Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Fiber Optic Receiver Module (DOCSIS 3.1 Compatible)

Active

State & Local

Response Deadline07/23/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the supply of an OTPN-412C Fiber RX module designed for DOCSIS 3.1-8 compatibility, featuring SC/APC connectors, operating across the 40-1220 MHz frequency range, and supporting dual wavelengths of 1310 nm and 1550 nm with a minimum output level of +28 dBmV. The module is intended for fiber-optic signal reception in cable television and broadband networks and includes the OTPS-12A-F power supply to ensure proper operation. This subcontract is issued by Dallas Fort Worth International Airport under the NAICS code 334220, which pertains to the manufacturing of communication equipment. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, at 7:00 PM, indicating a tight turnaround for potential suppliers. The place of performance and point of contact details are not specified, but the procurement is hosted on Bonfire Hub under opportunity ID 243668.

General Info

Supply of OTPN-412C Fiber RX module with SC/APC connectors, 40-1220 MHz, dual wavelengths, +28 dBmV output, includes OTPS-12A-F power supply.

Agency

Texas → Dfw International AirportView Agency

NAICS

334220 - Radio and Television Broadcasting and Wireless Communications Equipment ManufacturingView NAICS

Place of Performance

TX, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 23

Submission deadline

Response Deadline

07/23/2026, 07:00:00 PM UTCin 2 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyTexas → Dfw International Airport

ContactsNo contacts available

OfficeN/A

Organization / Agency

Texas → Dfw International Airport

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of OTPN-412C Fiber RX module (SC/APC, 40-1220 MHz, DOCSIS 3.1-8, 1310/1550 nm, +28dBmV output) with included OTPS-12A-F power supply for fiber-optic signal reception.

Similar Contracts

Same NAICS industry code

Optical Splitter Module SupplyDfw International Airport is seeking suppliers to provide one thousand four optical splitter modules for the expansion of its fiber optic network. The solicitation is classified as a subcontract and is open for responses until July 23, 2026, with the opportunity posted on July 20, 2026. The NAICS code 334220 identifies this procurement within the telecommunications equipment manufacturing sector. All modules must meet technical specifications required for seamless integration into the airport’s existing infrastructure to support increased bandwidth and network reliability. Performance of the contract is expected to occur at DFW Airport in Texas, though specific delivery logistics and technical requirements are not detailed in the provided data. Bidders must ensure compliance with all contractual obligations, including timely delivery and adherence to industry standards for optical component performance.

Dfw International Airport

POSTED

about 22 hours ago

DEADLINE

Classroom Interactive Displays SupplyThe contract titled Classroom Interactive Displays Supply seeks the procurement and delivery of interactive display units, including smart boards and touch-enabled screens, to support classroom instruction. It is issued as a subcontract under NAICS code 334220, which pertains to the manufacturing of computer and peripheral equipment, indicating the emphasis on technologically advanced, education-focused hardware. The opportunity was posted on July 20, 2026, with a response deadline of August 10, 2026, giving potential vendors approximately three weeks to submit proposals. The awarding entity is MPTAP, representing the Mississippi Department of Finance and Administration, and the place of performance is within the state of Mississippi, though specific locations are not detailed. This initiative aims to modernize educational environments by providing schools with up-to-date interactive technology to enhance teaching and learning outcomes.

POSTED

about 23 hours ago

DEADLINE

Supplier of Covered Defense Telecommunications Equipment MonitoringThe contract requires suppliers to ensure compliance with DFARS 252.204-7018 by implementing rigorous screening procedures to identify and exclude prohibited telecommunications equipment, such as devices sourced from Huawei or ZTE, within embedded systems supplied to the Department of Defense. This obligation applies to all subcontractors involved in the supply chain for defense-related components, mandating end-to-end verification to prevent the introduction of any covered equipment that poses a national security risk. Suppliers must establish documented processes to trace component origins, maintain audit trails, and provide attestations of compliance as part of contract fulfillment. The scope is tied to NAICS code 334220, indicating focus on electronic component manufacturing, and the contract is categorized as a subcontract under the Defense Logistics Agency. Performance is expected to align with Department of Defense security standards across all locations, with no specific geographical restrictions indicated. The solicitation, issued on July 20, 2026, is linked to contract SPE4AX25D0003 and delivery order SPE4AX25F2656, and participation requires adherence to federal cybersecurity and supply chain integrity regulations without exception. Noncompliance may result in contract termination or penalties under applicable defense acquisition rules.

Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

Supply of 1x4 Optical SplitterThe contract entails the supply of an OTCP-1X4-00-SA 1x4 optical splitter designed for use in fiber optic networks operating at 1310 nm and 1550 nm wavelengths, enabling the distribution of optical signals across network paths. The component is critical for passive optical network infrastructure and must meet technical specifications to ensure signal integrity and performance in telecommunications applications. The solicitation is issued as a subcontract under NAICS code 334220, which classifies it within the optical communication equipment manufacturing sector, and is managed by the DFW International Airport through its Texas-based entity. The opportunity was posted on July 20, 2026, with a firm response deadline of July 23, 2026, at 7:00 PM, leaving a narrow five-day window for interested parties to submit proposals. The place of performance and point of contact details are unspecified in the available data. Interested suppliers must respond through the designated online portal at the provided UI link, and while no set-aside status is designated, the contract is structured as a subcontract, suggesting procurement is being managed under a broader prime contract or program. All technical and delivery requirements are expected to align with industry standards for optical splitters in telecom environments.

Dfw International Airport

POSTED

about 24 hours ago

DEADLINE

Supply of Fiber Optic TX Module (15dBm Output)The contract outlines the supply of a fiber optic TX module specifically designated as LP-OT-15-B-SA, capable of outputting 15dBm power across a frequency range of 48 to 1000 MHz and equipped with SC/APC connectors, intended for use in MATV fiber networks to convert electrical signals into optical signals. This subcontract is issued by DFW International Airport under the NAICS code 334220, which corresponds to the manufacturing of electronic components and related products, and is open for response until July 23, 2026 at 7:00 PM. The requirement is for the delivery of modules that meet precise technical specifications to ensure seamless integration into existing infrastructure supporting audio, video, and data transmission over fiber. There is no set-aside designation specified, and the place of performance and point of contact details are not provided in the available information.

Dfw International Airport

POSTED

about 24 hours ago

DEADLINE

Fiber Optic Contact Manufacturing and AssemblyThe contract requires the precision manufacturing and assembly of fiber optic contacts with part number MTPF1100C-PKG, adhering strictly to military optical performance standards. This includes high-accuracy alignment, advanced polishing techniques, and comprehensive testing to ensure compliance with stringent military specifications for signal integrity and durability. All work must be performed to meet or exceed the expected quality metrics for optical connectivity in demanding defense applications. This is a subcontract under the Department of Defense, managed by the Defense Logistics Agency, with the NAICS code 334220 indicating classification within the other electronic component manufacturing sector. The solicitation was posted on July 20, 2026, and performance is expected to occur without specified geographic limitations, allowing flexibility in production and assembly locations as long as quality and delivery requirements are met. The contract is not subject to any set-aside provisions and is available to qualified subcontractors capable of executing defense-grade optical component manufacturing.

Defense Logistics Agency

POSTED

about 24 hours ago

DEADLINE

Covered Defense Telecommunications Equipment Compliance & ReportingThis contract imposes strict compliance and disclosure requirements related to the use of covered defense telecommunications equipment or services, targeting subcontractors operating within the Department of Defense supply chain. It mandates that all parties verify and report whether any equipment or services involved in performance contain components sourced from entities identified as security risks under federal regulations, ensuring adherence to national security standards. The obligation extends to full transparency in supply chain disclosures, requiring timely submissions and accurate documentation to confirm the absence of prohibited technologies. The contract is issued under NAICS code 334220, which pertains to telecommunications equipment manufacturing, and is scoped to a place of performance in New Cumberland, Pennsylvania, with a response deadline of July 28, 2026. It is classified as a subcontract under the ASC Commodities Division, indicating it applies to firms supporting broader Department of Defense procurement activities. Failure to comply with disclosure obligations may result in contractual penalties, debarment, or termination, underscoring the non-negotiable nature of these requirements for maintaining eligibility to participate in defense-related work.

ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

Receiver-Transmitter Subassembly ManufacturingThe contract requires the manufacture, testing, and delivery of two units of a Receiver-Transmitter Subassembly identified by NSN 5820-01-651-2898, with full compliance to Department of Defense technical and quality standards set by the Defense Logistics Agency. The work is to be performed at Tracy, California, with the delivery location specified by the ZIP code 95304-5000, and the contractor must adhere to all specifications outlined in the solicitation under NAICS code 334220. The opportunity is structured as a subcontract and was posted on July 20, 2026, with a response deadline of July 28, 2026, indicating a narrow window for potential vendors to submit proposals. The contracting activity falls under the ASC SUPPLIER OPER AE AND AF DIV of the Department of Defense, and all deliverables must meet stringent military-grade requirements for functionality, reliability, and documentation.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 24 hours ago

DEADLINE

Antenna Supply (Commercial Off-the-Shelf)The contract requires the supply of seven commercial off-the-shelf antennas, identified by NSN 5985013704757 and part numbers AV412 or AV412-1, adhering to military specifications and packaging standards. These antennas are to be delivered as-is, with no integration, installation, or additional services required of the supplier. The procurement is categorized as a subcontract under NAICS code 334220, indicating classification within the communications equipment manufacturing sector. The offering is issued by the Department of Defense through its Maritime Supply Chain organization, with performance to be delivered to Tracy, California, at zip code 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, with no set-aside provisions or preferred contractor categories designated. All deliveries must comply with the military’s logistical and packaging requirements to ensure readiness for deployment without further modification.

MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

Supplier of Export-Controlled or Covered Defense ItemsThis contract requires suppliers to provide components or services that are subject to export control regulations or covered defense telecommunications requirements, mandating full and accurate disclosure of all relevant details regarding the nature, origin, and technical specifications of the supplied items. The nature of the procurement necessitates strict compliance with federal security and export regulations, with suppliers expected to ensure that their offerings do not violate any restrictions related to controlled technologies or defense-related communications infrastructure. Failure to fully disclose information may result in contract termination or legal penalties. The contract is classified as a subcontract under NAICS code 334220, indicating a focus on communications equipment manufacturing, and is managed by the Fluid Handling Division of the Department of Defense. The place of performance is specified as Tracy, California, with a zip code of 95304-5000. Responses must be submitted by July 31, 2026, with the solicitation posted on July 20, 2026. Suppliers must be prepared to meet stringent compliance obligations tied to national security and defense telecommunications standards, and are expected to engage with the procurement process through the designated DIBBS portal.

FLUID HANDLING DIVISION

POSTED

about 24 hours ago

DEADLINE

Supplier for Covered Defense Telecommunications Equipment DisclosureThe contract requires suppliers to disclose and report any covered defense telecommunications equipment or services used in performance of the subcontract, including any foreign affiliations tied to the equipment or services, in accordance with DFARS Clause 252.204-7016. This obligation applies to all tiers of the supply chain and mandates full transparency regarding the origin, ownership, and potential foreign influence of telecommunications hardware and software incorporated into defense-related systems. The requirement is designed to safeguard national security by ensuring that equipment procured for defense purposes does not pose risks through foreign control or compromised supply chains. The solicitation is issued under NAICS code 334220 for communications equipment manufacturing and is categorized as a subcontract under the Department of Defense, specifically managed by Land Supplier Opns Vehicle Spt. Performance is designated for Cherry Point, North Carolina, with a strict response deadline of July 23, 2026, and a posting date of July 20, 2026. The nature of the contract necessitates immediate and accurate compliance from suppliers, with non-disclosure or misrepresentation potentially leading to contract termination, penalties, or debarment. All entities responding must have systems in place to identify, document, and report covered telecommunications items and their foreign connections to meet federal compliance standards.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 24 hours ago

DEADLINE

Supplier of Covered Defense Telecommunications Equipment or ServicesThe contract requires the provision of telecommunications equipment or services that fully comply with Department of Defense supply chain security requirements, specifically mandating adherence to Section 889 of the FY2019 National Defense Authorization Act. This means all supplied items must be free from prohibited telecommunications equipment or services identified as posing national security risks, ensuring that no covered components from designated foreign adversaries are included in the supply chain. Compliance is not optional and must be verified through certifications and documentation attesting to the integrity and origin of all equipment and services provided. This is a subcontract under the Department of Defense, with the contracting activity managed by the Medical Supply Chain Pharm FSA. The place of performance is tied to Nellis Air Force Base in Nevada, with a response deadline of July 27, 2026, and the solicitation was posted on July 20, 2026. The NAICS code 334220 indicates the focus is on telecommunications equipment manufacturing, underscoring the technical nature of the deliverables. All submissions must meet strict security standards and demonstrate proven compliance pathways to be considered eligible, with the DoD maintaining rigorous oversight to safeguard its communications infrastructure from compromised sources.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

about 24 hours ago

DEADLINE

More opportunities from Texas → Dfw International Airport

Same awarding agency

Fiber Optic Enclosure SupplyThe contract is for the supply of Z-FOE Universal Free Hanging Fiber Optic Enclosures designed for outdoor and industrial environments to ensure reliable network termination and protection of fiber optic connections. These enclosures are critical for safeguarding fiber splices and termination points in challenging conditions, supporting the infrastructure needs of a major transportation facility. The solicitation is structured as a subcontract under NAICS code 335999, indicating it falls under miscellaneous electrical equipment and component manufacturing, and is issued by DFW International Airport under its Texas operations. The opportunity was posted on July 20, 2026, with a strict response deadline of July 23, 2026, leaving a narrow window for qualified vendors to submit proposals. The place of performance and point of contact details are not specified, suggesting that delivery logistics and coordination may be determined post-award. The contract does not include a set-aside designation, meaning all eligible suppliers may compete without restrictions based on business size or ownership type.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 22 hours ago

DEADLINE

Surge Protector Device SupplyThe contract solicits the supply of Z-SPD Universal Free Hanging Surge Protector Devices to provide electrical protection for connected equipment at DFW Airport. These devices are intended to safeguard sensitive infrastructure from voltage surges and electrical disturbances, ensuring uninterrupted operations across critical airport systems. The solicitation is structured as a subcontract and falls under the NAICS code 335313, which pertains to the manufacturing of wiring devices and related electrical components. All responses must be submitted by the deadline of July 23, 2026, and the opportunity was posted on July 20, 2026, indicating a narrow window for submissions. The contracting entity is DFW International Airport, located in Texas, with no specific city or address provided for the office or place of performance, suggesting the devices will be deployed across various locations within the airport’s operational footprint.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 22 hours ago

DEADLINE

Network Interface Card SupplyThe contract is for the supply of Z-NIC Universal Free Hanging Network Interface Cards to support IT infrastructure deployment at DFW International Airport. It is classified as a subcontract with a NAICS code of 334111, indicating it falls under the manufacturing of computer and peripheral equipment. The solicitation was posted on July 20, 2026, with a response deadline of July 23, 2026, indicating a short window for vendors to submit proposals. The contracting entity is DFW International Airport, located in Texas, and while specific physical locations for performance or point of contact are not provided, the equipment is intended for use at the airport’s facilities. The cards are designed for universal compatibility and free hanging installation, suggesting they are meant for flexible, scalable network integration within the airport’s existing or expanded IT systems. The opportunity is hosted on BonfireHub and is open to qualified subcontractors meeting the technical and logistical requirements of the deployment.

Electronic Computer Manufacturing

POSTED

about 22 hours ago

DEADLINE

3RU Rack Shelf SupplyDfw International Airport is seeking suppliers to provide 3RU rack shelves for integration into server and equipment racks across its facilities. The solicitation is classified as a subcontract with a NAICS code of 332323, indicating procurement within the computer and electronic product manufacturing sector. Responses must be submitted by July 23, 2026, at 7:00 PM, with the opportunity posted on July 20, 2026. The shelves are intended for use in mission-critical infrastructure at the airport, requiring precise compatibility and durability under operational conditions. While the specific location of performance is not detailed, the work is tied to airport facilities in Texas. Interested parties should access the opportunity through the provided Bonfire Hub link to submit proposals and review any additional technical or compliance requirements.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 22 hours ago

DEADLINE

Universal Shielded Balun SupplyThe contract involves the supply of Z-Balun Universal Free Hanging Shielded Baluns to support signal transmission infrastructure at DFW International Airport, specifically designated as a subcontract under NAICS code 334310, which corresponds to communications equipment manufacturing. The solicitation was posted on July 20, 2026, with a tight response deadline of July 23, 2026, indicating an urgent procurement timeline. The baluns are critical components for maintaining signal integrity in aviation communication and radar systems, requiring shielded, free-hanging designs to ensure electromagnetic compatibility and operational reliability in a high-interference environment. The effort is being managed by DFW International Airport in Texas, with no explicit set-aside provisions or point of contact provided, suggesting a competitive open bidding process among qualified vendors capable of delivering certified, mission-critical equipment to airport standards.

Audio and Video Equipment Manufacturing

POSTED

about 22 hours ago

DEADLINE

MATV Hardware for Ground Transportation FacilityThe Dallas-Fort Worth International Airport Board is seeking bids for MATV Hardware to be installed at the Ground Transportation Facility under solicitation number DFW19416, with all quotes required to be submitted exclusively through the BonfireHub portal at dfwairport.bonfirehub.com. No submissions via email or mail will be accepted, and the deadline for responses is 2:00 pm Central Time on July 23, 2026. All pricing must account for delivery F.O.B. to the airport’s specified address at 3122 East 30th Street, DFW Airport, Texas 75261, and the Airport Board, being tax exempt, expects all quoted prices to exclude sales tax. The solicitation was posted on July 20, 2026, and the primary point of contact for inquiries is Marcina Henry, reachable at mahenry@dfwairport.com. The hardware specifications are detailed in the attached Statement of Work, and bidders must ensure full compliance with all technical and delivery requirements outlined therein.

POSTED

about 22 hours ago

DEADLINE

Supply of 3RU Rack Shelf (15-inch Deep, Slotted)The contract involves the supply of a 3RU rack shelf measuring 15 inches deep with a slotted design, intended for mounting equipment within a standard 19-inch rack at DFW Airport. The item is specified for use in critical infrastructure applications requiring secure and organized equipment installation in a data or telecommunications environment. The solicitation is classified as a subcontract with no set-aside designation, and the applicable NAICS code is 332323, which corresponds to the manufacturing of industrial and commercial equipment and components. The opportunity was posted on July 20, 2026, with a firm response deadline of July 23, 2026, at 7:00 PM, indicating a short and urgent procurement timeline. Performance of the contract will occur at DFW Airport in Texas, though specific delivery or installation details are not outlined. The solicitation is managed through BonfireHub, with no designated point of contact provided, and all submissions must be made via the online portal linked in the posting.

Ornamental and Architectural Metal Work Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply of 8-Port Video Hub (1U Rack Mount)The contract pertains to the supply and delivery of an 8-port 1U video hub model ZBT0100322, specifically designed for MATV signal distribution with operation at 54-SG0MHz and integrated AGC diagnostics to ensure signal integrity and performance monitoring. The equipment is configured for rack-mount installation and must meet precise technical specifications to support reliable video signal routing across large-scale distribution networks. Solicited as a subcontract under NAICS code 334310, the opportunity is issued by DFW International Airport under the Texas organizational structure, with a narrow response window closing just three days after posting on July 23, 2026. The delivery must occur to the airport’s specified location, with all units expected to be fully compliant with operational and diagnostic requirements without deviation.

Audio and Video Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

Supply of Shielded Baluns for MATV SystemsThe contract is for the supply and delivery of Z-Balun Universal Free Hanging Shielded Baluns, Model ZBT0010461, equipped with RS232 and IR control functionality, intended for integration into MATV systems. These devices are critical for signal distribution and interference mitigation in multi-dwelling or distributed antenna environments, ensuring reliable television and data transmission. The baluns must meet specific shielding and performance standards to operate effectively within the operational demands of the airport’s broadcast infrastructure. This is a subcontract opportunity posted by DFW International Airport under NAICS code 334310, which pertains to communications equipment manufacturing. The solicitation was released on July 20, 2026, with a firm response deadline of July 23, 2026, indicating a tight turnaround for proposals. While the place of performance and point of contact details are not specified, the procurement is managed through the DFW Airport’s Texas-based operations and must be fulfilled in accordance with the technical and logistical requirements of the MATV system upgrade. Bidders must ensure compliance with technical specifications and delivery timelines to qualify.

Audio and Video Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE