Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Supply of Lutron QP3-1PL-100-240 Light Management Hub

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the supply of one factory-new Lutron QP3-1PL-100-240 Light Management Hub to serve as the central control unit for the US Embassy in Mexico’s networked lighting system, ensuring seamless integration with existing lighting controls. The device is required to be fully compatible with the currently installed infrastructure to enable reliable, centralized management of lighting operations across embassy facilities without the need for additional hardware modifications or system upgrades. This subcontract, classified under NAICS code 334511 for electronic instrument manufacturing, is issued by the US Department of State through its diplomatic mission in Mexico. The performance location is designated as Mexico, though no specific city or address is provided. The solicitation was posted on July 28, 2026, and the contract is intended to support the embassy’s operational efficiency and energy management goals through advanced lighting control technology.

General Info

Supply of one Lutron QP3-1PL-100-240 Light Management Hub for US Embassy in Mexico lighting system.

Agency

Department Of State → US Embassy MexicoView Agency

NAICS

334511 - Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument ManufacturingView NAICS

Place of Performance

Mexico, MX-CMX, MEX

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of State → US Embassy Mexico

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of State → US Embassy Mexico

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide one factory-new Lutron QP3-1PL-100-240 Light Management Hub for central control of the embassy’s networked lighting system, fully compatible with installed controls.

Similar Contracts

Same NAICS industry code

INDICATOR, CARBON DIThe contract pertains to the procurement of one unit of an Indicator, Carbon DI, identified by NSN 6665-01-724-8111 and part number ES-1531-CO-S, supplied by RKI INSTRUMENTS, INC. Delivery is required within five days of award, with FOB origin terms, and the item must be shipped via the fastest traceable means excluding parcel post to the Sierra Army Depot in Herlong, California. No quantity variance is permitted, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List technical and quality requirements, including RP001 for packaging, MIL-STD-129 for marking and labeling, and FED-STD-313 to determine hazardous status; if non-hazardous, commercial packaging per ASTM D3951 applies but is subordinate to DLA requirements. The item may contain batteries, necessitating compliance with RQ035. All packaging must adhere to specified unit of issue and quantity per unit pack, with palletization following DLA guidelines. The contract references SPE7M0-26-T-022H as the controlling solicitation, with a required delivery date of July 24, 2026, and a response deadline of August 10, 2026. The item is classified under NAICS 334511, and government use codes indicate specific logistics and distribution protocols. Contact for inquiries is Gerard Quinn, with email and phone provided for coordination.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 15 hours ago

DEADLINE

VALVE PORT, NEEDLE FREEVALVE PORT, NEEDLE FREE is a sterile, needleless connector designed for use in medical applications requiring neutral displacement and touch-free operation, supplied in peel pouches to maintain sterility. Each package contains 200 units, with the contract calling for three packages totaling 600 units. The item has a non-extendable shelf life of 60 months, and no more than nine months may have elapsed from the date of manufacture to the date of delivery to the government. Packaging must comply with DLA requirements, and all technical and quality specifications referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Bidders must clearly identify the source and part number being offered. The NSN is 6515-01-591-5707, with a delivery requirement of 20 days after order award, and performance is mandated at Fort Bliss, Texas. The solicitation, issued under SPE2DS-26-T-277A, was posted on July 28, 2026, with responses due by August 3, 2026, and is administered by the Department of Defense’s Medical Supply Chain under the NAICS code 334511. Point of contact for inquiries is Dorothy Marquis, reachable via email or phone provided.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

BLOOD RECIPIENT SET, INThe contract specifies the procurement of 48 units of a Blood Recipient Set designed for indirect transfusion, featuring a Y-type blood and solution set with a standard large blood filter ranging from 170 to 260 microns and a pressure pump. The set includes two ClearLink Luer actuated valves, one positioned 6 inches and the other 42 inches from the male Luer lock adapter, with an approximate drop rate of 15 drops per milliliter and an overall length of approximately 99 inches or 2.5 meters. Each unit must be sealed in a protective container to prevent damage and shipped in commercial exterior packaging suitable for safe transport via common carriers at the lowest cost to the designated delivery point at Fort Bragg, North Carolina. All packaging and marking must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements apply. The NSN is 6515-01-593-0865, the solicitation number is SPE2DS-26-T-277W, bids are due by August 3, 2026, and delivery is required within 20 days of award. The item falls under NAICS code 334511 and is managed by the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

ELECTRODE GEL, ELECTROMThe contract specifies the procurement of electrode gel for electromedical use, supplied in packages of three 4 oz tubes, with a unit of issue as a single package. The product must be a mild, abrasive skin prepping gel designed to remove dry surface skin and moisten the corneum layer to enhance electrical conductivity and ensure high-quality EEG tracings. The gel must have a minimum shelf life of 36 months, with no more than five months elapsed between the date of manufacture and the date of delivery to the government. All units must be sealed in protective containers that prevent damage or breakage and must be packed in commercial exterior shipping containers suitable for safe delivery by common carrier at the lowest feasible rate to the designated delivery point at Fort Bliss, Texas, with a delivery deadline of 20 days after award. Marking must comply with Medical Marking Standard No. 1, replacing all prior references to MIL-STD-129, and copies of this standard are available through DLA Troop Support. The product is identified by NSN 6515-01-595-4854 and is subject to DLA packaging and technical requirements outlined in the DLA Master List of Technical and Quality Requirements. Bidders are required to provide their source and part number, and the solicitation, issued under SPE2DS-26-T-277Z, closed for responses on August 3, 2026, with the contract falling under NAICS code 334511 within the Department of Defense’s Medical Supply Chain.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

LASER LEVELING DEVICEThe contract specifies the procurement of a Laser Leveling Device for use with the Codman CSF External Drainage System, identified by NSN 6515-01-612-7325, with a quantity of ten units required. The device incorporates a reusable bubble level and a Class 2 laser lamp, designed to ensure precise alignment in medical settings. The unit is offered as each and must comply with technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed prior to return. Bidders are required to clearly state the source and part number being supplied. The solicitation number is SPE2DS-26-T-278W, issued by the Department of Defense’s Medical Supply Chain MD Surg FSF, with a response deadline of August 3, 2026, and delivery expected within 84 days of award. The point of contact for inquiries is Patrick Esposito, reachable via email and phone provided in the contract data.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

CABLE, INVASIVE BLOOD PThe contract specifies the procurement of an invasive blood pressure transducer cable with a right-angle Edwards connector, intended for use with oval transducers, under the NSN 6515016150921. Each unit is to be supplied as a single item, with no tolerance for quantity variance, and must be delivered within 20 days to Travis Air Force Base in California under FOB destination terms. The product is regulated by the FDA, requiring the contracting official to refer bidder and manufacturer details to a product specialist for confirmation prior to award. All packaging must comply with the DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951 and MIL-STD-129, and must be marked according to Medical Marking Standard No. 1. The cable must be shipped by traceable means only; parcel post is explicitly prohibited. Bidders must provide the exact source and part number being offered, with approved supplier part numbers including MCKESSON 802437 and ZOLL 8300-0787-01. The contract includes multiple CLIN entries for the same item to facilitate separate fulfillment or tracking, all with identical delivery, inspection, and packaging criteria. The required delivery date is July 29, 2026, and the solicitation was issued under SPE2DS-26-T-278N with a response deadline of August 3, 2026.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

RESUSCITATOR, HAND OThe contract specifies the procurement of six packages of pediatric hand-operated resuscitators, each package containing six units, for a total of 36 devices. The resuscitators are AMBU bags designed for pediatric use, featuring a latex-free construction, a manometer port, a child mask, a double swivel elbow, a removable accumulator, a PEEP valve, and a 40-inch oxygen reservoir tube. These devices meet exacting technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with compliance tied to the version of the master in effect at the time of solicitation or award. Packaging must adhere to DLA procurement standards, and any non-accepted supplies must have government identification removed prior to return. The item is identified by NSN 6515-01-585-5916 with a required delivery within 20 days of award. The solicitation, issued under SPE2DS-26-T-276X by the Department of Defense’s Medical Supply Chain, is targeted for performance at Fort Bliss, Texas, and falls under NAICS code 334511 for medical equipment manufacturing.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

COMPUTER SUBASSEMBLThis contract pertains to the procurement of three units of a computer subassembly identified by NSN 7050-01-538-5139 and part number 1756-OB32, supplied by ROCKWELL AUTOMATION, INC. The items must comply with stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. All supplies must be marked in accordance with MIL-STD-130N for identification and MIL-STD-129 for packaging marking, with no special marking required. Packaging must adhere to MIL-STD-2073-1E and DLA Packaging Requirements, including specific preservation, wrapping, and containment methods, and palletization must follow DLA guidelines. The item must not contain intentionally added mercury or mercury compounds, except in specified exceptions such as functional batteries or instruments, which must include secondary containment. The delivery is FOB origin, with inspection and acceptance occurring at the destination, under a zero variance tolerance. The required delivery date is 160 days from contract award, with a target ship date of January 18, 2027, and delivery must be made to the distribution depot in Bremerton, Washington. Compliance with CMMC Level 2 self-assessment is mandatory, and the contract is subject to Covered Defense Information requirements. The contract is issued under solicitation SPE8E9-26-T-3264, with a response deadline of August 10, 2026, and the items are classified under NAICS code 334511 for industrial control equipment manufacturing.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

COVER, ELECTRONIC COThe contract pertains to the procurement of 12 units of COVER, ELECTRONIC CO with NSN 5895-01-576-1316 under solicitation SPE7M8-26-T-5626, requiring delivery within five days FOB origin to the designated receiving point at Tobyhanna Army Depot, Pennsylvania. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards, and packaging must adhere to ASTM D3951 while also meeting MIL-STD-129 marking and labeling requirements. Packaging and palletization must follow RP001 DLA Packaging Requirements, and sampling for quality verification must align with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance unless otherwise stipulated. Attributes are to be classified with specified verification levels or AQLs, and any unspecified attributes are considered major. The unit of issue is each, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The shipment must be sent via the fastest traceable means excluding parcel post, with detailed shipping, receiving, and marking instructions provided through designated DLA codes. The required delivery date is July 27, 2026, and all technical specifications referenced in the DLA Master List take precedence over all other documents.

ELECTRICAL DEVICES DIV

POSTED

about 15 hours ago

DEADLINE

CASE, DEFIBRILLATOR-MONA molded soft carrying case designed specifically for the ZOLL PROPAQ MD defibrillator-monitor is being procured, constructed from vinyl with cushioned siding to safeguard the equipment during transport. Each unit is sold individually and must meet strict technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. The item is subject to DLA packaging requirements and mandates the removal of government identification from any non-accepted supplies. The procurement is identified by NSN 6515-01-615-0896 with a quantity of one unit and a required delivery within 20 days of award. The solicitation, issued under contract number SPE2DS-26-T-277K, was posted on July 28, 2026, with responses due by August 3, 2026, and falls under NAICS code 334511 for medical equipment manufacturing. Performance is to be delivered to Travis AFB, California, and all bidders must clearly specify the source and part number being offered. The procurement is managed by the Department of Defense’s Medical Supply Chain MD Surg FSF, with Aidan Martz listed as the primary point of contact.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 15 hours ago

DEADLINE

RECEIVER, COUNTERMEAThe contract prohibits the intentional addition of mercury or mercury-containing compounds to any hardware or supplies provided under this agreement, with specific exceptions for functional mercury used in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, and chemical analysis reagents explicitly approved by NAVSEA. Portable fluorescent lamps and portable instruments containing mercury must be shockproof and include a secondary containment boundary to prevent mercury leakage, in compliance with NAVSEA 5100-003D. Additional restrictions apply to preservation, packaging, packing, and marking materials, where mercury or mercury compounds are also forbidden under IP056. All packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Palletization must follow DLA packaging requirements, and shipment must be sent via the fastest traceable means, excluding parcel post, to the destination address for USS CAPE ST GEORGE CG 71 at FPO AP 96662. The item, a receiver countermeasure with NSN 586501-525-0343 and part number 237413-0001 manufactured by Marotta Controls Inc, is a critical application item requiring one unit delivered within 20 days FOB destination, with zero variance allowed in quantity. Inspection and acceptance occur at the destination. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise specified, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract incorporates technical and quality requirements from the DLA Master List, with CMMC Level 2 self-assessment required, and documentation for source approval must comply with RC001. Removal of government identification from non-accepted supplies and bare item marking are governed by RQ001 and RQ017. Delivery is subject to the Department of Defense’s authorized unit of issue and transportation protocols outlined in DLAD procedural notes, with the original required delivery date set for June 5, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

RING, RETAINING, OPTICALThe contract pertains to the procurement of 42 retaining rings for optical elements, identified by part number BNG-014-A5 and NSN 5855-01-613-3011, under solicitation SPE4A7-26-T-597W. Delivery is required within 20 days of award, with shipment destined for Fort Campbell, Kentucky, under FOB origin terms and no tolerance for quantity variance. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951, and packaging must conform to MIL-STD-129 and DLA-specific packaging guidelines under RP001. Sampling and inspection are governed by MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels or AQLs of VII/0.1, IV/1.0, and II/4.0 respectively, and zero non-conformances required unless explicitly waived. The item must be physically marked per RQ017 and shipped via traceable freight methods, excluding parcel post. The supplier must adhere to CMMC Level 2 self-assessment requirements, and government identification must be removed from non-accepted supplies. The contract specifies the unit of issue as PR, with a total price of $42.00, and the point of contact for inquiries is Soni Randolph of the Department of Defense. The required delivery date is July 22, 2026, though the need ship date field remains blank.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of State → US Embassy Mexico

Same awarding agency

Supply of Additional Lutron Networked Sensors and ControllersThe contract calls for the supply of additional Lutron networked sensors and controllers to support system repair and redundancy needs at the U.S. Embassy in Mexico. Key components include EC-MVS-2B-WH multiproc sensors for occupancy and daylight detection, GRX-TVI timeclock interfaces for automated scheduling, and QSE-IO modules for integration and control of building systems. These devices are essential for maintaining the reliability and functionality of the existing automation infrastructure, ensuring continued operation even during component failures or maintenance. The work is being performed under a subcontract and is classified under NAICS code 334511, which pertains to the manufacturing of electronic components and boards. Performance is located in Mexico, with the Department of State through the U.S. Embassy serving as the contracting entity. The solicitation was posted on July 28, 2026, and no set-aside criteria have been specified.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Lutron QSN-2ECO-S Energy Savr NodeThe contract requires the delivery of one Lutron QSN-2ECO-S Energy Savr Node to support occupancy and daylight harvesting functions within the Quantum system at the US Embassy in Mexico, with the goal of enhancing energy efficiency through automated control of lighting based on presence and natural light levels. The device is intended to integrate seamlessly into the existing building automation infrastructure to reduce unnecessary energy consumption without compromising functionality or comfort in embassy spaces. This subcontract is issued under the NAICS code 334511, which pertains to electronic component and accessory manufacturing, and the performance location is specified as Mexico City. The solicitation was posted on July 28, 2026, under the Department of State, with the US Embassy Mexico identified as the acting agency. No specific set-aside classification or point of contact is provided, and the contractual requirement is singularly focused on supplying the unit, with no additional services or installation details mentioned.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Lutron EC-DIR-WH Daylight Sensor with IR ReceiverThe contract is for the supply of a single Lutron EC-DIR-WH daylight sensor equipped with an IR receiver, designed to be mounted on a fixture to automatically adjust lighting levels in the U.S. Embassy in Mexico based on changes in ambient daylight. This device will enhance energy efficiency by reducing artificial lighting when natural light is sufficient, contributing to sustainable operations within the embassy facility. The sensor’s integrated IR receiver enables compatibility with existing control systems, allowing for seamless integration into the building’s automated lighting infrastructure. The contract falls under the NAICS code 334511 for lighting equipment manufacturing and is classified as a subcontract. It was posted on July 28, 2026, with performance taking place exclusively at the U.S. Embassy in Mexico City. The contracting agency is the U.S. Department of State, and while no specific point of contact or set-aside details are provided, the procurement is part of broader efforts to modernize and optimize embassy infrastructure through intelligent environmental controls. The solicitation number is not specified, and the opportunity can be accessed via the SAM.gov platform using the provided link.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 20 hours ago

DEADLINE

Supply of Lutron ECL-P-DIM-WH 0-10V LED Drivers (4 Units)Four units of Lutron ECL-P-DIM-WH 0-10V LED drivers must be supplied to power and dim LED fixtures throughout the US Embassy compound in Mexico. All units must be original equipment manufacturer products, delivered in their unmodified, factory-original condition, and fully compliant with technical specifications to ensure seamless integration with existing lighting systems. The contract is classified as a subcontract under NAICS code 334318 and is managed by the Department of State through the US Embassy in Mexico. Performance is required at the embassy location in Mexico City, and the solicitation was posted on July 28, 2026, with no set-aside classification applied.

POSTED

about 20 hours ago

DEADLINE

Supply of Lutron HI LUME LED DriversThe contract entails the procurement of genuine OEM Lutron HI LUME LED drivers specifically for the repair and maintenance of lighting control systems at the U.S. Embassy in Mexico. All components supplied must be new, unaltered, and fully compatible with the existing Lutron infrastructure to ensure seamless integration and continued operational integrity. The requirement emphasizes authenticity and performance fidelity, excluding any aftermarket, refurbished, or modified alternatives. The work is classified as a subcontract under NAICS code 334318 and is administered by the Department of State through the U.S. Embassy in Mexico, with performance obligations tied to the embassy’s location. The solicitation was posted on July 28, 2026, and no set-aside provisions have been designated.

POSTED

about 20 hours ago

DEADLINE

LUTRON Lighting Controllers & DriversThe U.S. Embassy in Mexico City’s Facility Management Office is soliciting brand-new Lutron lighting control components for the New Embassy Compound, requiring exact OEM part numbers with no substitutions permitted. The procurement covers a comprehensive range of Lutron-specific hardware including LED drivers, power modules, sensors, interface devices, switch inserts, and system hubs, all of which must be genuine, unmodified, and directly compatible with the existing proprietary Lutron ecosystem installed at the facility. The estimated contract value is $49,672.00 USD, and the acquisition is justified under FAR 13.106-1(b)(1) as a single-source brand-name purchase due to the unique engineering and integration requirements of the Lutron system, which precludes the use of alternative or third-party components. All items must be delivered to the New Embassy Compound in Mexico City, with inspection and acceptance conducted by the U.S. Department of State at the location of performance. Offerors must be actively registered in SAM.gov at the time of submission, as failure to register renders proposals nonresponsive per FAR 4.1102(a); a UEI is required through this registration, though no separate CAGE code submission is specified. Electronic responses are permitted via SAM.gov, but the formal Request for Quotation has not yet been issued and will include detailed part numbers, quantities, and delivery instructions. While no formal evaluation factors, packaging specifications, invoicing methods, or payment details are outlined, the procurement is expected to be awarded on a firm-fixed-price basis under simplified acquisition procedures, with contract oversight provided by Morgan Osborne as Contracting Officer and David Marshall as the Contracting Officer’s Technical Representative. The requirement supports long-term operational continuity of the embassy’s lighting infrastructure, emphasizing system integrity, warranty preservation, and reliance on OEM-approved hardware only.

Commercial, Industrial, and Institutional Electric Lighting Fixture Manufacturing

POSTED

about 20 hours ago

DEADLINE

MEX-NEC SCAFFOLDING FOR COOLING TOWERS PREVENTIVE MAINTENANCEThe U.S. Embassy in Mexico City is preparing to issue a solicitation for a complete modular scaffolding system to facilitate preventive maintenance at the Cooling Tower Area of the New Embassy Compound. The system must provide safe, reliable access for maintenance personnel working on exterior mechanical equipment and must meet or exceed all applicable technical, safety, dimensional, and documentation standards without requiring a specific brand or proprietary design. All components must be brand new, free from defects such as corrosion, deformation, cracks, or missing parts, and must be in fully serviceable condition. The contract is not subject to any set-aside provisions and is open to all qualified vendors. Proposers must be actively registered in the System for Award Management (SAM) at the time of submission, as failure to do so will result in non-responsiveness. Electronic responses are accepted, and quotes must be submitted no later than August 7, 2026, at 6:00 a.m. Eastern Time. Detailed specifications and delivery requirements will be provided in the official Request for Quotation upon publication on SAM.gov, with the solicitation expected to be posted on July 23, 2026. For registration guidance, vendors should refer to the SAM.gov entity landing page. Primary point of contact for inquiries is Morgan Osborne, with secondary support provided by Mario Velarde, both reachable through the designated embassy email address.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Safety Compliance and On-Site SupervisionAll work under this subcontract must strictly adhere to U.S. Embassy safety standards, requiring full compliance with personal protective equipment protocols, welding safety procedures, fire prevention measures, and proper barricading of work zones. The contractor is implicitly responsible for on-site safety oversight, ensuring that all activities are conducted in a manner that protects personnel and property while meeting the rigorous safety expectations of the U.S. Department of State. The contract is tied to performance at the U.S. Embassy in Mexico and is categorized under NAICS code 541611, indicating it involves management consulting services related to safety compliance and operational supervision. Responses are due by August 17, 2026, with no set-aside provisions specified and no designated point of contact provided.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Specialty Materials Supply (Paint, Sealants, Cantera Stone)The contract pertains to the supply of specialty materials including high-quality paints, sealants, and matching Cantera stone for use in façade, stone, and deck applications across a U.S. Embassy project in Mexico. All materials must meet stringent quality standards and are subject to prior written approval by the Contracting Officer Representative before delivery or installation. The work is classified as a subcontract under NAICS code 423330, indicating the nature of the business involves merchant wholesaling of construction materials. The opportunity was posted on July 13, 2026, with a response deadline of August 17, 2026, at 7:00 PM, and the performance location is specifically designated as Mexico. The agency responsible is the U.S. Department of State through the U.S. Embassy in Mexico, and while no set-aside designation is specified, the process remains highly regulated with strict compliance requirements for material selection and approval.

Roofing, Siding, and Insulation Material Merchant Wholesalers

POSTED

DEADLINE

Parking Area, North Wall, and Pool Deck RefurbishmentThe contract entails the refurbishment of the parking area access, the adjacent building’s north wall, and the pool deck area, with work including surface repair, sealing, painting, and ensuring full compliance with safety standards. The scope is focused on restoring and maintaining critical infrastructure elements to meet operational and regulatory requirements. All work must be executed to high durability and aesthetic standards, with particular attention to weather resistance and slip resistance in high-traffic zones. The contract is classified as a subcontract under NAICS code 237310, which pertains to highway, street, and bridge construction, indicating its alignment with civil infrastructure projects. It was posted on July 13, 2026, with a response deadline of August 17, 2026, and is managed by the U.S. Embassy in Mexico under the Department of State. Performance of the work is required to occur in Mexico, though no specific address or contact details are provided, and the solicitation does not indicate any small business set-aside provisions. The project is listed on SAM.gov with a public link for further reference.

Highway, Street, and Bridge Construction

POSTED

DEADLINE

Cantera Stone Repair and RestorationThe contract involves the selective repair, sealing, and restoration of Cantera stone elements at the US Embassy in Mexico, focusing on window perimeters, cornices, and interior architectural features. Work includes the precise replacement of missing or deteriorated stone components using materials that are historically and compatibly matched to preserve the original aesthetics and structural integrity of the building. The scope emphasizes conservation techniques that respect the cultural and architectural significance of the embassy’s design while ensuring long-term durability against environmental exposure. This subcontract opportunity, posted on July 13, 2026, with a response deadline of August 17, 2026, falls under NAICS code 238990 for other special trade contractors. The place of performance is Mexico City, and the contracting agency is the U.S. Department of State through the U.S. Embassy in Mexico. No set-aside type is specified, and the work requires specialized craftsmanship in stone restoration, with an expectation of adherence to preservation standards. Interested parties must submit proposals by the stated deadline to be considered for award.

All Other Specialty Trade Contractors

POSTED

DEADLINE

Exterior and Interior Façade PaintingThe contract entails comprehensive surface preparation, cleaning, priming, and painting services for building façades both exterior and interior, encompassing all associated elements such as handrails, metal pipes, joints, and window protection components. Work is required to meet strict aesthetic and protective standards, ensuring long-term durability and visual consistency across all surfaces. The scope demands meticulous attention to detail and adherence to safety and quality protocols in a high-visibility international setting. Issued as a subcontract under NAICS code 238320, the opportunity is managed by the U.S. Department of State through the U.S. Embassy in Mexico, with performance location firmly set in Mexico City. The solicitation was posted on July 13, 2026, and responses must be submitted by August 17, 2026, at 7:00 p.m. local time. No set-aside designation is specified, and while additional details such as point of contact or exact address are not provided, interested parties must navigate the official SAM.gov portal to access full submission requirements and technical specifications.

Painting and Wall Covering Contractors

POSTED

DEADLINE