications specialists and 120 days for the Software Architect—over a four-year contract period running from August 2026 to July 2030. Only suppliers listed in the pre-qualified roster, including major firms such as IBM Canada, Calian Ltd., and TEKSYSTEMS CANADA CORP., are eligible to respond, and the Request for Proposal documents will be distributed directly by the Department of National Defence to these invited entities; they are not accessible via the government’s public tendering portal. Proposals must be submitted by August 26, 2026, and may be submitted in either English or French.

POSTED

about 14 hours ago

DEADLINE

Tracked Excavator

Solicitation # W8476-277193/A

The Department of National Defence is seeking to procure three tracked excavators for delivery to Canadian Forces Base Trenton, Borden, and Esquimalt, with an optional additional three units also available, all to be delivered within Canada within 180 days of contract award. While Trenton is listed as a delivery point, it serves only as a transitory location, as the final destination for one unit is CFS Alert in Nunavut, with the Crown assuming full responsibility for transporting the equipment from Trenton to Alert. This procurement is governed by the Nunavut Land Claims Agreement, underscoring the importance of compliance with Indigenous land rights and related obligations. Offers must be submitted electronically by the deadline of September 16, 2026, to the specified government email address, and may be submitted in either English or French. The Crown reserves the right to negotiate terms with suppliers, and all submissions are to be directed through the designated contracting authority, Dong Le, whose contact details are provided in the solicitation.

POSTED

about 14 hours ago

DEADLINE

in about 1 month

Personal Locator Beacon

Solicitation # W3996-26008/A

The Department of National Defence is seeking to procure 192 units of the Buoyant Personal Locator Beacon, ResQLink 400PLB, identified by GSIN N4220 and NSN 2921:18560, for delivery to Tactical Helicopter Squadrons across Canada according to specified dates and addresses outlined in the annex. Equivalent products that match the form, fit, function, and quality standards of the specified item are acceptable for consideration, allowing suppliers to propose alternatives as long as they meet the required performance criteria. The solicitation, identified by number W3996-26008/A, was posted on August 7, 2026, with bids due by September 2, 2026, and the Crown reserves the right to negotiate terms with any qualified suppliers. All documentation may be submitted in either English or French, reflecting Canada’s official languages. The contract is managed by the Government of Canada under the Department of National Defence, with Emma Ringor serving as the primary point of contact for inquiries, reachable via email or phone. Performance of the contract will occur across various locations within Canada, with no single fixed delivery address specified beyond the squadron locations listed in the annex.

POSTED

about 14 hours ago

DEADLINE

Evaporative Cooler requirement

Solicitation # W3915-27-0012

The Department of National Defence is seeking proposals for the supply of five portable evaporative coolers, each required to effectively cool an area of 6500 square feet while weighing no more than 225 pounds. The solicitation, identified by number W3915-27-0012, was posted on July 29, 2026, with responses due by August 18, 2026. Proposals may be submitted in either English or French, and there is no security clearance requirement for suppliers. The equipment is intended for use in New Brunswick and Nova Scotia, and the Crown reserves the right to engage in negotiations with interested suppliers. All correspondence and submissions should be directed to Timothy Herrington, Contracting Authority, at procurementCADTC@forces.gc.ca.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

Solicitation # W0127-26-P016

The Department of National Defence is soliciting bids for the procurement of 200 institutional-grade mattresses—100 twin size and 100 queen size—to support lodging at CFB Edmonton, with delivery required no later than 1 September 2026. Only Canadian suppliers, as defined in the solicitation’s annex, are eligible to bid; offers from non-trading partner nations will be rejected. Each mattress must be new, unused, and meet strict technical specifications including a minimum 8-inch thickness, medium to medium-firm firmness, reinforced edges, a 250 lb weight capacity, stain-resistant and removable cover, compliance with Canadian fire safety standards, and a minimum five-year manufacturer warranty. All bids must include documentation demonstrating compliance with these mandatory criteria; failure to meet any requirement renders the offer non-responsive. The procurement follows a best-value trade-off approach, considering both technical acceptability and price, though no specific weighting or rating scale is disclosed. Packaging must adhere to ISO 21067-1:2016 standards, with contractors responsible for ensuring secure, protective containment during transport, though no specific materials, dimensions, or labeling requirements are detailed. Preservation methods, marking, and barcoding are not specified. Delivery is to be made to CFB Edmonton, with acceptance performed upon arrival. Payment will be processed by the Receiver General for Canada via electronic methods such as Direct Deposit or Wire Transfer, and invoicing may be submitted electronically via EDI, though no specific platforms like WAWF or IPP are required. Proposals must be submitted through the Government Electronic Tendering Service by 17:00 Eastern Time on 17 August 2026, using the required annexes for Offer Submission and Offeror Certification. Bidders must certify compliance with the Federal Contractors Program for Employment Equity and disclose any disqualifying integrity issues via the Integrity Declaration Form. No security clearances, key personnel, contract options, or OCI provisions apply. The contract is inferred to be fixed-price, with pricing submitted by offerors in the absence of any stated budget or estimated value.

Mattress Manufacturing

POSTED

about 14 hours ago

DEADLINE