Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Technical Documentation and Manual Development

Active

State & Local

Response Deadline08/21/2026, 06:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the development of comprehensive operation, maintenance, and safety manuals for delivered concrete saws, fully aligned with the technical specifications and warranty standards set by the Iowa Department of Transportation. The work must meet all required regulatory and performance benchmarks to ensure end-users receive clear, accurate, and compliant documentation that supports safe and efficient equipment use. The project is structured as a subcontract under NAICS code 541830, which pertains to technical writing services, and is open for proposals with a deadline of August 21, 2026. The contract is administered by the Iowa agency, with performance expected to meet state-specific operational and safety protocols. All deliverables must be thoroughly reviewed for accuracy, usability, and adherence to Iowa DOT mandates without reliance on external citations or proprietary references.

General Info

Develop operation, maintenance, and safety manuals for concrete saws per Iowa DOT specs by August 21, 2026.

Agency

IowaView Agency

NAICS

541830 - Media Buying AgenciesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 31

subcontract

Response DeadlineAug 21

Submission deadline

Response Deadline

08/21/2026, 06:00:00 PM UTCin 20 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyIowa

ContactsNo contacts available

OfficeN/A

Organization / Agency

Iowa

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Development of operation, maintenance, and safety manuals for delivered concrete saws, compliant with Iowa DOT technical and warranty requirements.

Similar Contracts

Same NAICS industry code

Executive Council - Notice of Planned Procurement - Executive Council- Notice of Planned Procurement-Integrated Media Planning and Buying

Solicitation # AB-2026-05428

The Government of Alberta is preparing to procure Integrated Media Planning and Buying Services through a forthcoming solicitation under AB-2026-05428, with a vendor engagement session scheduled for August 6th, 2026, to provide market input and clarify expectations. This initiative seeks a comprehensive, coordinated approach to managing advertising activities across multiple media channels, emphasizing strategic planning, media buying, optimization, and performance reporting to ensure consistent messaging, fiscal efficiency, and measurable public outcomes. The session is voluntary and non-binding, designed solely to foster transparency and gather industry feedback to shape a competitive, innovative, and value-driven procurement strategy without granting any participant an advantage in future bidding. Interested suppliers are encouraged to participate to better understand the government’s objectives, navigate media landscape challenges, and contribute to shaping a fair and effective procurement process. The procurement is led by the Executive Council, with Ajibola Hassan, Senior Category Specialist, serving as the primary point of contact via exc.cmd@gov.ab.ca. While no NAICS code or set-aside details are specified, the effort is focused on Alberta-wide implementation, with all performance expected to occur within the province. The solicitation will be formally released following this engagement phase, and all relevant details, including the virtual meeting link, are available through the official Alberta purchasing portal. Participation in the session does not obligate attendance in the RFP process but offers a valuable opportunity for suppliers to align their capabilities with the government’s goals and refine their approach ahead of the formal competition.

Executive Council

POSTED

DEADLINE

Technical Writing and Guide Development for PractitionersThe contract seeks a contractor to draft and revise user-friendly chapters for the Countermeasures That Work and Countermeasures At Work guides, transforming research-based findings into clear, practical guidance tailored for state and local transportation and safety agencies. The work involves aligning technical content with real-world implementation needs, ensuring accessibility and usability for non-research audiences, with a focus on actionable recommendations that support effective safety program execution. The deliverables must reflect current best practices and be structured to facilitate adoption across diverse jurisdictional contexts. The contract is classified as a subcontract under NAICS code 541830, administered by the Department of Transportation’s National Highway Traffic Safety Administration through its Office of Acquisition. The performance location is Washington, D.C., with a bid deadline of August 20, 2026, and the opportunity was posted on July 30, 2026. While no set-aside designation is specified, the work requires strong technical writing skills, familiarity with transportation safety literature, and experience translating complex data into plain-language guidance suitable for frontline practitioners. Delivery of high-quality, polished chapters that enhance the utility of these widely referenced guides is the central objective.

693JJ9 Nhtsa Office Of Acquistion

POSTED

DEADLINE

Design and Layout ServicesGeorgia College and State University is seeking qualified vendors to provide graphic design, layout, and prepress preparation services for printed materials, ensuring strict adherence to brand guidelines and print readiness standards. The solicitation, categorized under NAICS code 541830 for advertising and related services, is structured as a subcontract opportunity with a response deadline of August 10, 2026, at 3:00 PM Eastern Time, following a posting date of July 28, 2026. All work must be performed to meet high-quality specifications that maintain visual and technical consistency across all printed outputs. There is no set-aside designation specified, and while the agency’s location is identified as Georgia, specific performance address details are not provided. Interested parties must submit proposals through the official portal linked in the solicitation to be considered for award.

Georgia College and State University

POSTED

DEADLINE

Technical Editing and AFR FormattingThe contract involves the final technical editing and formatting of the Annual Financial Report (AFR) to ensure full compliance with New York State Comptroller standards. This includes comprehensive layout adjustments, professional formatting, creation of a detailed table of contents, accurate cross-references, a complete subject index, and the production of an accessible PDF that meets all required accessibility guidelines. The work is critical to ensuring the document is professionally presented, fully navigable, and compliant with state mandates for public financial reporting. This subcontract is open for response until August 14, 2026, and falls under NAICS code 541830, which covers other scientific and technical consulting services. The contracting entity is the New York State Treasurer’s office, with performance expected to be conducted in coordination with state requirements, though no specific location for performance is listed. The solicitation was posted on July 28, 2026, and interested parties must submit proposals by the listed deadline to be considered for award.

POSTED

DEADLINE

Technical Documentation & Data Rights ProvisionThe contract requires the preparation and delivery of comprehensive technical documentation and data rights for GCUs, including CAD models, schematics, and associated data packages that meet stringent DFARS compliance standards. All deliverables must be accurately documented and accompanied by clear licensing terms that define usage, reproduction, and distribution rights in accordance with federal defense acquisition regulations. The work entails ensuring full alignment with technical and legal requirements for data rights management under Department of Defense standards. The contract is a subcontract under the DLA Land At Aberdeen agency, with performance taking place at Aberdeen Proving Ground, Maryland, zip code 21005. It is posted under NAICS code 541830 and has a response deadline of August 11, 2026, with a posted date of July 28, 2026. The subcontractor must be prepared to fulfill all technical, administrative, and regulatory obligations for the provision of technical data and documentation without reliance on external file citations or unsupported assumptions, ensuring full compliance with defense contracting protocols.

DLA Land At Aberdeen

POSTED

DEADLINE

Technical Documentation and Manuals ProvisionThe contract seeks the development and delivery of comprehensive technical manuals for operation, maintenance, and troubleshooting, ensuring full compliance with VAAR 852.211-70 and Section 508 accessibility standards. These manuals must be precisely structured to support end-user functionality, meet federal documentation requirements, and provide clear, accessible guidance for individuals with disabilities, including those using assistive technologies. The deliverables are critical for maintaining operational readiness and regulatory alignment within Department of Veterans Affairs systems. This is a subcontract under NAICS code 541830, issued by the 256-NETWORK Contract Office 16 (36C256), with a response deadline of August 7, 2026. The work will support government operations but the specific location of performance is not designated. Interested parties must submit proposals prior to the deadline, and all documentation must adhere strictly to federal accessibility mandates and the stipulated regulatory framework. There is no set-aside designation, and the procurement is open to qualified subcontractors capable of delivering high-quality, compliant technical manuals under tight federal standards.

256-NETWORK Contract Office 16 (36C256)

POSTED

DEADLINE

Report Writing & Plan DocumentationThe City of El Cerrito has issued a subcontract seeking professional report writing and plan documentation services to compile technical findings into a comprehensive Local Road Safety Plan. This plan must adhere to established standards set by Caltrans and the Federal Highway Administration, ensuring regulatory compliance and operational effectiveness. The deliverable is expected to be professionally formatted and accessible to stakeholders, integrating data, analysis, and safety recommendations into a cohesive document suitable for public and governmental review. The work is classified under NAICS code 541830, indicating it falls within the scope of scientific and technical consulting services. The contract was posted on July 28, 2026, and performance is to be carried out in El Cerrito, California. While no solicitation number or point of contact is provided, the project is linked through the CEQA Net portal for further reference. This subcontract supports local infrastructure safety initiatives by translating complex technical data into actionable, policy-ready documentation aligned with state and federal transportation safety frameworks.

City of El Cerrito

POSTED

DEADLINE

Reporting and Knowledge Mobilization (Culturally Adapted)The contract seeks to develop culturally appropriate final reports, summaries, and knowledge products that incorporate Indigenous storytelling and visual communication methods, ensuring that outputs resonate with and respect the traditions, values, and worldviews of Indigenous communities. The work must go beyond conventional reporting formats, emphasizing oral traditions, imagery, symbols, and community-centered narratives to effectively convey findings and build trust. The deliverables are intended to support knowledge mobilization, making complex information accessible and meaningful to Indigenous audiences while honoring their methodologies of communication and knowledge transfer. This subcontract is issued by the Workers Safety and Compensation Commission under the Government of Canada, with performance expected across Canada’s Northwest Territories and Nunavut Territory. The opportunity was posted on July 28, 2026, with responses due by August 25, 2026, and is classified under NAICS code 541830 for advertising and related services. While no specific set-aside criteria or point of contact are provided, the emphasis on culturally adapted outputs indicates a clear need for bidders to have demonstrated experience working directly with Indigenous communities, understanding their protocols, and producing content through collaborative, respectful, and community-led processes.

Workers Safety and Compensation Commission

POSTED

DEADLINE

Interactive Electronic Technical Manual (IETM) Development & S1000D ComplianceThe contract requires the development and ongoing maintenance of 660 Interactive Electronic Technical Manuals (IETMs) fully compliant with the S1000D Issue 4.1 standard in XML format. This includes the full lifecycle authoring of data modules, precise configuration management, rigorous change tracking to ensure accuracy and traceability, and the creation of bilingual content to meet Canadian federal language requirements. The work demands expertise in technical documentation standards, structured authoring, and XML-based publishing systems to deliver reliable, searchable, and up-to-date technical information for equipment users and maintenance personnel. The contract is classified as a subcontract under NAICS code 541830 and is issued by the Department of National Defence of the Government of Canada, with performance expected to occur within Canada. The solicitation was posted on July 28, 2026, and responses are due by August 28, 2026. While no specific point of contact or detailed location is provided, the place of performance is indicated as Canada, and the opportunity is accessible via the Canada Buys procurement portal. All deliverables must adhere strictly to S1000D Issue 4.1 specifications to ensure interoperability, reusability, and alignment with existing defense documentation systems.

Department of National Defence

POSTED

DEADLINE

Print Advertising & Publication PlacementThe contract seeks a subcontractor to coordinate and place print advertisements across international, state, and local publications to enhance the visibility of the North Carolina Ports Authority and promote trade outreach initiatives. The work involves strategic placement of ads in relevant media channels to reach key audiences engaged in global and regional commerce, with the goal of strengthening the port’s market presence and supporting economic development efforts related to maritime trade. The solicitation is classified under NAICS code 541830, indicating it pertains to advertising services, and is structured as a subcontract opportunity without a specific set-aside designation. The posting date is July 28, 2026, with a response deadline of August 18, 2026, providing potential vendors approximately three weeks to submit proposals. The contracting entity is the State of North Carolina through its Ports Authority, and while no specific office address or point of contact is listed, the place of performance is tied to North Carolina operations. Interested parties must submit their responses through the official state portal linked in the solicitation, and the scope requires an understanding of both domestic and international media landscapes to effectively support the port’s outreach objectives.

State of NC - Ports Authority

POSTED

DEADLINE

Technical Documentation and User Manual DeliveryThe contract requires the production and delivery of comprehensive technical documentation for a wirebond-pull tester, including both electronic and printed versions of full installation and user manuals. These manuals must provide detailed utility requirements, operational guidance, and clear instructions to ensure proper setup and use of the equipment. All deliverables must meet precise technical standards and be tailored to support end-user functionality across multiple formats. The solicitation is issued as a subcontract under NAICS code 541830 by the Department of Commerce, with performance required in Boulder, Colorado, at ZIP code 80305. Responses are due by August 6, 2026, and the opportunity was posted on July 27, 2026. The contract focuses exclusively on the creation and delivery of high-quality documentation, with no indication of additional services or equipment procurement. The place of performance and the nature of the deliverables suggest the work will be conducted remotely or locally by a technical documentation provider with expertise in scientific instrumentation manuals.

Department Of Commerce

POSTED

DEADLINE

Scientific Reporting & Technical WritingThe contract under the title Scientific Reporting & Technical Writing requires the preparation of a comprehensive final report that details the methods utilized, results obtained, any deviations encountered, and concluding analyses, with an emphasis on technical accuracy, clarity, and full compliance with government submission standards. The deliverable must meet federal expectations for documentation, ensuring that all information is presented in a manner suitable for official review and archival by the agency. The work is structured as a subcontract under NAICS code 541830, falling under the Department of Health and Human Services, specifically the CDC Office of Acquisition Services, and is intended to support scientific and technical communication efforts aligned with public health objectives. The solicitation was posted on July 27, 2026, with a response deadline of August 10, 2026, at 4:00 PM, indicating a narrow window for proposal submission. The place of performance and point of contact details are not specified, suggesting flexibility in location or that coordination will be handled post-award. There is no set-aside designation, meaning the opportunity is open to all eligible contractors. While no specific performance location is outlined, the deliverable is expected to meet stringent federal reporting requirements, implying that the contractor must be adept at navigating federal scientific documentation protocols and capable of producing high-quality, audit-ready technical content.

CDC Office Of Acquisition Services

POSTED

DEADLINE

More opportunities from Iowa

Same awarding agency

Specialty Vehicle Delivery and Logistics to Remote SiteThe contract entails the final-mile delivery of a specialty utility terrain vehicle to the Sugema Wildlife Unit, with full responsibility for freight handling, transportation insurance, and guaranteed on-time arrival no later than September 30, 2026. The scope requires end-to-end logistics coordination to ensure the vehicle reaches a remote location without damage or delay, adhering to strict compliance standards for safe transport in challenging environments. All risks during transit, including potential damage, loss, or scheduling failure, are borne by the contractor, who must demonstrate proven capability in handling high-value, sensitive equipment to isolated areas. This is a subcontract under NAICS code 484220, reflecting its classification as a specialized truck transportation service. The solicitation was posted on July 31, 2026, with bids due by August 21, 2026, and is managed by the State of Iowa through its agency portal. While specific performance locations and contact details are not enumerated, the place of performance is identified as a remote wildlife site requiring precise logistical planning. The contractor must meet all operational requirements without reliance on external support and will be held accountable for full delivery compliance as stipulated in the agreement.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 23 hours ago

DEADLINE

Aftermarket Suspension Upgrade Supply (Alternative Compliance Option)The contract seeks the supply of heavy-duty suspension components, such as S3 Powersports HD Springs or functionally equivalent alternatives, intended for integration into off-road utility task vehicles to meet regulatory compliance standards. Bidders must provide comprehensive technical documentation demonstrating the performance, durability, and safety attributes of their components, with a specific requirement to secure approval from the Department of Natural Resources to establish equivalency to approved systems. The procurement is structured as a subcontract tied to a broader compliance initiative, and the North American Industry Classification System code 336340 indicates the focus on motor vehicle parts manufacturing. All proposals must be submitted by the deadline of August 21, 2026, and interested parties should access the official solicitation portal for detailed submission guidelines and additional requirements.

Motor Vehicle Brake System Manufacturing

POSTED

about 23 hours ago

DEADLINE

Supply of Heavy-Duty Utility Task Vehicle (UTV) with Upgraded SuspensionThe contract requires the supply and delivery of one new 2026 Can-Am Defender 6x6 Limited or an equivalent utility task vehicle (UTV) equipped with heavy-duty suspension, an enclosed cab, full HVAC capability, a winch, and a reinforced front bumper. The vendor must be an authorized representative of the original equipment manufacturer and is expected to deliver a vehicle meeting or exceeding the specified rugged specifications suited for demanding operational environments. The vehicle must be brand new, with all included components fully functional and factory-installed to ensure reliability and performance under strenuous conditions. This is a subcontract solicitation posted on July 31, 2026, with a response deadline of August 21, 2026, and falls under NAICS code 336120 for motor vehicle manufacturing. The contracting agency is the State of Iowa, with no additional details provided on the office location or point of contact. All bids must be submitted through the designated online portal linked in the solicitation, and the place of performance has not been specified, implying delivery may be required to any designated location within the state or as further determined by the agency. The requirement emphasizes compliance with OEM standards and the provision of a high-performance UTV capable of supporting heavy-duty utility operations.

Heavy Duty Truck Manufacturing

POSTED

about 23 hours ago

DEADLINE

27CRDWBCLULL-0010G - CanAm Defender (Syfert)

Solicitation # 27CRDWBCLULL-0010G

The Iowa Department of Natural Resources is soliciting bids for the purchase of a new 2026 Can-Am Defender 6x6 Limited equipped with upgraded heavy duty springs or a state-approved equivalent, intended for use in state operations. While the Can-Am Defender is cited as a reference model, vendors are encouraged to propose comparable vehicles that meet or exceed the stated functional requirements, provided they submit full technical specifications and clearly note any deviations from the reference specifications for evaluation. Only authorized manufacturer representatives eligible to honor the full manufacturer’s warranty may respond to this solicitation. All proposals must be submitted through the designated online portal, where respondents are required to save progress frequently, especially after uploading documents, and must recertify and resubmit their bid each time they reopen it after initial submission, even if no changes were made. Any amendments issued by the issuing officer must be reviewed and acknowledged by respondents, who are then required to certify and resubmit their proposal to remain eligible, although previously entered information will be retained. The solicitation opens on July 31, 2026, with a firm deadline for responses on August 21, 2026, at 7:00 PM, and all submissions must follow the guidelines posted on the Iowa DNR’s official RFP and bid letting website. Point of contact for inquiries is Colton Lullmann, reachable via email.

Motorcycle, ATV, and All Other Motor Vehicle Dealers

POSTED

about 23 hours ago

DEADLINE

Substitution and Compliance Support (Engineering/Testing)The contract involves providing engineering and testing support to a prime bidder for the preparation of a Pre-Bid Request for Substitutions, with a focus on delivering detailed performance data, technical specifications, and justifications for equipment that is not listed in the original specifications. This effort requires thorough technical analysis to demonstrate equivalency of non-listed items, ensuring compliance with project requirements and procurement standards. The work is time-sensitive, with a response deadline set for August 24, 2026, and was posted on July 31, 2026, indicating a compressed timeline for research, documentation, and submission. The contract is categorized as a subcontract under NAICS code 541330, which corresponds to engineering services, and is associated with the Iowa state agency. While specific details about the place of performance or point of contact are not provided, the work is expected to be conducted remotely or in coordination with the prime bidder’s team. Interested parties must access the opportunity via the designated UI link to obtain full solicitation details and submit proposals before the deadline. The nature of the task demands expertise in technical documentation, regulatory compliance, and the ability to defend equipment substitutions with credible, verifiable data.

Engineering Services

POSTED

DEADLINE

Technical Documentation and Manual ProductionThe contract requires the production and delivery of three comprehensive manuals—operator, service, and parts—for a guardrail mower, each presented in a clear, well-labeled format that may be delivered electronically or in printed form. These manuals must be technically accurate and user-friendly, ensuring proper use, maintenance, and component identification for end users. The work is part of a subcontract under the NAICS code 541611, targeting technical documentation services, and is issued by the state of Iowa with a response deadline of August 24, 2026, following a posting on July 31, 2026. All deliverables must meet specified quality standards without guidance on format preference, allowing flexibility between digital and physical outputs as long as clarity and labeling requirements are fully satisfied.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Operator Training ServicesThe contract requires the provision of comprehensive hands-on operator training for Iowa DOT crews on the safe and effective use of a new guardrail mower. Training must cover all essential operational aspects including system controls, routine maintenance protocols, and emergency response procedures to ensure crew safety and equipment longevity. The training is designed to be practical and field-oriented, directly addressing the needs of personnel who will be operating the machinery in real-world conditions across Iowa’s roadways. Subcontractors responding to this solicitation must be prepared to deliver training that aligns with industry best practices and state safety standards, with all instruction taking place in the field where the equipment will be used. The opportunity was posted on July 31, 2026, and responses are due by August 24, 2026, under NAICS code 611519 for other schools and instruction. There is no formal set-aside designation, and the work is to be performed statewide with no specified location restrictions beyond the scope of Iowa DOT operations.

Other Technical and Trade Schools

POSTED

DEADLINE

On-Site Installation Support and Technician ServicesA qualified field technician will be required to provide on-site support for the mechanical and hydraulic installation of a guardrail mower at the Iowa DOT’s Central Repair Shop in Ames, Iowa. The contract calls for hands-on technical expertise to ensure proper assembly, integration, and functional verification of the equipment in a controlled facility environment, with the technician expected to work directly at the shop location during the installation process. The work falls under NAICS code 811490, indicating it involves other miscellaneous repair and maintenance services, and is structured as a subcontract opportunity with a response deadline of August 24, 2026, following a posting date of July 31, 2026. All activities must be performed in compliance with Iowa DOT standards and protocols, though specific terms such as contract duration, payment structure, or performance metrics are not detailed here.

Other Personal and Household Goods Repair and Maintenance

POSTED

DEADLINE

Guardrail Mower Supply and ManufacturingThe contract calls for the supply and manufacturing of a specialized 3-point mounted guardrail mower designed for efficient and safe operation along roadways and rights-of-way. The equipment features dual independently driven cutting heads to ensure precise trimming on both sides of guardrails, with a 60-inch straddle clearance that allows the mower to navigate between railings without requiring excessive repositioning. Automatic post maneuvering enables the machine to detect and adjust around vertical support posts, minimizing operator intervention and enhancing productivity. Hydraulic tilt functionality provides the ability to adjust the cutting angle to match uneven terrain or varying rail profiles, while PTO-driven operation at 1000 RPM ensures compatibility with standard agricultural and utility tractor power take-off systems. The design prioritizes durability, precision, and operational reliability in demanding roadside maintenance environments. This is a subcontract under the NAICS code 333111 for agricultural, construction, and mining machinery manufacturing, solicited by the State of Iowa with a response deadline of August 24, 2026. The posting date indicates the opportunity was made available on July 31, 2026, and the place of performance remains unspecified, suggesting the equipment may be delivered to various state-maintained locations statewide. Interested parties should submit proposals through the provided online portal before the deadline, and all technical specifications must be met to ensure compliance with Iowa’s operational and safety standards for roadside vegetation management equipment.

Farm Machinery and Equipment Manufacturing

POSTED

DEADLINE

Alternate Brand Substitution Engineering & CertificationThe contract requires engineering evaluation and certification of alternative brand concrete saws to verify compliance with Iowa DOT specifications through the formal substitution process. This work involves technical analysis of non-standard equipment to ensure performance, safety, and regulatory alignment with state transportation infrastructure requirements, with the goal of approving substitutes for approved primary brands. All submissions must be thoroughly documented and validated to meet the rigorous standards expected by the Iowa Department of Transportation. The solicitation is open as a subcontract with a response deadline of August 21, 2026, and is classified under NAICS code 541330, indicating professional, scientific, and technical services related to engineering. The contracting entity is the State of Iowa, and all work is expected to support state infrastructure operations. Interested parties must submit evaluations and certifications by the specified deadline to be considered, and performance will be reviewed against established technical criteria to determine eligibility for substitution approval.

Engineering Services

POSTED

DEADLINE

Warranty and Field Service SupportThe contract seeks a contractor to provide warranty-backed repair, maintenance, and field service support for concrete saws used across Iowa DOT operations. This subcontract requires the vendor to deliver timely and reliable technical services to ensure the continued operational readiness of equipment, with all work backed by a warranty to guarantee quality and performance. Services must be performed across the state of Iowa, covering all necessary field locations where concrete saws are deployed for infrastructure projects. The contractor is expected to respond to service requests promptly, perform diagnostics and repairs, replace defective parts under warranty, and maintain detailed service records to meet Iowa DOT’s operational and compliance standards. The solicitation was posted on July 31, 2026, with responses due by August 21, 2026, and falls under NAICS code 811310 for commercial and industrial machinery and equipment repair and maintenance. The contract is structured as a subcontract, and while no set-aside provisions are specified, bidders must be prepared to meet all technical and logistical demands of supporting state-mandated infrastructure maintenance activities. The point of contact and exact performance locations are not listed, but services will be required statewide, and all work must align with Iowa DOT’s operational protocols. Interested parties can access additional details through the provided UI link on the Sciquest platform.

Commercial and Industrial Machinery and Equipment (except Automotive and Electronic) Repair and Maintenance

POSTED

DEADLINE

Heavy-Duty Diesel Concrete Saws SupplyIowa DOT is seeking suppliers to provide heavy-duty diesel-powered concrete saws equipped with a 48 HP engine, 36-inch cutting depth, hydrostatic drive, and an integrated water coolant system for use on state highway projects. These machines must meet robust performance standards to handle continuous, high-demand cutting operations in demanding construction environments. The contract is structured as a subcontract and falls under NAICS code 333120, which classifies it within the construction machinery manufacturing sector. Responses are due by August 21, 2026, with the solicitation published on July 31, 2026, providing a three-week window for vendor submissions. All equipment will be delivered and used solely for performance at Iowa DOT highway project sites, though specific delivery locations are not yet defined. The procurement does not specify any set-aside provisions, meaning participation is open to all qualifying vendors regardless of business size or status. Interested parties must access the official bidding portal via the provided link to submit proposals and review detailed technical requirements.

Construction Machinery Manufacturing

POSTED

DEADLINE